The DHF incorporates ramped knobs for low rolling resistance and channel-cut knobs to increase gripping edges, giving straight-line control and precise cornering.
This is a Nukeproof precision engineered replacement Maxle dropout, which is designed specifically to hold a 135mm Maxle in the 2011 Snap frame. Tough durable construction with recesses to reduce excess material without compromising structural integrity.
With ramped blocks running along this MTB tyre's centreline, it delivers a speedy feel while its taller knobs on the edges offer immense braking and cornering. An EXO puncture-protection sidewall adds durability and strength to this tubeless-ready Maxxis tyre. Technologies: EXO: An extremely cut-resistant and abrasion-resistant material added to the sidewalls of select mountain tyres.
Rolling on a durable aluminium maxtal rim construction, this E-MTB wheelset is purpose-built for the increased speeds and torque produced by electric bike motors. Its wider 30mm internal rim width gives it additional stiffness and cornering precision, while its 28 threaded three-cross spokes deliver further lateral stiffness on rough terrains. Mavic has also equipped it with some of its finest technologies such as Pinch Flat Protection (PFP) and Fore Tapeless Tubeless technology, so you can benefit from a reduced chance of punctures, increased strength and tape-free tubeless tyre mounting. This makes it a great choice of upgrade for riders who want a strong and dependable wheelset wherever their next E-MTB adventure takes them. Tubeless-Ready E-MTB Wheelset Coming equipped with Mavic's patented PFP technology (Pinch Flat Protection), this wheelset's rims have a wider contact surface at the top of the sidewall to significantly reduce the risk of tyre cuts and punctures. The 30mm wide rims allow you to run lower tyre pressure for better traction and smooth-rolling efficiency. In addition, its patented Fore technology features a fully sealed upper rim bridge that eliminates the need for rim tape, making it the easiest system for mounting and changing tubeless tyres. Lightweight and Durable This E-MTB wheelset has been put through Mavic's ISM rim machining process, which removes material from the rims in strategic areas to minimise weight, without compromising strength, and its Black Shield treatment protects the rims against impacts and scratches. Mavic uses 28 straight-pull spokes (same spoke length throughout) for a strong connection between the rim and hub, while its ultra-reliable ID360 double ratchet system provides quick engagement and acceleration. Set up for 6-bolt disc brake mounts, these 29” wheels come complete with UST tubeless valves, spare spokes and accessories. Item Top Features Continued: Compatibility Front Axle: 15x110 Boost, convertible to 20x110 Boost thru-axle with adaptors Rear Axle: 12x148 Boost thru-axle Freewheel: Multiple options available to select from the drop-down menu Hubs Axles: Front: 15x110 Boost; Rear: 12x148 Boost 6-bolt brake rotor compatibility QRM Auto bearing preload technology Instant Drive 360 freewheel technology Spokes Material: Steel Nipples: Fore integrated Aluminium Count: 28 front and rear Lacing: Front and rear crossed 3, contactless Shape: Straight pull, flat, double-butted Weight Pair: 2070g (Front: 960g; Rear: 1110g) Max Rider Weight: 150kg (including bike) ASTM Category 5: Gravity riding focused on the descent Included Fore adjustment wrench 2 replacement spokes with each wheel Multi-function adjustment wrench (delivered with rear wheel) UST valve and accessories Manufacturer's Part Numbers: LP1634100 Black 29" Shimano (E-Deemax S 30 29 Pr Bst*) LP1632100 Black 29" SRAM XD SRAM XD (E-Deemax S 30 29 Pr Bst Xd*)
The centre tread features ramped knobs to improve acceleration and sipes have been added to create a smooth transition when leaning the bike over. Paddle-like knobs on the centre tread dig in under hard braking and help keep the bike in control. Pair it with a Minion DHF up front for the ultimate aggressive riding combo. Technologies: 3C MaxxGrip: This uses the softest rubber compounds to offer the ultimate in grip and slow rebound properties for unparalleled traction in downhill applications.
Improved Braking & Traction The modified knobs on the shoulder and centre of this fast plus-sized mountain bike tyre mean you get improved braking performance and traction on hard surfaces. When gravity starts to pull you downhill, you can depend on the High Roller II Tyre to keep you upright. Technologies: Tubeless Ready: Tubeless tyres provide the rider with many benefits: the ability to run lower air pressures, which improves traction; lower rolling resistance when compared to a tube-type tyre; and less chance of flatting since there is no tube. Maxxis Tubeless Ready tyres use a standard casing and require the use of a liquid sealant in order to make them airtight. EXO Protection: an extremely cut-resistant and abrasion-resistant material added to the sidewalls of select mountain tyres. This densely woven fabric is also lightweight and highly flexible, ensuring that the performance of the tyre remains unaffected. Choose EXO Protection for exceptionally rocky treacherous trails where the chance of sidewall cuts and abrasions is high. 3C MaxxTerra: An intermediate compound configuration used in select mountain tyres. 3C MaxxTerra is softer and offers more traction than 3C MaxxSpeed, yet provides better tread wear and less rolling resistance than 3C MaxxGrip.
