Perfect for three-season use courtesy of MicroThermo Highloft insulation, the Robens HighCore 80 Sleeping Mat is a perfect balance of weight and comfort. Boasting an 8cm-deep envelope profile with 3D sides for stability, alongside an embossed PFC-free TPU-coated polyester fabric, it provides optimum performance and longevity. The HighCore 80 airbed also uses an unobtrusive Peak Valve for ease of inflation and deflation.
The Robens Serac 300 Sleeping Bag boasts a standard mummy profile and an RDS-certified 300g down filling for the best warmth to weight comfort ratio on most general outdoor adventures. The down filling is also highly compressible so can easily be packed away in its compression stuff stack when not in use, and is highly lightweight so won't weigh you down as you move. A neck baffle additionally minimises heat loss, while a shark fin foot box with extra insulation will provide optimum warmth to where it is needed, alongside allowing your feet to rest comfortably in a natural position. To finish, the durable riptop outer fabric is highly durable and tear resistant, and the lining offers a high moisture transport.
The Robens Serac 600 Sleeping Bag boasts a standard mummy profile and an RDS-certified 600g down filling for the best warmth to weight comfort ratio on most general outdoor adventures. The down filling is also highly compressible so can easily be packed away in its compression stuff stack when not in use, and is highly lightweight so won't weigh you down as you move. A neck baffle additionally minimises heat loss, while a shark fin foot box with extra insulation will provide optimum warmth to where it is needed, alongside allowing your feet to rest comfortably in a natural position. To finish, the durable riptop outer fabric is highly durable and tear resistant, and the lining offers a high moisture transport.
The Robens Spire I Sleeping Bag has been constructed with a body contour profile for an optimum warmth to weight ratio. Designed for two season use, it features a 3D hood profile and redefined neck baffle position to keep warmth in and draughts out, while a shark fin foot box offers extra insulation to where it is needed most. Additionally, a brushed lining lends high moisture transport for comfort and an inside pocket lets you keep valuables close at hand.
The Robens Spire II Sleeping Bag has been constructed with a body contour profile alongside OneThermo insulation for an optimum warmth to weight ratio. Designed for three season use, it features a 3D hood profile and redefined neck baffle position to keep warmth in and draughts out, while a shark fin foot box offers extra insulation to where it is needed most. Additionally, a brushed lining lends high moisture transport for comfort and an inside pocket lets you keep valuables close at hand.
The Robens Spire III Sleeping Bag has been constructed with a body contour profile for an optimum warmth to weight ratio. Designed for three season use, it features a 3D hood profile and redefined neck baffle position to keep warmth in and draughts out, while a shark fin foot box offers extra insulation to where it is needed most. Additionally, a brushed lining lends high moisture transport for comfort and an inside pocket lets you keep valuables close at hand.
Roben's Zigzag Slumber sleeping pad is made from premium quality, non-absorbent EVA, closed cell foam which is super comfortable and super durable. Great for use on all your travels and adventures the Zigzag mat packs up incredibly compactly for easy transportation due to the pads unique half dome dot design, which folds into itself. Pack straps are also included. Specifications Fabric: EVA closed cell foam Size: 180cm (L) x 48cm (W) x 2cm (H) R-Value: 2.2 (2°C) Colour: Green Pack Size: 48cm x 15cm x 9cm Weight: 320g
RockShox Bleed Kit (XLoc/Reverb/Totem)This bleed kit is specifically designed for use with RockShox suspension forks with XLoc remote, Totem suspension forks and housing as well as the remote of RockShox Reverb Vario seatposts. It includes two RockShox syringes, two RockShox bleed fittings and one RockShox Torx T10 / T25 tool, so you'll have everything you need to bleed your setup quickly and easily.Use only RockShox parts with RockShox components. Installation of parts and accessories not originally intended could result in less than optimal performance and/or injury.Features: Use: Mountain Bike (MTB) Type: Bleed Kit XLoc, Reverb and Totem Compatibility: RockShox XLoc/Reverb/Totem Included: x2 RockShox syringes, x2 RockShox bleed fittings and x1 RockShox Torx T10 / T25 toolManufacturer's Part Numbers: 11.4315.011.030 Pink Inc. Syringes/ToolBuy RockShox Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
