The Micro Pro is the classic Dynaplug tool; super compact, weatherproof and beautifully machined. There when you need it, hassle free when you don't. No need to remove the tyre, no messy glues or solvents, just plug and ride!If a single plug is not enough to seal a hole, just fold the tail flat on the tyre; hold it with your finger and stick another one in there! Add as many plugs as needed, folding each tail against the tyre as you insert plugsA plug tail can be snipped off later if it bothers you; trim to about 4mm long depending on the locationMicro Pro capsule is only a tiny 57 mm long and weighs in at just 45 grams, making it easy to carry in jersey pockets, seat packs or indeed pretty much anywhereKit includes the tool, 2 x stainless steel insertion tubes, 5 x soft nose standard plugs, 1 x micro knife, 1 x air stopper and a pipe cleaner to help prep the tube for reloadingMade with pride in the USA with patented technology and warrantied for life under normal usageThe Micro Pro is a perfectly machined, waterproof 6061 aluminium capsule that contains everything you need for a big day out, including multiple pre-loaded Dynaplug insertion tubes, an air stopper tool for helping to prep the hole for insertion and a micro knife for cutting the plug tail. Despite all this, the Micro Pro capsule is only a tiny 57 mm long and weighs in at just 45 grams, making it easy to carry in jersey pockets, seat packs or indeed pretty much anywhere.Dynaplug is the fastest, easiest and all-round best way to repair a tubeless tyre mid-ride. When needed, just remove whatever caused the puncture, firmly push the novel insertion tube straight into the hole and extract the tool depositing the repair plug in the tyre, done! The sealant-friendly repair plug is a unique viscoelastic impregnated rubber that bonds instantly and permanently with your tyre, and the nonabrasive brass tip will not scratch your rim or puncture your rim tape.
The Micro Pro is the classic Dynaplug tool; super compact, weatherproof and beautifully machined. There when you need it, hassle free when you don't. No need to remove the tyre, no messy glues or solvents, just plug and ride!If a single plug is not enough to seal a hole, just fold the tail flat on the tyre; hold it with your finger and stick another one in there! Add as many plugs as needed, folding each tail against the tyre as you insert plugsA plug tail can be snipped off later if it bothers you; trim to about 4mm long depending on the locationMicro Pro capsule is only a tiny 57 mm long and weighs in at just 45 grams, making it easy to carry in jersey pockets, seat packs or indeed pretty much anywhereKit includes the tool, 2 x stainless steel insertion tubes, 5 x soft nose standard plugs, 1 x micro knife, 1 x air stopper and a pipe cleaner to help prep the tube for reloadingMade with pride in the USA with patented technology and warrantied for life under normal usageThe Micro Pro is a perfectly machined, waterproof 6061 aluminium capsule that contains everything you need for a big day out, including multiple pre-loaded Dynaplug insertion tubes, an air stopper tool for helping to prep the hole for insertion and a micro knife for cutting the plug tail. Despite all this, the Micro Pro capsule is only a tiny 57 mm long and weighs in at just 45 grams, making it easy to carry in jersey pockets, seat packs or indeed pretty much anywhere.Dynaplug is the fastest, easiest and all-round best way to repair a tubeless tyre mid-ride. When needed, just remove whatever caused the puncture, firmly push the novel insertion tube straight into the hole and extract the tool depositing the repair plug in the tyre, done! The sealant-friendly repair plug is a unique viscoelastic impregnated rubber that bonds instantly and permanently with your tyre, and the nonabrasive brass tip will not scratch your rim or puncture your rim tape.
