DMR Simple Tension SeekerChange your bike from gears to a single speed, all thanks to the Simple Tension Seeker from DMR. Suitable for Street Dirt Jumping and Trials, this handy tool tensions the chain after being clamped in place.Designed to run with a geared chain, this limits the cost of going single speed on your existing geared mountain bike, remove your shifters and mechs, fit the STS behind your quick release (please note not for nutted axles) and you're ready to ride. Features:Use: Mountain Bike (MTB)Weight: 103gBuy DMR Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
DMR Vault Limited Edition MTB Flat PedalsWhether you're into all mountain riding or downhill racing, this high-quality flat pedal ensures that you'll benefit from a stable and dependable grip wherever your next ride takes you. It features a rock-solid extruded 6061 aluminium construction, which allows it to handle all the knocks and bumps associated with all-day epics in the mountains. DMR has also equipped it with 4140 chromoly (CrMo) steel axles, so riders can enjoy its exceptional strength with every rotation. Coming kitted out with a triple-anodised finish, this model provides fantastic wear resistance as well as additional protection against corrosion when tackling the trails in all-weather conditions.Limited Edition Vault Pedals with Liquid Camo FinishComing as a pair, this limited edition pedal stands out from the crowd with a very special Liquid Camo finish. It's part of a special series of products from DMR, where the brand has taken its much-loved Vault pedals and enhanced them with a durable triple-anodised finish. This makes it more than capable of handling the demands of long days on the trails as well as providing an eye-catching design that complements any ride.Tuneable Mountain Bike (MTB) Flat PedalOffering 11 pins per pedal, this MTB flat pedal uses flip pins to fine-tune the grip. This means that riders will benefit from a strong and secure grip as they power through challenging and unpredictable terrains at speed. Specifically designed for riders who want a bigger platform, the DMR Vault Limited Edition Pedal is equally at home on an all mountain setup as it is on a downhill ride.Features: Material: Extruded 6061 Aluminium and 4140 Chromoly (CrMo) Steel axles (9/16") Finish: Triple-anodised, Liquid Camo Use: MTB, Downhill Platform Dimensions: 105x115mm Concave Foot Bed: 17mm Pins Per Pedal: 11 (flip the pins to fine-tune the grip) Type: Flat pedals High load DU bush and cartridge bearing Single or Pair: Pair Manufacturer's Part Number: DMR-VAULT-GC Weight: 430g (per pedal)Buy DMR Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
DMR Axe Cranks Limited EditionWhether you're into all mountain (AM), Downhill (DH) or enduro riding, these award-winning cranks are engineered for strong and reliable pedalling performance. They feature a forged aluminium construction, which makes them more than capable of handling all the intensity that's associated with all-day epics on your favourite trail routes. With three MBUK Best MTB Crank titles to their name, DMR has also kitted out these limited edition cranks with a higher-level finish that includes laser-etched graphics, making them look as awesome as they perform on your ride.Lightweight MTB Cranks with Hollowform TechnologyThese DMR cranks have the strength needed for the biggest downhill (DH) hits combined with the weight of race-ready enduro cranks. Boasting crank arms that use Hollowform technology, each hollow-forged crank arm is designed to achieve unrivalled stiffness and strength without any weight penalty. The DMR Axe Cranks Limited Edition are strong and versatile enough to fit any all mountain (AM), enduro or downhill (DH) set up.The DMR Axe LE cranks feature a sturdy 30mm axle to ensure there is no flex between your crank arms and they are supplied as crank arms only, so you can assemble your cranks to your specification.DMR recommend pairing the Axe cranks with its DMR Blade chainrings which are available separately in all common sizes, along with Boost and Standard chainline options. These cranks are also compatible with any SRAM style direct-mount pattern chainring of your choice. A Direct Mount spider is available for 2x setups.The DMR Axe LE cranks must be fitted with a DMR Axe BB, which are available separately in 68/73mm or 83mm threaded, BB30, PF30 and BB92 formats.Features: Material: Forged Aluminium Finish: Laser Etched Use: Mountain Bike (MTB), All Mountain (AM), Downhill (DH) and Enduro Axle: 30mm Q-Factor: 176mm SRAM style direct mount compatible Weight: 790gManufacturer's Part Numbers: DMR-C-AXEARMS-PL-165 Polished Silver 165mm DMR-C-AXEARMS-PL-170 Polished Silver 170mm DMR-C-AXEARMS-PL-175 Polished Silver 175mmBuy DMR Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