RockShox Charger Damper Bleed KitThis Charger Damper bleed kit is specifically designed for use with RockShox Charger/RaceDay dampers. It includes one RockShox syringe, two RockShox High Performance Suspension Fluid (120ml) bottles and one RockShox Charger1/Standard fitting.Use only RockShox parts with RockShox components. Installation of parts and accessories not originally intended could result in less than optimal performance and/or injury.Compatibility:This bleed kit is compatible with the following suspension fork part numbers:FS-BXR-RC-B1, FS-BXR-RC-B2, FS-BXR-RC-C1, FS-BXR-SEL-C2, FS-BXR-TEAM-A1, FS-BXR-TEAM-A2, FS-BXR-ULT-C2, FS-BXR-WC-B1, FS-BXR-WC-B2, FS-BXR-WC-C1, FS-LYRK-SEL-C3, FS-LYRK-ULT-C3, FS-PIKE-DJ-A2, FS-PIKE-DJ-A3, FS-PIKE-DJ-A4, FS-PIKE-RCT3-A2, FS-PIKE-RCT3-B1, FS-PIKE-RCT3-B2, FS-PIKE-SEL-B3, FS-PIKE-SEL-B4, FS-PIKE-ULT-B3, FS-PIKE-ULT-B4, FS-RVL-RC-A1, FS-RVL-RC-A2, FS-RVL-RC-A3, FS-RVL-RCT3-A3, FS-RVL-RCT3-A4, FS-RVL-RCT3-A5, FS-SID-RCT3-A4, FS-SID-RL-A4, FS-SID-RL-B1, FS-SID-RL-B2, FS-SID-RL-B3, FS-SID-RLC-A1, FS-SID-RLC-A2, FS-SID-RLC-B1, FS-SID-SEL-B4, FS-SID-SEL-C1, FS-SID-ULT-B4, FS-SID-ULT-C1, FS-SID-ULTC-B4, FS-SID-WC-B1, FS-SID-WC-B2, FS-SID-WC-B3, FS-SID-XX-A4, FS-SID-XX-B1, FS-SID-XXWC-A4, FS-SIDS-SEL-C1, FS-SIDS-ULT-C1, FS-YARI-RC-A1, FS-YARI-RC-B1, FS-YARI-RC-B2, FS-YARI-RC-B3, FS-ZEB-R-A1, FS-ZEB-SEL-A1, FS-ZEB-ULT-A1Features: Type: RockShox Charger Damper Bleed Kit Use: Mountain Bike (MTB) Compatibility: RockShox Pike/BoXXer and more Included: 1x RockShox syringe, 2x RockShox High Performance Suspension Fluid (120ml), x1 RockShox Charger1/Standard fitting for Charger/RaceDay dampers Genuine RockShox spare partsManufacturer's Part Number: 00.4318.007.000 Pink Pike/BoXXerBuy RockShox Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
RockShox Reverb Hydraulic FluidOptimised for use with Reverb and Monarch XX rear shock remote levers, this excellent liquid works hard to keep your system in check. Perfect for keeping your Rockshox rear suspension setup running smoothly and efficiently.Features: Size: 120ml bottle Genuine RockShox hydraulic fluidBuy RockShox Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Rotor 2Inpower Crank Arm Bumper SetThese superb bumpers are specifically designed for use with your Rotor 2INPower MTB cranks. Additionally, they provide excellent protection from scratches and chips caused by rocks, roots and trail obstacles. Finally, these come in a variety of selectable colour options, so you can compliment and customise your cranks with eye-catching bumpers.Features: Material: Rubber Compatibility: Rotor 2INPower MTB cranks Weight: 16.9gBuy Rotor Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Rotor BB1 BSA Ceramic MTB Bottom BracketRotor set out with the goal of creating a bottom bracket unlike anything currently available on the market with a flashy and aesthetically appealing look.The BB1 is incredibly light and is sure not to go unnoticed, and the smooth unobtrusive lines marry perfectly with any type compatible crankset, be it made of carbon or aluminium.The BB1 is available in black colour with steel bearings, Enduro Grade5 Ceramic and Enduro Grade3 Ceramic. The steel option offers a light and elegant bottom bracket at a very competitive price while the ceramic bearing options are ideal for those looking to shed every possible gram while at the same time acquiring an incredibly smooth bottom bracket. Both versions are available for road (BSA only) as well as MTB use. The ceramic versions come in at an incredible 91g for the road model, and 95g for the MTB, while the steels comes in at 97g for road and 101g for MTB; still quite impressive.Features: BB1 BSA FOR BSA FRAMESteel: 96g, Ceramic 91g.Black anodized and lasered design.Lathe and CNC T6 heat treated 7075 Aluminium.Labyrinth seals prevent bearing contamination.For all ROTOR and Shimano compatible 24mm cranks.Buy Rotor Components from Chain Reaction Cycles, the World's Largest Online Bike Store.