The ABEC3 3802 sets the benchmark for military grade, high precision bearings. MAX bearings are designed without retainers which enables them to carry a much higher load and makes them perfect for frame pivots. Thanks to its CRC Marine Grease, you won't have to worry about it washing out or breaking down when wet, making your frame bearings last even longer. Technologies: CRC Sta-Plex Marine: This grease will not wash out or break down under any extreme conditions including power washing, salt water intrusion from the salted roads, or even dirt getting into the rolling areas. The High Pressure properties of this grease provides a cushion for the sharp blows that suspension pivots will endure. Tough and Tenacious for high impact and extreme conditions. LLU Seals: Two NBR 70 rubber seals with medium/high contact seal, which rides in a matching groove machined into the bearing to make a labyrinth type seal. The outer sealing lip repels dirt and water while the inner sealing lip retains the grease.
Covered in flat, tightly-packed centreline knobs to enhance speed and traction, this durable tyre also features well-spaced shoulder knobs for improved corner handling. The SilkShield layer adds excellent puncture protection to the sidewalls and from bead to bead, making this tubeless-ready tyre a go-to for XC riding. Technologies: SilkShield: SilkShield offers protection from bead to bead and an additional level of protection for sidewalls as well as under the tread.
The strongest K-EDGE Mount yet for today's heaviest computers, cameras and lights. Upgrade to the Max Combo for a solid and clean platform for your cycling electronics. K-EDGE mounts co-polymer plastic computer inserts are designed to hold the corresponding computer ONLY and break away in a crash to protect the computer body. Compatibility: All Wahoo Cycling Computers Combo (GoPro style light/camera interface) adapter compatible (K13-580-BLK sold separately) Payload Capacity: Top: 96g (example: Wahoo ROAM); Bottom: 242g on K-EDGE K13-580 Combo adapter (example: NiteRider 1800 or Cycliq FLY12)
The Premax Chamois Cream for Women comes with a female-specific pH formula that provides a rich, luxurious feel that will keep you feeling comfortable and your skin in optimal condition on the longest rides. The cream is especially developed to provide anti-bacterial protection, skin nourishment and moisturisation. Directions for Use Apply liberally and evenly at least 5 minutes before sport or exercise. Reapply at regular intervals as required. Ingredients: Aqua (Purified Water), Capric/Caprylic Triglycerides, Cetearyl Alcohol, Glycerin, Dimethicone, Glyceryl Stearate, Aloe Barbadensis (Aloe Vera) Leaf Extract, Ceteareth-20, Santalum Acuminatum (Quandong) Fruit Extract, Citrus Glauca (Desert Lime) Extract, Acacia Victoriae (Wattle Seed) Fruit Extract, Tocopherol, Butyrospermum Parkii (Shea) Butter, Rosa Canina (Rosehip) Fruit Oil, Macadamia Integrifolia (Macadamia) Seed Oil, Lavandula Angustifolia (Lavender) Oil, Melaleuca Alternifolia (Tea Tree) Leaf Oil, Xanthan Gum, Phenoxyethanol, Citric Acid, Benzyl Alcohol, Linalool, Limonene.
Perfect for racing and endurance road cycling disciplines, this saddle features a high-quality fibra-tek cover that's made from a technical material to guarantee strong and durable performance on every ride. Selle Italia has also kitted out this version with TI 316 stainless steel rails for an increase of up to 25% in resistance and durability as well as a reduction in weight by 15% in comparison to traditional rails. Another highlight is its waved (curved) profile that's recommended for static cyclists or riders with a posterior pelvic tilt. Also benefitting from a Superflow channel that runs down its middle section, it drastically reduces pressure, numbness and fatigue so you can enjoy lasting comfort on longer journeys. Weighing in at only 228g, this is a great choice of upgrade for reliable support without any weight penalty. Waved Shape Waved shape to help give greater stability on the saddle and better support to the ischial bones, even for long periods of time. Superflow Channel Superflow central cutout to better release pressure from the perineal area and increase the feeling of comfort. Manufacturer's Part Number: 080A922IKC001 Black L3
The Premax Anti Friction Balm for Women is a premium formulated anti-chafing balm that is made with both anti-bacterial and skin nourishing ingredients. The balm creates a long-lasting protective barrier which can endure against hours of extreme sporting activity. Directions for Use Apply liberally and evenly at least 5 minutes before sport or exercise. Reapply at regular intervals as required. The balm comes with a unique angled tip applicator design. Ingredients: Caprylic/Capric Triglyceride, Beeswax, Cetearyl Alcohol, Aloe Barbadensis (Aloe Vera) Leaf Extract, Butyrospermum Parkii (Shea) Butter, Oenothera Biennis (Evening Primrose) Oil, Rosa Canina (Rosehip) Fruit Oil, Persea Gratissima (Avocado) Oil, Tea Tree Oil, Lavandula Angustifolia (Lavender) Oil, Tocopherol, Linalool.