Compatible with linear pull and cantilever braking systems, the Mountain Sport brake pads are available in your choice of bright colors or standard black and gray. Featuring the tried and true all-weather compound, Mountain Sport brake pads deliver the performance you demand.
Comp MTB Linear Offset PostMoulded & threaded Durable pad for long lastting performance Special compound reduces brake squeal Forceful stopping
Jagwire Mountain Sport Offset Pads. Compund Sport All WeatherSize 70mmLinear Fit,Moulded and threaded post.
Manitou Dorado Comp Suspension ForkFeaturing a robust 6000 series aluminium leg construction, this mountain bike (MTB) suspension fork delivers tough and dependable performance as you charge down the trail. Coming kitted out with Boost axle spacing, it also ensures stiffer, stronger and more efficient handling when dominating your way across challenging terrain conditions. Benefitting from post most disc brake rotor compatibility, it offers reliable front-end suspension performance in combination with your powerful and consistent braking set-up.Inverted Design and 37mm StanchionsInverted forks provide an incredibly smooth and consistent feel due to the constant lubrication of the bushings and seals. Inverted forks also provide a major increase in fore-aft stiffness with much longer bushing overlap compared to traditional fork designs while maintaining torsional compliance which provides more control to the rider over rough trail sections. 37mm proved to be the perfect balance of increased stiffness, weight savings, and an ideal seal surface area for reduced friction. Compared to the previous 36mm version of the Dorado, the updated 37mm alloy increased in stiffness at 20% for both fore-aft and torsionally when compared to the former 36mm. Dorado Comp is also electric bike (E-bike) certified.Coil Spring and Absolute Plus (ABS+) DampingReady for fast and intense rides, this model is equipped with a coil spring for maximum bump sensitivity and simple service procedures. Known for its incredible reliability and easy tuning, its Absolute Plus (ABS+) damper is a shim stack based damper that features external incremental Low Speed compression adjustment. The piston and shim stack are adaptable for a wide range of riding styles.Coil Fans Rejoice!Once again, the Dorado is available with a coil option. The updated Dorado Comp features the same 37mm chassis as the Expert, but with a more set it and forget it vibe. The coil spring provides a smooth consistent feel 100% of the time with 0% of any hassle. On the damping side of things, our ABS+ Damper offers a great adjustment range, terrific reliability, and easy serviceability. The Manitou Dorado Comp Suspension Fork is built for riders who just want to ride and not sweat any of the small stuff.Features: Legs Material: 6000 Series Aluminium Legs Diameter: 37mm Use: MTB Axle: 110x20mm Boost Thru Axle Steerer: 1-1/8" Straight Spring: Coil (5 rates available) Compression Damping: Absolute Plus (ABS+) Rebound Damping: Cartridge Adjustable TPC Adjustments: LS Compression, Rebound, Spring Preload, Spring Rate Wheel Size: Multiple options available to select Offset: 47mm Flat Crown (27.5" Option); 57mm Drop Crown (29" Option) Ride Height: 582mm (27.5" Option); 602mm (29" Option) Travel: 203mm Crown: Forged Brake Post Mount: 203mm (223 Max) Max Tyre Size: 67mm Extras: Threaded TSR Options: Fender E-Pac: Yes Weight: 3600g (Firm Spring)Technologies: 37mm Chassis results in a massive increase in stiffness and ride quality. The updated chassis is 20% stiffer compared to the brand's former 36mm version. Inverted Design provides an incredibly smooth and consistent feel due to constant lubrication of the bushings and seals. The inverted design also provides a major increase in fore-aft stiffness compared to traditional forks while maintaining torsional compliance which provides more control to the rider over rough terrain. Coil Spring provides maximum bump sensitivity and simple service procedures. The standard spring rate provided in the fork is a medium rate of 35lb/in. For tuning, there are six spring rates available for this fork; 25lb/in, 30lb/in, 35lb/in, 40lb/in, 45lb/in, 50lb/in. ABS+ damper is known for its incredible reliability and easy tunability. Adjustments include a low-speed compression adjust and low-speed rebound adjustment. Fits both 29" and 27.5" wheels. Markings on the outer legs indicate the proper clamping point for ideal axle to crown measurements depending on wheelsize. The fork legs can be used with both wheel sizes. Two Crown Options