Nukeproof Enduro ABEC5 V2 MTB Hub Bearings (61805)These bearings are specifically designed for use with the Nukeproof Horizon and Neutron V2 range of wheels. They feature hard-wearing, high carbon chromium alloy races with graphic/nylon ball retainers. This makes them incredibly durable and more than capable of handling all the intensity that comes with shredding the mountain bike trails. These superb bearings set the benchmark for high precision bearings.ABEC-5 LinePart of an updated ABEC-5 line of wheel hub bearings, these 6805 / 61805 bearings are the revised LLU/LLB dual seal model. The ABEC-5 Dual Seal bearing places a LLU full contact seal on the outside facing surface of the bearing, while the Inboard facing LLB medium contact seal offers less drag. Their specific seal increases the lifespan of the bearings and offers excellent performance. High precision balls are within 5/1,000,000″ round. These are military level specification, used for precision equipment. R-64 hardness, of the highest grade.The Nukeproof Enduro 61805 ABEC5 V2 Hub Bearing Pair is only suitable for converting the front hub of the Nukeproof Horizon V2 and Neutron V2 from 15mm to 20mm axles.These bearings will also fit many other hubs which use this size of bearing.Features: Material: High Carbon Chromium Alloy Races with Graphite/Nylon Ball Retainers Bearing Code: 6805 / 61805 Dimensions: 25x37x7mm ABEC: 5 Grade: 10 Seals: LLU/LLB Grease: Mobil XHP 222 Nukeproof Part Number: NUKHORV261805P Approx Weight: 20.4gBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon V2 Rear AxleThis MTB axle is specifically designed as a direct replacement for the original rear axle that comes with Nukeproof Horizon V2 hubs. This rear axle is available in 142mm, 148mm and 150mm axle options. You will need to choose the correct axle to suit your hub spacing.Features: Use: MTBCompatibility: Replacement axle for Nukeproof Horizon V2 hubsNukeproof Part Numbers: 142mm: NUKHORV2142AXLE; 148mm: NUKHORV2148AXLE and 150mm: NUKHORV2150AXLEBuy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon V2 Rear AxleThis MTB axle is specifically designed as a direct replacement for the original rear axle that comes with Nukeproof Horizon V2 hubs. This rear axle is available in 142mm, 148mm and 150mm axle options. You will need to choose the correct axle to suit your hub spacing.Features: Use: MTBCompatibility: Replacement axle for Nukeproof Horizon V2 hubsNukeproof Part Numbers: 142mm: NUKHORV2142AXLE; 148mm: NUKHORV2148AXLE and 150mm: NUKHORV2150AXLEBuy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon V2 Rear AxleThis MTB axle is specifically designed as a direct replacement for the original rear axle that comes with Nukeproof Horizon V2 hubs. This rear axle is available in 142mm, 148mm and 150mm axle options. You will need to choose the correct axle to suit your hub spacing.Features: Use: MTBCompatibility: Replacement axle for Nukeproof Horizon V2 hubsNukeproof Part Numbers: 142mm: NUKHORV2142AXLE; 148mm: NUKHORV2148AXLE and 150mm: NUKHORV2150AXLEBuy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Neutron V2 Pawls & SpringsThese pawls and springs are designed as a direct replacement for the ones that come as standard on Nukeproof Neutron V2 hubs. This set contains four pawls and four springs, plus a plastic cover for the freehub.Features: Use: MTB Compatibility: Nukeproof Neutron V2 hubs Included: 4x pawls, 4x springs and a plastic cover for the freehub Nukeproof Part Number: NUKNEUV2PSGOLDBuy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon V2 Freehub Body 102tThis freehub body is engineered for directly replacing the freehub body that comes with Nukeproof Horizon V2 hubs. It features a hard-wearing alloy construction, which makes it ideal at handling all the abuse that's associated with fast and intense MTB rides. Perfect for replacing your old or worn-out existing freehub body, it allows for quick and easy installation.Please Note: This freehub is only compatible with Nukeproof Horizon V2 hubs.Options: Shimano HG Shimano Microspline SRAM XDA new hub seal and bushing is supplied with Nukeproof freehubs.Please