The Vent is a simple and smooth looking sprocket, incorporating a unique three spoke design. Each of the spokes are internally machined to reduce weight without compromising strength. ###section### Product Specs TYPE: Bolt On MATERIAL: Alloy WEIGHT: TBC
Replacement aluminium guard for Eclat Viper sprockets.
The Allpine Light Eco cleaner is a deep-cleaning, highly efficient and biodegradable bike cleaner that is formulated using pine oil - this superb bike cleaner is ideal for quick cleaning without the need to rinse using water afterwards. With its intense pine scent, Allpine Light is a biodegradable cleaner that will leave your bike clean and shiny. Its formula is very effective against dirt and does not require rinsing, making it ideal also for electric bikes (E-Bikes). Biodegradable Pine Oil Eco Bike Cleaner Allpine Light is harmless to the environment but very effective against dirt. After using it, you can get on a clean bicycle with a nice pine scent - a good way to start an epic ride. It is also ideal for E-Bikes since there is no need to rinse it away after cleaning. There are times when you are in a hurry and a quick cleaning is sufficient, or – especially for e-bikes - you want to limit the use of water close to electrical contacts. For these situations of moderate dirt, Allpine Light and a rag are enough to clean the bike, without the need to rinse with water. Use Without Rinsing: - Spray Allpine Light on a clean rag and wipe the entire frame - After cleaning, the surface will be shiny, with an anti-water and antistatic effect - As it does not contain silicone, it avoids that annoying sticky effect which is a real dust magnet. The surface thus treated also facilitates the flow of water - Note: Allpine Light does not remove the lubricant from the chain, so it is not necessary to relubricate it after such a cleaning - When the going gets tough, it doesn't hold back - If the bike is very dirty and / or muddy, you have to perform a serious cleaning Use With Rinsing: - Generously spray Allpine Light all over the bike - Wait a few minutes to let the product act - Rinse with plenty of water. A sponge or brush is recommended for an optimal result - Dry with a clean cloth. If needed, use more Allpine Light - without rinsing - to remove any streaks or traces of dirt - Lubricate the bicycle (chain, suspension, moving parts) after such a thorough cleaning
With a torque range from 10 up to 60 Nm, this tool is standard equipment of the best cycling workshops. Design is inspired by smaller Giustaforza, constructive quality and reliability are state-of-the art. The wrench is supplied with a 3/4-1/2 adapter includedCapacity from 10 up to 60 Nm:This torque range is ideal for the elements of the bicycle with the highest torque specifications (bottom bracket, cassettes). In use, always refer to the torque values specified on technical documents or printed on the parts themselves.Easy to use:Unlock the wrench-end knob by gently pulling it, and set the desired torque value rotating the knob and reading the torque on the scale. After setting the torque value, push the knob back in place, to prevent unwanted changes to the set value while using the wrench. Depending on the rotation direction of the part you want to tighten, push the square section bar through the wrench head to one side or the other. When using the tool, a loud ‘CLICK’ and a 3° free-movement tells when the torque has been reached. Always take the wrench to minimum torque value after use.A state-of-the art tool, built to last:Functional, linear in design and precise in any detail: shouldn’t be a surprise to know that Giustaforza II 10-60 has been conceived and produced in Italy. The tool has laser-etched inscriptions and is built to last. The mechanical, click-type functioning make the wrench extremely shock tolerant and the absence of batteries or electronics, increase its reliability. Each sample is checked and numbered as a single masterpiece.
