Peaty's Foaming Drivetrain Degreaser is the ultimate bike specific, high strength foaming drivetrain degreaser. The powerful biodegradable formula has been designed to be tough on grime for fast and powerful drivetrain degreasing, while remaining kind to the rest of your bike and the environment. While Foaming Drivetrain Degreaser is formulated to be aggressive on chain lubricants and everyday dirt and grime, it will not attack waterproof bearing greases. If you want a great degreaser for your bike, Peaty's Foaming Drivetrain Degreaser is the perfect choice!
Do you love the standard Peaty's LinkLube All-Weather but want it to run even cleaner, smoother, quieter and last 30% longer LinkLube All-Weather Premium is the lube you've been waiting for!Cleaner, Smoother, Quieter & 30% longer lastingDesigned for the longest rides in mixed conditionsMint scent matches the much loved All Weather Standard LubePremium gold print ads an exclusive touch to a more premium lubesAvailable in 60ml and 120mlFor use in all conditions, LinkLube All-Weather uses the same scientific approach as our much loved LinkLube All-Weather but dials the quality of the ingredients up to 11. With the same chain-cleaning properties as our standard All-Weather Lube, the milk-white LinkLube Premium penetrates deep inside the chain and replaces moisture, grit & grime with a long-lasting blend of oils, waxes and non-toxic Nano particles.All-Weather Premium has been ridden over thousands of miles of testing and development over the last couple of years by our Motley crew of riders and product testers. Over these miles of real-world testing, they have found on average, it lasted 30% longer in the same conditions as would standard All-Weather Lube. Through the first wave of lockdown, Paralympian Steve Bate was using the latest formulation back comparing it to our standard LinkLube All-Weather. During his Epic 1000 mile turbo trainer ride over ten days, the result showed that All-Weather Premium lasted a massive 500 miles before wearing out. In comparison LinkLube All-Weather Standard lasted 380 miles in the same controlled conditions showing a 31.5% increase in durability.
Designed in conjunction with Chris King, Peaty's MK2 Tubeless Valves are made from premium lightweight, high strength 7075 aluminium, and fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims.Lightweight & durable 7050 aluminium constructionColoured to match Chris King componentsSlotted base compatible with or without tyre insertsValve caps double as 3.4mm spoke key and valve core removal toolThe unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, the MK2 valves have a straight-through design so there's no reduction of sealant or air flow when tyre inserts are not used.Fitting couldn't be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal. Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails.
Designed in conjunction with Chris King, Peaty's MK2 Tubeless Valves are made from premium lightweight, high strength 7075 aluminium, and fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims.Lightweight & durable 7050 aluminium constructionColoured to match Chris King componentsSlotted base compatible with or without tyre insertsValve caps double as 3.4mm spoke key and valve core removal toolThe unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, the MK2 valves have a straight-through design so there's no reduction of sealant or air flow when tyre inserts are not used.Fitting couldn't be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal. Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails.
Designed in conjunction with Chris King, Peaty's MK2 Tubeless Valves are made from premium lightweight, high strength 7075 aluminium, and fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims.Lightweight & durable 7050 aluminium constructionColoured to match Chris King componentsSlotted base compatible with or without tyre insertsValve caps double as 3.4mm spoke key and valve core removal toolThe unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, the MK2 valves have a straight-through design so there's no reduction of sealant or air flow when tyre inserts are not used.Fitting couldn't be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal. Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails.
Introducing the Peaty's x 50to01 Tubeless MK2 Rasta Valves. Made from premium lightweight, high strength 7075 aluminium, Peaty's MK2 Tubeless Valves fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims.Made in collaboration with 50To01Lightweight & high strength 7075 alloyIntegrated valve core remover cap & spoke keySize: 42mmThe unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, these valves have a straight-through design so there's no reduction of sealant or air flow when tyre inserts are not used.Fitting couldn't be easier. Integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal.Designed by riders, for riders. These valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails.Crushed a rubber or snapped an o-ring No problem, check out our maintenance kits to spruce up your valves when swapping to your next set of wheels or new bike.
