Part of the Performance Elite series, this suspension fork features the exact same adjustments, damper, weight and 7000 series aluminium upper tubes as the Factory Series. The only difference is this version has an anodised finish on its upper tubes for extra protection against wear and corrosion, making it perfect for all weather and terrain conditions. Coming equipped with stiff 15QR x 110mm Boost axle spacing, 160mm travel and a wide range of adjustments, this is a great choice of upgrade for reliable front-end suspension performance wherever your next mountain adventure takes you. Float EVOL Air Spring Optimises small bump sensitivity by increasing negative air spring volume. Its linear spring curve delivers plushness off the top, extra mid-stroke support, and a more tunable bottom-out progression. Fox Suspension GRIP Damper Fox Suspension's GRIP damper is the benchmark for unparalleled ride quality and convenient 3-position adjustability. GRIP includes the brand's Open/Medium/Firm external fine-tuning dial, so you can customise ride performance on-the-fly. The GRIP damper achieves with the twist of a knob when typically, this level of adjustability would require the time-consuming and complicated task of completely disassembling and reassembling the fork. Technologies: Lower Leg Arch: This suspension fork's lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise the stiffness or strength requirements of modern enduro and gravity-style riding. Lower Leg Bleeders: Allows for atmospheric pressure equalization for better fork performance, allowing full travel to be achieved and increasing small bump sensitivity and responsiveness. Lower Leg Bypass Channels: Increasing air volume within the lower legs reduces the amount of additional unintended pressure ramping. Lower leg bath oil also circulates to the upper reaches of the legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Kabolt X Axle: Kabolt X is a lightweight bolt-on floating axle to shave grams and increase torsional stiffness via a sleeveless, single-sided pinch bolt design.
Whether you're exploring gravel roads or taking part in a cross country (XC) racing event, this drop bar lever is a perfect choice for simple and intuitive operation. It is specifically designed for use with the Fox Suspension Transfer SL Vario seatpost and it allows you to control your dropper post from the comfort of your handlebar. Suitable for use with road and gravel bike drop handlebars, this model is easy to install and comes complete with the necessary cable housing and accessories to make the process as straightforward as possible. For quick and consistent control of your dropper seatpost, the Fox Suspension Transfer Drop Bar Dual Pull Lever is the ideal choice. Manufacturer's Part Number: 925-05-000 Black
Designed from the ground up, this race ready XC fork is part of Fox Suspension's Performance Series with an anodised finish on its upper tubes for extra durability as well as protection against corrosion in wet conditions. It's also equipped with a chassis that's 15% stiffer than the 32 standard model and features a revised arch shape that offers improved head tube clearance with shorter rakes. All set for cross country racing, its lightweight Float EVOL air spring and GRIP damper provide excellent tuneability and control, so you can tweak your suspension to match your riding style as well as the terrain. Fox Suspension has classed this model as its lightest 34 ever. The 34 Step-Cast is designed from the ground up to deliver uncompromised XC race performance with class-leading tuneability, chassis stiffness and strength. Float EVOL Air Spring Returning with the same legendary suppleness and longevity, the EVOL air spring in 34’s now has an enlarged negative air spring to assist with mid-stroke support. It also now also comes with the option to tune the negative air spring with a volume spacer. FIT GRIP Damper Inspired from moto, the GRIP damper uses Fox Suspension's FIT sealed cartridge technology combined with a coil-sprung, independent floating piston. GRIP allows excess oil to purge through specially designed ports at the top of the damper to maintain consistent damping and increase durability. Technologies: Performance Series: Performance Series forks retain the same black anodized 7000 series aluminium upper tubes as Performance Elite, except paired with a GRIP damper. Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional micro-adjust between settings Detents. Low-speed rebound 10 clicks. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. The all-new 34 pulls out all the stops, shaving every possible gram while making sure not to compromise the stiffness or strength requirements of modern trail riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design is designed to pair perfectly with modern trail bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material. Updated Crown: Updated 58mm diameter crown. Manufacturer's Part Number: 910-21-015 Black 29" QR110 120mm 44mm
This remote lever mounts on the left underneath your handlebars instead of a shift lever and delivers fast and accurate operation when you need to adjust your height.
