Effetto Mariposa Giustaforza Torque Wrench (1-8Nm)The Giustaforza 1-8Nm Torque Wrench Effetto has a torque capacity from 1 - 8Nm that's ideal for smaller and sensitive bike components. Plus, its small head size is ideal for working on hard to reach areas on your bike.The Effetto Mariposa Giustaforza Bicycle Torque Wrench is an ideal tool for both professional mechanics and cycling enthusiasts, Giustaforza 1-8 torque wrench has a very small head, to operate in tight spaces. Features: Professional workshop-quality torque wrench Cycling enthusiasts 1-8 Nm torque wrenchBuy Effetto Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Effetto Mariposa Mangiacatena Chain Cleaner is for quick and effective chain cleaning without the need to remove the chain from the bike, use a chain cleaning tool rather than simple brushes.Effective chain cleaning toolSix rotating brushes clean deep in to chainSturdy handleDual direction design, great on e-bikesReplacement brush kit availableWorks on 5 speed chains, up to 13 speedsMaximum chain width 9mmAlso suitable for single speed transmissionsThe Mangiacatena (Translation: Chain Eater) will thoroughly de-grease and clean the whole chain. It is the tool of its type to be equipped with lamellar (finned) elements at both ends, meaning the degreaser is contained when the chain is moved in either direction. This saves on degreaser, is less messy and very useful on many ebikes where only pedalling forwards moves the chain.Once the tool is assembled around the chain, degreaser is added to the fill level (Effetto Allpine Extra recommended). The chain follows a simple, low resistance path straight through Mangiacatena. First it is squeezed at both ends by the plastic fins then scrubbed clean by six rotating brushes which get soaked in the degreaser.For best results move the chain ten times through Mangiacatena with the tool installed below the Chainstay then repeat with it mounted above the Chainstay. Dispose of the dirty degreaser correctly then repeat the first stage but with water to rinse the chain and brushes. Finally dry the chain with a clean cloth before re-lubrication.
Effetto Mariposa Mangiacatena Chain CleanerThe Mangiacatena Chain Cleaner from Effetto Mariposa is a durable, efficient and fast acting chain cleaning device that scrubs deep into chain links. This high-performance chain cleaner thoroughly cleans all chain speeds, from single speed all the way up to 10, 11, 12 and 13-Speed chains.If you want to clean the chain in a thorough way and reduce the amount of degreasing liquid used, Mangiacatena is the one for you. It is the first chain cleaner equipped with lamellar elements at both ends, so that the chain can be cleaned by moving it in both directions, very useful also for electric bikes (E-Bikes). Equipped with six rotating brushes and a sturdy handle.Chain Cleaning with Minimum WasteThere is nothing wrong with cleaning the chain with the classic brush and solvent liquid in a tin. In that way, however, a lot of solvent is wasted without getting to a deep cleaning, unless you want to disassemble the chain and immerse it in the solvent. To avoid disassembly and clean in depth, we have developed Mangiacatena: the best cleaning with the least amount of solvent, in a short time, leaving the chain on the bike.Please Note: Reducing the amount of solvent used doesn't mean that cleaning takes place without getting dirty. Better to protect the floor with a cloth or work outside.Deep Cleaning FormulaThe chain runs straight inside Mangiacatena, squeezed at both ends between lamellar plastic (PE) elements with the task of keeping as much solvent inside as possible. The washing is performed by six rotating brushes, continuously soaked in the cleaning liquid, which actively remove dirt on each side, pushing the solvent inside the chain.Instructions for Use: Open Mangiacatena by removing the cover and positioning the lower part of Mangiacatena on the bottom span of the chain Mount the cover making sure it's perfectly aligned with the lower part, then slide the locking handle in place until it is fully engaged Add the degreasing liquid through the upper holes (it is recommended to use Effetto Mariposa Allpine Extra) until the lower tank is full to the “FILL” level line Keeping Mangiacatena in position with the side handle, pedal backwards for at least 10 full revolutions Note: the two lamellar elements at both ends reduce the waste of solvent, but slow down the sliding of the chain at least in the initial phase… so don't be afraid, just hold the Mangiacatena firmly Note: thanks to the lamellar elements, Mangiacatena allows - without wasting solvent - to pedal in both directions. To do this, it is recommended keeping the rear wheel of the bicycle off the ground (using a workshop stand or other support) It is now possible to move Mangiacatena: release the side locking handle by depressing the thumb lever and remove it, open the cover, disassemble Mangiacatena from the lower span of the chain and position it, as already described, on the upper span of the chain, for a second cleaning step. Add more degreaser if necessary Keeping Mangiacatena in position using the side handle, pedal backwards for at least 10 full revolutions Disassemble Mangiacatena and empty the liquid contained inside (dispose of in accordance with the law if you use non-biodegradable degreasers or lubricants) Water rinse: mount Mangiacatena on the lower span of the chain, add water through the top holes and make at least 10 full revolutions Disassemble Mangiacatena and empty the liquid contained inside (dispose of in accordance with the law if you use non-biodegradable degreasers or lubricants). Repeat from point 8 until perfect rinsing. At the end, rinse Mangiacatena with water and allow to air dry