are available with this fork. The 47 offset is designed to work with 27.5" wheels and intended axle to crown. The 57 offset crown is designed for 29" wheels and axle to crown. For those looking to run the lower offset crown with 29" wheels please reference our fit document to see if your headtube length is compatible. TSR Bleed Screws allow you to release excess pressures built up in the outer legs of your fork while riding keeping your fork smooth and supple all day long.Manufacturer's Part Numbers: 191-37873-A101 Black 27.5" 203mm 191-37873-A201 Black 29" 203mmBuy Manitou Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Manitou Dorado Expert Suspension ForkFeaturing high-quality 6000 series aluminium legs, this mountain bike (MTB) suspension fork is robust and reliable as you charge from trail to trail. Manitou has also equipped this model with Boost axle spacing for stronger, stiffer and more efficient performance, wherever your next mountain adventure takes you. Benefitting from 203mm travel that's also internally adjustable, it allows you to tweak it for a more rider-tuned feel. Coming kitted out with post mount disc brake rotor compatibility, you'll enjoy its dependable front end suspension performance combined with powerful and consistent braking.Dorado Air Spring and TPC+ Compression DampingReady for wherever the trail leads you, this MTB fork is equipped with a wide range of adjustment features for a more customised feel on your bike. Its Dorado Air air spring with Incremental Volume Adjust (IVA) offers a consistent feel without any flat or dead spots. Another highlight is its TPC+ compression damping with Hydraulic Bottom Out (HBO), which delivers improved bump compliance, increased consistency as well as a smooth and predictable feel for every impact. With high-speed compression, low-speed compression plus, low-speed rebound adjustments, this is a great choice of upgrade for dialling in your ideal settings to match your riding style as well as the terrain.Get InvertedBack and better than ever the updated Dorado Expert is ready to take on the gnarliest conditions mountain biking can provide. Whether you're looking to cut seconds off the splits, lap the local park, or get sendy in the back hills of Utah, the Dorado Expert has you covered. Featuring a revised 37mm chassis, completely redesigned internals, and on-trail precision that only inverted forks can provide, the Manitou Dorado Expert Suspension Fork is your ticket to the best ride you've ever had.Features: Legs Material: 6000 Series Aluminium Leg Diameter: 37mm Use: Mountain Bike (MTB) Axle: 110x20mm Boost Thru Axle Steerer: 1-1/8" Straight Air Spring: Dorado Air with Incremental Volume Adjust (IVA) Compression Damping: TPC+ with Hydraulic Bottom Out (HBO) Rebound Damping: Cartridge Adjustable TPC Adjustments: Air, Air Volume, Rebound, HS and LS Compression Crown: Forged Brake Post Mount: 203mm (223 Max) Max Tyre Size: 67mm Extras: Threaded TSR E-Bike Compatible: Yes Offset: 47mm (27.5" Option); 57mm (29" Option) Ride Height: 582mm (27.5" Option), 602mm (29" Option) Travel: 203mm internally adjustable Weight: 3120gTechnologies: 37mm Chassis results in a massive increase in stiffness and ride quality. The new chassis is 20% stiffer compared to our former 36mm version. Inverted Design provides an incredibly smooth and consistent feel due to constant lubrication of the bushings and seals. The inverted design also provides a major increase in fore-aft stiffness compared to traditional forks while maintaining torsional compliance which provides more control to the rider over rough terrain. Dorado Air Spring system contains a unique balancing valve that equalizes the positive and negative air chambers during the air fill process resulting in a consistent feel without any flat or dead spots. It also allows easy Travel Adjustability from 180 to 190 and 203mm without the need for any spare parts. IVA (Incremental Volume Adjust) modifies the volume in the positive air chamber with self contained spacers dictating the position of the IVA piston and your volume amount. TPC+ Damper has increased oil volume and improved flow paths for improved bump compliance and increased consistency. TPC+ features two compression pistons, a hydraulic bottom out, and a spring backed IFP for a smooth and predictable feel for every impact. Adjustments include; High-speed compression, Low-speed compression, and Low-speed rebound. Fits both 29" and 27.5" wheels. Markings on the outer legs indicate the proper clamping point for ideal axle to crown measurements depending