Upgrade your stock bottom bracket. Enduro bottom brackets are designed to spin more efficiently and for longer. The entry standard for Enduro bearings. Enduro's ABEC 3 bearings offer improved quality and performance over ABEC 1 bearings fitted by many OE manufacturers. Only the finest cycling components come standard with Enduro's ABEC 3 bearings. With hardened chromium steel races, balls, and tough riveted steel retainers, these bearings are durable and the perfect low cost performance upgrade.Key Features: Fits BB90 frames - 37mm diameter with a shell width 90.5mm (road) or 95.5mm (mountain) , Suitable for chainsets with 24mm axle , Lightweight, durable Delrin cups , Durable 2437 LLU ABEC 3 Bearings , 49.82g.
MAX bearings are designed without retainers and 40% more balls than standard ABEC 3 or 5 bearings. This enables them to carry a much higher load and makes them perfect for frame pivots. They are also packed with CRC Marine Grease, which will not wash out or break down when wet ensuring your frame bearings last even longer.Key Features: Bearing Code: MR 17286, Dimensions: 17mm x 28mm x 6mm, ABEC: 3, Grade: 10, Seals: LLU, Grease: CRC Marine, Application: Frame Pivots, Weight: 13.90g.
MAX bearings are designed without retainers and 40% more balls than standard ABEC 3 or 5 bearings. This enables them to carry a much higher load and makes them perfect for frame pivots. They are also packed with CRC Marine Grease, which will not wash out or break down when wet ensuring your frame bearings last even longer.Key Features: Bearing Code: R8, Dimensions: 1/2" x 1 1/8" x 5/16", ABEC: 3, Grade: 10, Seals: LLB, Grease: CRC Marine, Application: Frame Pivots, Weight: 21.62g.
Like Ceramic Hybrid, Zero Ceramic use a combination of ceramic (Silicon Nitride - Si3n4) balls and steel races, except they are of higher Grade 3 quality. The races are also black oxide treated and ground toa mirror finish which prevents corrosion and provides near perfect efficiency and tolerances.Key Features: Bearing Code: 6803,Dimensions: 17mm x 26mm x 5mm,ABEC: 5,Grade: 3,Seals: VV,Grease: Kyodo Yushi PS-2,Application: Hubs, Bottom Brackets,Weight: 6.85g.
Ceramic Hybrid combines the chromium steel races found in Enduro's ABEC 5 range with Grade 5 ceramic (Silicon Nitride - Si3n4) balls found in Zero Ceramic bearings. This combination creates a lighter, more efficient and more affordable ceramic bearing, perfect for use in hubs or bottom brackets. The low contact LLB seals provide protection from water or dirt ingress, but without causing any friction or drag.Key Features: Bearing Code: 6000,Dimensions: 10mm x 26mm x 8mm,ABEC: 5,Grade: 5,Seals: LLB,Grease: Kyodo Yushi PS-2,Application: Hubs, Bottom Brackets,Weight: 15.92g.
Angular contact bearings provide maximum load distribution across all of the ball bearings unlike standard bearings which load only those at the bottom of the bearing. This load distribution ensures bearing life is increased drastically allowing for more time spent in the saddle than the workshop.Key Features: Bearing Code: 6805, Dimensions: 27.15 x 38 x 6.5mm, ABEC: 3, Grade: 10, Seals: LLB, Grease: Kyodo Yushi PS-2, Application: Headsets, Weight: 17.67g.
The TorqTite bottom bracket line is designed to replace any press fit type on the market. This means no more glue, paste or tape to try and keep things quiet. This unique and patent pending system uses a double threaded internal sleeve to tighten the right and left cups with two spanner wrenches and torque your bottom bracket tight on installation. No more movement or internal fretting of your bottom bracket against your carbon fiber or aluminium frame, just a tightened mechanical system eliminating annoying and unwanted noises. Noises and internal friction that can also sap energy and wattage output. TorqTite guarantees perfect parallel alignment between the bearings even if the frame is not perfectly straight, eliminating lost energy.Key Features: Fits BB386Evo frames - 46mm diameter with a shell width of 86.5mm, Suitable for chainsets with 30mm axle, Lightweight, machined aluminium cups, Stainless Steel Angular Contact bearings.
The entry standard for Enduro bearings. Enduro’s ABEC 3 bearings offer improved quality and performance over ABEC 1 bearings fitted by many OE manufacturers. Only the finest cycling components come standard with Enduro’s ABEC 3 bearings. With hardened chromium steel races, balls, and tough riveted steel retainers, these bearings are durable and the perfect low cost performance upgrade.Key Features: Bearing Code: 689,Dimensions: 9 x 17 x 5mm,ABEC: 3 ,Grade: 10,Seals: 2RS,Grease: Mobile HP 222,Application: Hubs, Bottom Brackets,Weight: 6.69g.
MAX berings are designed without retainers and 40% more balls than standard ABEC 3 or 5 bearings. This enables them to carry a much higher load and makes them perfect for frame pivots. They are also packed with CRC Marine Grease, which will not wash out or break down when wet ensuring your frame bearings last even longer.Key Features:Bearing Code: KP 5A,Dimensions: 5/16" x 13/16" x 9/32",ABEC: 3 ,Grade: 10,Seals: LLU,Grease: CRC Marine,Application: Frame Pivots,Weight: 9.69g.
Enduro's Stainless Steel bearings feature the same specs as the popular ABEC 3 range, but with corrosion resistant 440 C stainless steel balls and races.Key Features: Bearing Code: S6900, Dimensions: 10mm x 22mm x 6mm, ABEC: 3, Grade: 10, Seals: 2RS, Grease: Mobile HP 222, Application: Hubs, Bottom Brackets, Weight: 9.40g.
MAX bearings are designed without retainers and 40% more balls than standard ABEC 3 or 5 bearings. This enables them to carry a much higher load and makes them perfect for frame pivots. They are also packed with CRC Marine Grease, which will not wash out or break down when wet ensuring your frame bearings last even longer. Key Features: Bearing Code: 699,Dimensions: 9 x 20 x 6mm,ABEC: 5 ,Grade: 5,Seals: LLB,Grease: CRC Marine,Application: Frame Pivots,Weight: 7.10g.
Enduro's Stainless Steel bearings feature the same specs as the popular ABEC 3 range, but with corrosion resistant 440 C stainless steel balls and races.Key Features: Bearing Code: S6802, Dimensions: 15mm x 24mm x 5mm, ABEC: 3, Grade: 10, Seals: 2RS, Grease: Mobile HP 222, Application: Hubs, Bottom Brackets, Weight: 6.71g.