Carogna Remover is a modern solvent that will soften & gelify dried-out mastic or glues from tubular rims. Then its easier to remove this debris making for the optimal (clean) surface for installation of new Effetto tub tape.
Adhesion is guaranteed by industrial-grade acrylic glue, native to the base tape. This means that when removing the tubular (breaking its bond with the rim), the acrylic glue will stay on the tape, not on the rim. Acrylic has a good adhesion on both aluminium and carbon without any specific surface preparation.
Effetto Mariposa Cog BrushThe Cog Brush from Effetto Mariposa is a durable and easy to use cassette cleaning brush that is designed with two sets of bristles for deep cleaning your cassette sprockets. Its first brush features lateral bristles, with shorter and denser bristles that is ideal for cleaning chain, chainring and cogs. At the tip of the brush handle are longer and harder bristles that are ideal to reach the dirt deeper in the cassette between the sprockets.This brush, equipped with sturdy nylon bristles, is designed for cleaning chain, chainrings and cogs, removing dirt even inside the cassette.The Cog Brush is specifically designed to remove mud and dirt from chain and sprockets. It is equipped with two different sets of bristles. The lateral brush is more extended and with short and dense bristles - it is ideal for chain, chainrings and cogs. The brush at end of the tip is smaller but with longer and harder bristles - it reaches the dirt inside the cassette and the spaces between the sprockets.Functional and Comfortable HandleThe curved and thin handle can be slipped between the cogs and act against the mud deposited in the cassette (up to 10 speeds), thanks to the teeth in the lower part.Durable and Made to LastCog Brush is made of nylon, shockproof and resistant to solvents. Features: Specifically designed to remove mud and dirt from chain and sprockets Equipped with two sets of bristles: lateral, with shorter and denser bristles, for chain, chainring and cogs; at the tip, with longer and harder bristles, to reach the dirt in the cassette The curved and thin handle can be slipped between the cogs and act against the mud deposited in the cassette (up to 10 speeds), thanks to the teeth in the lower part Made of nylon, shockproof and resistant to solventsBuy Effetto Mariposa Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Effetto Mariposa Espresso Inflate & Repair takes all of the pain out of getting a puncture in your inner tube, tubeless tyre or tubular tyre. By combining an inflater with a sealant injector, the Espresso Inflate & Repair will help get you back up and running in no time.Combines tyre inflater with a sealant injector to get you back riding quicklyFlexible silicone hose fits directly to presta valves and is easy to useCaffelatex sealant seals holes in inner tubes up to 1mm and holes in tyres up to 5mm125ml size will inflate up to a 29x3.0 tyreNot only does the Espresso inflate your tyre back up to riding pressure, but the Caffelatex sealant also helps to seal holes up to 5mm. Caffelatex's formula contains microscopic silicate particles, allowing the sealant more time to seal holes. These particles are so small, at less than 2 microns in diameter, that the sealant is still highly fluid and easily coats the inside of your tyre or tubular. The formula also has a foaming action when the wheel is spinning, further helping to improve the sealing of any punctures.Combined with the inflating action and the easy to use flexible hose that fits directly to presta valves, should you puncture you can be back up and running in a matter of seconds. Easy to use and incredibly useful, the Effetto Mariposa Espresso Inflate & Repair is perfect for riders who want to fix a puncture in double quick time.
The Effetto Mariposa Espresso Inflate & Repair takes all of the pain out of getting a puncture in your inner tube, tubeless tyre or tubular tyre. By combining an inflater with a sealant injector, the Espresso Inflate & Repair will help get you back up and running in no time.Combines tyre inflater with a sealant injector to get you back riding quicklyFlexible silicone hose fits directly to presta valves and is easy to useCaffelatex sealant seals holes in inner tubes up to 1mm and holes in tyres up to 5mm125ml size will inflate up to a 29x3.0 tyreNot only does the Espresso inflate your tyre back up to riding pressure, but the Caffelatex sealant also helps to seal holes up to 5mm. Caffelatex's formula contains microscopic silicate particles, allowing the sealant more time to seal holes. These particles are so small, at less than 2 microns in diameter, that the sealant is still highly fluid and easily coats the inside of your tyre or tubular. The formula also has a foaming action when the wheel is spinning, further helping to improve the sealing of any punctures.Combined with the inflating action and the easy to use flexible hose that fits directly to presta valves, should you puncture you can be back up and running in a matter of seconds. Easy to use and incredibly useful, the Effetto Mariposa Espresso Inflate & Repair is perfect for riders who want to fix a puncture in double quick time.