Made for Effetto Mariposa's 10th anniversary and targeted at professional usersGiustaforza II 2-16 Pro Anniversary has a gun-metal grey hard anodization and a reversible ratcheting head. This version is completed with cycling-specific bits and comes into a practical workshop case.Key Features:specifically designed for bicycle applications,very easy to use,extreme constructive quality for maximum reliability and durability,small and highly reliable ratcheting head,no batteries to replace,no plastic parts.Capacity from 2 up to 16 Nm:This is the best torque range for precision bicycle applications and ‘sensitive’ components. In use, always refer to the torque values specified on technical documents or printed on the parts themselves.Easy to use:Set the desired torque rotating the wrench end knob, reading the torque value on the scale (scale resolution is 0,5 Nm, integers on one side, 0,5 on the other);insert the appropriate bit (depending on the bolt you need to tighten);using the tool, a loud ‘CLICK’ and a 3° free-movement tells when the torque has been reached;always take the wrench to minimum torque value after use.Ratcheting head:For an higher productivity in professional applications, Giustaforza Pro Anniversary gets a very small and highly reliable ratcheting head. 1/4? square (1/4? square/hex adapter provided, to be able to use standard bits).Lightweight:The light aluminum body keeps the weight down to a record-breaking sub-200g value, less than half the weight of other torque wrenches in this range of torque. This is paramount to get the right feedback at low torque values, without mistaking the effort to hold the tool with the applied torque.A state-of-the art tool, built to last:Functional, linear in design and precise in any detail: shouldn’t be a surprise to know that Giustaforza II 2-16 Pro Anniversary has been designed and produced in Italy. The wrench body is hard-anodized with laser-etched inscriptions, and it’s built to last. The mechanical, click-type functioning makes the wrench extremely shock tolerant and the absence of batteries or electronics furtherly increase its reliability. Each sample is checked and numbered as a single masterpiece.Bits:Bits include a 100 mm-long extension, three 100 mm-long bits (hex 4, hex 5 e T25) plus several other Torx and hex bits in standard lenght (25 mm). That covers all the needs of newest Shimano, Sram and Campagnolo high-end groupsets, plus those of reversed-bolt stems. All bits are manufactured from S2 special steel, with very high (62 Hrc) surface hardness, to ensure maximum durability.Detail of bits:10x25mm (HEX2, HEX2.5, HEX3, HEX6, T10, T15, T20, T30, -3/16, +PH1)3x100mm (HEX4, HEX5, T25)1x100mm (extension)Made in Italy.
Targeted at professional users, Giustaforza II 2-16 Pro is red anodized and has a reversible ratcheting head. The Deluxe version is completed with cycling-specific bits and comes into a practical wrap package.Capacity from 2 up to 16 Nm: This is the best torque range for precision bicycle applications and ‘sensitive’ components. In use, always refer to the torque values specified on technical documents or printed on the parts themselves.Easy to use:Set the desired torque rotating the wrench end knob, reading the torque value on the scale (scale resolution is 0,5 Nm, integers on one side, 0,5 on the other) insert the appropriate bit (depending on the bolt you need to tighten). When using the tool, a loud ‘CLICK’ and a 3° free-movement tells when the torque has been reached. Always take the wrench to minimum torque value after use.Ratcheting head:For an higher productivity in professional applications, Giustaforza II Pro gets a very small yet highly reliable ratcheting head. 1/4 square (1/4 square/hex adapter provided, to be able to use standard bits).Lightweight:The light aluminium body keeps the weight down to a record-breaking sub-200g value, less than half the weight of other torque wrenches in this range of torque. This is paramount to get the right feedback at low torque values, without mistaking the effort to hold the tool with the applied torque.A state-of-the art tool, built to last:Functional, linear in design and precise in any detail: shouldn’t be a surprise to know that Giustaforza II 2-16 Pro has been designed and produced in Italy. The tool