Low friction needle bearings designed specifically to replace rear shock eyelet bushings. They reduce friction and provide smoother shock travel.Key Features: Fits 15mm diameter shock eyelets., Includes eyelet bearing & spacing hardware., Sold individually - 2 required for one shock..
Enduro's Stainless Steel bearings feature the same specs as the popular ABEC 3 range, but with corrosion resistant 440 C stainless steel balls and races.Key Features: Bearing Code: S6805, Dimensions: 25mm x 37mm x 7mm, ABEC: 3, Grade: 10, Seals: LLB, Grease: Mobile HP 222, Application: Hubs, Bottom Brackets, Weight: 20.50g.
The entry standard for Enduro bearings. Enduro’s ABEC 3 bearings offer improved quality and performance over ABEC 1 bearings fitted by many OE manufacturers. Only the finest cycling components come standard with Enduro’s ABEC 3 bearings. With hardened chromium steel races, balls, and tough riveted steel retainers, these bearings are durable and the perfect low cost performance upgrade.Key Features: Bearing Code: 63803, Dimensions: 17 x 26 x 7mm, ABEC: 3, Grade: 10, Seals: LLB, Grease: Mobile HP 222, Application: Hubs, Bottom Brackets, Weight: 7.73g.
Enduro's Stainless Steel bearings feature the same specs as the popular ABEC 3 range, but with corrosion resistant 440 C stainless steel balls and races.Key Features: Bearing Code: S6902, Dimensions: 15mm x 28mm x 7mm, ABEC: 3, Grade: 10, Seals: 2RS, Grease: Mobile HP 222, Application: Hubs, Bottom Brackets, Weight: 15.85g.
MAX berings are designed without retainers and 40% more balls than standard ABEC 3 or 5 bearings. This enables them to carry a much higher load and makes them perfect for frame pivots. They are also packed with CRC Marine Grease, which will not wash out or break down when wet ensuring your frame bearings last even longer.Key Features:Bearing Code: KP 6A,Dimensions: 3/8" x 7/8" x 5/16",ABEC: 3 ,Grade: 10,Seals: LLU,Grease: CRC Marine,Application: Frame Pivots,Weight: 9.69g.
Enduro's ABEC 5 is the next performance step up from the popular ABEC 3 range. By using military level, high precision HRC-64 hardended Grade 5 Chromium Steel Balls, and 52100 High-Carbon Chromium-Alloy mirror polished races. This combination allows Enduro's ABEC 5 bearings to use tolerances twice as tight as ABEC 3, and operate without any noise. The Graphite/Nylon ball retainers allow virtually frictionless movement and provide constant lubrication to maximise the life of the bearing.Key Features: Bearing Code: 6808 (61808),Dimensions: 40mm x 52mm x 7mm,ABEC: 5,Grade: 5,Seals: VV,Grease: Kyodo Yushi PS-2,Application: Hubs, Bottom Brackets,Weight: 30.89g.
Angular contact bearings provide maximum load distribution across all of the ball bearings unlike standard bearings which load only those at the bottom of the bearing. This load distribution ensures bearing life is increased drastically allowing for more time spent in the saddle than the workshop.Key Features:Bearing Code: SMR 15267,Dimensions: 15 x 26 x 7mm,ABEC: 3 ,Grade: 10,Seals: LLB,Grease: Kyodo Yushi PS-2,Application: Bottom Brackets,Weight: 11.20g.
The Enduro HyGlide hybrid seals combine the best of both worlds, oil retention and dirt/debris rejection. This design provides world-class performance in a long-lasting seal and delivers smooth action throughout the entire travel of the fork. This unique design joins the oil seal and wiper into a single unit, creating an ideal fork seal.The integrated top wiper is produced using a specific formulated polyurethane material, rather than a rubber compound that many fork seal manufacturers use. Our poly wiper/seal is a proper wiper keeping dirt and the elements out. In testing it is 300% more effective than a rubber wiper with garter spring used by many leading seal manufacturers. The co-molded oil seal below is made from Polyacrilate, the perfect material for the extreme operating temperatures and high pressures. The oil seal is also infused with MOS2 (Molybdenum Disulphide), a dry lubricant similar to graphite. While this is is the optimal material for the oil seal, it is separate in its duties from the upper wiper and is the reason for combining materials in to one hybrid seal.This cold-fused design allows the elimination of 1 sealing lip and further decreases the friction or “stiction” as referred to regarding fork movement. Between the two sealing lips, we have designed a large cavity area to hold lubricant to again prevent contamination and easy movement of the reciprocating fork producing more active suspension.With superior sealing action and cleaner fork lowers, your fork service intervals can be increased we find by 2 or 3 times compared to what the OE recommends. The HyGlide integrated wiper and oil seal provide much easier installation. No more fussing with a very thin lower seal that is fragile and easily bent when trying to install.
Enduro fork seals provide increased sealing with reduced drag and friction, and are the perfect upgrade for your fork. Durable Polyurethane dual-lip seals are super quiet and will last longer than any stock seals.Kit includes: 2x Oil Seals, 2x Wiper Seals, .
MAX bearings are designed without retainers and 40% more balls than standard ABEC 3 or 5 bearings. This enables them to carry a much higher load and makes them perfect for frame pivots. They are also packed with CRC Marine Grease, which will not wash out or break down when wet ensuring your frame bearings last even longer. Bearing Code: 6805, Dimensions: 25mm x 37mm x 7mm, ABEC: 3, Grade: 10, Seals: LLU, Grease: CRC Marine, Application: Frame Pivots, Weight: 21.55g , .
The entry standard for Enduro bearings. Enduro’s ABEC 3 bearings offer improved quality and performance over ABEC 1 bearings fitted by many OE manufacturers. Only the finest cycling components come standard with Enduro’s ABEC 3 bearings. With hardened chromium steel races, balls, and tough riveted steel retainers, these bearings are durable and the perfect low cost performance upgrade. Bearing Code: MR 22378, Dimensions: 22 x 37 x 7/10, ABEC: 3, Grade: 10, Seals: 2RS, Grease: Mobile HP 222, Application: Hubs, Bottom Brackets, Weight: 32.80g , . .
MAX bearings are designed without retainers and 40% more balls than standard ABEC 3 or 5 bearings. This enables them to carry a much higher load and makes them perfect for frame pivots. They are also packed with CRC Marine Grease, which will not wash out or break down when wet ensuring your frame bearings last even longer. Key Features: Bearing Code: 6800,Dimensions: 10mm x 19mm x 5mm,ABEC: 3 ,Grade: 10,Seals: LLU,Grease: CRC Marine,Application: Frame Pivots,Weight: 5.06g.