Espresso Strap is a universal adapter to securely fasten cylindrical objects (pumps, CO2 cartridges, inflate & repair canisters…) to a bicycle frame, stem or seatpost.Designed for our Espresso or Espresso Doppio.Key features:Feather weight: totally reliable clamping at a ridiculous 20g,Universal: allows to secure Espresso (both standard 75ml and Doppio) to the bicycle, independently from frame/tubes shapes and sizes.,Safe: thanks to the soft rubber element and to the strong velcro strap, unwanted cartridge release are simply impossible..
Flowerpower is a performance wax-based lubricant using natural ingredients including a high sunflower seed wax content. It is an efficient way to lubricate bicycle chains yet harmless to the environment with its formula avoiding any fluorinated compounds (PFAS), graphene or sulphides.Effective and clean lubricant for chainsHarmless to the environmentStrong adhesion to metal - High sunflower seed wax content adheres to clean metalWater resistant formulaSuitable for road or off-road ridingLong lastingLow friction formulaStore and apply temperature range 5 - 35 ° C (41 - 95 ° F)Made in Italy100mlAfter treatment with Flowerpower lube, the chain will run quietly and more efficiently, giving more power to the rider. It will not attract dirt like oil-based lubes, so the life of the chain is extended. Flowerpower is a wax emulsion based in water, not alcohol. It has a high wax-to-water ratio exceeding 50%. Applied to a clean chain Flowerpower penetrates and coats the chain with a thick layer of wax which anchors to the metal as the water base evaporates. This leaves a long-lasting wax coating that is resistant to pedalling stresses and water from rain or the trail/road.It is recommended that about 4ml of Flowerpower lube is used on a clean chain. This will last approximately 300km in dry riding road conditions or 7,500km per 100ml bottle. Off-road or use in heavy rains are likely to require more frequent applications.
Effetto Mariposa Flowerpower Wax Chain Lube (100ml)Efficient, performance-enhancing and not harmful to the environment, the Flowerpower Wax Chain Lube from Effetto Mariposa is a superb chain lube that is ideal for all-conditions riding. Formulated to ensure exceptional lubrication while protecting your chain links and drivetrain from accumulated dirt, grit and grease, this wax-based chain lube is sure to keep your drivetrain running smooth and silent regardless of whether you're travelling on the road or along muddy mountain bike trails.The Advantages of Wax Chain LubricationWe are all familiar with the classic lubricating oils, traditionally used in cycling. However, these products are subject to rapid contamination during use, collecting dust and dirt (hence the classic trace of black they leave) and over time becoming real abrasive pastes that reduce the life of the chain and - progressively - its efficiency (we are talking about several Watts of precious leg power wasted).The use of lubricating waxes has become more and more widespread: the chain treated with these products does not dirty, runs silently for a long time and absorbs less power, all this while increasing the number of miles/kilometres travelled before a chain has to be replaced. Water-based wax emulsions, such as Flowerpower Wax, bring great benefits, following some simple usage tips.How Flowerpower Wax WorksFlowerpower Wax creates a solid layer of wax that is interposed between the moving elements of the chain, reducing friction. It is a water emulsion of natural waxy compounds, with the right viscosity to penetrate inside the chain links, where lubrication is most important. Once the water has evaporated, a thick layer of wax remains firmly anchored to the metal, creating a real anti-friction pad.The chain will not be dry to the touch - given the layer of wax that also protects the outside - but it will not be greasy or sticky and will not retain dirt.First ApplicationWax emulsions require a deep cleaning of the chain before they can be applied the first time. It is essential to remove any oily traces so that the emulsion comes in contact with the metal and can deposit a well-adhering layer of wax.The thing is very simple using Effetto Mariposa's Allpine Extra - an excellent degreaser designed for this purpose - and the Mangiacatena chain cleaner, equipped with rotating brushes. Thanks to these products it is not necessary to disassemble the chain to clean it thoroughly. Rinse the chain with water and dry it perfectly to complete cleaning.Once this is done, after shaking the Flowerpower Wax bottle vigorously, apply a drop of product on each link of the chain. When each link has received its drop of wax, slowly turn the pedals (at least 10 complete revolutions) in order to allow the emulsion to penetrate inside. Leave to dry for at least 2-3 hours.For the first application, repeat the lubrication process described above a second time (one drop of Flowerpower Wax per link, etc.). After waiting again