Peaty's unique single-sided fork design allows for multiple plug sizes to be easily rolled into the dip of the fork and pushed straight into the tyre. The open side to the fork then allows for the tool to be easily pulled back out of the hole without pulling the plug out with it.Available in 12x Chris King coloursQuick and easy to insert tyre plugs. With our unique single-sided fork design, you simply push and roll the plug into the hook of the forkWith no tight gap to squeeze through, the plug is far less likely to pull back out when the tool is extracted the fork is sharp tipped & as slim as possible, so it doesn't widen the size of the - hole already thereFork made from 316 stainless steelBody made from anodised 6061 aluminiumKnurled body and ribbed lid / handle for extra gripWeather sealing O-rings make the tool waterproof when assembledEach kit comes with one sheet of 3x 1.5mm and one sheet of 3x 3mm plugsMade from high quality 316 Stainless steel, the fork is designed to be as short as possible to reduce the chance of you puncturing your rim tape when inserting a plug. The fork has also been designed with a reaming texture on the shaft, to clean out punctures before plugging, and to be as slim as possible, so it doesn't widen the size of the hole already there.Shrinking down to a tiny 65mm x 19mm, this tool has been designed to easily fit into your pocket or slot into a tool wrap or backpack. With knurling on the tool base and ribbing on the lid, you shouldn't have any issues gripping the tool, even in the muddiest of conditions.Simply unscrew the lid and thread it onto the rear of the tool to make a sturdy handle to hold onto while inserting the plug. This pack includes three thick (3mm) plugs and three thin (1.5mm) plugs. These plug sheets can be neatly wrapped around the fork and stored neatly inside the compact water-sealed body. Holeshot refill plug sheets also sold separately packaged with cardboard header cards & in biodegradable bags.
Peaty's unique single-sided fork design allows for multiple plug sizes to be easily rolled into the dip of the fork and pushed straight into the tyre. The open side to the fork then allows for the tool to be easily pulled back out of the hole without pulling the plug out with it.Available in 12x Chris King coloursQuick and easy to insert tyre plugs. With our unique single-sided fork design, you simply push and roll the plug into the hook of the forkWith no tight gap to squeeze through, the plug is far less likely to pull back out when the tool is extracted the fork is sharp tipped & as slim as possible, so it doesn't widen the size of the - hole already thereFork made from 316 stainless steelBody made from anodised 6061 aluminiumKnurled body and ribbed lid / handle for extra gripWeather sealing O-rings make the tool waterproof when assembledEach kit comes with one sheet of 3x 1.5mm and one sheet of 3x 3mm plugsMade from high quality 316 Stainless steel, the fork is designed to be as short as possible to reduce the chance of you puncturing your rim tape when inserting a plug. The fork has also been designed with a reaming texture on the shaft, to clean out punctures before plugging, and to be as slim as possible, so it doesn't widen the size of the hole already there.Shrinking down to a tiny 65mm x 19mm, this tool has been designed to easily fit into your pocket or slot into a tool wrap or backpack. With knurling on the tool base and ribbing on the lid, you shouldn't have any issues gripping the tool, even in the muddiest of conditions.Simply unscrew the lid and thread it onto the rear of the tool to make a sturdy handle to hold onto while inserting the plug. This pack includes three thick (3mm) plugs and three thin (1.5mm) plugs. These plug sheets can be neatly wrapped around the fork and stored neatly inside the compact water-sealed body. Holeshot refill plug sheets also sold separately packaged with cardboard header cards & in biodegradable bags.
Peaty's unique single-sided fork design allows for multiple plug sizes to be easily rolled into the dip of the fork and pushed straight into the tyre. The open side to the fork then allows for the tool to be easily pulled back out of the hole without pulling the plug out with it.Available in 12x Chris King coloursQuick and easy to insert tyre plugs. With our unique single-sided fork design, you simply push and roll the plug into the hook of the forkWith no tight gap to squeeze through, the plug is far less likely to pull back out when the tool is extracted the fork is sharp tipped & as slim as possible, so it doesn't widen the size of the - hole already thereFork made from 316 stainless steelBody made from anodised 6061 aluminiumKnurled body and ribbed lid / handle for extra gripWeather sealing O-rings make the tool waterproof when assembledEach kit comes with one sheet of 3x 1.5mm and one sheet of 3x 3mm plugsMade from high quality 316 Stainless steel, the fork is designed to be as short as possible to reduce the chance of you puncturing your rim tape when inserting a plug. The fork has also been designed with a reaming texture on the shaft, to clean out punctures before plugging, and to be as slim as possible, so it doesn't widen the size of the hole already there.Shrinking down to a tiny 65mm x 19mm, this tool has been designed to easily fit into your pocket or slot into a tool wrap or backpack. With knurling on the tool base and ribbing on the lid, you shouldn't have any issues gripping the tool, even in the muddiest of conditions.Simply unscrew the lid and thread it onto the rear of the tool to make a sturdy handle to hold onto while inserting the plug. This pack includes three thick (3mm) plugs and three thin (1.5mm) plugs. These plug sheets can be neatly wrapped around the fork and stored neatly inside the compact water-sealed body. Holeshot refill plug sheets also sold separately packaged with cardboard header cards & in biodegradable bags.
