Following the incredible popularity of the REFLECT360 dog coat, we were asked by our customers for another model that features a blend of 'Hi-viz' and REFLECT360 materials. The Classic Waterproof Dog Coat features a blend of waterproof 'Hi-viz' material that is ideal for keeping your dog dry on those wintry and wet days but also the fluorescent nature of the material helps to keep your dog more visible by day if you are out on the roads by day. The REFLECT360 reflective strips down the side of the coat reflect light when you are out in the dark. When a vehicle's headlight shine on the material it appears bright white making your dog more easily seen. This model is a perfect hybrid for those out walking their dogs at dusk when you need a mix of fluorescent and reflective materials.
Due to the amazing popularity of the REFLECT360 range for cyclists, runners and walkers, we were asked by many customers if we could design a REFLECT360 waterproof dog coat. We were struck by one email from a customer saying that he was walking his dog at night when his dog slipped his leash and ran in to the road. The owner ran after his dog in to the road and fortunately for the owner he was wearing his own REFLECT360 outdoor coat. According to the drivers of the vehicles stopping in front of him, it was the jacket that saved his dogs life as the drivers saw his jacket reflecting and therefore stopped immediately but could not see the dog. The owner of the dog emailed us the story and asked to design a jacket like his but for his dog....and so we did. The new fleece-lined version of the REFLECT360 waterproof dog jacket is the same as the original version without fleece lining.100% reflective and utilises the same material as the rest of the best-selling range. The covers come in 5 sizes for dogs of almost all shapes and sizes and has a harness hole so the dog jacket can go over the top of your dogs harness. During daylight it is a modest grey colour, and at night, when the fabric picks up an external light source eg. vehicle headlights or a torch, it gives astonishing reflectivity so your dog is more easily seen.
The cage is made from carbon fibre and reinforced PA while the 17-tooth pulley wheels are made from aluminium and mounted with high quality CeramicSpeed coated bearings. The revolutionary OSPW System is mounted with CeramicSpeed coated bearings, which means it has undergone a special coating treatment to provide even more protection and lower friction. A very thin protective coating is applied to the bearing races, which further increase the resistance to corrosion or damage from foreign objects. The OSPW has been tested and confirmed to be the world’s fastest pulley wheel system, therefore enhancing your performance with free speed, which gives you a more efficient drivetrain. Like all other products delivered by CeramicSpeed, this product has undergone a thorough testing program and is used by professional triathletes Tim Don and Tyler Butterfield. Maintenance It’s important that you properly lubricate your bearings in order to ensure optimal performance and maximum longevity. Add oil to the outside of the bearing seal, so that oil can penetrate the bearing. Do this when you lubricate your chain, or if you have washed your bike or have been riding in wet or muddy conditions. Size Information 101638 Black 17T Shimano 10/11 9000/6800 101651 Black 17/17T SRAM eTap 101661 Black 17T SRAM RED/Force 10/11 Mechanical fits up to 32-tooth cassettes 104063 Black 13/19T Campagnolo 11s EPS/Mechanical fits up to 32-tooth cassettes ** 101643 Red 17T Shimano 10/11 9000/6800 101655 Red 17/17T SRAM eTap 101665 Red 17T SRAM RED/Force 10/11 Mechanical fits up to 32-tooth cassettes 104064 Red 13/19T Campagnolo 11s EPS/Mechanical fits up to 32-tooth cassettes ** (**Not compatible with Campagnolo 12-speed Record and Super Record derailleurs)
Popular amongst both performance orientated riders and those just looking for something a little different.
Popular amongst both performance-orientated MTB riders and those just looking for something a little different, the Hope floating rotor is suitable for performance-oriented riders and those seeking a new alternative disc brake rotor.
Zone3 Swim Safety Belt with Tow Float Pouch comes with a bright and highly visible buoy that is quick and easy to inflate and can instantly keep you seen above the water. The belt comes with a comfortable fit with complete adjustability and includes a pouch for your essential kit.
The pulley wheels are the fastest spinning bearings on your bike, making an upgrade to CeramicSpeed an effective way to save you precious energy. They are extremely wear resistant and will outlive any pulley you have previously ridden. Titanium pulley wheels are extremely resistant to wear. This makes them a great choice if you ride in demanding conditions or just ride a lot. To give even greater protection and reduced friction, a super thin protective coating is applied to the bearing races. This further increases the resistance of the bearing to corrosion or damage from foreign objects. Combining coated bearing races with a titanium pulley wheel creates a pulley wheel with extreme properties in terms of wear resistance and performance. CeramicSpeed titanium pulley wheels are specially designed to reduce friction to an absolute minimum, virtually eliminating the drag associated with standard pulley wheels. The special design helps guide the chain in its ideal line and perform super smooth shifting.
