The Park Tool CCP-44 is specifically designed to remove crank arms from splined Shimano® Octalink and ISIS Drive® bottom bracket spindles that do not use a self-extracting system.
Park Tool Crank Puller (CCP-22)With its long handle and the finely threaded head, the CCP-22 crank arm removal tool quickly attaches and gives you the advantage you need for removing stubborn crank arms. Park Tool has made it to be compatible with a wide range of models, making it ideal for home mechanics and professional mechanics alike.Features:Fits all cranks using 22mm x 1 threads and square, tapered bottom bracket spindles Also fits "Power Spline" cranks from SRAM using the 8mm thread bolt The strong rotating tip system ensures smooth operation and long lifeNOTE: For cranks using the ISIS Drive or Octalink system, look for the CCP-44 or the CWP-7 models.Buy Park Tool Workshop Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Crank Puller (CCP-44)With its long handle and fine thread to engage fully with compatible cranksets, the CCP-44 Crank Puller gives you the grip and control for removing even the most stubborn crank arms. Park Tool has made this easy to use pulling tool compatible with a wide range of Shimano Octalink and FSA ISIS Drive models.Features: Specifically designed to remove crank arms from splined Shimano® Octalink and ISIS Drive® bottom bracket spindles that do not use a "self-extracting" system22 x 1mm fine thread provides leverage needed to remove tight crank armsStrong rotating tip system ensures smooth operation and long life Not suitable for use with square taper type cranksetsBuy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
The universal design of the Park Tool crank puller has a rotating tip pressed into each end of the tool (11.3mm and 16.3mm) so it will remove both square taper and splined (ISIS Drive™, Octalink®) crank arms. Also fits BNI cranks on Bosch® electric bikes (E-Bikes). The CWP-7 is made for the 22 x 1mm threading in common cranks.
The CCP-4 Crank Puller is specifically designed to remove crank arms from splined Shimano Octalink and ISIS Drive bottom bracket spindles that do not use a One Key Release systemIt uses a long comfortable handle and a fine thread for the leverage needed to remove tight crank armsUnique rotating tip design has been updated over the CCP-4 and ensures even smoother operation and longer lifeNote: The CCP-44 will not work on crank arms that fit standard square tapered bottom bracket spindles
Perfect headset performance requires accurate machining of the fork crown race and this is the tool to do itCuts the outer edge and lower surface of the crown race seatA simple adjusting system allows the tool to be a tight fit on all forks threaded or unthreaded including those with externally butted steerer tubesIncludes high speed steel cutters and adjustable collets sufficient to cut 26.5 mm or 27.1 mm crown race seats on 1 inch forks and 30.1 mm crown race seat on 1-1/8inch forks
Adaptor for the Park CRC-1 that allows the quick and perfect facing of 1.5' / 39.8 mm standard crown racesDesigned for use on tapered steerer forksGrub screws lock adaptor and cutter in place for easy useIncludes precision ground crown race cutterFor best results use plenty of Park CF-2 cutting fluid
Use with any 3/8 inch drive torque wrench to verify pedals are torqued to the correct specLaser cut heat treated and plated for long lifeMade in the USA and covered by Park's legendary limited lifetime warranty
Perfect headset performance requires accurate machining of the fork crown race and this is the tool to do itCuts the outer edge and lower surface of the crown race seatA simple adjusting system allows the tool to be a tight fit on all forks threaded or unthreaded including those with externally butted steerer tubesIncludes high speed steel cutters and adjustable collets sufficient to cut 26.5 mm or 27.1 mm crown race seats on 1 inch forks and 30.1 mm crown race seat on 1-1/8inch forks
Park Tool Crown Race Setting System (CRS-15.2)Designed for the fitting of bearing races for 1.5" and 1-1/4" forks, the Crown Race Setting System CRS-15.2 allows you to do so in an easy, damage-free manner. Safe and Accurate Race Seating The system utilises two different insert rings and a further aluminium insert to ensure there is no direct contact with your bearing's surface as you lightly hammer the tube's end cap to seat the race firmly and properly in place. Including an extension that will allow you to work on fork steering tubes up to 425mm, the Crown Race Setting System CRS-15.2 will allow you to fit your races safely and accurately. Features: Material: Aluminium SHIS Terminology: CRS-15 services crown races in SHIS 33 and 40. Compatible Bearing Races: 1.5", 1-1/4" Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Crown Race Setting System - CRSAs a manufacturer of bicycle specific tools since 1963 you can safely rely on Park Tools' many years of experience. The world's largest bike tool manufacturer is the first choice of professional and home bicycle mechanics around the world.Features: Precision installation tool specifically designed for setting headset crown races Accurately places the crown race whilst distributing the impact evenly and without damage to the bearing surface Safer, more accurate alignment and easier to use than traditional slide hammersBuy Park Tool Workshop Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.
The world's largest bike tool manufacturer is the first choice of professional and home bicycle mechanics around the world.