Keep your Peaty s Holeshot Kit topped up with some spare plugs for those trailside punctures. This pack contains 6 plugs.Available in 1.5mm & 3mm plug sizes6 plugs per pack, in 2 sheets of 3 plugsDesigned to fit perfectly into the body of Peaty's Holeshot Tyre Puncture Plugger toolPackaged using recycled cardboard header cards and biodegradable bags
Keep your Peaty s Holeshot Kit topped up with some spare plugs for those trailside punctures. This pack contains 6 plugs.Available in 1.5mm & 3mm plug sizes6 plugs per pack, in 2 sheets of 3 plugsDesigned to fit perfectly into the body of Peaty's Holeshot Tyre Puncture Plugger toolPackaged using recycled cardboard header cards and biodegradable bags
Peaty's unique single-sided fork design allows for multiple plug sizes to be easily rolled into the dip of the fork and pushed straight into the tyre. The open side to the fork then allows for the tool to be easily pulled back out of the hole without pulling the plug out with it.Available in 12x Chris King coloursQuick and easy to insert tyre plugs. With our unique single-sided fork design, you simply push and roll the plug into the hook of the forkWith no tight gap to squeeze through, the plug is far less likely to pull back out when the tool is extracted the fork is sharp tipped & as slim as possible, so it doesn't widen the size of the - hole already thereFork made from 316 stainless steelBody made from anodised 6061 aluminiumKnurled body and ribbed lid / handle for extra gripWeather sealing O-rings make the tool waterproof when assembledEach kit comes with one sheet of 3x 1.5mm and one sheet of 3x 3mm plugsMade from high quality 316 Stainless steel, the fork is designed to be as short as possible to reduce the chance of you puncturing your rim tape when inserting a plug. The fork has also been designed with a reaming texture on the shaft, to clean out punctures before plugging, and to be as slim as possible, so it doesn't widen the size of the hole already there.Shrinking down to a tiny 65mm x 19mm, this tool has been designed to easily fit into your pocket or slot into a tool wrap or backpack. With knurling on the tool base and ribbing on the lid, you shouldn't have any issues gripping the tool, even in the muddiest of conditions.Simply unscrew the lid and thread it onto the rear of the tool to make a sturdy handle to hold onto while inserting the plug. This pack includes three thick (3mm) plugs and three thin (1.5mm) plugs. These plug sheets can be neatly wrapped around the fork and stored neatly inside the compact water-sealed body. Holeshot refill plug sheets also sold separately packaged with cardboard header cards & in biodegradable bags.
Born in the lab and raised between the tapes, Peaty's Link Lube is a minty fresh, triple distilled, ultra high speed chain oil for use in all conditions.Unique formula with two-parts cleans and lubes your chainSecret sauce provides long lasting protection in all conditionsClear base is anti-corrosive and water displacing to help make your chain last longerThe unique two-part formula penetrates and cleans deep inside your chain, driving out moisture, grit and grime and replacing them with unique blend of oils and waxes (Peaty's secret sauce) to lubricate and protect. Yes, you read that correctly... Peaty's Link Lube actually cleans your chain as you use it! LinkLube features a mystery blue secret sauce which enables the lube to be used in all weather conditions.The secret sauce is a unique compound of oils and waxes which are usually only found individually in either wet or dry lubes. This provides incredible long-lasting protection in the wet, while remaining clean in dry and dusty conditions. The clear base lube is an anti-corrosive, fast penetrating, water displacing oil which will find its way into every nook and cranny of your chain. Once it reaches the inner depths of your chain links, the base oil will drive out moisture, grit and grime and leave behind the special sauce to reduce friction, reduce vibration and reduce drivetrain noise.