DMR Defy35 Limited Edition MTB StemThis limited edition stem features a robust 6061 alloy construction, which gives you a secure and dependable connection between your handlebars and your fork's steerer tube. DMR has also put this version through its CNC-machining process, which shaves off any unnecessary material while still maintaining its strength. This means that you'll benefit from its exceptional durability without worrying about adding any excess grams to your ride. With a wide clamping area and a Top-Close clamp design, this model offers increased bar stability and its stubby length pairs well with aggressive modern mountain bike (MTB) geometry.Limited Edition Stem with DMR Liquid Camo FinishPart of DMR's special edition Liquid Camo series, this MTB stem is kitted out with a triple-anodised finish. This makes it extremely tough, wear-resistant and protected against corrosion when shredding the trails in all-weather conditions. Coming equipped with eye-catching camo graphics, it looks as amazing as it performs while also complementing your ride.Features: Material: CNC-machined 6061 Alloy Finish: Triple-anodised, Liquid Camo Use: MTB Dimensions: 85mm Long / 53mm Wide / 54mm Tall Stack Height: 27mm Reach: 35mm Rise: 5mm Included: Stem cap Top-Close clamp design Weight: 176gBuy DMR Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
DMR Defy35+ Limited Edition StemThis special edition mountain bike (MTB) stem boasts a tough 6061 alloy construction with a triple anodised finish to hold your steering set-up together securely on the most demanding of trail conditions. DMR has also put this model through its CNC-machining process to shave off any unnecessary excess material, while still maintaining maximum toughness. As a result, it delivers an impressive strength to weight ratio, weighing in at only 176g. Offering unique style to complement any ride, this model is also equipped with stunning liquid camo graphics for giving your mountain bike a sleek finish.The DMR Defy 35+ is the perfect Stem for your trail/all mountain build. It features a low stack height, Top-Close clamp design, 35mm reach and 5mm rise. The Defy 35+ Stem has a wide, 35mm diameter clamping area for handlebar stability and security, combined with a short length, which pairs well with aggressive modern geometry.Stand out from the crowd with the Special Edition series from DMR. The brand has taken its much-loved Defy 35+ Stem and enhanced it with a durable triple anodised finish. Opt for the Special Edition Wingbar and Vault Pedals (available separately) to fully drench your bike in liquified camouflage.Features: Material: CNC-machined 6061 Alloy Use: Mountain Bike (MTB) Clamp Diameter: 35mm Stack Height: 27mm Reach: 35mm Rise: 5mm Dimensions: Length: 85mm; Width: 53mm; Height: 54mm Stem Cap Included: Yes Top-Close clamp design Weight: 176gManufacturer's Part Number: DMR-STM-DEFY2-35+CA Buy DMR Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
DMR Wingbar Limited Edition MTB HandlebarBoasting a 7075 heat-treated and double-butted alloy construction, this limited edition mountain bike (MTB) handlebar is engineered to meet the demands associated with long days in the mountains. DMR has also kitted out this version with a triple-anodised finish that makes it exceptionally tough, wear-resistant and protected against corrosion when riding in all-weather conditions. Part of the special edition Liquid Camo series, this model features eye-catching camo graphics, which makes it look as awesome as it performs while also complementing any ride.Limited Edition Handlebar with DMR Team Rider DesignReady for all-day epics on the MTB trails, this limited edition handlebar was developed with DMR's team riders including Olly Wilkins. Its wingbar shape features five degrees upsweep to stop it feeling flat or droopy and its eight degrees backsweep is optimal for stand-up riding and also allows for a relaxed seated position. Available in 800mm width, 35mm clamp only.Features: Material: 7075 heat-treated and double-butted Alloy Finish: Triple-anodised, Liquid Camo Use: MTB Clamp: 35mm Rise: 20mm Upsweep: 5 degrees Backsweep: 8 degrees Limited EditionBuy DMR Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
