This MTB fork features a Float EVOL air spring and a FIT GRIP damper with three positions of adjustment, so you can set it up to perfectly match your riding style as well as the terrain. Fox Suspension has also equipped this model with a lightweight yet robust chassis for a superior strength to weight ratio. Item Top Features Continued: Travel: 140mm Remote Operated: No Lever Operated: Yes Lockout: No Part Numbers: 29", 51mm Offset: 910-20-968; 27.5", 44mm Offset: 910-20-987; 29", 44mm Offset: 910-20-969
No stranger to winning awards, accolades and Enduro World Series (EWS) races, this E-MTB suspension fork is built to perform everywhere from big backcountry routes to the EWS circuit. Featuring a new design inside-and-out, this model is part of Fox Suspension's Performance Series and includes an anodised finish on its upper tubes for extra protection against wear and corrosion. It's also equipped with Boost axle spacing for additional stiffness, making it ideal for modern enduro riding. Coming complete with a Float EVOL air spring and a GRIP damper with three-position on-the-fly adjustability, this E-bike-ready fork provides a wide range of customisation, so you can benefit from a more rider-tuned feel. E-MTB Fork with FIT GRIP Damper Inspired from moto, the GRIP damper uses Fox Suspension's FIT sealed cartridge technology combined with a coil-sprung, independent floating piston. GRIP allows excess oil to purge through specially designed ports at the top of the damper to maintain consistent damping and increase durability. Float EVOL Air Spring EVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL’s linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's Lower Leg channels and Bleeders (push-button bleeders available separately, which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference. Technologies: Performance Series: Performance Series forks retain the same black anodized 7000 series aluminum upper tubes as Performance Elite, except paired with a GRIP damper. Push-button bleeders are not included but can be purchased separately. Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional micro-adjust between settings Detents. Low-speed rebound 10 clicks. Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don’t want to bother with it, you can just install the front wheel and get on with your ride. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material. - Increased crown diameter to match modern frame shape profiles. - Optional mudguard with sturdy 4-point direct-mount attachment protects upper tubes and dust wipers from dirt and debris. (available separately). Manufacturer's Part Numbers: 910-20-206 Black 29" QR110 160mm 51mm 910-20-205 Black 29" QR110 160mm 44mm
Zipp s Vuka Shift AXS 90 is more than an aero extension it s a complete shifting system. Think of it as a supremely efficient solution to house the brains of your SRAM RED or Force eTap AXS time trial or triathlon bike. AXS Integrated Aerobar shifting systemLength is trimmable, 10mm at front and 90mm at rearIntegrated Garmin/Wahoo/Bryton computer mountCleans up aero cockpit for simplicity and optimized aero efficiencyThe Vuka Shift AXS 90 cleanly houses your aerobar extensions, shift-control, and head unit in one neat and clean package. This approach solves an emerging problem of the age of electronic shifting. The time for system integration is now, with this seamless solution. The extensions themselves feature the pro-proven Vuka Evo shape with a 90mm rise. The Vuka Shift AXS 90 is compatible with more than 90 percent of the integrated aerobar systems currently on the market.
