Oversized centre hole and thin wall design allows use without removal of cones and locknuts Oversized centre hole and thin wall design allows use without removal of cones and locknuts Investment cast and heat-treated for strength and durability 1' base fits end of SR-1 FRW-1 Park tools or simply an adjustable wrench or bench vice Fits most four notch BMX freewheels including hubs with 14mm oversize axles Made in the USA and covered by Park Tool's legendary limited lifetime warranty
Key Features:Part of a comprehensive range of freewheel removal tools.12 splines, 22.6mm diameter. Fits Shimano, Sachs Aris, SunRace, DNP Epoch and other 5-10 speed freewheels.The FR-1.3 includes an enlarged thru-hole to accommodate 14mm axles.
The Park Tool FR2C Freewheel Remover is a heat treated alloy steel product with a one inch base to fit wrenches or a bench vice. Thin wall construction allows use without removal of cones and locknuts and fits Sun Tour two-notch freewheels. Not recommended for Sun Tour four to six notch freewheels.
The Park Tool FR3C Freewheel Remover is a heat treated alloy steel product with a one inch base to fit wrenches or a bench vice. Thin wall construction allows use without removal of cones and locknuts and fits all Sun Tour four-notch freewheels since 1986.
Part of a comprehensive range of freewheel removal toolsOversized centre hole and thin wall design allows use without removal of cones and locknutsInvestment cast and heat-treated for strength and durabilityOne-inch base fits end of SR-1, FRW-1 Park tools or simply an adjustable wrench or bench viceFits Sun Tour four notch freewheels
Part of a comprehensive range of freewheel removal toolsOversized centre hole and thin wall design allows use without removal of cones and locknutsInvestment cast and heat-treated for strength and durabilityOne-inch base fits end of SR-1, FRW-1 Park tools or simply an adjustable wrench or bench viceFits most four notch BMX freewheels including hubs with 14 mm oversize axles
The Park Tool FR7C Freewheel Remover is a heat treated alloy steel product with a one inch base to fit wrenches or a bench vice. Thin wall construction allows use without removal of cones and locknuts and fits Falcon freewheels.
The Park Tool FR8C Freewheel Remover is a heat treated alloy steel product with a one inch base to fit wrenches or a bench vice. Thin wall construction allows use without removal of cones and locknuts and removes four notch freewheels from flip-flop BMX hubs with 30 x 1mm threads.
Park Tool Freewheel Remover (FR-1.3) The Freewheel Remover FR-1.3 is another well-crafted tool from Park Tool, designed for the efficient and easy removal and installation of the most common thread-on 12-spline 5-10-speed freewheels. Simple Freewheel Removal and Fitting Fitting perfectly on to your axle, the FR-1.3 makes light work of fastening or loosening your freewheel for quick and easy removal and replacement. Compatible with a wide range of freewheels, this Park Tool device features an enlarged thru-hole, capable of accepting wheels with axles up to 14mm diameters, including E-Bike wheels. The 1" hexagonal end of the FR-1.3 makes it easily compatible with most wrenches and bench vices for additional leverage and support. Features: Compatibility: Shimano, Sachs Aris, Sun Race, DNP Epoch and other 5-10-speed freewheels Size: 22.6 mm Diameter + 1" Hexagonal Head Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Freewheel Remover Tool - FRHeat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts.Fits Suntour 2 Pin (FR-2): Fits older Sun Tour two notch freewheels Two notches are approximately 25mm across measured outside to outside Always use a skewer or axle nut to hold remover firmly in placeFits Atom - Regina -Zeus (FR-4): Fits Atom, Regina, splined Zeus, and some Schwinn Approved freewheels The FR-4 has 20 splines and is approximately 21.6mm in diameter Always use a skewer or axle nut to hold remover firmly in placeFits BMX 4-Pin (FR-6): Removes four-notch BMX / single-speed freewheel from hubs with 1.37 x 24 TPI threads The FR-6 has four notches approximately 32mm across measured inside to inside and 40mm outside to outside Fits over axles up to 16mm thread diameter Always hold the remover secure to the hub using axle nut or quick release skewer.NOTE: The Sun Tour four notch freewheels do not accept the FR-2 remover. Buy Park Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.
FR-2 Features: Fits older Sun Tour® two notch freewheels Two notches are approximately 25mm across measured outside to outside Always use a skewer or axle nut to hold remover firmly in place FR-4 Features: Fits Atom®, Regina®, splined Zeus®, and some Schwinn®-approved freewheels The FR-4 has 20 splines and is approximately 21.6mm in diameter Center bore for axle clearance is 10mm Always use a skewer or axle nut to hold tool firmly in place during removal FR-6 Features: Removes four-notch BMX / single-speed freewheel from hubs with 1.37 x 24 TPI threads The FR-6 has four notches approximately 32mm across measured inside to inside and 40mm outside to outside Fits over axles up to 16mm thread diameter Always use a skewer or axle nut to hold tool firmly in place during removal
Park Tool Freewheel Remover Wrench FRW-1The FRW-1 is a one-inch socket and securely holds freewheel and lockring tools (FR-1 through FR-8 plus the BBT-5/FR-11) for removal and installation. Features an investment cast head with locking setscrew and a long, round, vinyl-dipped handle for superior leverage.Features: One inch socket Securely holds freewheel Investment cast head Lone, round, vinyl dipped handle Note: Always use a skewer or axle nut to hold a cassette/freewheel tool in place during removalBuy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.