Designed to minimise friction, increase wear and improve the overall performance of your front fork, this pack of seals is an excellent addition to your fork's air spring. Manufacturer Part Numbers: Black n/a n/a: 803-00-963
This Fox Float DPX2 Factory MTB shock features a completely revised base valve design with 10 clicks of compression adjustability that's combined with an EVOL air sleeve for superior responsiveness and sensitivity. Coming complete with a stunning genuine Kashima coating and updated graphics, this is a perfect upgrade for smoother and more reliable performance. Technologies: Float DPX2 Damper: X2 small bump sensitivity meets DPS lightweight and simplicity. Three-position lever with adjustable Open Mode offers 10 clicks to fine-tune compression. Recirculating oil damper design for more control. EVOL Air Sleeve: Lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivity. Manufacturer Part Numbers: 190mm, 45mm Stroke: 973-01-314 210mm, 50mm Stroke: 973-01-315 210mm, 52.5mm Stroke: 973-01-316 210mm, 55mm Stroke: 973-01-317 230mm, 65mm Stroke: 973-01-312 230mm, 60mm Stroke: 973-01-313 185mm, 44mm Stroke: 973-01-318 190mm, 50mm Stroke: 973-01-304 200mm, 50mm Stroke: 973-01-305 200mm, 57mm Stroke: 973-01-306 215mm, 65mm Stroke: 973-01-307
Part of Fox Suspension's renowned Factory Series, this mountain bike (MTB) rear shock is equipped with a stunning genuine Kashima coating that offers slippery smooth performance, increased durability on the more demanding of terrains, and also complements your ride with its eye-catching finish. Adjustable Rear Shock with Variable Valve Control (VVC) Coming feature-packed with a design that's intended to exceed the demands of Fox Suspension's Factory-level riders, this rear shock is kitted out with a two-position lever. Developed for ease of use, its lever makes it simple to switch between open and firm modes to suit the terrain or course conditions on your ride. Another highlight is its range of adjustment features that include high and low-speed compression as well as high and low-speed rebound. This version is also equipped with Variable Valve Control (VVC) for improved high-speed rebound tunability. As a result, you'll be able to dial in your ideal settings to match your riding style and enjoy more rider-tuned rear suspension performance. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Updated Damper: The Float X2's 4-way adjustable, twin-tube architecture now features patented Variable Valve Control (VVC) technology on the high-speed rebound circuit for unrivalled external fine-tuning. Updated compression ratios and a MCU bumper deliver improved progressivity and bottom-out control with fewer volume spacers. Independent Firm Mode Circuit: A 2-position switch operates on an independent circuit, providing a notably firmer lockout than before, allowing for efficient climbing and wide-open descending. Updated Chassis: Float X2's entirely revised chassis features an ultra-low friction hard chrome damper shaft, updated low-friction bushings and seals, and genuine Kashima coated outer body for smoother performance than ever before. High-flow main piston. Improved bearing ratio for metric sizes. Increased control and decreased harshness via linear damping. Reduced length reservoir for better fit on more frames. Finned inner body for improved structural rigidity and reduced hysteresis. Matching 8-click HSC and HSR adjustment on GRIP2 forks and X2 shocks. Updated compression ratios, 300psi max.
Designed to exceed the demands of Fox Suspension's Factory-level riders, this Factory Series mountain bike (MTB) rear shock is kitted out with a genuine Kashima coating that provides increased durability, silky smooth operation and an eye-catching finish that complements any ride. EVOL Air Spring and Adjustments The Float DPS helps you make perfect turns without cutting corners by using a dual-piston system that pairs exceptional bump compliance with efficiency to conserve energy for when you need it most. It's also kitted out with a one-piece EVOL air spring that improves responsiveness and sensitivity, while its range of adjustment features allow you to easily fine-tune its suspension performance. Thanks to its remote actuation, you can effortlessly switch between open and firm modes to match the terrain conditions. This model is also equipped with adjustable rebound and air spring pressure, so you can dial-in your ideal settings for a more rider-tuned feel. The Fox Suspension Float DPS Factory Remote Shock's lightweight chassis, EVOL air spring, and dual-piston (DPS) damper create a pedal-friendly shock that soaks up the bumps and delivers pedal power to the ground with utmost efficiency. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Updated graphics. Dual Piston valve design improves both rebound and compression flow. Lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivity. Manufacturer's Part Numbers: 972-01-509 Black 6.5x1.5" 972-01-512 Black 7.25x1.75" 972-01-508 Black 7.5x2.0"
This mountain bike (MTB) rear shock is part of Fox Suspension's Performance Series and features a hard-wearing anodised finish for excellent durability and corrosion resistance on your ride. This model is also equipped with a lightweight one-piece EVOL air spring, which ensures you'll benefit from its improved responsiveness and sensitivity as it absorbs the sudden knocks and bumps associated with trail-riding. DPS Damper and Adjustments This trail-ready rear shock is kitted out with a dual-piston system (DPS) damper that pairs exceptional bump compliance with efficiency, helping you conserve energy for when you need it most. Its damper uses a three-position lever to allow you to easily switch between its open, medium and firm modes. Fox Suspension has also equipped this model with an open mode adjust tuning range (1, 2, 3), rebound and air spring pressure adjustments, so you can fine-tune your rear suspension to fit in with your riding style as well as the terrain conditions. Technologies: DPS damper with three positions - Open, Medium, Firm modes. Dual Piston valve design improves both rebound and compression flow. Lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivity. Manufacturer's Part Numbers: 972-01-489 Black 7.5x2.0" 972-01-490 Black 7.875x2.0" 972-01-491 Black 7.875x2.25"