Park Tool Preset Torque Driver PTD-6This shop quality pre-set torque driver limits torque applied to fasteners, preventing over-tightening and damage to lightweight components. The PTD-6 features all metal internal construction with a comfortable, ergonomic composite moulded grip. Each tool is assembled and calibrated at The Park Tool factory in Minnesota. Features: Pre-set to 6 Nm ¼ inch hex drive Includes 3, 4, 5mm and T25 bits stored in the handle Limits torque applied to fasteners while rotating clockwise All metal internal construction for long lifeBuy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Cable & Housing Cutter (CN-10)The CN-10 Cable and Housing Cutter from Park Tool has been designed to cut through bicycle cables and housing with ease. A firm favourite from Park Tool, this is an essential no-nonsense maintenance tool that every cycling enthusiast needs in their kit. Features:Strong, durable steel handlesPrecision ground cutting jaws for a clean cutBuilt-in crimper for cable end caps and forming hole for reforming housing ends and housing ferrulesWire latch holds handles together when not in useUse: Bicycle cables and housingBuy Park Tool Workshop Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Oversized Adjustable Saw Guide SG-7.2 Accurately guides a hacksaw to cut aero-shaped seat masts and seat posts up to 2.75"" (70mm), as well as fork steerer tubes and other round tubes from 1-1/16"" to 1-3/4"" (27mm to 45mm). The SG-7.2 features two different cutting slots — standard and carbon cutting blade widths — in a hardened steel body with moulded contact points to protect tubes and frames.Features: The SG-7.2 cutting guide is a specially shaped guide, designed specifically to accept aero-shaped seatmasts and seatposts up to 3.5 inches (89 mm) deep The guide can also accept round tubes from 1-1/4 inch to 1-3/4 inch (32 mm to 45 mm) in diameter Two cutting slots are provided, one for standard saw blades and one for thicker, carbon specific blades Hardened steel body with moulded contact points to protect tubes and frames Made in the USA and covered by Park Tool's legendary limited lifetime warrantyBuy Park Tool Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.
The RT-2 is specially designed for removing 1-1/4 and 1.5 inch head cupsThe flared end fits through the head tube and snaps behind the cup allowing the cup to be removed with a tap of a hammerDurable heat treated alloy steel with nickel finish for long lifeThe new RT-2 does not replace the RT-1 Head Cup Remover although similar in appearance the two tools are designed to work on different size head cupsAlso suitable for may motorcycle headtubes
Park Tool Socket and Bit Set (SBS-1.2)Coming with all the common sized tool heads for getting the job done, Park Tool has created its SBS-1.2 18-piece Socket and Bit Set from a strong and hard-wearing steel so you can rely on it for many years to come. This bike-specific kit also comes in a convenient plastic tray so you can keep all the pieces organised and held together in your toolbox drawer.Features: Material: Chrome Vanadium Steel 3, 4, 5, 6, 8 and 10mm hex bits Long Reach 5 and 6mm hex bits Long Reach T25, T30 and T40 Torx style bits 8, 9, 10, 13, 14, 15mm and 1" sockets (The 1" socket fits various Park Tool Freewheel, Cassette Lockring, and Bottom Bracket tools) Convenient bit and socket holder tray included All sockets and bits are 3/8" drive Sockets Available To Purchase Separately: YesBuy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Bottom Bracket Bearing Tool Set BBT-30.4Install and extract bottom bracket bearings with this Bottom Bracket Tool Set from Park Tool. This set includes everything required to easily tackle bottom bracket bearings in a range of bracket systems. Efficient Bottom Bracket Bearing RemovalComprised of a bottom bracket bearing remover and two bushings for fitting new bearings, the Bottom Bracket Bearing Tool Set BBT-30.4 is suitable for removing and replacing BB30, PressFit 30 (PF30), 386EVO, BBright and PF121 systems. To remove the bearing, the remover is fed through the shell until the flat head goes into the opposite side bearing. Once