on wheelsize. The fork legs can be used with both wheel sizes. Two Crown Options are available with this fork. The 47 offset is designed to work with 27.5" wheels and intended axle to crown. The 57 offset crown is designed for 29" wheels and axle to crown. For those looking to run the lower offset crown with 29" wheels please reference our fit document to see if your headtube length is compatible. TSR Bleed Screws allow you to release excess pressures built up in the outer legs of your fork while riding keeping your fork smooth and supple all day long.Manufacturer's Part Numbers: 191-38304-A101 Black 27.5" 203mm 191-38304-A201 Black 29" 203mmBuy Manitou Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Manitou Dorado Expert Suspension ForkFeaturing high-quality 6000 series aluminium legs, this mountain bike (MTB) suspension fork is robust and reliable as you charge from trail to trail. Manitou has also equipped this model with Boost axle spacing for stronger, stiffer and more efficient performance, wherever your next mountain adventure takes you. Benefitting from 203mm travel that's also internally adjustable, it allows you to tweak it for a more rider-tuned feel. Coming kitted out with post mount disc brake rotor compatibility, you'll enjoy its dependable front end suspension performance combined with powerful and consistent braking.Dorado Air Spring and TPC+ Compression DampingReady for wherever the trail leads you, this MTB fork is equipped with a wide range of adjustment features for a more customised feel on your bike. Its Dorado Air air spring with Incremental Volume Adjust (IVA) offers a consistent feel without any flat or dead spots. Another highlight is its TPC+ compression damping with Hydraulic Bottom Out (HBO), which delivers improved bump compliance, increased consistency as well as a smooth and predictable feel for every impact. With high-speed compression, low-speed compression plus, low-speed rebound adjustments, this is a great choice of upgrade for dialling in your ideal settings to match your riding style as well as the terrain.Get InvertedBack and better than ever the updated Dorado Expert is ready to take on the gnarliest conditions mountain biking can provide. Whether you're looking to cut seconds off the splits, lap the local park, or get sendy in the back hills of Utah, the Dorado Expert has you covered. Featuring a revised 37mm chassis, completely redesigned internals, and on-trail precision that only inverted forks can provide, the Manitou Dorado Expert Suspension Fork is your ticket to the best ride you've ever had.Features: Legs Material: 6000 Series Aluminium Leg Diameter: 37mm Use: Mountain Bike (MTB) Axle: 110x20mm Boost Thru Axle Steerer: 1-1/8" Straight Air Spring: Dorado Air with Incremental Volume Adjust (IVA) Compression Damping: TPC+ with Hydraulic Bottom Out (HBO) Rebound Damping: Cartridge Adjustable TPC Adjustments: Air, Air Volume, Rebound, HS and LS Compression Crown: Forged Brake Post Mount: 203mm (223 Max) Max Tyre Size: 67mm Extras: Threaded TSR E-Bike Compatible: Yes Offset: 47mm (27.5" Option); 57mm (29" Option) Ride Height: 582mm (27.5" Option), 602mm (29" Option) Travel: 203mm internally adjustable Weight: 3120gTechnologies: 37mm Chassis results in a massive increase in stiffness and ride quality. The new chassis is 20% stiffer compared to our former 36mm version. Inverted Design provides an incredibly smooth and consistent feel due to constant lubrication of the bushings and seals. The inverted design also provides a major increase in fore-aft stiffness compared to traditional forks while maintaining torsional compliance which provides more control to the rider over rough terrain. Dorado Air Spring system contains a unique balancing valve that equalizes the positive and negative air chambers during the air fill process resulting in a consistent feel without any flat or dead spots. It also allows easy Travel Adjustability from 180 to 190 and 203mm without the need for any spare parts. IVA (Incremental Volume Adjust) modifies the volume in the positive air chamber with self contained spacers dictating the position of the IVA piston and your volume amount. TPC+ Damper has increased oil volume and improved flow paths for improved bump compliance and increased consistency. TPC+ features two compression pistons, a hydraulic bottom out, and a spring backed IFP for a smooth and predictable feel for every impact. Adjustments include; High-speed compression, Low-speed compression, and Low-speed rebound. Fits both 29" and 27.5" wheels. Markings on the outer legs