Part of the brand's renowned Factory Series, this mountain bike (MTB) rear shock is engineered for maximum rear-end suspension performance on the most demanding of trail conditions. It features a wide range of adjustment features including an independent two-position Open/Firm lever, which allows you to easily dial-in your ideal settings to match your riding style as well as the terrain. Fox Suspension has also kitted out this model with 16 clicks of Low Speed Rebound and 11 clicks of Low Speed Compression, so you can benefit from a more rider-tuned feel with high-performance damping wherever your ride takes you. Coming complete with a genuine Kashima coating, this high-quality Factory Series version delivers enhanced lubrication and a harder wearing surface, which results in increased shock smoothness and sensitivity on the trails. Heavyweight Features in a Lightweight Package Designed specifically to meet the demands of aggressive trail riders, the Float X combines sophisticated damping and fade-free performance with incredible light weight and outstanding structural integrity. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. - Updated chassis and damper. - High-flow main piston. - Air seal package. - Volume spacers with smaller increments. - MCU bottom out bumper. - Numbered tool-free 12 position single-turn LSC (Low Speed Compression) adjuster. - Independent firm mode circuit – Clockable 2 position adjuster. - Increased rebound adjuster range (over DPX2). - Optimized reservoir lengths per shock size. - Hydraulic top out feature. - Reduced damper noise. - Larger air sleeve bore reduces average rider pressure by 40 psi vs. DPX2. - Bearing hardware compatible both sides. - Air valve location offers improved frame fitment and pump access. Manufacturer's Part Numbers: 979-01-053 230 x 65mm Metric 979-01-054 185 x 52.5mm Trunnion 979-01-056 185 x 55mm Trunnion 979-01-058 205 x 60mm Trunnion 979-01-059 205 x 62.5mm Trunnion 979-01-041 190 x 45mm Metric 979-01-043 210 x 50mm Metric 979-01-045 210 x 52.5mm Metric 979-01-047 210 x 55mm Metric 979-01-049 230 x 57.5mm Metric 979-01-051 230 x 60mm Metric
Featuring a lightweight EVOL air spring, this mountain bike (MTB) rear shock offers fantastic responsiveness and sensitivity as you charge through the more demanding of terrain conditions. Fox Suspension has also equipped it with a Dual Piston valve design that improves both rebound and compression flow for a smoother ride. Part of the renowned Factory Series, this version has a genuine Kashima coating on its body and air sleeve, which offers enhanced lubrication and a harder wearing surface, resulting in increased shock smoothness and sensitivity on the trails. Factory Series MTB Rear Shock with DPS Damper Ready for wherever your next trail-riding adventure takes you, this MTB rear shock comes kitted out with a DPS damper to keep your ride under control. Its damper features three positions of adjustment, where you can choose from Open, Medium and Firm modes to tailor how you want it to respond to the terrain conditions. Fox Suspension has also equipped it with an Open mode adjust tuning range (1, 2, 3) as well as adjustable rebound and air spring pressure. This gives you everything you need to dial-in your ideal settings for rear suspension performance that matches your riding style as well as the terrain. Exceptional Bump Compliance Meets Exceptional Efficiency With a lightweight chassis, EVOL air spring, and dual piston damper with 3-position switch, the Fox Suspension Float DPS Factory Shock SV creates a pedal-friendly shock that soaks up the bumps and delivers pedal power to the ground with utmost efficiency. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. DPS damper with three positions - Open, Medium, Firm modes. Dual Piston valve design improves both rebound and compression flow. Lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivity. Manufacturer's Part Numbers: 972-01-475 Black 7.875 x 2.0" 972-01-476 Black 7.875 x 2.25" 972-01-474 Black 7.5 x 2.0"
This mountain bike (MTB) rear shock features a lightweight EVOL air spring, which offers fantastic responsiveness and sensitivity as you charge through the more demanding of terrain conditions. Fox Suspension has also equipped it with a Dual Piston valve design that improves both rebound and compression flow for a smoother ride. Part of the renowned Factory Series, this version has a genuine Kashima coating on its body and air sleeve, which offers enhanced lubrication and a harder wearing surface, resulting in increased shock smoothness and sensitivity on the trails. Factory Series MTB Rear Shock with DPS Damper Ready for wherever your next trail-riding adventure takes you, this MTB rear shock comes kitted out with a DPS damper to keep your ride under control. Its damper features three positions of adjustment, where you can choose from Open, Medium and Firm modes to tailor how you want it to respond to the terrain conditions. Fox Suspension has also equipped it with an Open mode adjust tuning range (1, 2, 3) as well as adjustable rebound and air spring pressure. This gives you everything you need to dial-in your ideal settings for rear suspension performance that matches your riding style as well as the terrain. Exceptional Bump Compliance Meets Exceptional Efficiency With a lightweight chassis, EVOL air spring, and dual piston damper with 3-position switch, the Fox Suspension Float DPS Factory Shock SV creates a pedal-friendly shock that soaks up the bumps and delivers pedal power to the ground with utmost efficiency. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. DPS damper with three positions - Open, Medium, Firm modes. Dual Piston valve design improves both rebound and compression flow. Lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivity. Manufacturer's Part Numbers: 972-01-497 Black 6.5 x 1.5" 972-01-498 Black 7.25 x 1.75" 972-01-477 Black 7.875 x 2.0"