Easy to install, this remote clamps around your handlebar to allow you to effortlessly control your Fox Suspension Transfer dropper seatpost. Offering improved ergonomics, this model makes operating your seatpost easier as you weave your way from trail to trail. Another benefit is its 34% lighter than the previous version, so you won't have to worry about weighing down your handlebar with unnecessary excess grams. Ideal for riders who already own the Fox Suspension Transfer dropper seatpost and want straightforward actuation on every trail adventure. The Gold Standard The Transfer seatpost is lighter and tighter than ever before. Less weight, reduced length and decreased insertion depth means a better fit on more frames. Improved durability and easier serviceability means more riding and less downtime. Available with up to 200mm of drop, Transfer is ready to tackle the nastiest terrain. Manufacturer's Part Number: 925-06-005 Black 2x/3x
Featuring a hard-wearing anodised finish, this Performance Series mountain bike (MTB) rear shock delivers excellent durability and corrosion resistance, making it ideal for shredding your local trails in all-weather conditions. This model is also equipped with a lightweight one-piece EVOL air spring, which ensures you'll benefit from its improved responsiveness and sensitivity as it absorbs the sudden knocks and bumps associated with trail-riding. DPS Damper and Adjustments This trail-ready rear shock is kitted out with a dual-piston system (DPS) damper that pairs exceptional bump compliance with efficiency, helping you conserve energy for when you need it most. Its damper uses a three-position lever to allow you to easily switch between its open, medium and firm modes. Fox Suspension has also equipped this model with an open mode adjust tuning range (1, 2, 3), rebound and air spring pressure adjustments, so you can fine-tune your rear suspension to fit in with your riding style as well as the terrain conditions. Technologies: DPS damper with three positions - Open, Medium, Firm modes. Dual Piston valve design improves both rebound and compression flow. Lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivity. Manufacturer's Part Numbers: 972-01-504 Black 165x40mm Trunnion SV 972-01-505 Black 185x55mm Trunnion SV
The Undisputed All-Mountain Champion The legendary 36 is no stranger to accolades, winning awards, accolades, and Enduro World Series (EWS) races with equal panache. 36 offers an unmatchable combination of performance, tuneability, and light weight to ensure the winning ways continue, everywhere from big backcountry routes to the EWS circuit. Float EVOL Air Spring EVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL’s linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. FIT GRIP2 Damper Fox Suspension's GRIP2 damper is the benchmark for unparalleled ride quality and ultra-precise adjustability. GRIP2 includes the brand's patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance. GRIP2 achieves with the twist of a knob what typically requires the time-consuming and complicated task of completely disassembling and reassembling the fork. Please Note: The images on this webpage are for reference only and the decals come supplied in the box for you to fit yourself when you receive the forks. Technologies: Adjustments: High-speed compression (with VVC) 8 clicks; Low-speed compression 16 clicks; High-speed rebound (w/VVC) 8 clicks and Low-speed rebound 16 clicks.
