This shop quality chain whip gives you incredible leverage without worry of slippage, and the head is uniquely shaped to allow quick and accurate access to any cassette or freewheel.Works on 5-speed to 12-speed mountain and road bike cassettes and freewheelHardened bolts hold securely and make chain replacement easyHeavy duty, heat treated headRound vinyl coated handleThe SR-2.3 is approximately 15" long (38cm)
The tool is pulled through the frame until the flared ends snap in behind the cup. A blow on the tool head removes the cup.
The Universal Head Cup Remover will also remove the PressFit 30 (PF30) bottom bracket units. The PressFit 30 inside diameter is the same as headset cups, and are pressed in the same manner.
FR-2 Features: Fits older Sun Tour® two notch freewheels Two notches are approximately 25mm across measured outside to outside Always use a skewer or axle nut to hold remover firmly in place FR-4 Features: Fits Atom®, Regina®, splined Zeus®, and some Schwinn®-approved freewheels The FR-4 has 20 splines and is approximately 21.6mm in diameter Center bore for axle clearance is 10mm Always use a skewer or axle nut to hold tool firmly in place during removal FR-6 Features: Removes four-notch BMX / single-speed freewheel from hubs with 1.37 x 24 TPI threads The FR-6 has four notches approximately 32mm across measured inside to inside and 40mm outside to outside Fits over axles up to 16mm thread diameter Always use a skewer or axle nut to hold tool firmly in place during removal
A great way to hold small parts, tools and components during a repair, the OM-1 features multiple small pockets and one large work area. Perfect for suspension work or to organize parts for installation.
With two different insert rings and an aluminium insert preventing any direct contact with your bearing's surface, the Oversized Crown Race Setting System CRS-15.2 allows you to gently tap the end cap to fix the race firmly and accurately in place. Bundled with an extension for working on fork steering tubes up to 425mm, this is a great bit of kit making sure your races are set correctly.
The SG-7.2 features two different cutting slots — standard and carbon cutting blade widths — in a hardened steel body with moulded contact points to protect tubes and frames.
Park Tool Benchtop Overhaul Mat (OM-1)Designed for arranging parts in the workshop, this Benchtop Overhaul Mat from Park Tool benefits from one work area alongside seven pockets, ideal for storing small parts and tools. Features:Material: Made from a rubber-like PVC7 compartments for small partsCleans easily and looks great on any benchDimensions: 38cm x 18cmPlease Note: Parts shown are for illustration purposes only.Buy Park Tool Bench-Top Overhaul Mat - OM-1 from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Headcup Remover (RT-1)Offering you an efficient and easy way to remove your bike’s pressed in headset cups, the RT-1 just needs a firm impact with your mallet or hammer on its head and the flared ends will accurately extract the cup from the frame. Park Tool has also made this versatile tool compatible with Pressfit 30 (PF30) and SRAM DUB press-fit bottom bracket cups, making it the ideal addition to any professional or home mechanics range of tools.Features:Material: Strong, heat-treated alloy steel with nickel finishCompatibility: Fits 1", 1.1/8" and 1.1/4" headsetsNominal outer diameter of shaft is 1" (25.4mm)For use on 27-38mm (1" to 1.1/2") bearing racesAlso removes PressFit 30 (PF30) bottom bracket units (PressFit 30 inside diameter is the same as headset cups, and are pressed in the same manner)Also easily removes cups on one-piece cranksAlso removes SRAM DUB non-threaded pressed in bottom brackets as well as other PressFit 30 (PF30) systemsFor the 1.1/4 inch and 1.1/2 inch headset standards see the RT-2 model (sold separately)Buy Park Tool Workshop Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Headcup Remover (RT-1)Offering you an efficient and easy way to remove your bike’s pressed in headset cups, the RT-1 just needs a firm impact with your mallet or hammer on its head and the flared ends will accurately extract the cup from the frame. Park Tool has also made this versatile tool compatible with Pressfit 30 (PF30) and SRAM DUB press-fit bottom bracket cups, making it the ideal addition to any professional or home mechanics range of tools.Features:Material: Strong, heat-treated alloy steel with nickel finishCompatibility: Fits 1", 1.1/8" and 1.1/4" headsetsNominal outer diameter of shaft is 1" (25.4mm)For use on 27-38mm (1" to 1.1/2") bearing racesAlso removes PressFit 30 (PF30) bottom bracket units (PressFit 30 inside diameter is the same as headset cups, and are pressed in the same manner)Also easily removes cups on one-piece cranksAlso removes SRAM DUB non-threaded pressed in bottom brackets as well as other PressFit 30 (PF30) systemsFor the 1.1/4 inch and 1.1/2 inch headset standards see the RT-2 model (sold separately)Buy Park Tool Workshop Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Freewheel Remover Tool - FRHeat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts.Fits Suntour 2 Pin (FR-2): Fits older Sun Tour two notch freewheels Two notches are approximately 25mm across measured outside to outside Always use a skewer or axle nut to hold remover firmly in placeFits Atom - Regina -Zeus (FR-4): Fits Atom, Regina, splined Zeus, and some Schwinn Approved freewheels The FR-4 has 20 splines and is approximately 21.6mm in diameter Always use a skewer or axle nut to hold remover firmly in placeFits BMX 4-Pin (FR-6): Removes four-notch BMX / single-speed freewheel from hubs with 1.37 x 24 TPI threads The FR-6 has four notches approximately 32mm across measured inside to inside and 40mm outside to outside Fits over axles up to 16mm thread diameter Always hold the remover secure to the hub using axle nut or quick release skewer.NOTE: The Sun Tour four notch freewheels do not accept the FR-2 remover. Buy Park Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Sprocket Remover / Chain Whip (SR-18.2)If you regularly work on single speed bikes, the SR-18.2 Sprocket Remover and Chain Whip is the ideal tool for making your rear wheel repair jobs easier. Professional bike tool experts Park Tool have made the handle from heat-treated material and added a moulded handle for extra hand comfort.Durable Chain WhipHeat treated to make sure the tool won't bend or flex, this tough bike tool has a moulded handle for optimum comfort when loosening and tightening. The chain part of the tool features hardened pins to keep it firmly in place when latched to the sprocket, while the 1" box-end wrench will fit Park Tool freewheel and cassette Lockring Tools to make removal that bit easier. This is a hard-wearing maintenance must-have for any workshop or toolkit.Features: Material: Heat Treated Metal, moulded Plastic handle Compatibility: 1/8" fixed gear sprockets and single speed cassettesWorks on 1/8" fixed gear sprockets and single speed cassettes1" (25.4mm) box-end wrench fits Park Tool freewheel/cassette lockring toolsFeatures hardened pins to keep the chain in place Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.