Ideal for use on carbon fibre handlebars, stems and seat posts, the carbon assembly paste is a specially formulated blend of highly refined natural oils and ultra-fine non-slip pumice particles, designed to eliminate slip between carbon fibre components. Gripper paste increases the friction between carbon fibre components and their mating surfaces, so reducing the torque required to clamp them. The non-toxic formula is also resistant to detergents and washout to give you long-lasting performance in the harshest conditions.For use on carbon fibre handlebars, stems & seat postsEliminates slip on clamped parts & Prevents seizingMade of renewable, natural oils and pumice particlesReadily Biodegradable100% PCR & PIR Recycled PackagingM15 threaded cap
Do you love the standard Peaty's LinkLube All-Weather but want it to run even cleaner, smoother, quieter and last 30% longer LinkLube All-Weather Premium is the lube you've been waiting for!Cleaner, Smoother, Quieter & 30% longer lastingDesigned for the longest rides in mixed conditionsMint scent matches the much loved All Weather Standard LubePremium gold print ads an exclusive touch to a more premium lubesAvailable in 60ml and 120mlFor use in all conditions, LinkLube All-Weather uses the same scientific approach as our much loved LinkLube All-Weather but dials the quality of the ingredients up to 11. With the same chain-cleaning properties as our standard All-Weather Lube, the milk-white LinkLube Premium penetrates deep inside the chain and replaces moisture, grit & grime with a long-lasting blend of oils, waxes and non-toxic Nano particles.All-Weather Premium has been ridden over thousands of miles of testing and development over the last couple of years by our Motley crew of riders and product testers. Over these miles of real-world testing, they have found on average, it lasted 30% longer in the same conditions as would standard All-Weather Lube. Through the first wave of lockdown, Paralympian Steve Bate was using the latest formulation back comparing it to our standard LinkLube All-Weather. During his Epic 1000 mile turbo trainer ride over ten days, the result showed that All-Weather Premium lasted a massive 500 miles before wearing out. In comparison LinkLube All-Weather Standard lasted 380 miles in the same controlled conditions showing a 31.5% increase in durability.
Everyone knows that a straight line is the fastest line! That's why Peaty's made their Holeshot CO2 tyre inflator straight, rather than bent at 90 degrees. This straight line design enables faster airflow for rapid inflation and creates less stress on your tubeless valves when you're using it because you're coming at the valve straight on rather than at a 90 degree angle.Available in 12x Chris King coloursUnique Patent Pending compact straight line design for maximum airflowSimply push down to inflateUnique closed base silicone Freeze protector sleeve prevents your hands from freezing, even without glovesEach kit contains 1x inflator head, 2x CO2 cartridges and 1x freeze protector sleeveIt's as small and lightweight as possible, so it's easy to carry in your pocket, bag or strapped to your bikeMade from CNC'd 6061 aluminium, and with a patent pending valve design, the details of Peaty's inflator heads have been agonised on - from the exact rubber compound of the O-rings to the awesome Chris King anodized colours. Not stopping at the inflator head, Peaty's applied the same level of detail and quality in making a high quality CO2 cartridge sleeve. far from a cheap strip of neoprene, our freeze protector sleeve is made from temperature resistant silicone and has a unique closed base to stop your hand from freezing to the cartridge, no matter how you hold it - even without wearing gloves.
Everyone knows that a straight line is the fastest line! That's why Peaty's made their Holeshot CO2 tyre inflator straight, rather than bent at 90 degrees. This straight line design enables faster airflow for rapid inflation and creates less stress on your tubeless valves when you're using it because you're coming at the valve straight on rather than at a 90 degree angle.Available in 12x Chris King coloursUnique Patent Pending compact straight line design for maximum airflowSimply push down to inflateUnique closed base silicone Freeze protector sleeve prevents your hands from freezing, even without glovesEach kit contains 1x inflator head, 2x CO2 cartridges and 1x freeze protector sleeveIt's as small and lightweight as possible, so it's easy to carry in your pocket, bag or strapped to your bike. Made from CNC'd 6061 aluminium, and with a patent pending valve design, the details of Peaty's inflator heads have been agonised on - from the exact rubber compound of the O-rings to the awesome Chris king anodized colours.Not stopping at the inflator head, Peaty's applied the same level of detail and quality in making a high quality CO2 cartridge sleeve. far from a cheap strip of neoprene, our freeze protector sleeve is made from temperature resistant silicone and has a unique closed base to stop your hand from freezing to the cartridge, no matter how you hold it - even without wearing gloves.