is hard-anodized with laser-etched inscriptions and is built to last. The mechanical, click-type functioning make the wrench extremely shock tolerant and the absence of batteries or electronics further increase its reliability. Each sample is checked and numbered as a single masterpiece.Controlled torque:The Deluxe version is equipped with a bicycle-specific bit set:bits include a 100 mm-long extension, three 100 mm-long bits (hex 4, hex 5 e T25) plus several other Torx and hex bits in standard length (25 mm). That covers all the needs of newest Shimano, Sram and Campagnolo high-end groupsets, plus those of reversed-bolt stems.All bits are manufactured from S2 special steel, with very high (62 Hrc) surface hardness, to ensure maximum durability.Detail of bits:10x25mm (HEX2, HEX2.5, HEX3, HEX6, T10, T15, T20, T30, -3/16, +PH1)3x100mm (HEX4, HEX5, T25)1x100mm (extension)
The Effetto Giustaforza II Pro Anniversary Torque Wrench is made for Effetto Mariposa's 10th anniversary and targeted at professional users. The Giustaforza II 2-16 Pro Anniversary bicycle torque wrench has a gun-metal grey hard anodization and a reversible ratcheting head. This version is completed with cycling-specific bits and comes into a practical workshop case.Specifically designed for bicycle applicationsVery easy to useExtreme constructive quality for maximum reliability and durabilitySmall and highly reliable ratcheting headNo batteries to replaceNo plastic partsDetail of bits:10x25mm (HEX2, HEX2.5, HEX3, HEX6, T10, T15, T20, T30, -3/16, +PH1)3x100mm (HEX4, HEX5, T25)1x100mm (extension)Capacity from 2 up to 16 Nm: This is the best torque range for precision bicycle applications and sensitive components. In use, always refer to the torque values specified on technical documents or printed on the parts themselves.Ratcheting head: For a higher productivity in professional applications, Giustaforza Pro Anniversary gets a very small and highly reliable ratcheting head. 1/4 square (1/4 square/hex adapter provided, to be able to use standard bits).Lightweight: The light aluminium body keeps the weight down to a record-breaking sub-200g value, less than half the weight of other torque wrenches in this range of torque. This is paramount to get the right feedback at low torque values, without mistaking the effort to hold the tool with the applied torque.A state-of-the art tool, built to last: Functional, linear in design and precise in any detail: shouldn t be a surprise to know that Giustaforza II 2-16 Pro Anniversary has been designed and produced in Italy. The wrench body is hard-anodized with laser-etched inscriptions, and it s built to last. The mechanical, click-type functioning makes the wrench extremely shock tolerant and the absence of batteries or electronics furtherly increase its reliability. Each sample is checked and numbered as a single masterpiece.Bits: Bits include a 100 mm-long extension, three 100 mm-long bits (hex 4, hex 5 e T25) plus several other Torx and hex bits in standard length (25 mm). That covers all the needs of newest Shimano, SRAM and Campagnolo high-end groupsets, plus those of reversed-bolt stems. All bits are manufactured from S2 special steel, with very high (62 Hrc) surface hardness, to ensure maximum durability.
Effetto Mariposa Giustaforza II Pro Anniversary WrenchThe Giustaforza II Pro Anniversary Wrench from Effetto is a high-quality workshop wrench that ensures precise tooling thanks to its precise torque ratchet. Ideal for fitting and adjusting bike components, this wrench has torque capacity from 2 - 16 Nm and comes supplied with bits and a workshop-quality case.The Giustaforza II 2-16 Pro Anniversary bicycle torque wrench has a gun-metal grey hard anodization and a reversible ratcheting head. This version is completed with cycling-specific bits and comes into a practical workshop case. Features: High-quality professional ratchet Hard anodization and a reversible head Cycling-specific bits Practical workshop case Torque values from 2 - 16 NmBuy Effetto Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Giustaforza II 2-16 Pro Anniversary bicycle torque wrench has a gun-metal grey hard anodization and a reversible ratcheting head. This version is completed with cycling-specific bits and comes into a practical workshop case.