indicate the proper clamping point for ideal axle to crown measurements depending on wheelsize. The fork legs can be used with both wheel sizes. Two Crown Options are available with this fork. The 47 offset is designed to work with 27.5" wheels and intended axle to crown. The 57 offset crown is designed for 29" wheels and axle to crown. For those looking to run the lower offset crown with 29" wheels please reference our fit document to see if your headtube length is compatible. TSR Bleed Screws allow you to release excess pressures built up in the outer legs of your fork while riding keeping your fork smooth and supple all day long.Manufacturer's Part Numbers: 191-38304-A101 Black 27.5" 203mm 191-38304-A201 Black 29" 203mmBuy Manitou Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Manitou Dorado Pro Suspension ForkThe legendary Dorado Pro is back and well-equipped to turn the suspension world upside down with many of Manitou's finest technologies. Developed specifically for the rigours of modern downhill riding, this model features high-quality 6000 series aluminium legs with a carbon outer and carbon upper tubes delivering a fantastic combination of stiffness, durability and low weight performance. Its updated stiffer chassis is also paired with a sealed version of the TPC+ damper and an improved Dorado Air Spring with IRT volume adjuster. These technologies combined into one ultimate platform provides more than enough tunability to satisfy any savvy suspension tuner while being so easy to adjust that every rider can dial in their fork with ease.Carbon Fibre and Inverted DesignAfter its debut 11 years ago, the Dorado Pro is once again dressed in carbon. In addition to looking amazing, the upper carbon tubes allow 238g in weight savings compared to alloy along with increased stiffness. Inverted forks provide an incredibly smooth and consistent feel due to the constant lubrication of the bushings and seals. Inverted forks also provide a major increase in fore-aft stiffness with much longer bushing overlap compared to traditional fork designs while maintaining torsional compliance which provides more control over rough trail sections.Dorado Air Spring and TSR Trail Side ReliefDorado Air spring systems contain a unique balancing valve that equalises the positive and negative air chambers during the air fill process. This gives the spring rate a consistent feel without any flat or dead spots in the stroke, along with giving riders of different weights the same initial stroke feel. TSR Bleed Buttons allow excess pressure built up in the outer legs of the fork to be equalised with a simple press of the button located on the top cap.TPC+ Twin-Piston Cartridge DamperTPC+ is a velocity and position-dependent damping circuit that maintains light damping through small bumps when the fork is high in the travel. As the fork compresses deeper in the travel the secondary TPC+ circuit engages and increases the damping force for added support and bottom-out prevention. Additionally, an independent Hydraulic Bottom-out circuit further increases the damping force in the final 30mm of travel to soften deep travel events and prevent hard bottom out.Features: Outer Leg Material: Carbon Leg Material: 6000 Series Aluminium Leg Diameter: 37mm Use: Downhill Axle: 110x20mm Boost Thru Axle Steerer Diameter: 1 1/8" Straight Spring: Dorado Air with Infinite Rate Tune (IRT) Compression Damping: Sealed Cartridge TPC+ with Hydraulic Bottom Out (HBO) Rebound Damping: Sealed Cartridge TPC Crown: Forged Travel: 203mm Adjustments: Air, IRT, Rebound, HS, and LS Compression Offset: 47mm Flat Crown (27.5"); 57mm Drop Crown (29") Ride Height: 582mm (27.5"); 602mm (29") Brake Post Mount: 203mm (223 Max) Max Tyre Size: 67mm Extras: Threaded TSR Buttons Options: Fender (sold separately) E-Bike Compatible: No Weight: 2970gTechnologies: Carbon Fibre Legs and the 37mm Chassis: Result in the stiffest and lightest Dorado to date. The carbon pro chassis is 27% stiffer than the previous 36mm version and 238g lighter than the new 37mm Expert version. Inverted Design: Provides an incredibly smooth and consistent feel due to constant lubrication of the bushings and seals. The inverted design also provides a major increase in fore-aft stiffness compared to traditional forks while maintaining torsional compliance which provides more control to the rider over rough terrain. Dorado Air Spring System: Contains a unique balancing valve that equalizes the positive and negative air chambers during the air fill process resulting in a consistent feel without any