Designed in conjunction with Chris King, Peaty's MK2 Tubeless Valves are made from premium lightweight, high strength 7075 aluminium, and fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims.Lightweight & durable 7050 aluminium constructionColoured to match Chris King componentsSlotted base compatible with or without tyre insertsValve caps double as 3.4mm spoke key and valve core removal toolThe unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, the MK2 valves have a straight-through design so there's no reduction of sealant or air flow when tyre inserts are not used.Fitting couldn't be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal. Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails.
Designed in conjunction with Chris King, Peaty's MK2 Tubeless Valves are made from premium lightweight, high strength 7075 aluminium, and fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims.Lightweight & durable 7050 aluminium constructionColoured to match Chris King componentsSlotted base compatible with or without tyre insertsValve caps double as 3.4mm spoke key and valve core removal toolThe unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, the MK2 valves have a straight-through design so there's no reduction of sealant or air flow when tyre inserts are not used.Fitting couldn't be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal. Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails.
This is a refill pack for the Peaty s Holeshot CO2 MTB Tyre inflator. It contains five 25g CO2 cartridges per pack and includes 1 freeze protector sleeve.25g Cartridges for MTB / 16g Cartridges for Road & Gravel5 x threaded CO2 cartridges per pack, including 1 freeze protector sleeve with unique closed base designPackaged using recycled cardboard header cards and biodegradable bags
Is your loved one looking dull and tired after a hard, filthy ride Peaty's protect & shine silicone spray to the rescue!Bike bling for a race-ready finishHelps reduce dirt & mud clingReduces suspension frictionProtects rubber seals400mlSpray onto paints, metals, plastics or carbon parts to bring that steed back to a race-ready finish. Spray sparingly onto your stanchions and seals to reduce friction, keep shafts slippery smooth and protect rubbers from prematurely drying up. Applying liberally to your frame will build up a protective silicone film which reduces mud cling and makes future cleaning easier - less time cleaning, more time riding!
With 17 Downhill World Cup wins to his name, could Peaty s have called it anything else Peaty and the team put their heads together with our scientists to develop the most effective PTFE free maintenance spray available, Peaty's PT17 Maintenance Spray.Lubricates & protectsDrives out moisture & grimePrevents Rust and corrosionHelps reduce dirt & mud clingFrees up seized parts400ml AerosolPeaty s want their products to be as kind as possible to the environment without compromising on performance, so after months of research and product refinement, they finally nailed it. They combined cutting edge corrosion inhibiting technology with a careful blend of oils to deliver a bike specific maintenance spray suitable for both the professional workshop and the home mechanic, that is readily biodegradable.Their highly versatile, Readily biodegradable, and PTFE-Free maintenance spray displaces moisture from freshly washed steeds, leaving light lubrication and a long-lasting thin film anti-corrosive coating on chainsets and other moving metal parts. A deep penetrator, PT17 will also act as a freeing agent to release corroded and seized parts. Use on paintwork to reduce mud cling, reduce weight on your winning loamy race run and reduce clean up time after your next ride - less time cleaning, more time riding! Safe for use on all metal parts, paintwork, rubber, plastic and carbon. please always test on an inconspicuous area before use.
Ideal for use on carbon fibre handlebars, stems and seat posts, the carbon assembly paste is a specially formulated blend of highly refined natural oils and ultra-fine non-slip pumice particles, designed to eliminate slip between carbon fibre components. Gripper paste increases the friction between carbon fibre components and their mating surfaces, so reducing the torque required to clamp them. The non-toxic formula is also resistant to detergents and washout to give you long-lasting performance in the harshest conditions.For use on carbon fibre handlebars, stems & seat postsEliminates slip on clamped parts & Prevents seizingMade of renewable, natural oils and pumice particlesReadily Biodegradable100% PCR & PIR Recycled PackagingM15 threaded cap