The Shimano Claris 8 Speed Rear derailleur is built for 8 Speed road drivetrains. This derailleur features an advanced light action for low-friction shifting up or down the block. Key Features:Wide link design for increased rigidity and precise gear shifts,For use with triple setups,Compatible with 8-speed drivetrains,Max sprocket sizes: 28-34T,.
Replacement Di2 wire for Shimano Di2 systems. The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts.E-tube STEPS EP8 uses a fully removable individual cable system enabling fine tuning with the correct cable length to each component for easy and tidy fitmentEW-SD300 wires use a slim 3.45 mm diameter plug, they can be connected to EW-SD50 wires with the use of EW-AD305 adapterEW-SD300 individual wires are available in varying lengths, there is no need (or facility) to cut these cablesReliable and secure water resistant connectors
Replacement Di2 wire for Shimano Di2 systems. The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts.E-tube STEPS EP8 uses a fully removable individual cable system enabling fine tuning with the correct cable length to each component for easy and tidy fitmentEW-SD300 wires use a slim 3.45 mm diameter plug, they can be connected to EW-SD50 wires with the use of EW-AD305 adapterEW-SD300 individual wires are available in varying lengths, there is no need (or facility) to cut these cablesReliable and secure water resistant connectors
Replacement Di2 wire for Shimano Di2 systems. The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts.E-tube STEPS EP8 uses a fully removable individual cable system enabling fine tuning with the correct cable length to each component for easy and tidy fitmentEW-SD300 wires use a slim 3.45 mm diameter plug, they can be connected to EW-SD50 wires with the use of EW-AD305 adapterEW-SD300 individual wires are available in varying lengths, there is no need (or facility) to cut these cablesReliable and secure water resistant connectors
For internal DI2 wire routing, Shimano's SM-JC41 Junction B is the central connector for DI2 systems. Wires from the front and rear derailleurs, cockpit area, and battery all plug into the 4-port SM-JC41 junction, which is housed inside the bike frame.SM-JC41 E-tube cable junction for internal wire routingJunction is required for connection of rear mech, front mech, battery, and cable to battery indicator junction boxTo be positioned neatly inside frame tubing when connectedCables sold separatelyReliable and secure water resistant connectors
Shifting performance has helped Full Speed Ahead to become a world leader for high-end chainrings. No one studies the design and manufacturing of each system, and each tooth, as carefully as FSA do. FSA's dedication shows in every revolution of the crank, and every perfect shift achieved. To meet or exceed the needs of any drivetrain, FSA has developed sophisticated design, testing and manufacturing protocols. This allows FSA to match your needs as perfectly as their chainrings match a chain. The FSA Alloy Road chainring is made from hard-wearing AL7075 T6 alloy and it is ramped and pinned, so you get top-notch shifting quality every time. This model is compatible with Shimano 10/11-speed cranksets, giving brilliant acceleration and smooth shifts every time. Chainrings are sold individually, not as a pair.
Shimano Tiagra R451 Road Brake CaliperThis 57mm drop Road Brake Caliper from Shimano features quality construction that is known to last and out-perform. Made from durable and lightweight aluminium with a robust anodised finish, this model prevents friction, offering you enhanced braking for exceptional balance and control. Features:Super SLR dual pivot design keeps operating friction to a minimum, improving braking performanceEnhanced brake arch proportions give a quicker linear response and increased powerToe-in adjustable brake shoes for perfect pad alignmentDurable quick release for fast and easy wheel removalComes with 10.5/12.5/18 and 27mm sunken nutPart No: BR-R451Material: Lightweight aluminium caliper design with tough anodised finishBrake mount: Super SLR Dual PivotDrop: 57mmCompatibility: Must be used in conjunction with ST-4600, ST-4603, ST-5700, ST-5703, ST-6700 or ST-7900 STIs for correct leverage ratioA 2-year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Shimano Sora BR-R3000 Brake CaliperEnjoy reliable braking control with this Brake Caliper from Shimano. Made from lightweight and hard-wearing aluminium, this brake is ready to navigate technical routes and fast cornering and has been developed for long-lasting quality, no matter what challenge you meet on the road. Features:Material: AluminiumBrake Type: New Super SLR Dual PivotReach: 51mmMaximum Tyre Size: 28cWeight: 379gPart No: BR-R3000Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Shimano Alivio T4000 Trekking V-Brake LeversEnjoy reliable and smooth braking with these durable yet lightweight aluminium V-Brake Levers from Shimano. Designed with Trekking in mind, they offer a quiet and smooth ride, no matter how tough the terrain gets. Features:Use: TrekkingBrake Compatibility: V-BrakeBrake Lever Size: 2-fingerReach Adjuster: With toolClamp Diameter: 22.2mmCable Adjuster: Without toolOpen clamp: NoLever material: AluminiumMaterial holder: AluminiumSingle or Pair: PairA 2-year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Shimano JC304 SD300 4 Port Junction BoxThe JC304 SD300 4 Port Junction Box from Shimano is a 4-Port junction connector for use with Shimano EP8 Steps electric motor drive (E-Bike) and the Shimano E-Tube system.Shimano E-Tube Compatible Junction BoxE-Tube is Shimano's “service” that uses websites or apps to maximize the enjoyment of riding a bicycle by connecting the riders, the bicycles and Shimano. Shimano's genuine application E-Tube Project for Mobile allows you to customize your bike, update firmware, and maintain it by connecting it wirelessly to your bike. You can also get more detailed bike maintenance by connecting to your bike by wire with E-Tube Project via the Windows V4 application.Features: Shimano - E-TUBE - 4-Port Junction Series: EP8 EP800 Series Internal 2-Port Junction for EW-SD300 Shimano Part Number: EW-JC304A 2-year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Shimano K04TI Metal Disc Brake PadsThe Shimano K04TI Metal Disc Brake Pads are a pair of high-quality disc brake pads with a steel backplate and metal compound. These pads are also compatible with a wide range of Shimano hydraulic disc brakes.Features: Pair of Shimano replacement pads (for one brake) Steel back plate with metal braking compound Complete with spring A newer version of the older K03Ti pads Manufacturer Part Number: BPK04TIMXCompatible Models: BR-R9170 BR-R8070 BR-RS805 BR-RS505 BR-RS405 BR-RS305 BR-U5000Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Shimano N03A Resin Disc Brake Pad With FinsThe N03A Resin Disc Brake Pad With Fins are ideally suited for handling the rigours of mountain bike (MTB) riding as they offer consistent braking performance in all weather conditions.Ready for fast downhill runs when you're heavy on the brakes, these superb pads feature a resin surface construction for quieter stopping modulation while their stainless steel back plate delivers effective reliability. Coming complete with cooling fins, these are a perfect choice of a replacement for enjoying longer pad life and less brake fade on your adventures.Features: Surface Material: Resin Back Plate Material: Stainless Steel Cooling Fin Material: Aluminium Use: MTB Compatibility: Shimano XTR BR-M9120 Part Number: BPN03ARFCompatible Models: BR-M9120, BR-M8120, BR-M7120Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.