The Robens Spire III Sleeping Bag has been constructed with a body contour profile for an optimum warmth to weight ratio. Designed for three season use, it features a 3D hood profile and redefined neck baffle position to keep warmth in and draughts out, while a shark fin foot box offers extra insulation to where it is needed most. Additionally, a brushed lining lends high moisture transport for comfort and an inside pocket lets you keep valuables close at hand.
The Robens Serac 600 Sleeping Bag boasts a standard mummy profile and an RDS-certified 600g down filling for the best warmth to weight comfort ratio on most general outdoor adventures. The down filling is also highly compressible so can easily be packed away in its compression stuff stack when not in use, and is highly lightweight so won't weigh you down as you move. A neck baffle additionally minimises heat loss, while a shark fin foot box with extra insulation will provide optimum warmth to where it is needed, alongside allowing your feet to rest comfortably in a natural position. To finish, the durable riptop outer fabric is highly durable and tear resistant, and the lining offers a high moisture transport.
The Robens Couloir 750 Sleeping Bag has been designed for versatile three to four season use. This lightweight Couloir down sleeping bag has a technical Mummy profile with a Toray Nylon Taffeta shell to ensure optimum durable performance, while highly warm but compressible down filling ensures warmth without the bulk. This is enhanced by the double zip baffle and the new oversize contoured thermocollar that creates a snug fit over the shoulders to eliminate heat loss through the bellows effect. Hood and baffle drawcords are also repositioned for ease of use from within the bag. Additionally, all Couloir sleeping bags feature a centre zip for easy access, a feature much appreciated when in the confines of a small lightweight tent.
The Robens Spire II Sleeping Bag has been constructed with a body contour profile alongside OneThermo insulation for an optimum warmth to weight ratio. Designed for three season use, it features a 3D hood profile and redefined neck baffle position to keep warmth in and draughts out, while a shark fin foot box offers extra insulation to where it is needed most. Additionally, a brushed lining lends high moisture transport for comfort and an inside pocket lets you keep valuables close at hand.
The Robens Serac 300 Sleeping Bag boasts a standard mummy profile and an RDS-certified 300g down filling for the best warmth to weight comfort ratio on most general outdoor adventures. The down filling is also highly compressible so can easily be packed away in its compression stuff stack when not in use, and is highly lightweight so won't weigh you down as you move. A neck baffle additionally minimises heat loss, while a shark fin foot box with extra insulation will provide optimum warmth to where it is needed, alongside allowing your feet to rest comfortably in a natural position. To finish, the durable riptop outer fabric is highly durable and tear resistant, and the lining offers a high moisture transport.
The Robens Couloir 350 Sleeping Bag contours to your body to provide the ultimate level of warmth while keeping the sleeping bag incredibly light for easy transportation. Warmth is further enhanced by a double zip baffle and oversized contoured thermocollar, creating a snug fit over the shoulders – which helps to eliminate heat through the bellows effect. Hood and baffle drawcords are conveniently placed for ease-of-use within the bag and the Couloir 350 also features a centre zip for easy access. Specifications Size: 220cm (L) x 80cm (W) x 51cm (W) Body Length: 195cm Seasons: 3 Shell: TORAY 20D 380T nylon Taffeta, 100% nylon Lining: 20D 380T nylon Taffeta, 100% nylon Filling: 350 g RDS certified duck down 95/5, 700 FP Construction: Box wall Zipper: YKK Auto lock - two-way open, center zip Temp (Tcomfort) woman: 2 Temp (Tlimit) man: -4 Temp (Textreme): -21 Colour: Yellow Pack Size: 24cm x 16cm Weight: 795g
Roben's Zigzag Slumber sleeping pad is made from premium quality, non-absorbent EVA, closed cell foam which is super comfortable and super durable. Great for use on all your travels and adventures the Zigzag mat packs up incredibly compactly for easy transportation due to the pads unique half dome dot design, which folds into itself. Pack straps are also included. Specifications Fabric: EVA closed cell foam Size: 180cm (L) x 48cm (W) x 2cm (H) R-Value: 2.2 (2°C) Colour: Green Pack Size: 48cm x 15cm x 9cm Weight: 320g