Manitou R7 Pro Mountain Bike Suspension ForkThis versatile mountain bike (MTB) fork is equipped with 7000-series butted-wall aluminium legs, which allows it to deliver tremendous stiffness, strength and control on your off-road adventures. With a powerful Dorado Air spring with IVA, VTT Pro damper and Half Cartridge adjustable TPC rebound damping, it's ready for whatever the mountain has to offer. Manitou has also kitted out this version with a wide range of adjustments including three-position compression (Open, Trail, Lock) with Open Mode Adjust. This allows MTB and cross-country (XC) riders to benefit from a more rider-tuned feel that perfectly matches their style as well as the terrain conditions.VTT Pro DamperRock-solid lockout without compromise. Thanks to independent shim stacks you no longer need to lose sensitivity in your open positions to achieve a true lock-out. This means you can still crank climbs without bobbing and blast through rock gardens without shattering your forearms on the same ride.Dorado Air Spring with IVAAs the name suggests this air spring is derived from Manitou's legendary Dorado DH fork. Dorado air features a unique balancing valve that equalises pressure between the positive and negative air chambers during the air fill process. This provides the fork with a consistent feel without any flat or dead spots in the stroke. To manage the volume Manitou have included its Incremental Volume Adjust (IVA). The IVA is a self-contained volume reduction system that allows greater ramp-up change than conventional adjustment systems without the need for additional parts.Features: Leg Material: 7000-Series Butted Wall Aluminium Crown Material: Forged Aluminum, Deep Hollow Bore Axle: 15x110mm Hexlock Use: MTB, XC Steerer Diameter: 1.5" Tapered Leg Diameter: 32mm Spring: Dorado Air with IVA Compression Damping: VTT Pro Rebound Damping: Half Cartridge adjustable TPC Adjustments: Air, Rebound, 3-position Compression (Open, Trail, Lock) with Open Mode Adjust, IVA position Brake Post Mount: 160mm (203mm Max)Max Tyre Size: 68mm 77mm (27.5"+); 68mm (29")Offset: 37mm (27.5"); 44mm (27.5+/29")Ride Height: 471-511mm (27.5"); 485-525mm (27.5+/29")Travel: Multiple options available to selectE-Pac: No Weight: 1625g (27.5"); 1648g (27.5+/29")Technologies: VTT Pro Variable Terrain Tune - Adjustments: 3-Position Compression Adjust With Open Mode Adjust: When developing the VTT Pro damper Manitou set out with a goal to maintain a rock-solid lockout without compromising the open and mid settings. The downside to many dampers with firm lockout modes is that in any other position than lock-out you will reach some critical shaft velocity that choke off the low-speed flow path. When this happens the damper peaks at nearly the same lock-out force as the locked-out position. This translates to harsh force in the hands and possibly lack of control. The goal with VTT is to eliminate that high-speed spike while maintaining the lock-out force demanded by most XC users. This allows the fork to have a less progressive high-speed response while maintaining some low-speed support without getting wollowy. This is achieved thru independent shim stacks (one for Lockout, one for the other two positions). By controlling the shim stack through which the oil flow is diverted Manitou can manipulate the characteristic of the damper to be Lock-out, Digressive, or progressive to meet the demands of the rider and terrain. Dorado Air: For 32mm chassis Manitou are adapting its proven Dorado Air to fit the needs of shorter travel riders. The Manitou Dorado Air spring system contains a unique balancing valve that equalizes the positive and negative air chambers during the air fill process. This gives the spring rate a consistent feel without any flat or dead spots in the stroke, along with giving riders of different weights the same initial stroke feel. For R7 Manitou have tuned the volumes in each chamber to give ideal support and feel for shorter travel. Also included on the air leg is its Incremental Volume Adjust (IVA). The IVA modifies the volume in the positive air chamber with a set of self-contained spacers that dictate the fixed position of the IVA piston. This self-contained volume reduction system allows greater ramp-up change than conventional adjustment systems without the need for additional parts. Chassis: When developing the chassis of any Manitou fork the primary goal is finding the perfect balance of weight, stiffness, and reliability. Thanks to its Reverse Arch Manitou are able to position the arch further away from the axle. The lower tire clearance behind the fork relative to the center of the axle allows for a shorter arch which yields 13% increased stiffness compared to a conventional forward arch fork of the equivalent weight. Because of this, Manitou are able to use 32mm stanchions to save weight while keeping stiffness closer to that of a larger stanchion fork with a forward-facing arch.Buy Manitou Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Rockshox Pike receives a complete overhaul for 2023, that makes it lighter, tighter and ready to rip the trail. Teamed with a new DebonAir+ spring and Charger RC Damper, the Pike is the ultimate singletrack thrasher that's not afraid of an all-day epic on the biggest terrain around.All-new 35mm chassis is lighter but just as stiff and strong as previous designCharger RC damper provides smooth, consistent control and easy adjustabilityNew DebonAir+ spring gives a super supple ride over smaller bumpsSuitable for 110x15m axles - can be used with Torque Caps or standard hubsThe Pike is a true legend and is more capable than ever before while being lighter to boot; it truly blurs the line between XC and all-mountain forks. The all-new chassis is still based around 35mm stanchions, but is lighter than before while still being just as stiff and optimised around 120-140mm travel to suit the latest trail bikes. To back up the new chassis is the proven Charger RC damper with low-speed compression and rebound adjustment that provides effortless control and easily adjustability, so you can be sure that it will keep you wheel glued to the ground. Also new is the DebonAir+ spring which helps to iron out everything on the trail, from the smallest chatter through to the biggest hits. If you're looking for a lightweight fork that can still charge as hard as you dare, the Rockshox Pike is just for you.