The Micro Pro is the classic Dynaplug tool; super compact, weatherproof and beautifully machined. There when you need it, hassle free when you don't. No need to remove the tyre, no messy glues or solvents, just plug and ride!If a single plug is not enough to seal a hole, just fold the tail flat on the tyre; hold it with your finger and stick another one in there! Add as many plugs as needed, folding each tail against the tyre as you insert plugsA plug tail can be snipped off later if it bothers you; trim to about 4mm long depending on the locationMicro Pro capsule is only a tiny 57 mm long and weighs in at just 45 grams, making it easy to carry in jersey pockets, seat packs or indeed pretty much anywhereKit includes the tool, 2 x stainless steel insertion tubes, 5 x soft nose standard plugs, 1 x micro knife, 1 x air stopper and a pipe cleaner to help prep the tube for reloadingMade with pride in the USA with patented technology and warrantied for life under normal usageThe Micro Pro is a perfectly machined, waterproof 6061 aluminium capsule that contains everything you need for a big day out, including multiple pre-loaded Dynaplug insertion tubes, an air stopper tool for helping to prep the hole for insertion and a micro knife for cutting the plug tail. Despite all this, the Micro Pro capsule is only a tiny 57 mm long and weighs in at just 45 grams, making it easy to carry in jersey pockets, seat packs or indeed pretty much anywhere.Dynaplug is the fastest, easiest and all-round best way to repair a tubeless tyre mid-ride. When needed, just remove whatever caused the puncture, firmly push the novel insertion tube straight into the hole and extract the tool depositing the repair plug in the tyre, done! The sealant-friendly repair plug is a unique viscoelastic impregnated rubber that bonds instantly and permanently with your tyre, and the nonabrasive brass tip will not scratch your rim or puncture your rim tape.
The Micro Pro is the classic Dynaplug tool; super compact, weatherproof and beautifully machined. There when you need it, hassle free when you don't. No need to remove the tyre, no messy glues or solvents, just plug and ride!If a single plug is not enough to seal a hole, just fold the tail flat on the tyre; hold it with your finger and stick another one in there! Add as many plugs as needed, folding each tail against the tyre as you insert plugsA plug tail can be snipped off later if it bothers you; trim to about 4mm long depending on the locationMicro Pro capsule is only a tiny 57 mm long and weighs in at just 45 grams, making it easy to carry in jersey pockets, seat packs or indeed pretty much anywhereKit includes the tool, 2 x stainless steel insertion tubes, 5 x soft nose standard plugs, 1 x micro knife, 1 x air stopper and a pipe cleaner to help prep the tube for reloadingMade with pride in the USA with patented technology and warrantied for life under normal usageThe Micro Pro is a perfectly machined, waterproof 6061 aluminium capsule that contains everything you need for a big day out, including multiple pre-loaded Dynaplug insertion tubes, an air stopper tool for helping to prep the hole for insertion and a micro knife for cutting the plug tail. Despite all this, the Micro Pro capsule is only a tiny 57 mm long and weighs in at just 45 grams, making it easy to carry in jersey pockets, seat packs or indeed pretty much anywhere.Dynaplug is the fastest, easiest and all-round best way to repair a tubeless tyre mid-ride. When needed, just remove whatever caused the puncture, firmly push the novel insertion tube straight into the hole and extract the tool depositing the repair plug in the tyre, done! The sealant-friendly repair plug is a unique viscoelastic impregnated rubber that bonds instantly and permanently with your tyre, and the nonabrasive brass tip will not scratch your rim or puncture your rim tape.
The Micro Pro is the classic Dynaplug tool; super compact, weatherproof and beautifully machined. There when you need it, hassle free when you don't. No need to remove the tyre, no messy glues or solvents, just plug and ride!If a single plug is not enough to seal a hole, just fold the tail flat on the tyre; hold it with your finger and stick another one in there! Add as many plugs as needed, folding each tail against the tyre as you insert plugsA plug tail can be snipped off later if it bothers you; trim to about 4mm long depending on the locationMicro Pro capsule is only a tiny 57 mm long and weighs in at just 45 grams, making it easy to carry in jersey pockets, seat packs or indeed pretty much anywhereKit includes the tool, 2 x stainless steel insertion tubes, 5 x soft nose standard plugs, 1 x micro knife, 1 x air stopper and a pipe cleaner to help prep the tube for reloadingMade with pride in the USA with patented technology and warrantied for life under normal usageThe Micro Pro is a perfectly machined, waterproof 6061 aluminium capsule that contains everything you need for a big day out, including multiple pre-loaded Dynaplug insertion tubes, an air stopper tool for helping to prep the hole for insertion and a micro knife for cutting the plug tail. Despite all this, the Micro Pro capsule is only a tiny 57 mm long and weighs in at just 45 grams, making it easy to carry in jersey pockets, seat packs or indeed pretty much anywhere.Dynaplug is the fastest, easiest and all-round best way to repair a tubeless tyre mid-ride. When needed, just remove whatever caused the puncture, firmly push the novel insertion tube straight into the hole and extract the tool depositing the repair plug in the tyre, done! The sealant-friendly repair plug is a unique viscoelastic impregnated rubber that bonds instantly and permanently with your tyre, and the nonabrasive brass tip will not scratch your rim or puncture your rim tape.