Dry the chain (rag, compressed air) and do not forget to lubricate it (we recommend our ecological Flowerpower Wax lubricant) Effetto Mariposa have selected Mangiacatena materials and construction for a long life. They also provide a complete set of replacement brushes, Mangiacatena Replacement Kit, to replace what you wear without having to throw everything away. They have also chosen to use lamellar PE elements at both ends, instead of the more common sponges, for their greater durability and resistanceFor Single-Speed Transmissions and 5 to 13 Speed ShainsThe chain runs straight inside Mangiacatena, instead of following a tortuous path, making it also suitable for single-speed transmissions (for a chain with a maximum width of 9 mm). No problem for traditional 5 to 13 speed chains.Features: The best way to clean the chain with minimum consumption of degreasing liquid The lamellar elements at both ends retain dirt and liquid inside Mangiacatena, while the six rotating brushes - continuously wet with degreaser - also act mechanically on the chain It can be used both on the lower and upper part of the chain, pedaling in both directions Degreasing liquid or water can be added from above, without the need to open Mangiacatena Made of shockproof and solvent resistant plastic. It can be refurbished with the appropriate replacement brush kit It works with single-speed transmissions (maximum chain width: 9 mm) and 5 to 13 speed chains Buy Effetto Mariposa Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
This high-performance chain cleaner thoroughly cleans all chain speeds, from single speed all the way up to 10, 11, 12 and 13-Speed chains. If you want to clean the chain in a thorough way and reduce the amount of degreasing liquid used, Mangiacatena is the one for you. It is the first chain cleaner equipped with lamellar elements at both ends, so that the chain can be cleaned by moving it in both directions, very useful also for electric bikes (E-Bikes). Equipped with six rotating brushes and a sturdy handle. Chain Cleaning with Minimum Waste There is nothing wrong with cleaning the chain with the classic brush and solvent liquid in a tin. In that way, however, a lot of solvents are wasted without getting to deep cleaning, unless you want to disassemble the chain and immerse it in the solvent. To avoid disassembly and clean in depth, we have developed Mangiacatena: the best cleaning with the least amount of solvent, in a short time, leaving the chain on the bike. Please Note: Reducing the amount of solvent used doesn’t mean that cleaning takes place without getting dirty. Better to protect the floor with a cloth or work outside. Deep Cleaning Formula The chain runs straight inside Mangiacatena, squeezed at both ends between lamellar plastic (PE) elements with the task of keeping as much solvent inside as possible. The washing is performed by six rotating brushes, continuously soaked in the cleaning liquid, which actively removes dirt on each side, pushing the solvent inside the chain. Instructions for Use: Open Mangiacatena by removing the cover and positioning the lower part of Mangiacatena on the bottom span of the chain Mount the cover making sure it’s perfectly aligned with the lower part, then slide the locking handle in place until it is fully engaged Add the degreasing liquid through the upper holes (it is recommended to use Effetto Mariposa Allpine Extra) until the lower tank is full to the “FILL” level line Keeping Mangiacatena in position with the side handle, pedal backwards for at least 10 full revolutions Note: the two lamellar elements at both ends reduce the waste of solvent, but slow down the sliding of the chain at least in the initial phase… so don't be afraid, just hold the Mangiacatena firmly Note: thanks to the lamellar elements, Mangiacatena allows - without wasting solvent - to pedal in both directions. To do this, it is recommended to keep the rear wheel of the bicycle off the ground (using a workshop stand or other support) It is now possible to move Mangiacatena: release the side locking handle by depressing the thumb lever and remove it, open the cover, disassemble Mangiacatena from the lower span of the chain and position it, as already described, on the upper span of the chain, for a second cleaning step. Add more degreaser if necessary Keeping Mangiacatena in position using the side handle, pedal backwards for at least 10 full revolutions Disassemble Mangiacatena and empty the liquid contained inside (dispose of in accordance with the law if you use non-biodegradable degreasers or lubricants) Water rinse: mount Mangiacatena on the lower span of the chain, add water through the top holes and make at least 10 full revolutions Disassemble Mangiacatena and empty the liquid contained inside (dispose of it in accordance with the law if you use non-biodegradable degreasers or lubricants). Repeat from point 8 until perfect rinsing. In the end, rinse Mangiacatena with water and allow to air dry Dry the chain (rag, compressed air) and do not forget to lubricate it (we recommend our ecological Flowerpower Wax lubricant) Effetto Mariposa has selected Mangiacatena materials and construction for long life. They also provide a complete set of replacement brushes, Mangiacatena Replacement Kit, to replace what you wear without having to throw everything away. They have also chosen to use lamellar PE elements at both ends, instead of the more common sponges, for their greater durability and resistance For Single-Speed Transmissions and 5 to 13 Speed Chains The chain runs straight inside Mangiacatena, instead of following a tortuous path, making it also suitable for single-speed transmissions (for a chain with a maximum width of 9 mm). No problem for traditional 5 to 13 speed chains.