flat or dead spots. It also allows easy Travel Adjustability from 180 to 190 and 203mm without the need for any spare parts. IRT (Infinite Rate Tune): Allows for advanced spring tuning by independently adjusting air pressures in the beginning and end stroke. IRT technology creates a secondary positive air spring that affects only the middle to end stroke of the fork. This allows the main air spring to be set to lower pressures for improved small bump sensitivity while maintaining mid-stroke support and moderate to aggressive end-stroke ramp-up. Sealed TPC+: Is a velocity and position-dependent damping circuit that maintains light damping thru small bumps when the fork is high in its travel. As the fork compresses deeper in the travel the secondary TPC+ circuit engages and increased the damping force for added support and bottom-out prevention. Additionally, an independent Hydraulic Bottom-out circuit further increases the damping force in the final 30mm of travel to soften deep travel events and prevent hard bottom out. The new cartridge design with spring-backed IFP fully seals damper oil for the most consistent damping on long demanding DH runs. Spring-backed IFP has improved performance during extreme riding, unlike a bladder, an IFP pressurizes the oil at the initial stroke eliminating any cavitation for the most consistent damping. Fits Both 29" and 27.5" Wheels: Markings on the outer legs indicate the proper clamping point for ideal axle to crown measurements depending on wheel size. The fork legs can be used with both wheel sizes. Two Crown Options: Are available with this fork (select from the drop-down menu). The 47 offset is designed to work with 27.5" wheels and intended axle to crown. The 57 offset crown is designed for 29" wheels and axle to crown. For those looking to run the lower offset crown with 29" wheels please reference our fit document to see if your headtube length is compatible. TSR Bleed buttons: Allow you to release excess pressures built up in the outer legs of your fork with a simple tap of the button. This keeps your fork smooth and supple all day long.Manufacturer's Part Numbers: 191-37419-A101 Black 27.5" Short Offset 191-37419-A201 Black 29" Long OffsetBuy Manitou Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Manitou R7 Expert Mountain Bike Suspension ForkThis mountain bike (MTB) fork features a tough straight wall aluminium leg construction, which allows it to handle all of the intensity that's associated with training and competing. Coming equipped with an Expert Air spring, VTT compression damping and In-leg adjustable TPC rebound damping, this model allows riders to dial in their ideal riding preferences to match their style or the terrain conditions. Its adjustable air, rebound and three-position compression (Open, Trail and Lock), means that you'll enjoy a more rider-tuned feel with increased performance and reliability, as you tackle every off-road challenge that comes your way.Expert Air SpringThis trail-ready model features the Manitou Expert Air spring system, which contains a unique balancing valve that equalises the positive and negative air chambers during the air fill process. This gives the spring rate a consistent feel without any flat or dead spots in the stroke, along with giving riders of different weights the same initial stroke feel.Variable Terrain Tune - 3-Position Compression AdjustWhen developing the VTT Pro damper, Manitou set out with a goal to maintain a rock-solid lockout without compromising the open and mid settings. The downside to many dampers with firm lockout modes is that in any other position than lock-out you will reach some critical shaft velocity that chokes off the low-speed flow path. When this happens the damper peaks at nearly the same lock-out force as the locked-out position. This translates to harsh force in the hands and possibly lack of control. The goal with VTT is to eliminate that high-speed spike while maintaining the lock-out force demanded by most XC users. This allows the fork to have a less progressive high-speed response while maintaining some low-speed support. This is achieved through independent shim stacks (one for Lockout, one for the other two positions). By controlling the shim stack through which the oil flow is diverted we can manipulate the characteristic of the damper to be Lock-out, Digressive, or progressive to meet the demands of the rider and terrain.ChassisWhen developing the chassis of this Manitou fork, the goal was to find the perfect balance of weight, stiffness, and reliability. Thanks to