Note: The new hub seal will be fitted to the freehub for transport purposes. This needs to be removed from the freehub by pressing the pawls BEFORE fitting the freehub.Microspline freehubs also include the driveside end cap so you can easily convert an HG / XD hub to microspline.If you are converting a microspline hub to XD or HG, you will also require a new driveside end cap.Click here for step by step fitting instructions.FreehubsInstallation Instructions:1. Remove driveside end cap2. Pull off old freehub turning anticlockwise as you pull3. Check hub seal for damage, if it is damaged remove the seal4. If seal was removed, press on new seal5. Apply grease hub ratchet ring6. Apply thin grease to freehub pawls & springs then push onto hub shell turning anticlockwise7. Refit driveside end capFeatures: Material: Alloy Pawl: 6-Pawl Hub Compatibility: Horizon V2 Cassette Compatibility: Shimano HG - 9, 10, 11 and 12 Shimano HG spline cassettes; SRAM XD - SRAM Eagle XD cassettes and Shimano Microspline - Shimano microspline cassettes Points of Engagement: 102 Nukeproof Part Numbers: Shimano HG Freehub: NUKHORV2102TFHHG; SRAM XD Freehub: NUKHORV2102TFHXD and Shimano Microspline Freehub: NUKHORV2102TFHMSBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon V2 Freehub Body 102tThis freehub body is engineered for directly replacing the freehub body that comes with Nukeproof Horizon V2 hubs. It features a hard-wearing alloy construction, which makes it ideal at handling all the abuse that's associated with fast and intense MTB rides. Perfect for replacing your old or worn-out existing freehub body, it allows for quick and easy installation.Please Note: This freehub is only compatible with Nukeproof Horizon V2 hubs.Options: Shimano HG Shimano Microspline SRAM XDA new hub seal and bushing is supplied with Nukeproof freehubs.Please Note: The new hub seal will be fitted to the freehub for transport purposes. This needs to be removed from the freehub by pressing the pawls BEFORE fitting the freehub.Microspline freehubs also include the driveside end cap so you can easily convert an HG / XD hub to microspline.If you are converting a microspline hub to XD or HG, you will also require a new driveside end cap.Click here for step by step fitting instructions.FreehubsInstallation Instructions:1. Remove driveside end cap2. Pull off old freehub turning anticlockwise as you pull3. Check hub seal for damage, if it is damaged remove the seal4. If seal was removed, press on new seal5. Apply grease hub ratchet ring6. Apply thin grease to freehub pawls & springs then push onto hub shell turning anticlockwise7. Refit driveside end capFeatures: Material: Alloy Pawl: 6-Pawl Hub Compatibility: Horizon V2 Cassette Compatibility: Shimano HG - 9, 10, 11 and 12 Shimano HG spline cassettes; SRAM XD - SRAM Eagle XD cassettes and Shimano Microspline - Shimano microspline cassettes Points of Engagement: 102 Nukeproof Part Numbers: Shimano HG Freehub: NUKHORV2102TFHHG; SRAM XD Freehub: NUKHORV2102TFHXD and Shimano Microspline Freehub: NUKHORV2102TFHMSBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon V2 Freehub Body 102tThis freehub body is engineered for directly replacing the freehub body that comes with Nukeproof Horizon V2 hubs. It features a hard-wearing alloy construction, which makes it ideal at handling all the abuse that's associated with fast and intense MTB rides. Perfect for replacing your old or worn-out existing freehub body, it allows for quick and easy installation.Please Note: This freehub is only compatible with Nukeproof Horizon V2 hubs.Options: Shimano HG Shimano Microspline SRAM XDA new hub seal and bushing is supplied with Nukeproof freehubs.Please Note: The new hub seal will be fitted to the freehub for transport purposes. This needs to be removed from the freehub by pressing the pawls BEFORE fitting the freehub.Microspline freehubs also include the driveside end cap so you can easily convert an HG / XD hub to microspline.If you are converting a microspline hub to XD or HG, you will also require a new driveside end cap.Click here for step by step fitting instructions.FreehubsInstallation