The Rockshox Pike receives a complete overhaul for 2023, that makes it lighter, tighter and ready to rip the trail. Teamed with a new DebonAir+ spring and Charger RC Damper, the Pike is the ultimate singletrack thrasher that's not afraid of an all-day epic on the biggest terrain around.All-new 35mm chassis is lighter but just as stiff and strong as previous designCharger RC damper provides smooth, consistent control and easy adjustabilityNew DebonAir+ spring gives a super supple ride over smaller bumpsSuitable for 110x15m axles - can be used with Torque Caps or standard hubsThe Pike is a true legend and is more capable than ever before while being lighter to boot; it truly blurs the line between XC and all-mountain forks. The all-new chassis is still based around 35mm stanchions, but is lighter than before while still being just as stiff and optimised around 120-140mm travel to suit the latest trail bikes. To back up the new chassis is the proven Charger RC damper with low-speed compression and rebound adjustment that provides effortless control and easily adjustability, so you can be sure that it will keep you wheel glued to the ground. Also new is the DebonAir+ spring which helps to iron out everything on the trail, from the smallest chatter through to the biggest hits. If you're looking for a lightweight fork that can still charge as hard as you dare, the Rockshox Pike is just for you.
The Rockshox Pike receives a complete overhaul for 2023, that makes it lighter, tighter and ready to rip the trail. Teamed with a new DebonAir+ spring and Charger RC Damper, the Pike is the ultimate singletrack thrasher that's not afraid of an all-day epic on the biggest terrain around.All-new 35mm chassis is lighter but just as stiff and strong as previous designCharger RC damper provides smooth, consistent control and easy adjustabilityNew DebonAir+ spring gives a super supple ride over smaller bumpsSuitable for 110x15m axles - can be used with Torque Caps or standard hubsThe Pike is a true legend and is more capable than ever before while being lighter to boot; it truly blurs the line between XC and all-mountain forks. The all-new chassis is still based around 35mm stanchions, but is lighter than before while still being just as stiff and optimised around 120-140mm travel to suit the latest trail bikes. To back up the new chassis is the proven Charger RC damper with low-speed compression and rebound adjustment that provides effortless control and easily adjustability, so you can be sure that it will keep you wheel glued to the ground. Also new is the DebonAir+ spring which helps to iron out everything on the trail, from the smallest chatter through to the biggest hits. If you're looking for a lightweight fork that can still charge as hard as you dare, the Rockshox Pike is just for you.
The Rockshox Pike receives a complete overhaul for 2023, that makes it lighter, tighter and ready to rip the trail. Teamed with a new DebonAir+ spring and Charger RC Damper, the Pike is the ultimate singletrack thrasher that's not afraid of an all-day epic on the biggest terrain around.All-new 35mm chassis is lighter but just as stiff and strong as previous designCharger RC damper provides smooth, consistent control and easy adjustabilityNew DebonAir+ spring gives a super supple ride over smaller bumpsSuitable for 110x15m axles - can be used with Torque Caps or standard hubsThe Pike is a true legend and is more capable than ever before while being lighter to boot; it truly blurs the line between XC and all-mountain forks. The all-new chassis is still based around 35mm stanchions, but is lighter than before while still being just as stiff and optimised around 120-140mm travel to suit the latest trail bikes. To back up the new chassis is the proven Charger RC damper with low-speed compression and rebound adjustment that provides effortless control and easily adjustability, so you can be sure that it will keep you wheel glued to the ground. Also new is the DebonAir+ spring which helps to iron out everything on the trail, from the smallest chatter through to the biggest hits. If you're looking for a lightweight fork that can still charge as hard as you dare, the Rockshox Pike is just for you.
