Nukeproof Tubeless MTB Rim Tape (10m)This durable and dependable Nukeproof tubeless tape has been tested by its in-house team and athletes to ensure a firm and effective seal. Made to meet the demands of downhill and enduro racing, it does a sterling job in keeping your tubes protected as you take on the most daring descents and trails. One 10-metre roll will be enough tape to cater for 4x 29” wheels. One layer with a 4” overlap is all that is required to tape your wheel for tubeless setup. We recommend using a tape which is 2 - 3mm wider than your inner rim width Instructions for Use Remove any old tape and sealant residue Ensure rim is clean and dry Start opposite the valve hole and maintain tension as you apply tape Work air bubbles out as you tape the wheel (Push them out via the spoke holes) Apply one layer of tape with a 4" overlap Ensure all air bubbles have been removed and tape is fully stuck right out to the edges of the rim Pierce a small hole and insert your valveFeatures: Length: 10m Suitability: Downhill, Enduro Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Thru Axle Front 15mmThis thru-axle is designed as a direct replacement for the standard thru-axles found in 15mm Rockshox Boost forks as well as most models of 15mm Boost Fox forks. It features a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike (MTB). This makes it a great choice of upgrade for riders who need to replace their damaged or lost stock axle on their forks.The axle has a washer which helps reduce pressure on the fork legs and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness, while preventing the axle from getting stuck when you want to remove it.All axles are a 6mm hex on the non-drive side and have a backup 6mm hex on the drive-side, allowing the axle to be tightened and loosened from either side of the bike.Always apply a small amount of grease to the axle and threads when installing your axle. Please Note: Not compatible with 2021 Fox 36mm / 38mm forks Diameter Axle Length Thread Pitch Thread Length RockShox 15mm Boost 158mm 1.5 10mm Fox 15mm Boost Not compatible with 2021 36mm / 38mm 155mm 1.5 13.5mm Click here for Nukeproof's technical information.Features: Material: AL7075 Aluminium CNC Precision engineered Hollow for weight saving 6mm Hex head at both axle ends for easy fitting & removalBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Thru Axle Front 15mmThis thru-axle is designed as a direct replacement for the standard thru-axles found in 15mm Rockshox Boost forks as well as most models of 15mm Boost Fox forks. It features a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike (MTB). This makes it a great choice of upgrade for riders who need to replace their damaged or lost stock axle on their forks.The axle has a washer which helps reduce pressure on the fork legs and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness, while preventing the axle from getting stuck when you want to remove it.All axles are a 6mm hex on the non-drive side and have a backup 6mm hex on the drive-side, allowing the axle to be tightened and loosened from either side of the bike.Always apply a small amount of grease to the axle and threads when installing your axle. Please Note: Not compatible with 2021 Fox 36mm / 38mm forks Diameter Axle Length Thread Pitch Thread Length RockShox 15mm Boost 158mm 1.5 10mm Fox 15mm Boost Not compatible with 2021 36mm / 38mm 155mm 1.5 13.5mm Click here for Nukeproof's technical information.Features: Material: AL7075 Aluminium CNC Precision engineered Hollow for weight saving 6mm Hex head at both axle ends for easy fitting & removalBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Thru Axle Rear 12mmThis 12mm thru-axle is designed as a direct replacement for riders who want a durable and dependable upgrade for their old standard thru-axle on their mountain bike (MTB). It's equipped with a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike adventures. This makes it a great choice of upgrade for riders who need to replace a damaged or lost stock axle from their frame.The axle has a washer which helps to reduce pressure on the frame dropouts and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness and prevent the axle from getting stuck when you want to remove it.Nukeproof have created a printable guide that you can use to measure your old axle against and check the exact dimensions to ensure you are selecting the correct axle. It can be downloaded hereAll axles are a 6mm hex on the non-drive side and have a backup hex on the drive-side allowing the axle to be tightened and loosened from either side of the bike.Always apply a small amount of grease to the axle and threads when installing your axle. Diameter Axle Length Thread Pitch Thread Pitch Rear 12mm 164mm 1.5 13mm Rear 12mm 170mm 1.5 13mm Rear 12mm 174mm 1.75 20mm Rear 12mm 175mm 1.5 12mm Rear 12mm 180mm 1.75 20mm Rear 12mm 180mm 1 13mm Rear 12mm 181mm 1.5 20mm Features: Material: AL7075 Aluminium CNC Precision engineered Hollow for weight saving Non-driveside 6mm Hex head with a backup driveside Hex for easy fitting & removalBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Thru Axle Rear 12mmThis 12mm thru-axle is designed as a direct replacement for riders who want a durable