All new LED head light with 3 powerful LED’s and 180 degree visibility.• Triple LED with Opticube lens technology• All-round visibility• 3 modes: Rapid / Flash / Constant• Runtimes: 50hr / 150hr / 50hr• Flextight bracket and belt clip includedCateye Omni 3 Tl-ld135 3 Led Rear Cycle Light -All new LED Tail light with 3 powerful LED’s and 360 degree visibility.• Triple LED with Opticube lens technology• All-round visibility• 3 modes: Rapid / Flash / Constant• Runtimes: 200hr / 150hr / 100hr• Flextight bracket and belt clip included - See more at: http://www.cyclestore.co.uk/beta/productDetails.asp?productID=56887&categoryID=107#sthash.fhznhWJU.dpuf
This MTB front mech features a tough alloy construction with a reinforced steel chain guide, which makes it more than ready for any off-road ride. Developed with modern trail bikes in mind, Shimano has kitted out this version with Side Swing technology, which increases tyre clearance while its cable routing results in the lightest shifting action yet. Part Number: Direct Mount: FDM4100D4; E-Type: FDM4100E4; Low Clamp: FDM4100MX4 Technologies: Side Swing: Side swing, side pull front derailleur decrease problems with tyre clearance and reduces cable friction. Designed specifically with modern trail bikes in mind, Shimano side swing technology front derailleurs increases tyre clearance, while cable routing resulting in the lightest shifting action yet. Wide Pivot Link: Wide pivot link design for greater torsional rigidity improves shifting response and service life.
Our insanely minimalist Click Light set is incredibly visible to drivers, yet nearly invisible on your bike.Key Features:Product Weight: 37 grams (front 17g, rear 20g) ,ANSI Standard: This standard was created by the American National Standards Institute (ANSI) to provide consistent performance measurements for handheld lights. ,Brightness: 20 lumens front, 4 lumens rear ,Run Time: ,Steady mode: front 70 hours at 20 lumens, rear 70 hours at 4 lumens,Flash mode: front and rear 130 hours at 4 lumens.Water Resistance: IP-65 submersible - Ingress protection rating or "IP Rating," is a techy way to describe the level of water- and dust-proofness of a product. This light meets the IP-65 Standard, which means it is totally protected against dust/grit and protected against low-pressure water jets from any direction. ,Mounting Options: Versatile silicone mounting system fits diameters 15–35mm, No tools required ,Power Source: 2 CR2032 coin cell batteries for each light,.
Shimano M4100 Deore 10Sp Double Front DerailleurBringing even more adventure to your outdoor lifestyle, this front mech offers improved chain stability and sharp shifting on the trails. It features a robust alloy construction with a reinforced steel chain guide, which makes it more than ready for any off-road ride. Designed with modern trail bikes in mind, Shimano has equipped this model with Side Swing technology, which increases tyre clearance while its cable routing results in the lightest shifting action yet.Features: Front Mech Material: Alloy Chain Guide Material: Reinforced Steel Use: MTB Speed: 10 speed Mounting Options: Direct mount, E-type and Low Clamp options available to select Chainline: Chainline both 48.8/51.8mmMax Chainring: For double 38 tooth max chainringPivot Link: Wide pivot link designCable Routing: Side pull cable routing Single or Pair: Single Part Number: Direct Mount: FDM4100D4; E-Type: FDM4100E4; Low Clamp: FDM4100MX4Technologies: Side Swing: Side swing, side pull front derailleur decrease problems with tyre clearance and reduces cable friction. Designed specifically with modern trail bikes in mind, Shimano side swing technology front derailleurs increases tyre clearance, while cable routing resulting in the lightest shifting action yet. Wide Pivot Link: Wide pivot link design for greater torsional rigidity improves shifting response and service life.A 2-year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Shimano SLX M7100 E 2x12 Speed Front DerailleurThis stunning 12 speed front mech is perfect for MTB use as it helps you to maintain your focus and fun on rough, uneven terrain. It features an extra wide range for increased traction and no chain rub for longer travel bikes. Shimano has also included greater tyre clearance and wider rim compatibility, making it an ideal upgrade for riders who want smoother shifting performance with 2.3" tyres. Features: Material: Alloy Use: MTB Speed: 12 speed Action: Side Swing Cable Route Type: Front pull Top Gear Teeth: 36-26T Total Capacity: 10T Compatible Chain: HG 12 speed Compatible with 2.3" tyres on wider rimsTechnologies:Side Swing: Horizontal movement follows the chain direction for smooth & efficient front shifting effort.A 2-year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Blackburn's insanely minimalist Click Light Set is incredibly visible to drivers yet nearly invisible on your bike. A simple 'click' of the lens will power up 2 LEDs that pump out 18 lumens of beautiful bright light that is even visible from the side of your bike for cross traffic. SIMPLY STRONG. The silicone mounting strap makes it easy to install/remove and works on pretty much any handlebar or bike frame from 15-35mm. Ingress protection rating or 'IP Rating' is a techy way to describe the level of water and dust-proofness a product has. This light meets the IP-65 Standard which means it is totally protected against dust/grit and fully resists strong jets of water from all directions. Two CR2032 coin cell batteries are included and are super-easy to replace. SPECS Brightness 20 lumens front 4 lumens rear Battery Type CR2032 Mounting Options Versatile silicone mounting system fits diameters 15–35mm No tools required Product Weight 37 grams (front 17g rear 20g) Run Time Steady mode: front 70 hours at 20 lumens rear 70 hours at 4 lumens Flash mode: front and rear 130 hours at 4 lumens Water Resistance IP-65 submersible - Ingress protection rating or "IP Rating" is a techy way to describe the level of water- and dust-proofness of a product. This light meets the IP-65 Standard which means it is totally protected against dust/grit and protected against low-pressure water jets from any direction. Manual(s) bbn-click-light-manual