Effetto Mariposa Mangiacatena Replacement KitThe Mangiacatena Replacement Kit from Effetto Mariposa is a direct replacement parts kit for refreshing the internal parts on the Mangiacatena chain cleaner. It includes all brushes and the two lamellar elements, and it is easy to assemble for prolonged service life.This kit allows you to replace the parts subject to normal wear of Mangiacatena, extending its lifespan.Replacing the brushes inside the Mangiacatena is very simple. For lamellar elements, which are glued, it may be necessary to use a cutter or flathead screwdriver to remove the old elements. To glue the new ones, Effetto Mariposa recommend using normal hobby glue or glue for repairing inner tubes. Leave to dry for a few hours before using Mangiacatena.Features: Contains all brushes and two lamellar elements Easy to assembleBuy Effetto Mariposa Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Mangiacatena Replacement Kit is a genuine replacement parts kit for refreshing the internal parts on the Mangiacatena chain cleaner. It includes all brushes and the two lamellar elements, and it is easy to assemble for prolonged service life. This kit allows you to replace the parts subject to normal wear of Mangiacatena, extending its lifespan. Replacing the brushes inside the Mangiacatena is very simple. For lamellar elements, which are glued, it may be necessary to use a cutter or flathead screwdriver to remove the old elements. To glue the new ones, Effetto Mariposa recommends using normal hobby glue or glue for repairing inner tubes. Leave to dry for a few hours before using Mangiacatena.
Small plastic keys that work to remove/tighten valve cores (key hole) and to tighten/remove valve extensions (key open end) .Available as packs of 10 pcs.
Shelter is a self-adhesive, transparent protection with visco-elastic behaviour that protects carbon-fibre or metal structures it’s applied to. Available in two versions, Road and Off-Road.Key Features:Shelter tape is a multi-layer acrylic protection tape which dissipates any impact energy on two axis. ,Each layer spreads loads vertically and horizontally, the impact energy decreases at each layer, protecting the bike frame. ,Perfect for carbon frames where the surface epoxy resin can be brittle and sensitive to impacts.,The tape is clear, does not hide graphics and can be applied easily.,Impact test video available for viewing below,Off Road - 1.2mm thick.,Road - 0.6mm thick.
Shelter is a self-adhesive, transparent protection with visco-elastic behaviour that protects carbon-fibre or metal structures it’s applied to. Available in two versions, Road and Off-Road, and three different formats each (Kit, Pack and Roll).Off Road - 1.2mm thick,Road - 0.6mm thick.Shelter Tape Off Road Kit Contains the following cut outs: 1 x Down Tube, 1 x Chain Stay, 1 x Top Tube/ Head Tube, 5 x Cable/ Hose spots.Shelter Tape Road Kit Contains the following cut outs:1 x Down Tube, 1 x Chain Stay, 8 x Cable spots, 4 presta valve hole (to reduce noise).Shelter Tape Road Pack and Off Road Pack contain:Two 54mm x 500mm lengths to be custom cut to your needs.Shelter Tape Road Roll and Off Road Roll contain:One 54mm x 5m length to be custom cut to your needs.Shelter tape is a multi-layer acrylic protection tape which dissipates any impact energy on two axisEach layer spreads loads vertically and horizontally, the impact energy decreases at each layer, protecting the bike framePerfect for carbon frames where the surface epoxy resin can be brittle and sensitive to impactsThe tape is clear, does not hide graphics and can be applied easily
Shelter Wheel Kit is made of 35 washers that fit snugly over the valve stem, gluing at its base, with an elegant and almost invisible silencing effect.It's also great to balance wheels, with an additional vibration-reducing action.Key Features:Eliminates valve noises, especially on high-profile rims,Shelter washers can be used to finely balance wheels,Visco-Elastic behaviour reduced vibrations.How to silence valves:Shelter Wheel Kit is made of 35 washers that fit snugly over the valve stem, gluing at its base. With minimum bulk and weight, they provide an elegant and almost invisible silencing effect, cancelling unwanted valve movements and vibrations. The re-sealable bag makes sure washers retain their properties if needed for successive applications.Once Shelter washers are applied on the rim, it’s possible to remove the valve an re-insert it without loosing the silencing effect. This is just one application of our Shelter Wheel Kit, but there’s more.Nobody would drive a fast car whose wheels haven’t been carefully balanced after mounting tyres on.Current high performance bicycle wheels, with fancy ceramic bearings, lightweight carbon rims, cannot deliver their full potential