RockShox Charger Damper Bleed KitThis Charger Damper bleed kit is specifically designed for use with RockShox Charger/RaceDay dampers. It includes one RockShox syringe, two RockShox High Performance Suspension Fluid (120ml) bottles and one RockShox Charger1/Standard fitting.Use only RockShox parts with RockShox components. Installation of parts and accessories not originally intended could result in less than optimal performance and/or injury.Compatibility:This bleed kit is compatible with the following suspension fork part numbers:FS-BXR-RC-B1, FS-BXR-RC-B2, FS-BXR-RC-C1, FS-BXR-SEL-C2, FS-BXR-TEAM-A1, FS-BXR-TEAM-A2, FS-BXR-ULT-C2, FS-BXR-WC-B1, FS-BXR-WC-B2, FS-BXR-WC-C1, FS-LYRK-SEL-C3, FS-LYRK-ULT-C3, FS-PIKE-DJ-A2, FS-PIKE-DJ-A3, FS-PIKE-DJ-A4, FS-PIKE-RCT3-A2, FS-PIKE-RCT3-B1, FS-PIKE-RCT3-B2, FS-PIKE-SEL-B3, FS-PIKE-SEL-B4, FS-PIKE-ULT-B3, FS-PIKE-ULT-B4, FS-RVL-RC-A1, FS-RVL-RC-A2, FS-RVL-RC-A3, FS-RVL-RCT3-A3, FS-RVL-RCT3-A4, FS-RVL-RCT3-A5, FS-SID-RCT3-A4, FS-SID-RL-A4, FS-SID-RL-B1, FS-SID-RL-B2, FS-SID-RL-B3, FS-SID-RLC-A1, FS-SID-RLC-A2, FS-SID-RLC-B1, FS-SID-SEL-B4, FS-SID-SEL-C1, FS-SID-ULT-B4, FS-SID-ULT-C1, FS-SID-ULTC-B4, FS-SID-WC-B1, FS-SID-WC-B2, FS-SID-WC-B3, FS-SID-XX-A4, FS-SID-XX-B1, FS-SID-XXWC-A4, FS-SIDS-SEL-C1, FS-SIDS-ULT-C1, FS-YARI-RC-A1, FS-YARI-RC-B1, FS-YARI-RC-B2, FS-YARI-RC-B3, FS-ZEB-R-A1, FS-ZEB-SEL-A1, FS-ZEB-ULT-A1Features: Type: RockShox Charger Damper Bleed Kit Use: Mountain Bike (MTB) Compatibility: RockShox Pike/BoXXer and more Included: 1x RockShox syringe, 2x RockShox High Performance Suspension Fluid (120ml), x1 RockShox Charger1/Standard fitting for Charger/RaceDay dampers Genuine RockShox spare partsManufacturer's Part Number: 00.4318.007.000 Pink Pike/BoXXerBuy RockShox Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
RockShox Bleed Kit (XLoc/Reverb/Totem)This bleed kit is specifically designed for use with RockShox suspension forks with XLoc remote, Totem suspension forks and housing as well as the remote of RockShox Reverb Vario seatposts. It includes two RockShox syringes, two RockShox bleed fittings and one RockShox Torx T10 / T25 tool, so you'll have everything you need to bleed your setup quickly and easily.Use only RockShox parts with RockShox components. Installation of parts and accessories not originally intended could result in less than optimal performance and/or injury.Features: Use: Mountain Bike (MTB) Type: Bleed Kit XLoc, Reverb and Totem Compatibility: RockShox XLoc/Reverb/Totem Included: x2 RockShox syringes, x2 RockShox bleed fittings and x1 RockShox Torx T10 / T25 toolManufacturer's Part Numbers: 11.4315.011.030 Pink Inc. Syringes/ToolBuy RockShox Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
RockShox Reverb Hydraulic FluidOptimised for use with Reverb and Monarch XX rear shock remote levers, this excellent liquid works hard to keep your system in check. Perfect for keeping your Rockshox rear suspension setup running smoothly and efficiently.Features: Size: 120ml bottle Genuine RockShox hydraulic fluidBuy RockShox Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Rotor Cross Country Crank Arm Bumper SetThis stunning XC bumper set protects your crank arms against all the wear that comes with a long day exploring the mountains. When riding off-road you face everything from tree roots, rocks and unexpected jolts, so this superb bumper set will come in handy by offering another layer of protection.Features: Strong rubber construction Protection against wear Easy to useBuy Rotor Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Rotor 2Inpower Crank Arm Bumper SetThese superb bumpers are specifically designed for use with your Rotor 2INPower MTB cranks. Additionally, they provide excellent protection from scratches and chips caused by rocks, roots and trail obstacles. Finally, these come in a variety of selectable colour options, so you can compliment and customise your cranks with eye-catching bumpers.Features: Material: Rubber Compatibility: Rotor 2INPower MTB cranks Weight: 16.9gBuy Rotor Components from Chain Reaction Cycles, the World's Largest Online Bike Store.