its Reverse Arch, Manitou is able to position the arch further away from the axle. The lower tyre clearance behind the fork relative to the centre of the axle allows for a shorter arch which yields 13% increased stiffness compared to a forward arch fork of the equivalent weight. Because of this, Manitou is able to use 32mm stanchions to save weight, while keeping stiffness closer to that of a larger stanchion fork with a forward-facing arch.Features: Leg Material: 6000-Series Straight Wall Aluminium Crown Material: Forged Aluminum, Hollow Bore Gloss Axle: 15x110mm Hexlock Use: MTB, XC Steerer Diameter: 1.5" Tapered Leg Diameter: 32mm Spring: Expert Air Compression Damping: VTT Rebound Damping: In-leg adjustable TPC Adjustments: Air, Rebound, 3-position Compression (Open, Trail, Lock) Brake Post Mount: 160mm (203mm Max) Max Tyre Size: 68mm 77mm (27.5"+); 68mm (29") Offset: 37mm (27.5"); 44mm (27.5+/29") Ride Height: 471-511mm (27.5"); 485-525mm (27.5+/29") E-Pac: No Weight: 1789g (27.5"); 1812g (27.5+/29")Manufacturer's Part Numbers: 191-36972-A001 Black 27.5" x 100mm 37mm 191-36972-A002 Black 27.5" x 120mm 37mm 191-36976-A001 Black 27.5+/29" x 100mm 44mm 191-36976-A002 Black 27.5+/29" x 120mm 44mmBuy Manitou Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Manitou R7 Expert Mountain Bike Suspension ForkThis mountain bike (MTB) fork features a tough straight wall aluminium leg construction, which allows it to handle all of the intensity that's associated with training and competing. Coming equipped with an Expert Air spring, VTT compression damping and In-leg adjustable TPC rebound damping, this model allows riders to dial in their ideal riding preferences to match their style or the terrain conditions. Its adjustable air, rebound and three-position compression (Open, Trail and Lock), means that you'll enjoy a more rider-tuned feel with increased performance and reliability, as you tackle every off-road challenge that comes your way.Expert Air SpringThis trail-ready model features the Manitou Expert Air spring system, which contains a unique balancing valve that equalises the positive and negative air chambers during the air fill process. This gives the spring rate a consistent feel without any flat or dead spots in the stroke, along with giving riders of different weights the same initial stroke feel.Variable Terrain Tune - 3-Position Compression AdjustWhen developing the VTT Pro damper, Manitou set out with a goal to maintain a rock-solid lockout without compromising the open and mid settings. The downside to many dampers with firm lockout modes is that in any other position than lock-out you will reach some critical shaft velocity that chokes off the low-speed flow path. When this happens the damper peaks at nearly the same lock-out force as the locked-out position. This translates to harsh force in the hands and possibly lack of control. The goal with VTT is to eliminate that high-speed spike while maintaining the lock-out force demanded by most XC users. This allows the fork to have a less progressive high-speed response while maintaining some low-speed support. This is achieved through independent shim stacks (one for Lockout, one for the other two positions). By controlling the shim stack through which the oil flow is diverted we can manipulate the characteristic of the damper to be Lock-out, Digressive, or progressive to meet the demands of the rider and terrain.ChassisWhen developing the chassis of this Manitou fork, the goal was to find the perfect balance of weight, stiffness, and reliability. Thanks to its Reverse Arch, Manitou is able to position the arch further away from the axle. The lower tyre clearance behind the fork relative to the centre of the axle allows for a shorter arch which yields 13% increased stiffness compared to a forward arch fork of the equivalent weight. Because of this, Manitou is able to use 32mm stanchions to save weight, while keeping stiffness closer to that of a larger stanchion fork with a forward-facing arch.Features: Leg Material: 6000-Series Straight Wall Aluminium Crown Material: Forged Aluminum, Hollow Bore Gloss Axle: 15x110mm Hexlock Use: MTB, XC Steerer Diameter: 1.5" Tapered Leg Diameter: 32mm Spring: Expert Air Compression Damping: VTT Rebound Damping: In-leg adjustable TPC Adjustments: Air, Rebound, 3-position Compression (Open, Trail, Lock) Brake Post Mount: 160mm (203mm Max) Max Tyre Size: 68mm 77mm (27.5"+); 68mm (29") Offset: 37mm (27.5"); 44mm (27.5+/29") Ride Height: 471-511mm (27.5"); 485-525mm (27.5+/29") E-Pac: No Weight: 1789g (27.5"); 1812g (27.5+/29")Manufacturer's Part Numbers: 191-36972-A001 Black 27.5" x 100mm 37mm 191-36972-A002 Black 27.5" x 120mm 37mm 191-36976-A001 Black 27.5+/29" x 100mm 44mm 191-36976-A002 Black 27.5+/29" x 120mm 44mmBuy Manitou Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Manitou R7 Expert Mountain Bike Suspension ForkThis mountain bike (MTB) fork features a tough straight wall aluminium leg construction, which allows it to handle all of the intensity that's associated with training and competing. Coming equipped with an Expert Air spring, VTT compression damping and In-leg adjustable TPC rebound damping, this model allows riders to dial in their ideal riding preferences to match their style or the terrain conditions. Its adjustable air, rebound and three-position compression (Open, Trail and Lock), means that you'll enjoy a more rider-tuned feel with increased performance and reliability, as you tackle every off-road challenge that comes your way.Expert Air SpringThis trail-ready model features the Manitou Expert Air spring system, which contains a unique balancing valve that equalises the positive and negative air chambers during the air fill process. This gives the spring rate a consistent feel without any flat or dead spots in the stroke, along with giving riders of different weights the same initial stroke feel.Variable Terrain Tune - 3-Position Compression AdjustWhen developing the VTT Pro damper, Manitou set out with a goal to maintain a rock-solid lockout without compromising the open and mid settings. The downside to many dampers with firm lockout modes is that in any other position than lock-out you will reach some critical shaft velocity that chokes off the low-speed flow path. When this happens the damper peaks at nearly the same lock-out force as the locked-out position. This translates to harsh force in the hands and possibly lack of control. The goal with VTT is to eliminate that high-speed spike while maintaining the lock-out force demanded by most XC users. This allows the fork to have a less progressive high-speed response while maintaining some low-speed support. This is achieved through independent shim stacks (one for Lockout, one for the other two positions). By controlling the shim stack through which the oil flow is diverted we can manipulate the characteristic of the damper to be Lock-out, Digressive, or progressive to meet the demands of the rider and terrain.ChassisWhen developing the chassis of this Manitou fork, the goal was to find the perfect balance of weight, stiffness, and reliability. Thanks to its Reverse Arch, Manitou is able to position the arch further away from the axle. The lower tyre clearance behind the fork relative to the centre of the axle allows for a shorter arch which yields 13% increased stiffness compared to a forward arch fork of the equivalent weight. Because of this, Manitou is able to use 32mm stanchions to save weight, while keeping stiffness closer to that of a larger stanchion fork with a forward-facing arch.Features: Leg Material: 6000-Series Straight Wall Aluminium Crown Material: Forged Aluminum, Hollow Bore Gloss Axle: 15x110mm Hexlock Use: MTB, XC Steerer Diameter: 1.5" Tapered Leg Diameter: 32mm Spring: Expert Air Compression Damping: VTT Rebound Damping: In-leg adjustable TPC Adjustments: Air, Rebound, 3-position Compression (Open, Trail, Lock) Brake Post Mount: 160mm (203mm Max) Max Tyre Size: 68mm 77mm (27.5"+); 68mm (29") Offset: 37mm (27.5"); 44mm (27.5+/29") Ride Height: 471-511mm (27.5"); 485-525mm (27.5+/29") E-Pac: No Weight: 1789g (27.5"); 1812g (27.5+/29")Manufacturer's Part Numbers: 191-36972-A001 Black 27.5" x 100mm 37mm 191-36972-A002 Black 27.5" x 120mm 37mm 191-36976-A001 Black 27.5+/29" x 100mm 44mm 191-36976-A002 Black 27.5+/29" x 120mm 44mmBuy Manitou Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Manitou R7 Expert Mountain Bike Suspension ForkThis mountain bike (MTB) fork features a tough straight wall aluminium leg construction, which allows it to handle all of the intensity that's associated with training and competing. Coming equipped with an Expert Air spring, VTT compression damping and In-leg adjustable TPC rebound damping, this model allows riders to dial in their ideal riding preferences to match their style or the terrain conditions. Its adjustable air, rebound and three-position compression (Open, Trail and Lock), means that you'll enjoy a more rider-tuned feel with increased performance and reliability, as you tackle every off-road challenge that comes your way.Expert Air SpringThis trail-ready model features