if not properly balanced.It’s an easy task that only requires a Shelter Wheel Kit, a wheel truing stand (or a bicycle turned upside down..), patience and some minutes per wheel.Much nicer and effective than electrical tape to silence valves on high-end wheelsMuch nicer (and effective) than electrical tape to silence valves on high-end wheelsHow to balance wheels:Mount the tyre (and eventually disk) on the wheel, so that the wheel is in its rideable form.IMPORTANT: if balancing a tubeless wheel, make sure there’s very little or no liquid sealant inside (that can be added later). Liquid sealant spreads while riding without creating wheel unbalance, but it will interfere with static balancing.Place the wheel on a truing stand and make sure it can rotate freely.With a gentle push, make the wheel spin. After a few complete rotations in the direction of the push, the wheel will enter a pendulum phase where it makes partial rotations, back and forth. Behaving like a pendulum, the excess of weight on the wheel is subject to a restoring force (due to gravity) that accelerates it toward the equilibrium position. Amplitude of swings will reduce until the wheel stops: the lowest point is where the excess weight is.Often wheels stop with the valve at the lowest point… but sometimes uneven weight distribution on the tyre or less-than-accurate carbon fiber lay up overcompensate that, and the lowest point is not corresponding to the valve.Keeping the lowest point of the rim/tyre as reference, identify the opposite point on the rim (you can find it using a ruler, aligned with the lowest point and the wheel axle) and adhere a Shelter washer there.Repeat the process from #1. Each time the heaviest point may move slightly (because of friction in the hub), but it will normally remain within a +-10 cm (4 inches) range.The wheel is balanced when, upon making it turn, IT WILL STOP WITHOUT ENTERING THE PENDULUM PHASE (it won’t change its rotation sense). With each subsequent spin, the lowest point when the wheel stops is a random point on the circumference, changing every time and depending on bearing friction.Washers can be adhered one on top of the other, or side by side, on top of the rim or on its side (depending on rim profile/size).A good trick, although not always possible, is finding a spoke that’s close to the lightest point of the wheel and cutting the washer on one side, so that the washer can be put around the spoke.Each Shelter washer weights around 1 g. Typical wheel unbalance ranges from 4 to 12 grams.Visco-elasticity reduces vibrations:That’s an added bonus when balancing a wheel with Shelter washers.The transmission of vibrational energy through any structure can be reduced by introducing visco-elastic materials at discrete points. It’s exactly what Shelter does, contributing to reduce vibrations on very stiff wheels.
Tappabuco is a tyre plug tool ideal for repairing punctures in tubeless tyres. Designed to work as end-plug for road and mountain bike handlebars, it can be carried inside most Shimano and SRAM bottom brackets too (it fits holes with inner diameter between 15 and 20 mm). Features: easy to carry specific version for 1,5 or 3,5 mm plugs light weight
The Tappabuco is a Tyre Plug tool ideal for repairing punctures in Tubeless Tyres. Designed to work as an end-plug for Road and Mountain Bike Handlebars, these tubeless tyre plugs can be carried inside most Shimano and SRAM Bottom Brackets too (it fits holes with inner diameter between 15 and 20 mm). This tubeless tyre repair kit is easy to carry and fast to use.Contains: Tappabuco 1.5 + 5pcs 1.5mm PlugsStainless Steel ForkHigh Density Silicone1.5mm PlugsFits into Road or MTB HandlebarsWhy We Created It - Tyre Plugs have become a standard way of fixing bigger punctures in Tubeless Tyres. With Tappabuco (Italian for stopgap or literally hole plugger) Effetto Mariposa wants to offer a practical solution for road and off-road riding, easy to carry and fast to use.Easy to Carry - Tyre Plug tools have to be easily reached in case of puncture but because of their sharp shape they should be stored in a safe way. Tappabuco solves this, as it s designed to work as end-plug for road and mountain bike handlebars, and it can be carried inside most Shimano and SRAM Bottom Brackets too (it will fit holes with inner diameter between 15 and 20 mm). Keeping the Rubber Tyre Plug already in the Tappabuco Fork ensures fast puncture repairing of Tubeless Tyres.Lightweight - Tappabuco is made of high density Silicone with a Stainless Steel Fork, for maximum durability and adaptability. Weight is just 13g for Tappabuco 3.5 and 11g for Tappabuco 1.5. Replacement Plugs can be kept on Tappabuco, keeping them as 5pcs card and inserting the Fork between two Plugs (the picture helps see it).