for 2-3 hours to allow the water to evaporate, possibly clean the excess product on the outside of the chain with a cloth and you are ready to pedal.Successive ApplicationsAs the miles/kilometres accumulate, when the chain starts to become noisy, simply clean it with a dry cloth and reapply a drop of Flowerpower Wax on each link. Since the wax retains no or very little dirt, it is possible to continue to lubricate in this way without the need to degrease the chain, which is instead recommended in case of rides in muddy conditions or in the presence of sand. In that case it is better restoring the initial conditions with Allpine Extra, rinse, dry and then proceed with a deep lubrication with Flowerpower Wax.In normal use, Effetto Mariposa recommend lubricating the chain if needed after the usual cleaning of the bicycle, in order to find it ready for the next ride.High Percentage of WaxThere can be major differences between water-based wax emulsions. While many competing products are around 30%, Flowerpower Wax exceeds 50%* of wax-to-water ratio. The result is the formation of a thicker anti-abrasion layer for the same quantity of emulsion applied, with great benefits in terms of durability and efficiency.* Percentage by weight (dry residue after evaporation of water)The Strength of Sunflower SeedsThe wax obtained from sunflower seeds has interesting characteristics for cycling use. It adheres strongly to metal and is water-resistant, prolonging the effectiveness of lubrication even in the event of rain or involuntary washing (creek crossing etc.). It also has excellent mechanical properties, necessary to withstand the continuous stresses of pedalling.Thanks to its formulation, Flowerpower Wax is ideal in any season, both on and off-road.Without Hazardous AdditivesEffetto Mariposa have decided to avoid adding further additives (such as PTFE and fluorinated compounds in general, graphene, sulphides, etc.) to keep Flowerpower Wax totally harmless to the health and environment, also because the current formula - among other things, vegan - has satisfied the most demanding testers and racers in the long development phase. Together with sunflower seed wax, other waxes of natural origin complete the lubricating mix. The emulsion is water-based without the addition of alcohol.Format, Tips for Use and Storage:Flowerpower Wax is available in 100 ml bottles. Shake well before use to allow the ingredients to mix evenly.A single application of Flowerpower Wax allows you to travel about 300 km on an asphalted road, in the absence of heavy rain. Off-road use may require more frequent chain lubrication.Keeping the chain well lubricated allows you to optimize the life of the drivetrain and its efficiency in terms of power absorption. Considering that a complete lubrication of the chain requires about 4 ml of product, a 100 ml bottle allows 25 lubrications, for an approximate total of 7,500 km travelled.Store and apply the product at a temperature between 5 and 35 ° C (41 - 95 ° F). Once applied to the chain, the temperature limits of use are those at which you decide to ride.Features: Creates a solid layer of wax between the moving parts of the chain, reducing friction, noise and increasing the life of the chain Unlike lubricating oils, it does not dirty clothes and resists contamination by dirt and dust very well Thanks to the sunflower seed wax, it is very resistant to water and is ideal in any season, on and off-road High wax to water ratio (over 50%) Rapidly biodegradable: it does not contain PTFE, sulphides, graphene or other chemicals harmful to the environmentBuy Effetto Mariposa Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
The ideal tool for both professional mechanics and cycling enthusiasts, the Giustaforza 1-8 torque wrench has a very small head, to operate in tight spaces.Specifically designed for bicycle applicationsVery easy to useExtreme constructive quality for maximum reliability and durabilityVery small, non-ratcheting head, to operate in tight spacesNo batteries to replaceNo plastic partsMinimal, fixed head: The simple, non-ratcheting head has been designed to operate where space is limited, for example with some seat clamps. This small head is a unique asset to work in tight areas. Compatible with standard 1/4 bits.Lightweight: The light aluminium body keeps the weight below140 g, less than half the weight of other torque wrenches in this range of torque. This is paramount to get the right feedback at low torque values, without mistaking the effort to hold the tool with the applied torque.A state-of-the art tool, built to last: Functional, linear in design and precise in any detail: Giustaforza 1-8 has a hard-anodized aluminium body with laser-etched inscriptions, and it s built to last. The mechanical, click-type functioning makes the wrench extremely shock tolerant and the absence of batteries or electronics increase its reliability. Each sample is checked and numbered as a single masterpiece.
