The 2 expandable Vegaprene rim tapes supplied with the kit can turn your Tubetype rims into Tubeless ones. No more need for an inner tube! The ideal way to try the benefits of Tubeless tyres at a lower cost.
Reliable sealed bearing headset for 1 inch or 1 1/8 inch steerersAnodised aluminium cups, locknut and upper stem cone keep weight low as well as being completely rust-resistantSealed cartridge bearings give smooth performance with low-maintenance and ease of replacementSteel lower stem coneDesigned for threaded steerers, but can be used on threadless steerers with the M:Part AdaptorStack height: 37.6 mmWeight: 106 grams
*Please note, this pump now has a Smart head which serves both Presta and Schrader valves’Jet Air 1601-PSI Air Accumulator Works with most 160-PSI rated floor pumps,Provides continuous large air flow to pop-seal tubeless tyre’s,4-second inflation for most tubeless tyres with 160PSI charged in the tank,Patented bypass air channel allows for air to go flow directly,Charge: Schrader valve / Discharge: Beto patented 3-valve LD head,Heavy gauge steel structure tested up to 700PSI. road.cc 4.5/5 Review:
The ALL NEW Brushless 16” eDRIVE comes stock with our new High-Output Brushless Motor right out of the box. Our new upgraded motor packs a punch with additional low-end power and torque allowing for more aggressive riding on more varied terrain.The STACYC 16eDRIVE is the perfect choice for little rippers with some experience on a balance bike and are a little taller and/or more familiar with riding STACYC Stability Cycles and need a larger platform. Your child should have an inseam of 18” or more to adequately touch the ground with a slight bend in the knees for optimum sizing. Your child can learn to push, balance, and coast in the Non-powered mode. Graduate them to the powered mode (the holy grail of fun) as they show proficient use and understanding of the brake and the ability to coast and brake while standing. Start them with a speed similar to what they can push the non-powered version at, and they learn the use of the twist throttle, and a long coast turn into a constant use of throttle and giggles. As they continue to develop skills, the medium speed of the STACYC 16eDRIVE allows for an exceptional amount of fun outdoors, getting thousands of hours of hand-eye coordination, balance, and outdoor exercise.Perfect for 5-7yr old rippers under 75lbs, with 18-24” inseamFrame: Aluminum TIG Welded and Heat Treatment,16” Composite Wheels with Pneumatic tires,Seat Height: 17?,Weight: 20lbs with battery,High Output Brushless Motor.High Output Brushless Motor20% more power and than original 16eDRIVE,10% more efficient than original 16eDRIVE,Increased durability,No fuse,Thermal protection for motor and controller,Power selection modes:,Low/Training mode ~ 5mph,Med/Standard mode ~ 7.5mph,High/Advanced mode ~ 13mph (with stock gear ratio).Industrial Grade, Lithium-ion Battery and Charger*Quick disconnect/connect battery,20Vmax Voltage (18Vnom),4Ah,30-60 min run-time**,30-60 charge time.*1 battery and charger included**Run-time is entirely dependent on terrain, hills, and skill level. Run-times are estimates and can vary.Please Note, the Stacyc e Kids bikes are legal to use on pavements as they are classified as electric children's bikes not Scooters, and as such, should be used with the appropriate safety equipment (helmet and suitable clothing/footwear)
Designed for intensive training, it is equally suitable for racing events. The Rubino Pro builds on the standard Rubino platform, utilising the same exclusive 3C Graphene compound structure, long service life, puncture protection, and sharp handling traits, but substitutes a folding bead material for reduced weight. The Rubino Pro has long been a favourite for both training and racing, and with the addition of Graphene technology compounds, is more versatile than ever!150 TPI Nylon casing for high mileage,3 compounds in the tread (3C) for increased wear life and better rolling,All-rounder for any condition,GRAPHENE 2.0 compound allows for increased wet grip.Key Features:Material: Nylon 150 TPI,Compound: 3C Graphene 2.0,Discipline: Road Race erformance,Bead: Tubeless / TLR.
Angular contact bearings provide maximum load distribution across all of the ball bearings unlike standard bearings which load only those at the bottom of the bearing. This load distribution ensures bearing life is increased drastically allowing for more time spent in the saddle than the workshop.Bearing Code: ACB 4545 1125,Dimensions: 30.5 x 41.8 x 8mm,Angular Contacts: 45x45,ABEC: 3,Grade: 10,Grease: Kyodo Yushi PS-2,Application: Headsets,Weight: 19.24g.
