Each kit includes all the bolts and washers required to successfully rebuild your chain guide.
Are your pedals in need of some TLC? This is a rebuild kit for Nukeproof Urchin pedals, which will bring pedal performance back to the same level as when they were brand new. A guide for rebuilding your Nukeproof Flat pedal can be found here.
This is a replacement SRAM Universal Derailleur Hanger (UDH) made by Nukeproof. This hanger is fully compatible for any frame which uses a SRAM UDH hanger including the 2021 Nukeproof Mega & Giga bikes. The UDH is designed to rotate rearward in the event of an impact and features the ability to “re-rail” the chain back onto the small cog The UDH works with all brands of drivetrain, not just SRAM. Please note: If your frame does not currently have a UDH hanger fitted, this will not be compatible
This rear thru-axle is equipped with a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike adventures. This makes it a great choice of upgrade for riders who need to replace a damaged or lost stock axle from their frame. The axle has a washer which helps to reduce pressure on the frame dropouts and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness and prevent the axle from getting stuck when you want to remove it. Nukeproof have created a printable guide that you can use to measure your old axle against and check the exact dimensions to ensure you are selecting the correct axle. It can be downloaded here All axles are a 6mm hex on the non-drive side and have a backup hex on the drive-side allowing the axle to be tightened and loosened from either side of the bike. Always apply a small amount of grease to the axle and threads when installing your axle. Diameter Axle Length Thread Pitch Thread Pitch Rear 12mm 164mm 1.5 13mm Rear 12mm 170mm 1.5 13mm Rear 12mm 174mm 1.75 20mm Rear 12mm 175mm 1.5 12mm Rear 12mm 180mm 1.75 20mm Rear 12mm 180mm 1 13mm Rear 12mm 181mm 1.5 20mm
Genuine replacement Nukeproof rebuild kit.
Keeps clothes clean from dust and dirt.
Pulled your hydraulic brake lever with the wheel out? Why not have a handy tool to undo your blunder? Perfect tool for brake servicing and pad replacement.
Join the handlebar tape of the pros and enjoy this comfortable, grippy, microfiber tape. Prologo Microtouch is likely to appeal to a wide range of cyclists, thanks to its perforated design designed to improve ventilation.
Universal Bike Cleaner The Mobi Eco Bike Cleaner Concentrate ican be used on all surfaces, including all paintwork and clear coat finishes. So, whether you're clocking up winter miles on a road bike, tackling muddy cyclocross courses, or the worst trails, the Mobi Eco Bike Cleaner Concentrate is ready to restore your bike to its former glory. Fast Acting Formula The fast acting formula will get to work straight away. Simply use one part concentrate to four parts water for the perfect strength bike cleaner. The formula penetrates dirt and grime to make light work of cleaning your bike. Eco Friendly Mobi's Eco range has been designed for effective bike maintenance with minimal environmental impact. By maximising the use of sustainable ingredients from natural sources, Mobi's Eco range is readily biodegradeable and free from petro-chemicals and other toxins. Not only will you ride a cleaner, fast bike, but you'll be looking after the environment at the same time.
Proprietary Pad Compound The proprietary pad compound that Prime uses in these pads has been manufactured in conjunction with industry-leading pad manufacturer BrakeCO. Extensively Tested to Provide Maximum Performance This pad has been tested in both simulated and real-world conditions to offer the best possible braking performance when used with the brake tracks on Prime carbon road rims. Enhanced Wet Weather Braking Performance Prime has added channels to quickly and efficiently displace water from the brake track in wet conditions to enhance wet weather braking performance; these also have the added benefit of allowing air to pass through in dry weather conditions, which helps to keep the pads and rim from overheating under prolonged periods of braking. Recommended for Use with All Carbon Rims While optimised for use with Prime rims, Prime Pro brake pads are compatible with any carbon rim to ensure powerful braking performance in all weather conditions.
Waterproof garments will, over time, lose some of the effectiveness of their water-repellent surface finishes. However, the Wash-in Rain Shield Re-Proofer (300ml) is an advanced Durable Water Repellent treatment that creates a new, tough barrier of weatherproof protection. Water will simply bead on the surface and roll off. And Rain Shield won't compromise the fabric's breathability either. Not only that, but it will also protect against mud and stains. It achieves all this protection while being safe for the environment, thanks to a water-based and PPCF-free formula. Protection is fully restored within 24 hours of treatment. Shake to Activate Use 100ml per large item (20 x 5ml caps) on a 30°C/86°F washing cycle for best results to help restore waterproofing performance on technical garments. How to: 1. Muc-Off recommends cleaning your technical apparel with their Technical Wash before treating with Wash-In Rain Sheild Re-Proofer for the best results. 2. Shake the bottle well to activate the formula. 3. For best results we recommend reproofing garments separately. 4. Use 20 x 5ml caps per large item, or two smaller items. Use 5 x capfuls if hand washing. 5. Pour the product directly into the detergent drawer of your washing machine 6. Wash on a full cycle at 30°C/86°F or according to the care label instructions. 7. Air-dry by hanging up and leave to dry overnight before wearing the garment in wet conditions again. Or tumble dry if the care label inside your garment permits. Top Tip For an even more durable treatment, you can apply our Rain Shield Re-Proofer spray as a second treatment after using the wash-in formula. This will build a secondary water-repellent coating on garments used in very harsh/wet conditions. N.B The efficiency of the DWR applied to the surface of the technical apparel will gradually wear off over time with normal wear and washing, so it's recommended to refresh the coating every 3 months depending on wear and washing frequency. All waterproof clothing needs to be cared for to keep it performing at its best. Using ordinary household detergent will ultimately break down the DWR and impair the water repellence, due to the heavy surfactants in these products. If you notice that water is no longer beading on the surface of your garment and soaking into the fabric, then it is time to refresh with Re-proofer.
Features:Great value bar tape with sticky silicon gripper backing,Extra thick EVA tape for increased comfort,Extremely durable with easy to re-use sticky silicon gripper backing that does not leave any residue on the bar,Includes bar end plugs and adhesive PRO fixing tape.