The Effetto Mariposa Giustaforza Bicycle Torque Wrench is an ideal tool for both professional mechanics and cycling enthusiasts, Giustaforza 1-8 torque wrench has a very small head, to operate in tight spaces.
The Effetto Mariposa Giustaforza Bicycle Torque Wrench is an ideal tool for both professional mechanics and cycling enthusiasts, the Giustaforza 1-8 torque wrench has a very small head, to operate in tight spaces. This Deluxe version is completed with cycling-specific bits in a practical wrap package.Specifically designed for bicycle applicationsVery easy to useExtreme constructive quality for maximum reliability and durabilityVery small, non-ratcheting head, to operate in tight spacesNo batteries to replaceNo plastic parts10x25mm (HEX2, HEX2.5, HEX3, HEX6, T10, T15, T20, T30, -3/16, +PH1)3x100mm (HEX4, HEX5, T25)1x100mm (extension)Capacity from 1 up to 8 Nm: The Giustaforza 1-8 is especially attractive for very sensitive bolts. On those, where the right torque matters most, tightening values can be easily exceeded without the user knowing. Going as low as 1 Nm puts the Giustaforza 1-8 in a league on its own. In use, always refer to the torque values specified on technical documents or printed on the parts themselves.Minimal, fixed head: The simple, non-ratcheting head has been designed to operate where space is limited, for example with some seat clamps. This small head is a unique asset to work in tight areas. Compatible with standard 1/4 bits.Lightweight: The light aluminium body keeps the weight below140 g, less than half the weight of other torque wrenches in this range of torque. This is paramount to get the right feedback at low torque values, without mistaking the effort to hold the tool with the applied torque.A state-of-the art tool, built to last: Functional, linear in design and precise in any detail: Giustaforza 1-8 has a hard-anodized aluminium body with laser-etched inscriptions, and it s built to last. The mechanical, click-type functioning makes the wrench extremely shock tolerant and the absence of batteries or electronics increase its reliability. Each sample is checked and numbered as a single masterpiece.Bits include a 100 mm-long extension, three 100 mm-long bits (hex 4, hex 5 e T25) plus several other Torx and hex bits in standard length (25 mm). All bits are manufactured from S2 special steel, with very high (62 Hrc) surface hardness, to ensure maximum durability.
With a torque range from 10 up to 60 Nm, this tool is standard equipment of the best cycling workshops. Design is inspired by smaller Giustaforza, constructive quality and reliability are state-of-the art. The wrench is supplied with a 3/4-1/2 adapter includedCapacity from 10 up to 60 Nm:This torque range is ideal for the elements of the bicycle with the highest torque specifications (bottom bracket, cassettes). In use, always refer to the torque values specified on technical documents or printed on the parts themselves.Easy to use:Unlock the wrench-end knob by gently pulling it, and set the desired torque value rotating the knob and reading the torque on the scale. After setting the torque value, push the knob back in place, to prevent unwanted changes to the set value while using the wrench. Depending on the rotation direction of the part you want to tighten, push the square section bar through the wrench head to one side or the other. When using the tool, a loud ‘CLICK’ and a 3° free-movement tells when the torque has been reached. Always take the wrench to minimum torque value after use.A state-of-the art tool, built to last:Functional, linear in design and precise in any detail: shouldn’t be a surprise to know that Giustaforza II 10-60 has been conceived and produced in Italy. The tool has laser-etched inscriptions and is built to last. The mechanical, click-type functioning make the wrench extremely shock tolerant and the absence of batteries or electronics, increase its reliability. Each sample is checked and numbered as a single masterpiece.