the Manitou Expert Air spring system, which contains a unique balancing valve that equalises the positive and negative air chambers during the air fill process. This gives the spring rate a consistent feel without any flat or dead spots in the stroke, along with giving riders of different weights the same initial stroke feel.Variable Terrain Tune - 3-Position Compression AdjustWhen developing the VTT Pro damper, Manitou set out with a goal to maintain a rock-solid lockout without compromising the open and mid settings. The downside to many dampers with firm lockout modes is that in any other position than lock-out you will reach some critical shaft velocity that chokes off the low-speed flow path. When this happens the damper peaks at nearly the same lock-out force as the locked-out position. This translates to harsh force in the hands and possibly lack of control. The goal with VTT is to eliminate that high-speed spike while maintaining the lock-out force demanded by most XC users. This allows the fork to have a less progressive high-speed response while maintaining some low-speed support. This is achieved through independent shim stacks (one for Lockout, one for the other two positions). By controlling the shim stack through which the oil flow is diverted we can manipulate the characteristic of the damper to be Lock-out, Digressive, or progressive to meet the demands of the rider and terrain.ChassisWhen developing the chassis of this Manitou fork, the goal was to find the perfect balance of weight, stiffness, and reliability. Thanks to its Reverse Arch, Manitou is able to position the arch further away from the axle. The lower tyre clearance behind the fork relative to the centre of the axle allows for a shorter arch which yields 13% increased stiffness compared to a forward arch fork of the equivalent weight. Because of this, Manitou is able to use 32mm stanchions to save weight, while keeping stiffness closer to that of a larger stanchion fork with a forward-facing arch.Features: Leg Material: 6000-Series Straight Wall Aluminium Crown Material: Forged Aluminum, Hollow Bore Gloss Axle: 15x110mm Hexlock Use: MTB, XC Steerer Diameter: 1.5" Tapered Leg Diameter: 32mm Spring: Expert Air Compression Damping: VTT Rebound Damping: In-leg adjustable TPC Adjustments: Air, Rebound, 3-position Compression (Open, Trail, Lock) Brake Post Mount: 160mm (203mm Max) Max Tyre Size: 68mm 77mm (27.5"+); 68mm (29") Offset: 37mm (27.5"); 44mm (27.5+/29") Ride Height: 471-511mm (27.5"); 485-525mm (27.5+/29") E-Pac: No Weight: 1789g (27.5"); 1812g (27.5+/29")Manufacturer's Part Numbers: 191-36972-A001 Black 27.5" x 100mm 37mm 191-36972-A002 Black 27.5" x 120mm 37mm 191-36976-A001 Black 27.5+/29" x 100mm 44mm 191-36976-A002 Black 27.5+/29" x 120mm 44mmBuy Manitou Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
◌Marzocchi Bomber Z1 Coil Mountain Bike ForksThis Mountain Bike Fork from Marzocchi features a tried and tested modern 36mm chassis, ideal for withstanding all the challenges from tough mountain bike (MTB) trails. Benefiting from Marzocchi's GRIP damper, it replaces the air-spring with a highly advanced coil system, for a lightweight spring that's made from tempered silicon Chromoly (CrMo) for exceptional durability and control, no matter what the terrain brings.Adjustable MTB Coil ForkReady for fast-paced adventures, this MTB fork is kitted out with an adjustment noise reduction system. This allows you to benefit from almost silent operation and external preload adjustment, which enables you to fine-tune the sag and suspension firmness. Compression and rebound can also be fine-tuned to set the fork up to suit your riding preferences and the trail conditions. One final highlight is the Marzochhi Bomber Z1 Coil Fork allows for alternative spring weights or inner spacers to be installed. This means you can customise its travel and performance even further.Features:Use: MTBFork Material: AluminiumFork Travel: 170mmChassis: 36mmAxle Included: YesAxle Type: 15 Quick Release x 110Damping: GRIP (compression + rebound)Lockout: YesOffset: 44mmSpring: Tempered Silicone-Chromium SteelSteerer: 1.5" tapered AluminiumStanchions: 36mm black AnodisedRake: 44mmWeight: 2.525g (starting weight complete fork)Manufacturer Part Numbers:Black 29", Travel 170mm: MAZ-912-01-091Black 29", Travel 160mm: MAZ-912-01-096Black 27.5", Travel 180mm: MAZ-912-01-099Black 27.5", Travel 170mm: MAZ-912-01-100Red 27.5", Travel 180mm: MAZ-912-01-101Red 29", Travel 170mm: MAZ-912-01-097Buy Marzocchi Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.