Instructions:1. Remove driveside end cap2. Pull off old freehub turning anticlockwise as you pull3. Check hub seal for damage, if it is damaged remove the seal4. If seal was removed, press on new seal5. Apply grease hub ratchet ring6. Apply thin grease to freehub pawls & springs then push onto hub shell turning anticlockwise7. Refit driveside end capFeatures: Material: Alloy Pawl: 6-Pawl Hub Compatibility: Horizon V2 Cassette Compatibility: Shimano HG - 9, 10, 11 and 12 Shimano HG spline cassettes; SRAM XD - SRAM Eagle XD cassettes and Shimano Microspline - Shimano microspline cassettes Points of Engagement: 102 Nukeproof Part Numbers: Shimano HG Freehub: NUKHORV2102TFHHG; SRAM XD Freehub: NUKHORV2102TFHXD and Shimano Microspline Freehub: NUKHORV2102TFHMSBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Neutron V2 End CapsThese end caps are specifically designed for use with Nukeproof Neutron V2 wheelsets. They can be used to convert your hub to a different spacing or replace a lost cap. Click here for fitting instructions.Please use the table below to determine which hubs can be converted as the caps only fit the original specific hub options. Caps Nukeproof Part Number Usage Front 9mm QR NUKNEUV2F9QRCAPS Convert 15mm non boost hub to QR Not compatible with the 20mm non boost hub shell Front 12mm Caps NUKNEUV2F12CAPS Convert 15mm hub shell to 12mm Front 15mm Caps NUKNEUV2F15CAPS Replacement 15mm end caps Not compatible with the 20mm hub shell Front 20mm Caps NUKNEUV2F20CAPS Replacement 20mm end caps Not compatible with the 15mm hub shell Front 15mm Rockshox Torque caps NUKNEUV2ENDB15T Convert 15mm boost hub for Rockshox Torque dropouts Front 20mm to 15mm boost conversion NUKNEUV2END2015B Convert 20mm boost hub to 15mm boost Front 20mm to 15mm non boost conversion NUKNEUV2END2015NB Convert 20mm non boost hub to 15mm non boost Rear 135mm QR conversion NUKNEUV2R135CAPS Convert 142mm non boost hub to 135mm QR Rear 141mm conversion NUKNEUV2R141BCAPS Convert 148mm boost HG / XD hub to 141mm Boost QR Not compatible with microspline freehubs Rear 142/148/157mm caps NUKNEUV2R148CAPS Replacement 142mm, 148mm & 157mm end caps Not compatible with microspline freehubs Rear 150mm caps NUKNEUV2R150CAPS Replacement 150mm end caps End Caps:Changing end caps is simple and no tools are required. Just pull off the end caps on the hub and then push the new ones on. Where the end caps are not identical, the non-driveside always has the wider flange to cover the bearing. All caps sold as pairs and only compatible with Nukeproof Neutron V2 hubs.Features: Use: MTB Compatibility: Nukeproof Neutron V2 hubsBuy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Neutron V2 End CapsThese end caps are specifically designed for use with Nukeproof Neutron V2 wheelsets. They can be used to convert your hub to a different spacing or replace a lost cap. Click here for fitting instructions.Please use the table below to determine which hubs can be converted as the caps only fit the original specific hub options. Caps Nukeproof Part Number Usage Front 9mm QR NUKNEUV2F9QRCAPS Convert 15mm non boost hub to QR Not compatible with the 20mm non boost hub shell Front 12mm Caps NUKNEUV2F12CAPS Convert 15mm hub shell to 12mm Front 15mm Caps NUKNEUV2F15CAPS Replacement 15mm end caps Not compatible with the 20mm hub shell Front 20mm Caps NUKNEUV2F20CAPS Replacement 20mm end caps Not compatible with the 15mm hub shell Front 15mm Rockshox Torque caps NUKNEUV2ENDB15T Convert 15mm boost hub for Rockshox Torque dropouts Front 20mm to 15mm boost conversion NUKNEUV2END2015B Convert 20mm boost hub to 15mm boost Front 20mm to 15mm non boost conversion NUKNEUV2END2015NB Convert 20mm non boost hub to 15mm non boost Rear 135mm QR conversion NUKNEUV2R135CAPS Convert 142mm non boost hub to 135mm QR Rear 141mm conversion NUKNEUV2R141BCAPS Convert 148mm boost HG / XD hub to 141mm Boost QR Not compatible with microspline freehubs Rear 142/148/157mm caps NUKNEUV2R148CAPS Replacement 142mm, 148mm & 157mm end caps Not compatible with microspline freehubs Rear 150mm caps NUKNEUV2R150CAPS Replacement 150mm end caps End Caps:Changing