DMR Wingbar Limited Edition MTB HandlebarBoasting a 7075 heat-treated and double-butted alloy construction, this limited edition mountain bike (MTB) handlebar is engineered to meet the demands associated with long days in the mountains. DMR has also kitted out this version with a triple-anodised finish that makes it exceptionally tough, wear-resistant and protected against corrosion when riding in all-weather conditions. Part of the special edition Liquid Camo series, this model features eye-catching camo graphics, which makes it look as awesome as it performs while also complementing any ride.Limited Edition Handlebar with DMR Team Rider DesignReady for all-day epics on the MTB trails, this limited edition handlebar was developed with DMR's team riders including Olly Wilkins. Its wingbar shape features five degrees upsweep to stop it feeling flat or droopy and its eight degrees backsweep is optimal for stand-up riding and also allows for a relaxed seated position. Available in 800mm width, 35mm clamp only.Features: Material: 7075 heat-treated and double-butted Alloy Finish: Triple-anodised, Liquid Camo Use: MTB Clamp: 35mm Rise: 20mm Upsweep: 5 degrees Backsweep: 8 degrees Limited EditionBuy DMR Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The DMR Defy 35 stem is the perfect MTB stem for your Trail/All mountain build. This DMR defy mountain bike stem features a low stack height, Top-Close clamp design, 35mm reach and 5mm rise. This DMR Defy stem has wide clamping area for bar stability and stubby length to pair well with aggressive modern geometry.Key Features:CNC 6061 Alloy,27mm Stack height,35mm reach,5mm rise,176g.
Our DMR Alloy Mk4 Wingbar shouts a graphics refresh on the successful Mk3 Alloy MTB Wingbar but retains all its proven specification. Made from heat treated 7075 alloy, this mountain bike handlebar is light, stiff and strong.This DMR alloy wingbar's shape was developed with our team riders and Olly Wilkins in particular. The 5 degrees upsweep stops the wingbar feeling flat or ‘droopy’ and the 8 degrees backsweep is optimal for stand up riding and also allows a relaxed seated position. Available at 780mm or 800mm width.Key Features: 7075 heat treated, double butted Alloy., 31.8mm & 35mm Clamp options., 780mm & 800mm width options., 20mm/35mm rise options., 5 degree upsweep., 8 degree backsweep.,.
Super Soft 'Race Day' Compound.The DMR DEATHGRIP RACE EDITION grip is the second collaboration between DMR and Brendog.We started with an internally tapered single-lock core grip and wrapped Brendan's design around it in secret super-soft 'Race Day' compound. Key Features:Super Soft 'RACE DAY' Compound | Secret Super-Tacky Formula • Tapered Core | No need for outer lock ring,Single Lock Ring | Torque to 2nM • Waffle and Knurl for grip,Mushroom for comfort,Available in Thin (ø29.8) or Thick (ø31.3).
Dryrobe compression travel bag - The ultimate way to compress the warmest change robe in the World into the smallest size to travel.Now you can easily pack your dryrobe for any flight or trip where space is limited. *Packs to approx 30cm length & 20 cm wide & 8-10 cm high. depending on tightness of straps. Simply stuff the dryrobe in the bag, hood first, rollover & clip the top, undo the valve, squash all of the air out by kneeling on the dryrobe, (or using a vacuum cleaner), then pull the compression straps tight & re-seal the valve.Removing the air allows the straps. The bag is not designed to be air tight or submersible, air will slowly re-enter the bag but it will remain extremely compact.This really works!Made from a robust waterproof nylon fabric with sealed seams throughout and a padded shoulder carry strap.Perfect for travel & packing dryrobe in a larger travel bag to save space.Highly water resistant, *Not submersible.
The DT Competition is the classic lightweight spoke used by most of the world's best wheel builders, perfect for all round use and now in a distinctive white finish. The 14 / 15 gauge double butted spoke is 1.8 mm thick in the centre to save weight, but 2 mm thick at the end where strength is needed, the butting process even adds strength through cold forging. DT Competition spokes are made from X5 stainless steel, containing chrome for rust resistance and nickel for strength. The rolling of the nipple thread removes no metal from the spoke and preserves the grain of the material, further adding to the overall strength.Supplied Individually and without nipplesWeight: 6 grams for 64 x 264 mm length spoke (single spoke supplied)