Designed in conjunction with Chris King, Peaty's MK2 Tubeless Valves are made from premium lightweight, high strength 7075 aluminium, and fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims.Lightweight & durable 7050 aluminium constructionColoured to match Chris King componentsSlotted base compatible with or without tyre insertsValve caps double as 3.4mm spoke key and valve core removal toolThe unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, the MK2 valves have a straight-through design so there's no reduction of sealant or air flow when tyre inserts are not used.Fitting couldn't be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal. Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails.
Designed in conjunction with Chris King, Peaty's MK2 Tubeless Valves are made from premium lightweight, high strength 7075 aluminium, and fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims.Lightweight & durable 7050 aluminium constructionColoured to match Chris King componentsSlotted base compatible with or without tyre insertsValve caps double as 3.4mm spoke key and valve core removal toolThe unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, the MK2 valves have a straight-through design so there's no reduction of sealant or air flow when tyre inserts are not used.Fitting couldn't be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal. Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails.
Designed in conjunction with Chris King, Peaty's MK2 Tubeless Valves are made from premium lightweight, high strength 7075 aluminium, and fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims.Lightweight & durable 7050 aluminium constructionColoured to match Chris King componentsSlotted base compatible with or without tyre insertsValve caps double as 3.4mm spoke key and valve core removal toolThe unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, the MK2 valves have a straight-through design so there's no reduction of sealant or air flow when tyre inserts are not used.Fitting couldn't be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal. Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails.
Designed in conjunction with Chris King, Peaty's MK2 Tubeless Valves are made from premium lightweight, high strength 7075 aluminium, and fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims.Lightweight & durable 7050 aluminium constructionColoured to match Chris King componentsSlotted base compatible with or without tyre insertsValve caps double as 3.4mm spoke key and valve core removal toolThe unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, the MK2 valves have a straight-through design so there's no reduction of sealant or air flow when tyre inserts are not used.Fitting couldn't be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal. Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails.
Whether you've lost a valve cap or just want to bling your existing pair of Peaty's valves, this kit gives you everything you need. Compatible with all Peaty's Tubeless Valves. Includes: 1x spoke key cap (for 3.4mm spoke nipple), 1x valve core remover cap & 2x lock rings.
Peaty's XXX Solvent Degreaser is a powerful, max strength, water-soluble and readily biodegradable solvent degreaser and de-waxer, designed for complete removal of bearing greases, waxes, oils and bitumen & tar stains. For use on metallic surfaces but also safe for use on carbon fibre and many other plastics and painted surfaces. The 400ml aerosol is short and girthy to fit easier into your toolbox, while the coloured identifier rings help you quickly find the can you want amongst the stack of aerosol cans you already have. If you want to degrease your bike in a hurry, Peaty's XXX Solvent is the only choice!
Peaty's Road Tubeless Conversion Kit includes everything you need to run a fully optimised tubeless setup with Peaty's RimJob Rim Tape, Tubeless Valves and Sealant. If you value more time spent on the bike and less time fixing punctures, this is the perfect set up.Easily convert your wheels and tyres to tubelessValves include caps which double as spoke key and valve core toolIncludes: 1x 120ml Tubeless Sealant pouches, 2x 60mm Tubeless Valves and 1x 9m roll of RimJob Rim Tape (21mm wide)Not just a few bits thrown carelessly in a bag! Peaty's Tubeless Conversion kits are beautifully laid out with easy to follow setup instructions. These conversion kits mean you can ride with the perfect tubeless set up quickly and easily, with QR links to step by step YouTube videos for each stage of installation on the packaging. Rest assured that the installation process will be slick and swift and you can enjoy puncture free riding in no time!
Peaty's MTB Tubeless Conversion Kit includes everything you need to run a fully optimised tubeless setup with Peaty's RimJob Rim Tape, Tubeless Valves and Sealant. If you value more time spent on the bike and less time fixing punctures, this is the perfect set up.Easily convert your wheels and tyres to tubelessValves include caps which double as spoke key and valve core toolIncludes: 2x 120ml Tubeless Sealant pouches, 2x 60mm Tubeless Valves and 1x 9m roll of RimJob Rim TapeNot just a few bits thrown carelessly in a bag! Peaty's Tubeless Conversion kits are beautifully laid out with easy to follow setup instructions. These conversion kits mean you can ride with the perfect tubeless set up quickly and easily, with QR links to step by step YouTube videos for each stage of installation on the packaging. Rest assured that the installation process will be slick and swift and you can enjoy puncture free riding in no time!