end caps is simple and no tools are required. Just pull off the end caps on the hub and then push the new ones on. Where the end caps are not identical, the non-driveside always has the wider flange to cover the bearing. All caps sold as pairs and only compatible with Nukeproof Neutron V2 hubs.Features: Use: MTB Compatibility: Nukeproof Neutron V2 hubsBuy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Neutron V2 End CapsThese end caps are specifically designed for use with Nukeproof Neutron V2 wheelsets. They can be used to convert your hub to a different spacing or replace a lost cap. Click here for fitting instructions.Please use the table below to determine which hubs can be converted as the caps only fit the original specific hub options. Caps Nukeproof Part Number Usage Front 9mm QR NUKNEUV2F9QRCAPS Convert 15mm non boost hub to QR Not compatible with the 20mm non boost hub shell Front 12mm Caps NUKNEUV2F12CAPS Convert 15mm hub shell to 12mm Front 15mm Caps NUKNEUV2F15CAPS Replacement 15mm end caps Not compatible with the 20mm hub shell Front 20mm Caps NUKNEUV2F20CAPS Replacement 20mm end caps Not compatible with the 15mm hub shell Front 15mm Rockshox Torque caps NUKNEUV2ENDB15T Convert 15mm boost hub for Rockshox Torque dropouts Front 20mm to 15mm boost conversion NUKNEUV2END2015B Convert 20mm boost hub to 15mm boost Front 20mm to 15mm non boost conversion NUKNEUV2END2015NB Convert 20mm non boost hub to 15mm non boost Rear 135mm QR conversion NUKNEUV2R135CAPS Convert 142mm non boost hub to 135mm QR Rear 141mm conversion NUKNEUV2R141BCAPS Convert 148mm boost HG / XD hub to 141mm Boost QR Not compatible with microspline freehubs Rear 142/148/157mm caps NUKNEUV2R148CAPS Replacement 142mm, 148mm & 157mm end caps Not compatible with microspline freehubs Rear 150mm caps NUKNEUV2R150CAPS Replacement 150mm end caps End Caps:Changing end caps is simple and no tools are required. Just pull off the end caps on the hub and then push the new ones on. Where the end caps are not identical, the non-driveside always has the wider flange to cover the bearing. All caps sold as pairs and only compatible with Nukeproof Neutron V2 hubs.Features: Use: MTB Compatibility: Nukeproof Neutron V2 hubsBuy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Neutron V2 End CapsThese end caps are specifically designed for use with Nukeproof Neutron V2 wheelsets. They can be used to convert your hub to a different spacing or replace a lost cap. Click here for fitting instructions.Please use the table below to determine which hubs can be converted as the caps only fit the original specific hub options. Caps Nukeproof Part Number Usage Front 9mm QR NUKNEUV2F9QRCAPS Convert 15mm non boost hub to QR Not compatible with the 20mm non boost hub shell Front 12mm Caps NUKNEUV2F12CAPS Convert 15mm hub shell to 12mm Front 15mm Caps NUKNEUV2F15CAPS Replacement 15mm end caps Not compatible with the 20mm hub shell Front 20mm Caps NUKNEUV2F20CAPS Replacement 20mm end caps Not compatible with the 15mm hub shell Front 15mm Rockshox Torque caps NUKNEUV2ENDB15T Convert 15mm boost hub for Rockshox Torque dropouts Front 20mm to 15mm boost conversion NUKNEUV2END2015B Convert 20mm boost hub to 15mm boost Front 20mm to 15mm non boost conversion NUKNEUV2END2015NB Convert 20mm non boost hub to 15mm non boost Rear 135mm QR conversion NUKNEUV2R135CAPS Convert 142mm non boost hub to 135mm QR Rear 141mm conversion NUKNEUV2R141BCAPS Convert 148mm boost HG / XD hub to 141mm Boost QR Not compatible with microspline freehubs Rear 142/148/157mm caps NUKNEUV2R148CAPS Replacement 142mm, 148mm & 157mm end caps Not compatible with microspline freehubs Rear 150mm caps NUKNEUV2R150CAPS Replacement 150mm end caps End Caps:Changing end caps is simple and no tools are required. Just pull off the end caps on the hub and then push the new ones on. Where the end caps are not identical, the non-driveside always has the wider flange to cover the bearing. All caps sold as pairs and only compatible with Nukeproof Neutron V2 hubs.Features: Use: MTB Compatibility: Nukeproof Neutron V2 hubsBuy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.