Ready for everything from backroad adventures to XC racing, this versatile dropper seat post is engineered for performance. It's part of Fox Suspension's prestigious Factory Series that's World Cup proven and includes the best-of-the-best technology, so you can stay in full control wherever your next ride takes you. Coming equipped with a genuine Kashima upper coating, it provides buttery smooth, ultra-durable operation, while its anodised lower coating delivers extra protection against wear and corrosion. Another highlight is its coil spring, internal cable routing and travel configuration options that are specifically developed for the rigours of gravel riding and cross country. Keeping its weight as low as possible, this Factory Series version also comes complete with titanium hardware for a further 10g of weight savings. Super Lightweight Dropper Seat Post Meet the Transfer SL. At 128 grams (25%) lighter than the regular Transfer post, Fox Suspension has classed it as the lightest mainstream dropper post on the market. Period. With lever options for flat bars, drop bars, and 1x and 2x drivetrains it finally brings the word “shred” into the super-lightweight XC and Gravel conversation. Technologies: Factory Series: “Factory” says it all. The best-of-the-best technology Fox Suspension have to offer is available in Factory Series models with a buttery smooth, ultra-durable Genuine Kashima Coat. These products are World Cup proven. - Windows in lower post allow cable clamp/slack to be pulled from post side for compatibility with GRX-style dropper levers and minimises extra cable housing length. - Longer travel configurations offer exposed length of 290mm for taller riders. - Shorter travel configurations offer shorter total length for smaller riders. - Coil spring for consistent return performance. - 70-85 degree seat angles are supported. - 7mm and 7x9mm saddle rails supported. - Compatible with 1x lever, which is Matchmaker, Shimano GRX, and I-SPEC EV compatible. (Sold separately). - Factory post includes Ti hardware for additional 10g weight savings. - Internal routing only. - Lightweight design. Manufacturer's Part Numbers: 925-01-201 Black 350mm 27.2 x 50mm 925-01-200 Black 370mm 27.2 x 70mm 925-01-206 Black 355mm 30.9 x 75mm 925-01-204 Black 380mm 30.9 x 100mm 925-01-207 Black 355mm 31.6 x 75mm 925-01-205 Black 380mm 31.6 x 100mm
No stranger to winning awards, accolades and Enduro World Series (EWS) races, this E-MTB suspension fork is built to perform everywhere from big backcountry routes to the EWS circuit. Featuring a new design inside-and-out, this model is part of Fox Suspension's Performance Series and includes an anodised finish on its upper tubes for extra protection against wear and corrosion. It's also equipped with Boost axle spacing for additional stiffness, making it ideal for modern enduro riding. Coming complete with a Float EVOL air spring and a GRIP damper with three-position on-the-fly adjustability, this E-bike-ready fork provides a wide range of customisation, so you can benefit from a more rider-tuned feel. E-MTB Fork with FIT GRIP Damper Inspired from moto, the GRIP damper uses Fox Suspension's FIT sealed cartridge technology combined with a coil-sprung, independent floating piston. GRIP allows excess oil to purge through specially designed ports at the top of the damper to maintain consistent damping and increase durability. Float EVOL Air Spring EVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL’s linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's Lower Leg channels and Bleeders (push-button bleeders available separately, which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference. Technologies: Performance Series: Performance Series forks retain the same black anodized 7000 series aluminum upper tubes as Performance Elite, except paired with a GRIP damper. Push-button bleeders are not included but can be purchased separately. Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional micro-adjust between settings Detents. Low-speed rebound 10 clicks. Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don’t want to bother with it, you can just install the front wheel and get on with your ride. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material. - Increased crown diameter to match modern frame shape profiles. - Optional mudguard with sturdy 4-point direct-mount attachment protects upper tubes and dust wipers from dirt and debris. (available separately). Manufacturer's Part Numbers: 910-20-206 Black 29" QR110 160mm 51mm 910-20-205 Black 29" QR110 160mm 44mm