Engineered for riders who want to go big, this Fox Float Factory mountain bike (MTB) suspension fork is part of Fox Suspension's renowned Factory Series and comes feature-packed to exceed the demands of Factory-level riders. Ready for fast enduro rides with a design that's built for speed, this model's genuine Kashima coating on its upper tubes makes it slippery smooth and ultra-durable as you conquer the most demanding of trail conditions. Boost Hub Spacing Thanks to its Boost axle spacing, the Fox Float suspension forks provide stronger and stiffer performance, while its Float EVOL air spring and GRIP2 damper with dual Variable Valve Control (VVC) make it easy to tweak it to match your riding style. Packing the same revolutionary features as the 36 model, while redefining what you think a long travel single crown fork is capable of, this enduro fork sets a new benchmark for confidence, performance, and durability. Welcome to the big time. Enduro Fork with GRIP2 Damper Fox Suspension's GRIP2 damper is the benchmark for unparalleled ride quality and ultra-precise adjustability. GRIP2 includes the brand's patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance. GRIP2 achieves with the twist of a knob what typically requires the time-consuming and complicated task of completely disassembling and reassembling the fork. Float EVOL Air Spring EVOL technology increases negative air spring volume, optimizing small bump sensitivity. EVOL’s linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's Lower Leg channels and Bleeders, which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Adjustments: High-speed compression (with VVC) 8 clicks. Low-speed compression 16 clicks. High-speed rebound (with VVC) 8 clicks. Low-speed rebound 16 clicks. Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don’t want to bother with it, you can just install the front wheel and get on with your ride. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Bleeders: Fox Suspension's lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button. Pressure build-up in the lower legs dramatically decreases fork performance, preventing full travel from being achieved, and diminishing small bump sensitivity and responsiveness. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's all-new lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material. Elliptical Steerer: The 38’s elliptical steer tube is one of many ways Fox Suspension has further optimized stiffness-to-weight, placing more material only where it is needed, and eliminating every ounce of it where it’s not. Manufacturer's Part Numbers: 910-21-031 Black 27.5" QR110 170mm 44mm 910-21-028 Black 27.5" QR110 180mm 44mm 910-21-027 Black 27.5" QR110 180mm 37mm 910-20-201 Orange 27.5" QR110 170mm 44mm 910-21-025 Black 29" QR110 160mm 51mm 910-21-020 Black 29" QR110 180mm 44mm 910-21-024 Black 29" QR110 160mm 44mm 910-21-022 Black 29" QR110 170mm 44mm 910-20-200 Orange 29" QR110 170mm 44mm
Packing the same revolutionary features as the 36 model while redefining what you think a long travel single crown fork is capable of, this enduro fork sets a new benchmark for confidence, performance, and durability. Part of Fox Suspension's Performance Series, it features a high-quality anodised finish on its upper tubes for extra durability as well as protection against corrosion during wet riding conditions. Another highlight is it comes equipped with a Float EVOL air spring and a GRIP damper with three-position on-the-fly adjustability. This makes it simple to dial in your favourite settings, so your suspension matches your riding style as well as the terrain conditions. Also benefitting from Boost axle spacing for increased stiffness and strength, plus many of the brand's finest technologies, this model is ready for hard-hitting enduro rides. Enduro Fork with Float EVOL Air Spring EVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL’s linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's Lower Leg channels and Bleeders (push-button bleeders available separately), which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference. FIT GRIP Damper Inspired from moto, the GRIP damper uses Fox Suspensions FIT sealed cartridge technology combined with a coil-sprung, independent floating piston. GRIP allows excess oil to purge through specially designed ports at the top of the damper to maintain consistent damping and increase durability. Technologies: Performance Series: Performance Series forks retain the same black anodized 7000 series aluminium upper tubes as Performance Elite, except paired with a GRIP damper. Push-button bleeders are not included but can be purchased separately. Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional micro-adjust between settings Detents. Low-speed rebound 10 clicks. Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don’t want to bother with it, you can just install the front wheel and get on with your ride. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material. Elliptical Steerer: The 38’s elliptical steer tube is one of many ways we’ve further optimized stiffness-to-weight, placing more material only where it is needed, and eliminating every ounce of it where it’s not. - 58mm crown diameter to match modern frame shape profiles. - Optional mudguard with sturdy and seamless 4-point direct-mount attachment protects upper tubes and dust wipers from dirt and debris (available separately). - 31% stiffer transverse shear, 9% stiffer fore/aft and 20% torsionally stiffer than the 36 model. Manufacturer's Part Numbers: 910-21-029 Black 27.5" QR110 170mm 44mm 910-21-021 Black 29" QR110 170mm 44mm