and dependable upgrade for their old standard thru-axle on their mountain bike (MTB). It's equipped with a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike adventures. This makes it a great choice of upgrade for riders who need to replace a damaged or lost stock axle from their frame.The axle has a washer which helps to reduce pressure on the frame dropouts and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness and prevent the axle from getting stuck when you want to remove it.Nukeproof have created a printable guide that you can use to measure your old axle against and check the exact dimensions to ensure you are selecting the correct axle. It can be downloaded hereAll axles are a 6mm hex on the non-drive side and have a backup hex on the drive-side allowing the axle to be tightened and loosened from either side of the bike.Always apply a small amount of grease to the axle and threads when installing your axle. Diameter Axle Length Thread Pitch Thread Pitch Rear 12mm 164mm 1.5 13mm Rear 12mm 170mm 1.5 13mm Rear 12mm 174mm 1.75 20mm Rear 12mm 175mm 1.5 12mm Rear 12mm 180mm 1.75 20mm Rear 12mm 180mm 1 13mm Rear 12mm 181mm 1.5 20mm Features: Material: AL7075 Aluminium CNC Precision engineered Hollow for weight saving Non-driveside 6mm Hex head with a backup driveside Hex for easy fitting & removalBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Thru Axle Rear 12mmThis 12mm thru-axle is designed as a direct replacement for riders who want a durable and dependable upgrade for their old standard thru-axle on their mountain bike (MTB). It's equipped with a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike adventures. This makes it a great choice of upgrade for riders who need to replace a damaged or lost stock axle from their frame.The axle has a washer which helps to reduce pressure on the frame dropouts and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness and prevent the axle from getting stuck when you want to remove it.Nukeproof have created a printable guide that you can use to measure your old axle against and check the exact dimensions to ensure you are selecting the correct axle. It can be downloaded hereAll axles are a 6mm hex on the non-drive side and have a backup hex on the drive-side allowing the axle to be tightened and loosened from either side of the bike.Always apply a small amount of grease to the axle and threads when installing your axle. Diameter Axle Length Thread Pitch Thread Pitch Rear 12mm 164mm 1.5 13mm Rear 12mm 170mm 1.5 13mm Rear 12mm 174mm 1.75 20mm Rear 12mm 175mm 1.5 12mm Rear 12mm 180mm 1.75 20mm Rear 12mm 180mm 1 13mm Rear 12mm 181mm 1.5 20mm Features: Material: AL7075 Aluminium CNC Precision engineered Hollow for weight saving Non-driveside 6mm Hex head with a backup driveside Hex for easy fitting & removalBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Thru Axle Rear 12mmThis 12mm thru-axle is designed as a direct replacement for riders who want a durable and dependable upgrade for their old standard thru-axle on their mountain bike (MTB). It's equipped with a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike adventures. This makes it a great choice of upgrade for riders who need to replace a damaged or lost stock axle from their frame.The axle has a washer which helps to reduce pressure on the frame dropouts and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness and prevent the axle from getting stuck when you want to remove it.Nukeproof have created a printable guide that you can use to measure your old axle against and check the exact dimensions to ensure you are selecting the correct axle. It can be downloaded hereAll axles are a 6mm hex on the non-drive side and have a backup hex on the drive-side allowing the axle to be tightened and loosened from either side of the bike.Always apply a small amount of grease to the axle and threads when installing your axle. Diameter Axle Length Thread Pitch Thread Pitch Rear 12mm 164mm 1.5 13mm Rear 12mm 170mm 1.5 13mm Rear 12mm 174mm 1.75 20mm Rear 12mm 175mm 1.5 12mm Rear 12mm 180mm 1.75 20mm Rear 12mm 180mm 1 13mm Rear 12mm 181mm 1.5 20mm Features: Material: AL7075 Aluminium CNC Precision engineered Hollow for weight saving Non-driveside 6mm Hex head with a backup driveside Hex for easy fitting & removalBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Thru Axle Rear 12mmThis 12mm thru-axle is designed as a direct replacement for riders who want a durable and dependable upgrade for their old standard thru-axle on their mountain bike (MTB). It's equipped with a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike adventures. This makes it a great choice of upgrade for riders who need to replace a damaged or lost stock axle from their frame.The axle has a washer which helps to reduce pressure on the frame dropouts and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness and prevent the axle from getting stuck when you want to remove it.Nukeproof have created a printable guide that you can use to measure your old axle against and check the exact dimensions to ensure you are selecting the correct axle. It can be downloaded hereAll axles are a 6mm hex on the non-drive side and have a backup hex on the drive-side allowing the axle to be tightened and