engaged, the tool's plastic guide will fit into the near-side shell opening to hold the tool steady while you tap the handle end firmly with a hammer, until the bearing pops out. To install new bearings, the bundled bushings are used with a head cup press (not included) to quickly and accurately press the bearings into the shell.This updated take on the BBT-30.3 features additional length to work with wider fat bottom bracket shells, making the Bottom Bracket Bearing Tool Set BBT-30.4 a great addition to any garage or workshop.Features: Compatibility: BB30, PressFit 30 (PF30), 386EVO, BBright and PF121 bottom bracket systems Included parts: Extra-long bottom bracket bearing remover, 2 x bushings for use with head cup press (sold separately)Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Axle & Spindle AV-5 Vice InsertThe ideal vice tool to have in your workshop, this Axle & Spindle Vice Insert helps add control to your workbench vice when carrying out repairs on your bike. Easy to Fit, Magnetic Vice Accessory Equipped with nine standard jaw openings for holding a range of spindle and axle sizes steady, this precision extruded aluminium insert connects to your vice via its magnetic Mini V-block design which provides a strong, non-slip bond and retainer legs for further stability. Also compatible with all Park Tool Freewheel Remover/Lockring Tools, the Axle & Spindle Vice Insert AV-5 is an essential repair tool for any workbench. Features: Material: Precision Extruded Aluminium Jaw Openings: Nine - 5, 9, 10, 12, 14, 20, 25, 30, and 36 mm (including one suitable for holding Hydraulic Tubing) Compatibility: Park Tool Freewheel Remover/Lockring Tool Attachment: Magnetic Mini V-BlockBuy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Key Features:The MT-40 is a high quality, folding take-along tool.Features forged aluminum side plates.Hardened and plated tools.Smooth ergonomic operation.2.5, 3, 4, 5, 6 and 8mm hex wrenches.T25 & T30 Torx® compatible driver.Combo cross/straight tip screwdriver.CO2 cartridge inflator adapter.Key ring holder.243 grams.
Now you can pick up the KP 22 Knee Pads and the EP 55 Elbow Pads together in a lightweight mesh backpack.
Description for Mankind International Park Handlebar Ed Black / 9.2" Rise not available
The Park Tool FAG2 Frame Alignment Gauge helps solve the problem of many bicycles not shifting or tracking properly. This can be the result of the front and rear wheels not being in line with the frame. If these conditions still exist after wheel and derailleur adjustments, the seat stays, chain stays, and rear drop-outs of the frame may be misaligned. For years the accepted method to check the alignment of the rear drop-out was to run a string on either side. This method does work to some extent. However, it is not accurate because the measurement is not taken at the drop-out. With the Park Tool Frame Alignment Gauge the alignment can be checked quickly and accurately at the drop-out. Retractable pointer to fit all sizes and types of bicycles.
Park Tool Headcup Remover (RT-1)Offering you an efficient and easy way to remove your bike’s pressed in headset cups, the RT-1 just needs a firm impact with your mallet or hammer on its head and the flared ends will accurately extract the cup from the frame. Park Tool has also made this versatile tool compatible with Pressfit 30 (PF30) and SRAM DUB press-fit bottom bracket cups, making it the ideal addition to any professional or home mechanics range of tools.Features:Material: Strong, heat-treated alloy steel with nickel finishCompatibility: Fits 1", 1.1/8" and 1.1/4" headsetsNominal outer diameter of shaft is 1" (25.4mm)For use on 27-38mm (1" to 1.1/2") bearing racesAlso removes PressFit 30 (PF30) bottom bracket units (PressFit 30 inside diameter is the same as headset cups, and are pressed in the same manner)Also easily removes cups on one-piece cranksAlso removes SRAM DUB non-threaded pressed in bottom brackets as well as other PressFit 30 (PF30) systemsFor the 1.1/4 inch and 1.1/2 inch headset standards see the RT-2 model (sold separately)Buy Park Tool Workshop Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.