Engineered for handling the intensity of enduro racing, this high-quality suspension fork is part of the distinguished Performance Elite series which includes the same adjustments, features, dampers, weight, and 7000 series aluminium upper tubes as Factory Series. The difference is this model's upper tubes feature a hard-wearing anodised finish, which offers fantastic protection against corrosion during wet riding conditions. Fox Suspension has also kitted out this version with Boost axle spacing, making it ideal for modern enduro racing as it delivers additional stiffness as you dominate your way from the top of the mountain to the bottom. To top it off, it comes complete with a lightweight Float EVOL air spring and a GRIP2 damper with dual Variable Valve Control (VVC) for a wide range of tuneability. Packing the same revolutionary feature set as the 36 model, the 38 redefines what you think a long travel single crown fork is capable of, and sets a new benchmark for confidence, performance, and durability. Welcome to the big time. GRIP2 Damper with Dual Variable Valve Control (VVC) Fox Suspension's GRIP2 damper is the benchmark for unparalleled ride quality and ultra-precise adjustability. GRIP2 includes the brand's patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance. GRIP2 achieves with the twist of a knob what typically requires the time-consuming and complicated task of completely disassembling and reassembling the fork. Enduro Fork with Float EVOL Air Spring EVOL technology increases negative air spring volume, optimizing small bump sensitivity. EVOL’s linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's Lower Leg channels and Bleeders, which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference. Technologies: Performance Elite Series: Performance Elite forks retain the same adjustments, features, dampers, weight, and 7000 series aluminum upper tubes as Factory Series, but have black anodized stanchions instead of Genuine Kashima Coat. Adjustments: High-speed compression (with VVC) 8 clicks. Low-speed compression 16 clicks. High-speed rebound (with VVC) 8 clicks. Low-speed rebound 16 clicks. Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever-operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don’t want to bother with it, you can just install the front wheel and get on with your ride. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Bleeders: Fox Suspension's lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button. Pressure build-up in the lower legs dramatically decreases fork performance, preventing full travel from being achieved, and diminishing small bump sensitivity and responsiveness. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's all-new lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material. Elliptical Steerer: The 38’s elliptical steer tube is one of many ways we’ve further optimized stiffness-to-weight, placing more material only where it is needed, and eliminating every ounce of it where it’s not. Manufacturer's Part Numbers: 910-21-030 Black 27.5" QR110 170mm 44mm 910-21-023 Black 29" QR110 170mm 44mm
This MTB fork features a Float EVOL air spring and a FIT GRIP damper with three positions of adjustment, so you can set it up to perfectly match your riding style as well as the terrain. Fox Suspension has also equipped this model with a lightweight yet robust chassis for a superior strength to weight ratio. Item Top Features Continued: Travel: 140mm Remote Operated: No Lever Operated: Yes Lockout: No Part Numbers: 29", 51mm Offset: 910-20-968; 27.5", 44mm Offset: 910-20-987; 29", 44mm Offset: 910-20-969
Part of Fox Suspension's Performance Series, this XC suspension fork is equipped with a high-quality anodised finish on its upper tubes for extra durability and protection against corrosion during wet racing conditions. It's also kitted out with Boost axle spacing for additional stiffness as you charge across the most demanding of terrain conditions. Thanks to its Float EVOL air spring and FIT GRIP damper with a three-position lever, this model provides you with a wide range of adjustment features so you can easily tweak it to fit in with your riding style. Another highlight is its lockout feature that delivers increased efficiency, making it a dependable choice of upgrade for modern XC racing. XC Fork with Step-Cast Design 32 SC is the ultralightweight cross-country racing weapon. The Step-Cast's pioneering lower leg shape isn't just for looks, its narrow stance and stepped design saves weight, decreases frontal area, and provides clearance