The Abyss Guard Sprocket use a unique 5 spoke design with strengthened arm and subtle cutouts to reduce the weight. CNC machined from superior grade 7075-T6 alloy for increased life and is available in 25t and 28t. The Abyss is specifically designed to be compatible with every crank on the market and is supplied with sunken adaptors so it can be run on 24, 22 and 19mm spindles to maintain a perfect chain alignment on all setups. ###section### Product Specs TYPE: Guard MATERIAL: Alloy WEIGHT: 25t: 126g (4.44oz/ 0.28lbs). 28t: 154g (5.43oz/ 0.34lbs)
The Abyss sprocket use an intricate design based the high end wheels used on super cars. CNC machined from 6061-T6 alloy and is available in 25t, 26t and 28t. The RS is supplied with adaptors so it can be run on 24, 22 and 19mm spindles. The offset teeth on the sprocket help to maintain a perfect chain alignment on all set ups. ###section### Product Specs TYPE: Bolt On MATERIAL: Alloy WEIGHT: 80g
The Alex Kennedy signature AK Guard received a lot of attention when Eclat debuted it at Interbike back in September. A concept that was spawned from his signature pedal; Eclat wanted to take the robust nylon construction of the AK pedal and apply it to a full guard sprocket. The end result is a 8mm thick full CNC 6061-T6 Alloy sprocket with a fully replaceable 10mm thick Nylon-Fibreglass guard that is then bolted securely on to the sprocket via x4 small bolts. The high-impact, low-friction material of the guard allows you to grind and slide on the sprocket in ways that a standard alloy guard wouldn’t let you – this also opens up the possibility of a whole new world of grind combinations. ###section### Product Specs TYPE: Bolt On MATERIAL: Alloy with Nylon Guard WEIGHT: 150g / 5.29oz
The Elevate Guard Sprocket is Eclats new team designed guard sprocket, which uses the same Viper nylon fiberglass bash guard and patented interface that made theAK guard a success. One of the major design elements that has made this guard such a trustworthy and robust product, is the way that the Nylon guard is attached to the sprocket. Instead of sitting on the surface of the alloy sprocket, the Nylon guard is sunken into the structure of the sprocket and supported all the way around so that the bolt holes on the guard do not take all the impact. The high-impact, low-friction material of the guard allows you to grind and slide on the sprocket in ways that a standard alloy guard wouldn’t let you – this also opens up the possibility of a whole new world of grind combinations. ###section### Product Specs TYPE: Bolt On MATERIAL: 6061-T6 alloy, full cnc sprocket and nylon/fibreglass replaceable guard WEIGHT: 25t: 150g (5.29oz)
The Onyx Sprocket is a cold-forged sprocket is new to the Eclat line-up. Thanks to the cold forging process, we were able to produce an insanely strong and durable sprocket which is not only much more affordable than a traditional CNC machined sprocket ###section### Product Specs TYPE: Bolt On MATERIAL: Alloy WEIGHT: TBC
The RS sprocket use an intricate designed based the high end wheels used on super cars. CNC machined from 6061-T6 alloy and is available in 25t, 26t and 28t. The RS is supplied with adaptors so it can be run on 24, 22 and 19mm spindles. The offset teeth on the sprocket help to maintain a perfect chain alignment on all set ups. ###section### Product Specs TYPE: Bolt On MATERIAL: Alloy WEIGHT: 90g / 3.2oz
Eclat have taken the tri-spoke Vent sprocket and beefed it up with a 7mm thick guard making it ideal for all who like a good crank arm slide or sprocket stall. Each of the spokes are internally machined to reduce weight without compromising strength. The Vent Guard Sprocket will fit the majority of cranks on the market and uses wider spacing meaning you can run it with wide and half link chains with no issues. ###section### Product Specs TYPE: Bolt On MATERIAL: Alloy WEIGHT: TBC