Designed in conjunction with Chris King, Peaty's MK2 Tubeless Valves are made from premium lightweight, high strength 7075 aluminium, and fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims.Lightweight & durable 7050 aluminium constructionColoured to match Chris King componentsSlotted base compatible with or without tyre insertsValve caps double as 3.4mm spoke key and valve core removal toolThe unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, the MK2 valves have a straight-through design so there's no reduction of sealant or air flow when tyre inserts are not used.Fitting couldn't be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal. Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails.
Designed in conjunction with Chris King, Peaty's MK2 Tubeless Valves are made from premium lightweight, high strength 7075 aluminium, and fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims.Lightweight & durable 7050 aluminium constructionColoured to match Chris King componentsSlotted base compatible with or without tyre insertsValve caps double as 3.4mm spoke key and valve core removal toolThe unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, the MK2 valves have a straight-through design so there's no reduction of sealant or air flow when tyre inserts are not used.Fitting couldn't be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal. Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails.
Designed in conjunction with Chris King, Peaty's MK2 Tubeless Valves are made from premium lightweight, high strength 7075 aluminium, and fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims.Lightweight & durable 7050 aluminium constructionColoured to match Chris King componentsSlotted base compatible with or without tyre insertsValve caps double as 3.4mm spoke key and valve core removal toolThe unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, the MK2 valves have a straight-through design so there's no reduction of sealant or air flow when tyre inserts are not used.Fitting couldn't be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal. Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails.
Designed in conjunction with Chris King, Peaty's MK2 Tubeless Valves are made from premium lightweight, high strength 7075 aluminium, and fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims.Lightweight & durable 7050 aluminium constructionColoured to match Chris King componentsSlotted base compatible with or without tyre insertsValve caps double as 3.4mm spoke key and valve core removal toolThe unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, the MK2 valves have a straight-through design so there's no reduction of sealant or air flow when tyre inserts are not used.Fitting couldn't be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal. Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails.
Designed in conjunction with Chris King, Peaty's MK2 Tubeless Valves are made from premium lightweight, high strength 7075 aluminium, and fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims.Lightweight & durable 7050 aluminium constructionColoured to match Chris King componentsSlotted base compatible with or without tyre insertsValve caps double as 3.4mm spoke key and valve core removal toolThe unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, the MK2 valves have a straight-through design so there's no reduction of sealant or air flow when tyre inserts are not used.Fitting couldn't be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal. Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails.
Designed in conjunction with Chris King, Peaty's MK2 Tubeless Valves are made from premium lightweight, high strength 7075 aluminium, and fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims.Lightweight & durable 7050 aluminium constructionColoured to match Chris King componentsSlotted base compatible with or without tyre insertsValve caps double as 3.4mm spoke key and valve core removal toolThe unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, the MK2 valves have a straight-through design so there's no reduction of sealant or air flow when tyre inserts are not used.Fitting couldn't be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal. Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails.
Designed in conjunction with Chris King, Peaty's MK2 Tubeless Valves are made from premium lightweight, high strength 7075 aluminium, and fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims.Lightweight & durable 7050 aluminium constructionColoured to match Chris King componentsSlotted base compatible with or without tyre insertsValve caps double as 3.4mm spoke key and valve core removal toolThe unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, the MK2 valves have a straight-through design so there's no reduction of sealant or air flow when tyre inserts are not used.Fitting couldn't be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal. Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails.
Peaty is the new signature grip from Steve Peat. The Peaty grip has a small diameter for a more direct feel. It features a soft compound chocolate block pattern for increased grip and it has Peaty inscribed on it, for increased cool.The Peaty grip comes in two colours to match your bike. Graphite grey with red anodized Lock-On collars or, for the full patriotic effect, bright white with contrasting red and blue collars..Available In Various Colours : White grips with anodized red and blue ringsGraphite grips with anodized red ringsBlack grips with anodized pewter rings.
Designed in conjunction with Chris King, Peaty's MK2 Tubeless Valves are made from premium lightweight, high strength 7075 aluminium, and fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims.Lightweight & durable 7050 aluminium constructionColoured to match Chris King componentsSlotted base compatible with or without tyre insertsValve caps double as 3.4mm spoke key and valve core removal toolThe unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, the MK2 valves have a straight-through design so there's no reduction of sealant or air flow when tyre inserts are not used.Fitting couldn't be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal. Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails.
Designed in conjunction with Chris King, Peaty's MK2 Tubeless Valves are made from premium lightweight, high strength 7075 aluminium, and fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims.Lightweight & durable 7050 aluminium constructionColoured to match Chris King componentsSlotted base compatible with or without tyre insertsValve caps double as 3.4mm spoke key and valve core removal toolThe unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, the MK2 valves have a straight-through design so there's no reduction of sealant or air flow when tyre inserts are not used.Fitting couldn't be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal. Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails.
Designed in conjunction with Chris King, Peaty's MK2 Tubeless Valves are made from premium lightweight, high strength 7075 aluminium, and fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims.Lightweight & durable 7050 aluminium constructionColoured to match Chris King componentsSlotted base compatible with or without tyre insertsValve caps double as 3.4mm spoke key and valve core removal toolThe unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, the MK2 valves have a straight-through design so there's no reduction of sealant or air flow when tyre inserts are not used.Fitting couldn't be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal. Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails.
Designed in conjunction with Chris King, Peaty's MK2 Tubeless Valves are made from premium lightweight, high strength 7075 aluminium, and fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims.Lightweight & durable 7050 aluminium constructionColoured to match Chris King componentsSlotted base compatible with or without tyre insertsValve caps double as 3.4mm spoke key and valve core removal toolThe unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, the MK2 valves have a straight-through design so there's no reduction of sealant or air flow when tyre inserts are not used.Fitting couldn't be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal. Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails.