DVO Suspension Diamond D1 Boost Fork 27.5" 44mm OffsetMade with quality, hard-wearing materials and top-level suspension technology, this enduro-centric fork by DVO is boldly built for exhilarating downhill adventures. Constructed from aluminium, with magnesium-cast lowers, it provides every ride with 180mm of terrain-taming travel, as well as an array of adjustments to keep you upright and unrivalled from top to bottom. Boost-Sized, Aluminium-Built MTB ForkUsing a combination of six low-speed compression adjustments and 24 high-speed clicks, fine-tuning every ride to your preferred smoothness is made easy, as an OTT (Off The Top) adjustment system on the negative air spring improves control and sensitivity over smaller bumps. Equipped with a closed cartridge bladder damper and a Boost-sized thru axle, the Diamond D1 gives you enhanced rigidity and responsiveness over the most challenging runs, making it the ultimate trail-blazing fork for the downhill dynamo. Features: Steerer Material: Aluminium Crown Material: Forged Aluminium Stanchion Material: Aluminium, 35mm Lower Material: Magnesium casting Suspension: Air, OTT adjustment (negative spring preload) Damping: Closed cartridge bladder system Steerer Diameter: 1 1/8-1.5", tapered Adjustments: High-speed and low-speed compression, rebound, OTT, air pressure Axle to Crown: 565mm Travel: 180mm Axle: 15x110mm Boost thru axle (bolted) Offset: 44mm Buy DVO Suspension Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
DVO Suspension Diamond D1 Boost Fork 27.5" 37mm OffsetDesigned with superb suspension technology and top-notch materials, this excellent enduro fork by DVO is the perfect companion for daring downhill endeavours. Made with an aluminium chassis and magnesium-cast lowers, it takes on every trail with 170mm of travel and an assortment of adjustments to keep you composed and in control from top to bottom. Boost-Sized, Downhill MTB ForkCombining six low-speed and 24 high-speed clicks of compression adjustment, the Diamond D1 lets you fine-tune every ride to meet the demands of the route ahead. An OTT (Off The Top) adjustment system on the negative air spring enhances control and composure over smaller bumps while the closed cartridge bladder damper and shim stack-controlled damper absorb bigger shocks. A Boost-sized thru axle gives rigidity and responsiveness when your run gets more rugged, making for a performance-focused fork for the thrill-seeking rider. Features: Steerer Material: Aluminium Crown Material: Forged Aluminium Stanchion Material: Aluminium, 35mm Lower Material: Magnesium casting Suspension: Air, OTT adjustment (negative spring preload) Damping: Closed cartridge bladder system Steerer Diameter: 1 1/8-1.5", tapered Adjustments: High-speed and low-speed compression, rebound, OTT, air pressure Axle to Crown: 565mm Travel: 170mm Axle: 15x110mm Boost thru axle (bolted) Offset: 37mm Buy DVO Suspension Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
DVO Suspension Diamond D1 Boost Fork 27.5" 37mm OffsetDesigned with superb suspension technology and top-notch materials, this excellent enduro fork by DVO is the perfect companion for daring downhill endeavours. Made with an aluminium chassis and magnesium-cast lowers, it takes on every trail with 170mm of travel and an assortment of adjustments to keep you composed and in control from top to bottom. Boost-Sized, Downhill MTB ForkCombining six low-speed and 24 high-speed clicks of compression adjustment, the Diamond D1 lets you fine-tune every ride to meet the demands of the route ahead. An OTT (Off The Top) adjustment system on the negative air spring enhances control and composure over smaller bumps while the closed cartridge bladder damper and shim stack-controlled damper absorb bigger shocks. A Boost-sized thru axle gives rigidity and responsiveness when your run gets more rugged, making for a performance-focused fork for the thrill-seeking rider. Features: Steerer Material: Aluminium Crown Material: Forged Aluminium Stanchion Material: Aluminium, 35mm Lower Material: Magnesium casting Suspension: Air, OTT adjustment (negative spring preload) Damping: Closed cartridge bladder system Steerer Diameter: 1 1/8-1.5", tapered Adjustments: High-speed and low-speed compression, rebound, OTT, air pressure Axle to Crown: 565mm Travel: 170mm Axle: 15x110mm Boost thru axle (bolted) Offset: 37mm Buy DVO Suspension Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
DVO Suspension Diamond D1 Boost Fork 27.5" 37mm OffsetDesigned with superb suspension technology and top-notch materials, this excellent enduro fork by DVO is the perfect companion for daring downhill endeavours. Made with an aluminium chassis and magnesium-cast lowers, it takes on every trail with 170mm of travel and an assortment of adjustments to keep you composed and in control from top to bottom. Boost-Sized, Downhill MTB ForkCombining six low-speed and 24 high-speed clicks of compression adjustment, the Diamond D1 lets you fine-tune every ride to meet the demands of the route ahead. An OTT (Off The Top) adjustment system on the negative air spring enhances control and composure over smaller bumps while the closed cartridge bladder damper and shim stack-controlled damper absorb bigger shocks. A Boost-sized thru axle gives rigidity and responsiveness when your run gets more rugged, making for a performance-focused fork for the thrill-seeking rider. Features: Steerer Material: Aluminium Crown Material: Forged Aluminium Stanchion Material: Aluminium, 35mm Lower Material: Magnesium casting Suspension: Air, OTT adjustment (negative spring preload) Damping: Closed cartridge bladder system Steerer Diameter: 1 1/8-1.5", tapered Adjustments: High-speed and low-speed compression, rebound, OTT, air pressure Axle to Crown: 565mm Travel: 170mm Axle: 15x110mm Boost thru axle (bolted) Offset: 37mm Buy DVO Suspension Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
DVO Diamond D1 Boost Fork 29" (44mm Offset)Made to help you to dominate every trail session and “own” the mountain, this daring Diamond D1 Boost Fork comes equipped with Boost-sizing and a robust aluminium construction for taking on enduro rides with fearlessness and control. Equipped with a huge 160mm of terrain-taming and impact-swallowing travel, this DVO 29er mountain bike (MTB) fork smooths out the harshest surfaces. Plus, its D1 damper offers you thirty clicks of high-speed compression adjustment, enabling you to carefully tune the fork to suit your riding style and how it reacts to the trail’s conditions.A High-Performance and Adjustable MTB Fork Kitted out with a closed bladder system and shim stack-controlled damping the Diamond D1 also features Off The Top (OTT) adjustments which help to improve sensitivity over small bumps and the feel of the stroke. A tapered steerer allows for precision handling when navigating trickier sections, while the Boost-sized axle gives a more rigid and responsive performance over gnarly runs with bigger wheels. This really is the perfect MTB fork for the daring enduro racer. Features: Stanchion Material: Aluminium, 35mm Crown Material: Forged Aluminium Lowers Material: Magnesium casting Steerer Tube Material: Aluminium Steerer Tube Size: 1 1/8 - 1.5", tapered Travel: 160mm Adjustable Travel: No Spring Type: Air, OTT adjustment (negative spring preload) Damping: Closed cartridge D1 Damper system Adjustments: High-speed and low-speed compression, rebound speed, Of The Top (OTT), air pressure Axle Type: 15x110mm Boost thru-axle (thru-axle included) Use: All-Mountain (AM), Enduro Lockout: No Axle To Crown Length: 572mm (measurement at maximum travel) Offset: 44mm Disc Brake Caliper Mount: Post Mount Shim Stack Controlled Damping Wheel Size: 29" Hub Width Compatibility: 15x110mm (Boost) Weight: 2150g Technologies:Off The Top (OTT): DVO's industry exclusive OTT feature really sets DVO products apart from anything else. It allows you to perfectly fine-tune how the initial stroke feels without any mid/end stoke compromise. You really do get the best of both worldsBuy DVO Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
DVO Diamond D1 Boost Fork 29" (44mm Offset)Made to help you to dominate every trail session and “own” the mountain, this daring Diamond D1 Boost Fork comes equipped with Boost-sizing and a robust aluminium construction for taking on enduro rides with fearlessness and control. Equipped with a huge 160mm of terrain-taming and impact-swallowing travel, this DVO 29er mountain bike (MTB) fork smooths out the harshest surfaces. Plus, its D1 damper offers you thirty clicks of high-speed compression adjustment, enabling you to carefully tune the fork to suit your riding style and how it reacts to the trail’s conditions.A High-Performance and Adjustable MTB Fork Kitted out with a closed bladder system and shim stack-controlled damping the Diamond D1 also features Off The Top (OTT) adjustments which help to improve sensitivity over small bumps and the feel of the stroke. A tapered steerer allows for precision handling when navigating trickier sections, while the Boost-sized axle gives a more rigid and responsive performance over gnarly runs with bigger wheels. This really is the perfect MTB fork for the daring enduro racer. Features: Stanchion Material: Aluminium, 35mm Crown Material: Forged Aluminium Lowers Material: Magnesium casting Steerer Tube Material: Aluminium Steerer Tube Size: 1 1/8 - 1.5", tapered Travel: 160mm Adjustable Travel: No Spring Type: Air, OTT adjustment (negative spring preload) Damping: Closed cartridge D1 Damper system Adjustments: High-speed and low-speed compression, rebound speed, Of The Top (OTT), air pressure Axle Type: 15x110mm Boost thru-axle (thru-axle included) Use: All-Mountain (AM), Enduro Lockout: No Axle To Crown Length: 572mm (measurement at maximum travel) Offset: 44mm Disc Brake Caliper Mount: Post Mount Shim Stack Controlled Damping Wheel Size: 29" Hub Width Compatibility: 15x110mm (Boost) Weight: 2150g Technologies:Off The Top (OTT): DVO's industry exclusive OTT feature really sets DVO products apart from anything else. It allows you to perfectly fine-tune how the initial stroke feels without any mid/end stoke compromise. You really do get the best of both worldsBuy DVO Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
DVO Diamond D1 Boost Fork 29" (44mm Offset)Made to help you to dominate every trail session and “own” the mountain, this daring Diamond D1 Boost Fork comes equipped with Boost-sizing and a robust aluminium construction for taking on enduro rides with fearlessness and control. Equipped with a huge 160mm of terrain-taming and impact-swallowing travel, this DVO 29er mountain bike (MTB) fork smooths out the harshest surfaces. Plus, its D1 damper offers you thirty clicks of high-speed compression adjustment, enabling you to carefully tune the fork to suit your riding style and how it reacts to the trail’s conditions.A High-Performance and Adjustable MTB Fork Kitted out with a closed bladder system and shim stack-controlled damping the Diamond D1 also features Off The Top (OTT) adjustments which help to improve sensitivity over small bumps and the feel of the stroke. A tapered steerer allows for precision handling when navigating trickier sections, while the Boost-sized axle gives a more rigid and responsive performance over gnarly runs with bigger wheels. This really is the perfect MTB fork for the daring enduro racer. Features: Stanchion Material: Aluminium, 35mm Crown Material: Forged Aluminium Lowers Material: Magnesium casting Steerer Tube Material: Aluminium Steerer Tube Size: 1 1/8 - 1.5", tapered Travel: 160mm Adjustable Travel: No Spring Type: Air, OTT adjustment (negative spring preload) Damping: Closed cartridge D1 Damper system Adjustments: High-speed and low-speed compression, rebound speed, Of The Top (OTT), air pressure Axle Type: 15x110mm Boost thru-axle (thru-axle included) Use: All-Mountain (AM), Enduro Lockout: No Axle To Crown Length: 572mm (measurement at maximum travel) Offset: 44mm Disc Brake Caliper Mount: Post Mount Shim Stack Controlled Damping Wheel Size: 29" Hub Width Compatibility: 15x110mm (Boost) Weight: 2150g Technologies:Off The Top (OTT): DVO's industry exclusive OTT feature really sets DVO products apart from anything else. It allows you to perfectly fine-tune how the initial stroke feels without any mid/end stoke compromise. You really do get the best of both worldsBuy DVO Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
◌Marzocchi Bomber Z1 Coil Mountain Bike ForksThis Mountain Bike Fork from Marzocchi features a tried and tested modern 36mm chassis, ideal for withstanding all the challenges from tough mountain bike (MTB) trails. Benefiting from Marzocchi's GRIP damper, it replaces the air-spring with a highly advanced coil system, for a lightweight spring that's made from tempered silicon Chromoly (CrMo) for exceptional durability and control, no matter what the terrain brings.Adjustable MTB Coil ForkReady for fast-paced adventures, this MTB fork is kitted out with an adjustment noise reduction system. This allows you to benefit from almost silent operation and external preload adjustment, which enables you to fine-tune the sag and suspension firmness. Compression and rebound can also be fine-tuned to set the fork up to suit your riding preferences and the trail conditions. One final highlight is the Marzochhi Bomber Z1 Coil Fork allows for alternative spring weights or inner spacers to be installed. This means you can customise its travel and performance even further.Features:Use: MTBFork Material: AluminiumFork Travel: 170mmChassis: 36mmAxle Included: YesAxle Type: 15 Quick Release x 110Damping: GRIP (compression + rebound)Lockout: YesOffset: 44mmSpring: Tempered Silicone-Chromium SteelSteerer: 1.5" tapered AluminiumStanchions: 36mm black AnodisedRake: 44mmWeight: 2.525g (starting weight complete fork)Manufacturer Part Numbers:Black 29", Travel 170mm: MAZ-912-01-091Black 29", Travel 160mm: MAZ-912-01-096Black 27.5", Travel 180mm: MAZ-912-01-099Black 27.5", Travel 170mm: MAZ-912-01-100Red 27.5", Travel 180mm: MAZ-912-01-101Red 29", Travel 170mm: MAZ-912-01-097Buy Marzocchi Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
◌Marzocchi Bomber Z1 Coil Mountain Bike ForksThis Mountain Bike Fork from Marzocchi features a tried and tested modern 36mm chassis, ideal for withstanding all the challenges from tough mountain bike (MTB) trails. Benefiting from Marzocchi's GRIP damper, it replaces the air-spring with a highly advanced coil system, for a lightweight spring that's made from tempered silicon Chromoly (CrMo) for exceptional durability and control, no matter what the terrain brings.Adjustable MTB Coil ForkReady for fast-paced adventures, this MTB fork is kitted out with an adjustment noise reduction system. This allows you to benefit from almost silent operation and external preload adjustment, which enables you to fine-tune the sag and suspension firmness. Compression and rebound can also be fine-tuned to set the fork up to suit your riding preferences and the trail conditions. One final highlight is the Marzochhi Bomber Z1 Coil Fork allows for alternative spring weights or inner spacers to be installed. This means you can customise its travel and performance even further.Features:Use: MTBFork Material: AluminiumFork Travel: 170mmChassis: 36mmAxle Included: YesAxle Type: 15 Quick Release x 110Damping: GRIP (compression + rebound)Lockout: YesOffset: 44mmSpring: Tempered Silicone-Chromium SteelSteerer: 1.5" tapered AluminiumStanchions: 36mm black AnodisedRake: 44mmWeight: 2.525g (starting weight complete fork)Manufacturer Part Numbers:Black 29", Travel 170mm: MAZ-912-01-091Black 29", Travel 160mm: MAZ-912-01-096Black 27.5", Travel 180mm: MAZ-912-01-099Black 27.5", Travel 170mm: MAZ-912-01-100Red 27.5", Travel 180mm: MAZ-912-01-101Red 29", Travel 170mm: MAZ-912-01-097Buy Marzocchi Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Manitou Dorado Comp Suspension ForkFeaturing a robust 6000 series aluminium leg construction, this mountain bike (MTB) suspension fork delivers tough and dependable performance as you charge down the trail. Coming kitted out with Boost axle spacing, it also ensures stiffer, stronger and more efficient handling when dominating your way across challenging terrain conditions. Benefitting from post most disc brake rotor compatibility, it offers reliable front-end suspension performance in combination with your powerful and consistent braking set-up.Inverted Design and 37mm StanchionsInverted forks provide an incredibly smooth and consistent feel due to the constant lubrication of the bushings and seals. Inverted forks also provide a major increase in fore-aft stiffness with much longer bushing overlap compared to traditional fork designs while maintaining torsional compliance which provides more control to the rider over rough trail sections. 37mm proved to be the perfect balance of increased stiffness, weight savings, and an ideal seal surface area for reduced friction. Compared to the previous 36mm version of the Dorado, the updated 37mm alloy increased in stiffness at 20% for both fore-aft and torsionally when compared to the former 36mm. Dorado Comp is also electric bike (E-bike) certified.Coil Spring and Absolute Plus (ABS+) DampingReady for fast and intense rides, this model is equipped with a coil spring for maximum bump sensitivity and simple service procedures. Known for its incredible reliability and easy tuning, its Absolute Plus (ABS+) damper is a shim stack based damper that features external incremental Low Speed compression adjustment. The piston and shim stack are adaptable for a wide range of riding styles.Coil Fans Rejoice!Once again, the Dorado is available with a coil option. The updated Dorado Comp features the same 37mm chassis as the Expert, but with a more set it and forget it vibe. The coil spring provides a smooth consistent feel 100% of the time with 0% of any hassle. On the damping side of things, our ABS+ Damper offers a great adjustment range, terrific reliability, and easy serviceability. The Manitou Dorado Comp Suspension Fork is built for riders who just want to ride and not sweat any of the small stuff.Features: Legs Material: 6000 Series Aluminium Legs Diameter: 37mm Use: MTB Axle: 110x20mm Boost Thru Axle Steerer: 1-1/8" Straight Spring: Coil (5 rates available) Compression Damping: Absolute Plus (ABS+) Rebound Damping: Cartridge Adjustable TPC Adjustments: LS Compression, Rebound, Spring Preload, Spring Rate Wheel Size: Multiple options available to select Offset: 47mm Flat Crown (27.5" Option); 57mm Drop Crown (29" Option) Ride Height: 582mm (27.5" Option); 602mm (29" Option) Travel: 203mm Crown: Forged Brake Post Mount: 203mm (223 Max) Max Tyre Size: 67mm Extras: Threaded TSR Options: Fender E-Pac: Yes Weight: 3600g (Firm Spring)Technologies: 37mm Chassis results in a massive increase in stiffness and ride quality. The updated chassis is 20% stiffer compared to the brand's former 36mm version. Inverted Design provides an incredibly smooth and consistent feel due to constant lubrication of the bushings and seals. The inverted design also provides a major increase in fore-aft stiffness compared to traditional forks while maintaining torsional compliance which provides more control to the rider over rough terrain. Coil Spring provides maximum bump sensitivity and simple service procedures. The standard spring rate provided in the fork is a medium rate of 35lb/in. For tuning, there are six spring rates available for this fork; 25lb/in, 30lb/in, 35lb/in, 40lb/in, 45lb/in, 50lb/in. ABS+ damper is known for its incredible reliability and easy tunability. Adjustments include a low-speed compression adjust and low-speed rebound adjustment. Fits both 29" and 27.5" wheels. Markings on the outer legs indicate the proper clamping point for ideal axle to crown measurements depending on wheelsize. The fork legs can be used with both wheel sizes. Two Crown Options are available with this fork. The 47 offset is designed to work with 27.5" wheels and intended axle to crown. The 57 offset crown is designed for 29" wheels and axle to crown. For those looking to run the lower offset crown with 29" wheels please reference our fit document to see if your headtube length is compatible. TSR Bleed Screws allow you to release excess pressures built up in the outer legs of your fork while riding keeping your fork smooth and supple all day long.Manufacturer's Part Numbers: 191-37873-A101 Black 27.5" 203mm 191-37873-A201 Black 29" 203mmBuy Manitou Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Manitou Dorado Expert Suspension ForkFeaturing high-quality 6000 series aluminium legs, this mountain bike (MTB) suspension fork is robust and reliable as you charge from trail to trail. Manitou has also equipped this model with Boost axle spacing for stronger, stiffer and more efficient performance, wherever your next mountain adventure takes you. Benefitting from 203mm travel that's also internally adjustable, it allows you to tweak it for a more rider-tuned feel. Coming kitted out with post mount disc brake rotor compatibility, you'll enjoy its dependable front end suspension performance combined with powerful and consistent braking.Dorado Air Spring and TPC+ Compression DampingReady for wherever the trail leads you, this MTB fork is equipped with a wide range of adjustment features for a more customised feel on your bike. Its Dorado Air air spring with Incremental Volume Adjust (IVA) offers a consistent feel without any flat or dead spots. Another highlight is its TPC+ compression damping with Hydraulic Bottom Out (HBO), which delivers improved bump compliance, increased consistency as well as a smooth and predictable feel for every impact. With high-speed compression, low-speed compression plus, low-speed rebound adjustments, this is a great choice of upgrade for dialling in your ideal settings to match your riding style as well as the terrain.Get InvertedBack and better than ever the updated Dorado Expert is ready to take on the gnarliest conditions mountain biking can provide. Whether you're looking to cut seconds off the splits, lap the local park, or get sendy in the back hills of Utah, the Dorado Expert has you covered. Featuring a revised 37mm chassis, completely redesigned internals, and on-trail precision that only inverted forks can provide, the Manitou Dorado Expert Suspension Fork is your ticket to the best ride you've ever had.Features: Legs Material: 6000 Series Aluminium Leg Diameter: 37mm Use: Mountain Bike (MTB) Axle: 110x20mm Boost Thru Axle Steerer: 1-1/8" Straight Air Spring: Dorado Air with Incremental Volume Adjust (IVA) Compression Damping: TPC+ with Hydraulic Bottom Out (HBO) Rebound Damping: Cartridge Adjustable TPC Adjustments: Air, Air Volume, Rebound, HS and LS Compression Crown: Forged Brake Post Mount: 203mm (223 Max) Max Tyre Size: 67mm Extras: Threaded TSR E-Bike Compatible: Yes Offset: 47mm (27.5" Option); 57mm (29" Option) Ride Height: 582mm (27.5" Option), 602mm (29" Option) Travel: 203mm internally adjustable Weight: 3120gTechnologies: 37mm Chassis results in a massive increase in stiffness and ride quality. The new chassis is 20% stiffer compared to our former 36mm version. Inverted Design provides an incredibly smooth and consistent feel due to constant lubrication of the bushings and seals. The inverted design also provides a major increase in fore-aft stiffness compared to traditional forks while maintaining torsional compliance which provides more control to the rider over rough terrain. Dorado Air Spring system contains a unique balancing valve that equalizes the positive and negative air chambers during the air fill process resulting in a consistent feel without any flat or dead spots. It also allows easy Travel Adjustability from 180 to 190 and 203mm without the need for any spare parts. IVA (Incremental Volume Adjust) modifies the volume in the positive air chamber with self contained spacers dictating the position of the IVA piston and your volume amount. TPC+ Damper has increased oil volume and improved flow paths for improved bump compliance and increased consistency. TPC+ features two compression pistons, a hydraulic bottom out, and a spring backed IFP for a smooth and predictable feel for every impact. Adjustments include; High-speed compression, Low-speed compression, and Low-speed rebound. Fits both 29" and 27.5" wheels. Markings on the outer legs indicate the proper clamping point for ideal axle to crown measurements depending on wheelsize. The fork legs can be used with both wheel sizes. Two Crown Options are available with this fork. The 47 offset is designed to work with 27.5" wheels and intended axle to crown. The 57 offset crown is designed for 29" wheels and axle to crown. For those looking to run the lower offset crown with 29" wheels please reference our fit document to see if your headtube length is compatible. TSR Bleed Screws allow you to release excess pressures built up in the outer legs of your fork while riding keeping your fork smooth and supple all day long.Manufacturer's Part Numbers: 191-38304-A101 Black 27.5" 203mm 191-38304-A201 Black 29" 203mmBuy Manitou Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Manitou Dorado Expert Suspension ForkFeaturing high-quality 6000 series aluminium legs, this mountain bike (MTB) suspension fork is robust and reliable as you charge from trail to trail. Manitou has also equipped this model with Boost axle spacing for stronger, stiffer and more efficient performance, wherever your next mountain adventure takes you. Benefitting from 203mm travel that's also internally