Targeted at professional users, the Effetto Giustaforza II 2Nm-16Nm Pro is red anodized and has a reversible ratcheting head. The Deluxe Pro version is completed with cycling-specific bits and comes into a practical wrap package.This Deluxe Pro version is equipped with a bicycle-specific bit set:Bits include a 100 mm-long extension, three 100 mm-long bits (hex 4, hex 5 e T25) plus several other Torx and hex bits in standard length (25 mm). That covers all the needs of newest Shimano, Sram and Campagnolo high-end groupsets, plus those of reversed-bolt stems.All bits are manufactured from S2 special steel, with very high (62 Hrc) surface hardness, to ensure maximum durability.10x25mm (HEX2, HEX2.5, HEX3, HEX6, T10, T15, T20, T30, -3/16, +PH1)3x100mm (HEX4, HEX5, T25)1x100mm (extension)Capacity from 2 up to 16 Nm: This is the best torque range for precision bicycle applications and sensitive components. In use, always refer to the torque values specified on technical documents or printed on the parts themselves.Easy to use: Set the desired torque rotating the wrench end knob, reading the torque value on the scale (scale resolution is 0,5 Nm, integers on one side, 0,5 on the other) insert the appropriate bit (depending on the bolt you need to tighten). When using the tool, a loud CLICK and a 3° free movement tells when the torque has been reached. Always take the wrench to minimum torque value after use.Ratcheting head: For a higher productivity in professional applications, Giustaforza II Pro gets a very small yet highly reliable ratcheting head. 1/4 square (1/4 square/hex adapter provided, to be able to use standard bits).Lightweight: The light aluminium body keeps the weight down to a record-breaking sub-200g value, less than half the weight of other torque wrenches in this range of torque. This is paramount to get the right feedback at low torque values, without mistaking the effort to hold the tool with the applied torque.A state-of-the art tool, built to last: Functional, linear in design and precise in any detail: shouldn t be a surprise to know that Giustaforza II 2-16 Pro has been designed and produced in Italy. The tool is hard-anodized with laser-etched inscriptions and is built to last. The mechanical, click-type functioning make the wrench extremely shock tolerant and the absence of batteries or electronics further increase its reliability. Each sample is checked and numbered as a single masterpiece.
With a torque range from 10 up to 60 Nm, this Effetto Giustaforza II 10Nm-60Nm Pro tool is standard equipment of the best cycling workshops. Design is inspired by smaller Giustaforza, constructive quality and reliability are state-of-the art. This bike wrench is supplied with a 3/8-1/2 adapter included (as suggested by Greg Kopecky/Slowtwitch.com in his review).10 up to 60 Nm RangeQuality and reliabilityState-of-the art Torque wrench3/8-1/2 adapter includedCapacity from 10 up to 60 Nm: This torque range is ideal for the elements of the bicycle with the highest torque specifications (bottom bracket, cassettes). In use, always refer to the torque values specified on technical documents or printed on the parts themselves.Easy to use: Unlock the wrench-end knob by gently pulling it and set the desired torque value rotating the knob and reading the torque on the scale. After setting the torque value, push the knob back in place, to prevent unwanted changes to the set value while using the wrench. Depending on the rotation direction of the part you want to tighten, push the square section bar through the wrench head to one side or the other. When using the tool, a loud CLICK and a 3° free movement tells when the torque has been reached. Always take the wrench to minimum torque value after use.A state-of-the art tool, built to last: Functional, linear in design and precise in any detail: shouldn t be a surprise to know that Giustaforza II 10-60 has been conceived and produced in Italy. The tool has laser-etched inscriptions and is built to last. The mechanical, click-type functioning make the wrench extremely shock tolerant and the absence of batteries or electronics, increase its reliability. Each sample is checked and numbered as a single masterpiece.Calibration service: The +-4% tolerance is guaranteed for 5000 cycles (5000 clicks ), then the wrench should be re-calibrated. Calibration is a service Effetto offer in their laboratories at the cost of 35 plus shipping expenses. After every calibration, the tolerance of +-4% over nominal value will extend for 5000 cycles. After calibration, the wrench will be returned to the customer with a calibration certificate.
Fly Pro Team 500ml BottleFeel like you're flying and pay tribute to your favourite team with Elite's Fly Pro Team 500ml Bottle.The Fly Pro Team 500ml Bottle from Elite has an extremely lightweight construction that is squeezable and comes with an ergonomically designed cap which makes drinking from the bottle quick and easy. The bottle also comes with a large opening making it easier to refill and to clean.Features:Wide opening and ergonomically designed capExtremely lightweight constructionSoft and durable plastic designOdourless materialBPA free500ml capacityBuy Elite water bottles from Chain Reaction Cycles, the World's Largest Online Bike Store.