This thin, single core cylindrical brush is the perfect small-space detailing partner to our beasty bog brush. Designed to get into those small hard-to-clean gaps like suspension linkages, pedals, fork braces, seat rails, hubs and in between spokes. The stiff wire core is coated to prevent damage while the thick, super-soft cotton tip also prevents the end of the wire core from scratching paint.Thin cylindrical shaped for hard to reach areasCrimped medium density bristles made from post-consumer recycled materialUnique soft cotton tip to prevent scratchingPlastic coated wire core also helps prevent scratchingIdeal for use on suspension linkages, pedals, seat rails, hubs and spokesMade from waxed beech woodLaser etched Peaty's logo on the handle
Peaty s Tubeless Conversion Kit includes everything you need to run a fully optimised tubeless setup Peaty s Rim Tape, MK2 Tubeless Valves and Holeshot Sealant. If you value more time spent on the bike and less time fixing punctures, this is the perfect set up.Includes Peaty's latest silver-printed Tubeless Rim TapeBlack MK2 Tubeless Valves and Holeshot Biofibre Tubeless SealantPresented in specially-designed recycled packaging with a handy setup guide on the box and QR links to step by step videos for each stage of installationIdeal for riders wanting to spend more time on the bike and less time fixing puncturesPeaty's Tubeless Conversion kits are beautifully laid out with easy to follow setup instructions. These conversion kits are available in a variety of configurations so that you can ride with the perfect tubeless set up whatever your discipline: Road, Gravel, XC, Enduro, Downhill all good to go. Every conversion kit features a handy installation guide on the box, with QR links to step by step installation for each stage of installation rest assured that the installation process will be slick and swift.Available in 4 flavours:Road/Gravel: 21mm tape / 60mm valves / 120ml SealantXC/Trail: 25mm tape / 42mm valves / 240ml SealantDH/Enduro: 30mm tape / 42mm valves / 240ml SealantDH Wide: 35mm tape / 42mm valves / 240ml Sealant
Peaty s Tubeless Conversion Kit includes everything you need to run a fully optimised tubeless setup Peaty s Rim Tape, MK2 Tubeless Valves and Holeshot Sealant. If you value more time spent on the bike and less time fixing punctures, this is the perfect set up.Includes Peaty's latest silver-printed Tubeless Rim TapeBlack MK2 Tubeless Valves and Holeshot Biofibre Tubeless SealantPresented in specially-designed recycled packaging with a handy setup guide on the box and QR links to step by step videos for each stage of installationIdeal for riders wanting to spend more time on the bike and less time fixing puncturesPeaty's Tubeless Conversion kits are beautifully laid out with easy to follow setup instructions. These conversion kits are available in a variety of configurations so that you can ride with the perfect tubeless set up whatever your discipline: Road, Gravel, XC, Enduro, Downhill all good to go. Every conversion kit features a handy installation guide on the box, with QR links to step by step installation for each stage of installation rest assured that the installation process will be slick and swift.Available in 4 flavours:Road/Gravel: 21mm tape / 60mm valves / 120ml SealantXC/Trail: 25mm tape / 42mm valves / 240ml SealantDH/Enduro: 30mm tape / 42mm valves / 240ml SealantDH Wide: 35mm tape / 42mm valves / 240ml Sealant
Peaty s Tubeless Conversion Kit includes everything you need to run a fully optimised tubeless setup Peaty s Rim Tape, MK2 Tubeless Valves and Holeshot Sealant. If you value more time spent on the bike and less time fixing punctures, this is the perfect set up.Includes Peaty's latest silver-printed Tubeless Rim TapeBlack MK2 Tubeless Valves and Holeshot Biofibre Tubeless SealantPresented in specially-designed recycled packaging with a handy setup guide on the box and QR links to step by step videos for each stage of installationIdeal for riders wanting to spend more time on the bike and less time fixing puncturesPeaty's Tubeless Conversion kits are beautifully laid out with easy to follow setup instructions. These conversion kits are available in a variety of configurations so that you can ride with the perfect tubeless set up whatever your discipline: Road, Gravel, XC, Enduro, Downhill all good to go. Every conversion kit features a handy installation guide on the box, with QR links to step by step installation for each stage of installation rest assured that the installation process will be slick and swift.Available in 4 flavours:Road/Gravel: 21mm tape / 60mm valves / 120ml SealantXC/Trail: 25mm tape / 42mm valves / 240ml SealantDH/Enduro: 30mm tape / 42mm valves / 240ml SealantDH Wide: 35mm tape / 42mm valves / 240ml Sealant
Peaty s Tubeless Conversion Kit includes everything you need to run a fully optimised tubeless setup Peaty s Rim Tape, MK2 Tubeless Valves and Holeshot Sealant. If you value more time spent on the bike and less time fixing punctures, this is the perfect set up.Includes Peaty's latest silver-printed Tubeless Rim TapeBlack MK2 Tubeless Valves and Holeshot Biofibre Tubeless SealantPresented in specially-designed recycled packaging with a handy setup guide on the box and QR links to step by step videos for each stage of installationIdeal for riders wanting to spend more time on the bike and less time fixing puncturesPeaty's Tubeless Conversion kits are beautifully laid out with easy to follow setup instructions. These conversion kits are available in a variety of configurations so that you can ride with the perfect tubeless set up whatever your discipline: Road, Gravel, XC, Enduro, Downhill all good to go. Every conversion kit features a handy installation guide on the box, with QR links to step by step installation for each stage of installation rest assured that the installation process will be slick and swift.Available in 4 flavours:Road/Gravel: 21mm tape / 60mm valves / 120ml SealantXC/Trail: 25mm tape / 42mm valves / 240ml SealantDH/Enduro: 30mm tape / 42mm valves / 240ml SealantDH Wide: 35mm tape / 42mm valves / 240ml Sealant