adjustable, it allows you to tweak it for a more rider-tuned feel. Coming kitted out with post mount disc brake rotor compatibility, you'll enjoy its dependable front end suspension performance combined with powerful and consistent braking.Dorado Air Spring and TPC+ Compression DampingReady for wherever the trail leads you, this MTB fork is equipped with a wide range of adjustment features for a more customised feel on your bike. Its Dorado Air air spring with Incremental Volume Adjust (IVA) offers a consistent feel without any flat or dead spots. Another highlight is its TPC+ compression damping with Hydraulic Bottom Out (HBO), which delivers improved bump compliance, increased consistency as well as a smooth and predictable feel for every impact. With high-speed compression, low-speed compression plus, low-speed rebound adjustments, this is a great choice of upgrade for dialling in your ideal settings to match your riding style as well as the terrain.Get InvertedBack and better than ever the updated Dorado Expert is ready to take on the gnarliest conditions mountain biking can provide. Whether you're looking to cut seconds off the splits, lap the local park, or get sendy in the back hills of Utah, the Dorado Expert has you covered. Featuring a revised 37mm chassis, completely redesigned internals, and on-trail precision that only inverted forks can provide, the Manitou Dorado Expert Suspension Fork is your ticket to the best ride you've ever had.Features: Legs Material: 6000 Series Aluminium Leg Diameter: 37mm Use: Mountain Bike (MTB) Axle: 110x20mm Boost Thru Axle Steerer: 1-1/8" Straight Air Spring: Dorado Air with Incremental Volume Adjust (IVA) Compression Damping: TPC+ with Hydraulic Bottom Out (HBO) Rebound Damping: Cartridge Adjustable TPC Adjustments: Air, Air Volume, Rebound, HS and LS Compression Crown: Forged Brake Post Mount: 203mm (223 Max) Max Tyre Size: 67mm Extras: Threaded TSR E-Bike Compatible: Yes Offset: 47mm (27.5" Option); 57mm (29" Option) Ride Height: 582mm (27.5" Option), 602mm (29" Option) Travel: 203mm internally adjustable Weight: 3120gTechnologies: 37mm Chassis results in a massive increase in stiffness and ride quality. The new chassis is 20% stiffer compared to our former 36mm version. Inverted Design provides an incredibly smooth and consistent feel due to constant lubrication of the bushings and seals. The inverted design also provides a major increase in fore-aft stiffness compared to traditional forks while maintaining torsional compliance which provides more control to the rider over rough terrain. Dorado Air Spring system contains a unique balancing valve that equalizes the positive and negative air chambers during the air fill process resulting in a consistent feel without any flat or dead spots. It also allows easy Travel Adjustability from 180 to 190 and 203mm without the need for any spare parts. IVA (Incremental Volume Adjust) modifies the volume in the positive air chamber with self contained spacers dictating the position of the IVA piston and your volume amount. TPC+ Damper has increased oil volume and improved flow paths for improved bump compliance and increased consistency. TPC+ features two compression pistons, a hydraulic bottom out, and a spring backed IFP for a smooth and predictable feel for every impact. Adjustments include; High-speed compression, Low-speed compression, and Low-speed rebound. Fits both 29" and 27.5" wheels. Markings on the outer legs indicate the proper clamping point for ideal axle to crown measurements depending on wheelsize. The fork legs can be used with both wheel sizes. Two Crown Options are available with this fork. The 47 offset is designed to work with 27.5" wheels and intended axle to crown. The 57 offset crown is designed for 29" wheels and axle to crown. For those looking to run the lower offset crown with 29" wheels please reference our fit document to see if your headtube length is compatible. TSR Bleed Screws allow you to release excess pressures built up in the outer legs of your fork while riding keeping your fork smooth and supple all day long.Manufacturer's Part Numbers: 191-38304-A101 Black 27.5" 203mm 191-38304-A201 Black 29" 203mmBuy Manitou Components from Chain Reaction Cycles, the World's Largest Online Bike Store.