for the spokes and brake rotor. The 32 SC features 32mm upper tubes and ample bushing overlap for a quality ride and the hollowed-out lower legs provide even more weight savings. Optimised for 100mm of travel, the Step-Cast lower leg design and narrow crown spacing save weight while the 32mm upper tubes maintain FOX ride quality. Starting at 1387g, the 32 Step-Cast (SC) fork is classed by Fox Suspension as its lightest cross-country fork ever. FIT GRIP Damper with 3-Position Lever Inspired from moto, the GRIP damper uses Fox Suspension's FIT sealed cartridge technology combined with a coil-sprung, independent floating piston. GRIP allows excess oil to purge through specially designed ports at the top of the damper to maintain consistent damping and increase durability. Technologies: Performance Series: Performance Series forks retain the same black anodized 7000 series aluminum upper tubes as Performance Elite, except paired with a GRIP damper. Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional micro-adjust between settings Detents. Low-speed rebound 10 clicks. Manufacturer's Part Numbers: 910-20-231 Black 27.5 QR110 100mm 44mm 910-20-227 Black 29 QR110 100mm 44mm 910-20-226 Black 29 QR100 100mm 51mm 910-20-224 Black 29 QR110 100mm 51mm 910-20-225 Black 29 QR100 100mm 44mm
Prepared for everything from backcountry adventures to day-long epics on your favourite mountain bike (MTB) trails, this suspension fork is engineered for the demands of modern trail riding. It's part of Fox Suspension's renowned Factory Series, which means that it comes feature-packed and is designed to exceed the demands of Factory-level riders. Another highlight is its genuine Kashima coating on its upper tubes that provides slippery smooth and ultra-durable performance as you carve your way around the mountain. Boasting a wide range of adjustments from its Float EVOL air spring and GRIP2 damper with dual Variable Valve Control (VVC), this model makes it simple to dial in your ideal settings for smooth shock absorption and control on your ride. MTB Fork with Float EVOL Air Spring EVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL’s linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's Lower Leg channels and Bleeders, which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference. GRIP2 Damper Fox Suspension's GRIP2 damper is the benchmark for unparalleled ride quality and ultra-precise adjustability. GRIP2 includes the brand's patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance. GRIP2 achieves with the twist of a knob what typically requires the time-consuming and complicated task of completely disassembling and reassembling the fork. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Adjustments: High-speed compression (with VVC) 8 clicks. Low-speed compression 16 clicks. High-speed rebound (with VVC) 8 clicks. Low-speed rebound 16 clicks. Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don’t want to bother with it, you can just install the front wheel and get on with your ride. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Bleeders: Fox Suspension's lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button. Pressure build-up in the lower legs dramatically decreases fork performance, preventing full travel from being achieved, and diminishing small bump sensitivity and responsiveness. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's all-new lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material. Manufacturer's Part Numbers: 910-20-235 Black 29" QR110 160mm 51mm 910-20-234 Orange 29" QR110 160mm 44mm 910-20-233 Black 29" QR110 160mm 44mm 910-20-242 Black 27.5" QR110 160mm 44mm 910-20-241 Black 27.5" QR110 160mm 37mm 910-20-240 Orange 27.5" QR110 160mm 44mm 910-20-236 Black 29" QR110 150mm 44mm
Specifically tailored for the rigours of cross country racing, this mountain bike (MTB) suspension fork features Fox Suspension's prestigious Step Cast chassis. Its Step Cast design offers a pioneering lower leg shape that isn’t just for looks, its narrow stance and stepped design saves weight, decreases frontal area, and provides clearance for the spokes and brake rotor. Ready for the most demanding of XC racing situations, this version is also kitted out with a lightweight Float EVOL air spring and a FIT4 2-position remote actuated damper (remote sold separately) for easy adjustment and fine-tuning to match your riding style. Part of the brand's renowned Factory Series, this model comes complete with a genuine Kashima finish on its upper tubes for slippery smooth, ultra-durable performance as you race for the podium. FIT4 2-Position Remote In its fourth generation, Fox Suspension's patented FIT4 closed cartridge system provides two on-the-fly compression damping positions (Open and Firm) to adapt to varying trail conditions. Factory Series forks feature an additional 22 clicks of low-speed compression adjust in the Open mode, allowing riders to fine-tune their exact damping preferences. Lightweight Float Air Spring System This model's Float EVOL air spring automatically equalises the positive and negative air chambers for increased sensitivity and traction, regardless of the air pressure setting. Riders can fine-tune the characteristics of the positive air spring by using volume spacers. Please note: A remote is sold separately for this product. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Adjustments: Two on-the-fly compression damping positions Open, Firm. Additional low-speed compression (Open mode adjust) 22 clicks. Low-speed rebound 10 clicks. Lightweight FIT4 Closed Cartridge System: Lightweight version of Fox Suspension's patented FIT4 closed cartridge system. The weight-optimised design uses a detailed aluminium piston, intricate material removal and consolidated parts design to make it lighter. Narrow Chassis: The chassis is 10mm narrower than the typical 32 design. Shorter Upper Tube Length: The shorter upper tube length raises the floor of the magnesium lower leg, creating a hollow lower section and a lighter overall system. Manufacturer's Part Numbers: 910-21-041 Black 27.5" KB100 100mm 44mm 910-21-040 Black 27.5" KB110 100mm 44mm 910-21-038 Black 29" KB110 100mm 44mm 910-21-036 Black 29" KB110 100mm 51mm 910-21-035 Orange 29" KB110 100mm 44mm 910-21-034 Orange 29" KB110 100mm 51mm 910-21-039 Black 29" KB100 100mm 44mm 910-21-037 Black 29" KB100 100mm 51mm
Specifically designed for XC racing, this high-quality suspension fork is part of Fox Suspension's renowned Factory Series with a build that's feature-packed and engineered to exceed the demands of Factory-level riders. It's equipped with an updated chassis that's 15% stiffer than the 32 standard model as well as a revised arch shape that offers improved head tube clearance with shorter rakes. Developed from the ground up to deliver uncompromised cross country racing performance, it's also kitted out with a Float EVOL air spring and a FIT4 3-Position damper for a high level of tuneability and control. Coming complete with a genuine Kashima upper tube coating that's slippery smooth and ultra-durable, this is a great choice of upgrade for dependable front-end suspension performance on the most demanding of racing conditions. Float EVOL Air Spring Returning with the same legendary suppleness and longevity, the EVOL air spring in 34’s now has an enlarged negative air spring to assist with mid-stroke support. The 34 SC also comes with the option to tune the negative air spring with a volume spacer. FIT4 3-Position Damper In its fourth generation, Fox Suspension's patented FIT4 closed cartridge system provides three on-the-fly compression damping positions (Open, Medium, and Firm) to adapt to varying trail conditions. Factory Series forks feature an additional 22 clicks of low-speed compression adjust in the Open mode, allowing riders to fine-tune their exact damping preferences. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional low-speed compression (Open mode adjust) 22 clicks, Low-speed rebound 10 clicks. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. The all-new 34 pulls out all the stops, shaving every possible gram while making sure not to compromise the stiffness or strength requirements of modern trail riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design is designed to pair perfectly with modern trail bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material. Manufacturer's Part Numbers: 910-21-059 Black 29" 100mm 44mm 910-21-058 Black 29" 100mm 51mm 910-21-061 Orange 29" 100mm 44mm 910-21-044 Black 29" 120mm 51mm 910-21-043 Black 29" 120mm 44mm 910-21-042 Orange 29" 120mm 44mm
Prepared for wherever your next trail-riding adventure takes you, this mountain bike (MTB) suspension fork is feature-packed and designed to exceed the demands of Factory-level riders. Part of Fox Suspension's distinguished Factory Series, this model boasts a genuine Kashima coating on its upper tubes for amazingly smooth, ultra-durable performance. Another highlight is it also benefits from a lightweight Float EVOL air spring as well as a FIT4 damper with quick on-the-fly three-position adjust. Its wide range of adjustments means that you can easily fine-tune your front-end suspension to match your riding style as well as the terrain conditions. With three compression damping positions (Open, Medium and Firm), additional low-speed compression (Open mode adjust) and low-speed rebound, this trail fork is more tuneable and capable than ever before. Trail Fork with Float EVOL Air Spring Returning with the same legendary suppleness and longevity, the EVOL air spring in 34’s now has an enlarged negative air spring to assist with mid-stroke support. FIT4 Damper In its fourth generation, Fox Suspension's patented FIT4 closed cartridge system provides three on-the-fly compression damping positions (Open, Medium, and Firm) to adapt to varying trail conditions. Factory Series forks feature an additional 22 clicks of low-speed compression adjust in the Open mode, allowing riders to fine-tune their exact damping preferences. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional low-speed compression (Open mode adjust) 22 clicks. Low-speed rebound 10 clicks. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. The all-new 34 pulls out all the stops, shaving every possible gram while making sure not to compromise the stiffness or strength requirements of modern trail riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design is designed to pair perfectly with modern trail bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material. Manufacturer's Part Numbers: 910-21-010 Black 29" QR110 130mm 51mm 910-21-007 Black 29" QR110 130mm 44mm 910-21-005 Black 29" QR110 140mm 51mm 910-21-002 Black 29" QR110 140mm 44mm