The Rockshox Pike receives a complete overhaul for 2023, that makes it lighter, tighter and ready to rip the trail. Teamed with a new DebonAir+ spring and Charger RC Damper, the Pike is the ultimate singletrack thrasher that's not afraid of an all-day epic on the biggest terrain around.All-new 35mm chassis is lighter but just as stiff and strong as previous designCharger RC damper provides smooth, consistent control and easy adjustabilityNew DebonAir+ spring gives a super supple ride over smaller bumpsSuitable for 110x15m axles - can be used with Torque Caps or standard hubsThe Pike is a true legend and is more capable than ever before while being lighter to boot; it truly blurs the line between XC and all-mountain forks. The all-new chassis is still based around 35mm stanchions, but is lighter than before while still being just as stiff and optimised around 120-140mm travel to suit the latest trail bikes. To back up the new chassis is the proven Charger RC damper with low-speed compression and rebound adjustment that provides effortless control and easily adjustability, so you can be sure that it will keep you wheel glued to the ground. Also new is the DebonAir+ spring which helps to iron out everything on the trail, from the smallest chatter through to the biggest hits. If you're looking for a lightweight fork that can still charge as hard as you dare, the Rockshox Pike is just for you.
The Rockshox Pike receives a complete overhaul for 2023, that makes it lighter, tighter and ready to rip the trail. Teamed with a new DebonAir+ spring and Charger RC Damper, the Pike is the ultimate singletrack thrasher that's not afraid of an all-day epic on the biggest terrain around.All-new 35mm chassis is lighter but just as stiff and strong as previous designCharger RC damper provides smooth, consistent control and easy adjustabilityNew DebonAir+ spring gives a super supple ride over smaller bumpsSuitable for 110x15m axles - can be used with Torque Caps or standard hubsThe Pike is a true legend and is more capable than ever before while being lighter to boot; it truly blurs the line between XC and all-mountain forks. The all-new chassis is still based around 35mm stanchions, but is lighter than before while still being just as stiff and optimised around 120-140mm travel to suit the latest trail bikes. To back up the new chassis is the proven Charger RC damper with low-speed compression and rebound adjustment that provides effortless control and easily adjustability, so you can be sure that it will keep you wheel glued to the ground. Also new is the DebonAir+ spring which helps to iron out everything on the trail, from the smallest chatter through to the biggest hits. If you're looking for a lightweight fork that can still charge as hard as you dare, the Rockshox Pike is just for you.
The Rockshox Pike receives a complete overhaul for 2023, that makes it lighter, tighter and ready to rip the trail. Teamed with a new DebonAir+ spring and Charger RC Damper, the Pike is the ultimate singletrack thrasher that's not afraid of an all-day epic on the biggest terrain around.All-new 35mm chassis is lighter but just as stiff and strong as previous designCharger RC damper provides smooth, consistent control and easy adjustabilityNew DebonAir+ spring gives a super supple ride over smaller bumpsSuitable for 110x15m axles - can be used with Torque Caps or standard hubsThe Pike is a true legend and is more capable than ever before while being lighter to boot; it truly blurs the line between XC and all-mountain forks. The all-new chassis is still based around 35mm stanchions, but is lighter than before while still being just as stiff and optimised around 120-140mm travel to suit the latest trail bikes. To back up the new chassis is the proven Charger RC damper with low-speed compression and rebound adjustment that provides effortless control and easily adjustability, so you can be sure that it will keep you wheel glued to the ground. Also new is the DebonAir+ spring which helps to iron out everything on the trail, from the smallest chatter through to the biggest hits. If you're looking for a lightweight fork that can still charge as hard as you dare, the Rockshox Pike is just for you.
The Rockshox Pike receives a complete overhaul for 2023, that makes it lighter, tighter and ready to rip the trail. Teamed with a new DebonAir+ spring and Charger RC Damper, the Pike is the ultimate singletrack thrasher that's not afraid of an all-day epic on the biggest terrain around.All-new 35mm chassis is lighter but just as stiff and strong as previous designCharger RC damper provides smooth, consistent control and easy adjustabilityNew DebonAir+ spring gives a super supple ride over smaller bumpsSuitable for 110x15m axles - can be used with Torque Caps or standard hubsThe Pike is a true legend and is more capable than ever before while being lighter to boot; it truly blurs the line between XC and all-mountain forks. The all-new chassis is still based around 35mm stanchions, but is lighter than before while still being just as stiff and optimised around 120-140mm travel to suit the latest trail bikes. To back up the new chassis is the proven Charger RC damper with low-speed compression and rebound adjustment that provides effortless control and easily adjustability, so you can be sure that it will keep you wheel glued to the ground. Also new is the DebonAir+ spring which helps to iron out everything on the trail, from the smallest chatter through to the biggest hits. If you're looking for a lightweight fork that can still charge as hard as you dare, the Rockshox Pike is just for you.