loosened from either side of the bike.Always apply a small amount of grease to the axle and threads when installing your axle. Diameter Axle Length Thread Pitch Thread Pitch Rear 12mm 164mm 1.5 13mm Rear 12mm 170mm 1.5 13mm Rear 12mm 174mm 1.75 20mm Rear 12mm 175mm 1.5 12mm Rear 12mm 180mm 1.75 20mm Rear 12mm 180mm 1 13mm Rear 12mm 181mm 1.5 20mm Features: Material: AL7075 Aluminium CNC Precision engineered Hollow for weight saving Non-driveside 6mm Hex head with a backup driveside Hex for easy fitting & removalBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Thru Axle Rear 12mmThis 12mm thru-axle is designed as a direct replacement for riders who want a durable and dependable upgrade for their old standard thru-axle on their mountain bike (MTB). It's equipped with a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike adventures. This makes it a great choice of upgrade for riders who need to replace a damaged or lost stock axle from their frame.The axle has a washer which helps to reduce pressure on the frame dropouts and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness and prevent the axle from getting stuck when you want to remove it.Nukeproof have created a printable guide that you can use to measure your old axle against and check the exact dimensions to ensure you are selecting the correct axle. It can be downloaded hereAll axles are a 6mm hex on the non-drive side and have a backup hex on the drive-side allowing the axle to be tightened and loosened from either side of the bike.Always apply a small amount of grease to the axle and threads when installing your axle. Diameter Axle Length Thread Pitch Thread Pitch Rear 12mm 164mm 1.5 13mm Rear 12mm 170mm 1.5 13mm Rear 12mm 174mm 1.75 20mm Rear 12mm 175mm 1.5 12mm Rear 12mm 180mm 1.75 20mm Rear 12mm 180mm 1 13mm Rear 12mm 181mm 1.5 20mm Features: Material: AL7075 Aluminium CNC Precision engineered Hollow for weight saving Non-driveside 6mm Hex head with a backup driveside Hex for easy fitting & removalBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Thru Axle Rear 12mmThis 12mm thru-axle is designed as a direct replacement for riders who want a durable and dependable upgrade for their old standard thru-axle on their mountain bike (MTB). It's equipped with a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike adventures. This makes it a great choice of upgrade for riders who need to replace a damaged or lost stock axle from their frame.The axle has a washer which helps to reduce pressure on the frame dropouts and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness and prevent the axle from getting stuck when you want to remove it.Nukeproof have created a printable guide that you can use to measure your old axle against and check the exact dimensions to ensure you are selecting the correct axle. It can be downloaded hereAll axles are a 6mm hex on the non-drive side and have a backup hex on the drive-side allowing the axle to be tightened and loosened from either side of the bike.Always apply a small amount of grease to the axle and threads when installing your axle. Diameter Axle Length Thread Pitch Thread Pitch Rear 12mm 164mm 1.5 13mm Rear 12mm 170mm 1.5 13mm Rear 12mm 174mm 1.75 20mm Rear 12mm 175mm 1.5 12mm Rear 12mm 180mm 1.75 20mm Rear 12mm 180mm 1 13mm Rear 12mm 181mm 1.5 20mm Features: Material: AL7075 Aluminium CNC Precision engineered Hollow for weight saving Non-driveside 6mm Hex head with a backup driveside Hex for easy fitting & removalBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Thru Axle Rear 12mmThis 12mm thru-axle is designed as a direct replacement for riders who want a durable and dependable upgrade for their old standard thru-axle on their mountain bike (MTB). It's equipped with a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike adventures. This makes it a great choice of upgrade for riders who need to replace a damaged or lost stock axle from their frame.The axle has a washer which helps to reduce pressure on the frame dropouts and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness and prevent the axle from getting stuck when you want to remove it.Nukeproof have created a printable guide that you can use to measure your old axle against and check the exact dimensions to ensure you are selecting the correct axle. It can be downloaded hereAll axles are a 6mm hex on the non-drive side and have a backup hex on the drive-side allowing the axle to be tightened and loosened from either side of the bike.Always apply a small amount of grease to the axle and threads when installing your axle. Diameter Axle Length Thread Pitch Thread Pitch Rear 12mm 164mm 1.5 13mm Rear 12mm 170mm 1.5 13mm Rear 12mm 174mm 1.75 20mm Rear 12mm 175mm 1.5 12mm Rear 12mm 180mm 1.75 20mm Rear 12mm 180mm 1 13mm Rear 12mm 181mm 1.5 20mm Features: Material: AL7075 Aluminium CNC Precision engineered Hollow for weight saving Non-driveside 6mm Hex head with a backup driveside Hex for easy fitting & removalBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Conversion Kit 15mm to QRThis conversion kit has been designed as a quick way to allow you to convert any front 15mm x 100mm hub to QR. Just pop the axle into your 15mm hub to make it QR.Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.