This high-quality mountain bike (MTB) suspension fork is part of the prestigious Factory Series, which means it comes trail-ready with anodised upper tubes for hard-wearing performance and durability wherever your next ride takes you. Engineered for everything from day long epics on your favourite trails to modern enduro racing, it's kitted out with Boost axle spacing for extra stiffness as you dominate your way around the mountain. Another highlight is its lightweight Float EVOL air spring and GRIP2 damper with Variable Valve Control (VVC) for undisputed tuneability and control. As a result, it's easy to dial in your settings to match your riding style as well as the terrain. Coming complete with 160mm travel as well as many of the brand's finest technologies, this is a great choice of upgrade for conquering everywhere from big backcountry routes to the EWS circuit. MTB Fork with GRIP2 Damper Fox Suspension's GRIP2 damper is the benchmark for unparalleled ride quality and ultra-precise adjustability. GRIP2 includes the brand's patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance. GRIP2 achieves with the twist of a knob what typically requires the time-consuming and complicated task of completely disassembling and reassembling the fork. Float EVOL Air Spring EVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL’s linear spring curve delivers plushness off the top, extra mid-stroke support, and more tunable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's updated Lower Leg channels and Bleeders, which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference. Technologies: Performance Elite Series: Performance Elite forks retain the same adjustments, features, dampers, weight, and 7000 series aluminum upper tubes as Factory Series, but have black anodised stanchions instead of Genuine Kashima Coat. Adjustments: High-speed compression (with VVC) 8 clicks. Low-speed compression 16 clicks. High-speed rebound (with VVC) 8 clicks. Low-speed rebound 16 clicks. Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don’t want to bother with it, you can just install the front wheel and get on with your ride. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Bleeders: Fox Suspension's lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button. Pressure build-up in the lower legs dramatically decreases fork performance, preventing full travel from being achieved, and diminishing small bump sensitivity and responsiveness. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's all-new lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material. GRIP2: High-speed compression now with patented VVC (Variable Valve Control). GRIP2 is Fox Suspension's next-evolution sealed cartridge FIT system, the brand's highest-performing gravity-focused damper. Manufacturer's Part Numbers: 910-20-239 Black 27.5" QR110 160mm 44mm 910-20-232 Black 29" QR110 160mm 44mm
Part of Fox Suspension's Performance Series, this XC suspension fork is equipped with a high-quality anodised finish on its upper tubes for extra durability and protection against corrosion during wet racing conditions. It's also kitted out with Boost axle spacing for additional stiffness as you charge across the most demanding of terrain conditions. Thanks to its Float EVOL air spring and FIT GRIP damper with a three-position lever, this model provides you with a wide range of adjustment features so you can easily tweak it to fit in with your riding style. Another highlight is its lockout feature that delivers increased efficiency, making it a dependable choice of upgrade for modern XC racing. XC Fork with Step-Cast Design 32 SC is the ultralightweight cross-country racing weapon. The Step-Cast's pioneering lower leg shape isn't just for looks, its narrow stance and stepped design saves weight, decreases frontal area, and provides clearance for the spokes and brake rotor. The 32 SC features 32mm upper tubes and ample bushing overlap for a quality ride and the hollowed-out lower legs provide even more weight savings. Optimised for 100mm of travel, the Step-Cast lower leg design and narrow crown spacing save weight while the 32mm upper tubes maintain FOX ride quality. Starting at 1387g, the 32 Step-Cast (SC) fork is classed by Fox Suspension as its lightest cross-country fork ever. FIT GRIP Damper with 3-Position Lever Inspired from moto, the GRIP damper uses Fox Suspension's FIT sealed cartridge technology combined with a coil-sprung, independent floating piston. GRIP allows excess oil to purge through specially designed ports at the top of the damper to maintain consistent damping and increase durability. Technologies: Performance Series: Performance Series forks retain the same black anodized 7000 series aluminum upper tubes as Performance Elite, except paired with a GRIP damper. Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional micro-adjust between settings Detents. Low-speed rebound 10 clicks. Manufacturer's Part Numbers: 910-20-231 Black 27.5 QR110 100mm 44mm 910-20-227 Black 29 QR110 100mm 44mm 910-20-226 Black 29 QR100 100mm 51mm 910-20-224 Black 29 QR110 100mm 51mm 910-20-225 Black 29 QR100 100mm 44mm
This MTB fork features a Float EVOL air spring and a FIT GRIP damper with three positions of adjustment, so you can set it up to perfectly match your riding style as well as the terrain. Fox Suspension has also equipped this model with a lightweight yet robust chassis for a superior strength to weight ratio. Item Top Features Continued: Travel: 140mm Remote Operated: No Lever Operated: Yes Lockout: No Part Numbers: 29", 51mm Offset: 910-20-968; 27.5", 44mm Offset: 910-20-987; 29", 44mm Offset: 910-20-969