The design for the original crankbrothers pedal began out of frustration. The founders of crankbrothers, Carl and Frank, were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question, Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal, and later it was adapted into the candy pedal. The candy 7 pedal is a clipless pedal with a platform offering improved stability across a wide range of disciplines from all mountain / trail to cyclo-cross. The pedal body is 10% larger than the level 1, 2 and 3 pedal bodies. The chamfered edges help to minimise rock strikes.There is an ongoing debate amongst many riders about which is best, candy or eggbeater. The candy pedal provides an additional platform which is confidence inspiring and also gives some support or those moments when you’ve unclipped but are unsure if you need to get your foot down for a dab, jump off the bike or quickly get clipped in again and put the power down.Key Features:Excellent mud-shedding: the design is very open.,Ribbed body for extra traction when unclipped,4-sided entry: clip in on all 4 sides of the pedal, by pushing forward or pulling backwards on the pedal.,Increased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike, while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling.,Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately (link to these).,Customise the fit between your shoe/pedal interface by using integrated traction pads. The pedals come with the 1mm tread pads fitted and include set of 2mm pads in the box.,Chamfered edges help reduce rock strikes,Outer enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials, grease and sealing on their bearings which are designed especially for use on a bike.,Inner igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. ,Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal.,crankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models, which allows for ease of servicing, this is easily done using the pedal refresh kit (CRB-16051)..Specifications:Weight (per pair): 320g,Spindle: Forged scm 435 chromoly steel,Body: 6061-T6 aluminium,Wings: 17-4PH stainless,Spring: 300 series stainless steel,Inner bearing: Igus LL-glide bearing,Outer bearing: Enduro cartridge bearing,Cleats: Premium brass cleats included,Release angle: 15° or 20°,Warranty: 5 years.
The crankbrothers candy is an iconic pedal designed by Carl and Frank, the original founders of crankbrothers, they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question, Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal, and later it was adapted into the candy pedal. The Candy is really diverse and is used by a wide range of riders. We have seen them out on the trail, at cyclocross races and even on commuter bikes. The cage around the 4 point engagement system inspires confidence and offers a great alternative to the eggbeater pedal if you want more of a pedal body surface area.Key Features:Cleat: Premium brass cleats included,Shims: Included,Release Angle: 15° to 20°,Warranty: 5 years,Weight: 304g per pair,Spindle: Forged scm435 chromoly steel,Body: 2 piece machined aluminium,Wings: Cast Steel,Spring: 300 series stainless steel,Inner bearing: Needle,Outer bearing: Cartridge,Maximum rider weight: No restrictions,Colour options: Black/Silver, Blue/Silver or Red/Silver,.You can customise the fit and feel of your pedal using crankbrothers tread contact sleeves (CRB-13282). These shims come with 3 different thicknesses enabling the rider to ensure good contact between their shoes and the pedal axle (as the tread wears down the contact can move away from the axle and onto the wings of the pedal).As with the rest of the crankbrothers range the pedals are fully serviceable with a level 3 / 11 service kit (product code CRB-11730). Servicing is simple and does not require any specialist tools, just a flat head screwdriver, socket wrench and 8mm allen key to hold the pedal by the axle. We recommend that the pedal is cleaned and greased every 30 hours of riding and the bearings are inspected for wear.
Choose to ride flat or clipped in. The new double shot is crankbrothers hybrid pedal designed half flat / half clip-in.Moulded traction pins and diamond plate area provide grip and support. Key Features:Excellent mud-shedding: machined pedal body helps further prevent mud clogging.,Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately (link to these).,Internals run on igus LL-glide bearing which has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. ,Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal..
Mallet pedals feature a double sided open design allowing for quick and reliable engagement with minimal mud clogging. A two piece body keeps the weight down whilst providing a strong and durable platform.Key Features:Release angle: 15° to 20°,Cleat: Premium brass cleats included,Warranty: 5 years,Weight: 428g per pair,Platform: Two piece aluminium + composite,Wings: Stamped steel,Spring: 300 series stainless steel,Spindle: Forged scm435 chromoly steel,Inner bearing: Bushing,Outer bearing: Cartridge,Traction pins: 8mm adjustable.
Enduro's Stainless Steel bearings feature the same specs as the popular ABEC 3 range, but with corrosion resistant 440 C stainless steel balls and races.Key Features: Bearing Code: S6000,Dimensions: 10mm x 26mm x 8mm,ABEC: 3,Grade: 10,Seals: 2RS,Grease: Mobile HP 222,Application: Hubs, Bottom Brackets,Weight: 10.41g.