The Blinder MINI has three characters in the gang. Dot with a single powerful LED. Niner , so called for its array of 9 LEDs. And Chippy , with Chips on Board technology giving a panel of light. These surface mounted LEDs punch well above their weight, with the 20/11 lumens for front/rear getting you seen from over 500m away. Niner and Chippy have reflected faces for added safety, and Dot, vain as she is, has a faceplate for added style and comes in 4 colours. With a weight of only 15 grams the light uses its tool-less attachment to securely connect to handlebars and frames of 22-32+mm. Specifications: Dimensions: 46x43x30mm Weight: 15g Materials: UV-Resistant Industrial grade silicone, Polycarbonate Housing, Optical grade PMMA Lens, Hard-Anodised aluminium fascia. USB Rechargeable Lithium Polymer Battery (USB). This saves using about 600 AAA Alkaline batteries during the light's lifetime. LEDs: Efficient LEDs designed to provide maximum brightness level for up to 90% of the battery burn time for each mode. Rather than LED brightness deteriorating during your ride Battery: Rechargeable Lithium polymer battery via integrated USB plug. Peak brightness: Front: 20 Lumens, Rear: 11 Lumens 5 Light modes: 1. Steady, 2. Strobe Flash, 3. Fading Flash, 4. Lightning Flash, 5. Eco Flash. Run-time: Blinder MINI front models last 1.8-2.5 hours in Steady mode, 3.5-4 hours in Strobe Flash, 3-3.8 hours in Fading Flash, 3.5 hours in Lightning Flash and 10-11.5 hours in Eco Flash. Blinder MINI rear models last 1.8-2.2 hours in Steady mode, 3.5 hours in Strobe Flash, 3-3.2 hours in Fading Flash, 3-4.5 hours in Lightning Flash, 10.5-11 hours in Eco Flash. 100% Waterproof: The Blinder MINI is IP67 Tested and 100% waterproof against all elements Beam angles (degrees): 20° (Dot), 90° (Niner), 120° (Chippy) Bar Diameters: Fits bars / posts 22-32mm+ and aero. Features: Lens: Use of an optic design to provide a balanced ratio of beam width and distance to safely illuminate you and the path ahead. Visibility: Light is visible over 500 metres Low battery indicator Integrated USB Plug Designed to be exposed to the elements, is waterproof and will not be damaged by exposure. Replaceable strap for tool-less attachment. 2x removable FRONT light straps for bars 22-27mm / 27-32mm and 3x removable REAR light straps for posts 22-32mm+ and AERO POST COMPATIBLE Charge time: 2.5 hours Charge Type: Via integrated USB plug. Waterproof, tough and can be plugged in directly - no need for cable. Button: Longer button push on (0.75sec) prevents accidental activation of your light. Short presses switch modes continuously. Similarly, the light is switched off with a long button push off (0.5sec). Battery storage mode provides the best longevity for your Blinder light. Repeat this procedure every 3 months thereafter if the light isn't being used. Refer to the instructions online. Testing: The Blinder MINI has been tested against the following; Drop tests, corrosion tests, UV tests, Electrical shock and static, vibration and impact, temperature and humidity, cycle testing and CE certification.
The Blinder MINI has three characters in the gang. Dot with a single powerful LED. Niner , so called for its array of 9 LEDs. And Chippy , with Chips on Board technology giving a panel of light. These surface mounted LEDs punch well above their weight, with the 20/11 lumens for front/rear getting you seen from over 500m away. Niner and Chippy have reflected faces for added safety, and Dot, vain as she is, has a faceplate for added style and comes in 4 colours. With a weight of only 15 grams the light uses its tool-less attachment to securely connect to handlebars and frames of 22-32+mm. Specifications: Dimensions: 46x43x30mm Weight: 15g Materials: UV-Resistant Industrial grade silicone, Polycarbonate Housing, Optical grade PMMA Lens, Hard-Anodised aluminium fascia. USB Rechargeable Lithium Polymer Battery (USB). This saves using about 600 AAA Alkaline batteries during the light's lifetime. LEDs: Efficient LEDs designed to provide maximum brightness level for up to 90% of the battery burn time for each mode. Rather than LED brightness deteriorating during your ride Battery: Rechargeable Lithium polymer battery via integrated USB plug. Peak brightness: Front: 20 Lumens, Rear: 11 Lumens 5 Light modes: 1. Steady, 2. Strobe Flash, 3. Fading Flash, 4. Lightning Flash, 5. Eco Flash. Run-time: Blinder MINI front models last 1.8-2.5 hours in Steady mode, 3.5-4 hours in Strobe Flash, 3-3.8 hours in Fading Flash, 3.5 hours in Lightning Flash and 10-11.5 hours in Eco Flash. Blinder MINI rear models last 1.8-2.2 hours in Steady mode, 3.5 hours in Strobe Flash, 3-3.2 hours in Fading Flash, 3-4.5 hours in Lightning Flash, 10.5-11 hours in Eco Flash. 100% Waterproof: The Blinder MINI is IP67 Tested and 100% waterproof against all elements Beam angles (degrees): 20° (Dot), 90° (Niner), 120° (Chippy) Bar Diameters: Fits bars / posts 22-32mm+ and aero. Features: Lens: Use of an optic design to provide a balanced ratio of beam width and distance to safely illuminate you and the path ahead. Visibility: Light is visible over 500 metres Low battery indicator Integrated USB Plug Designed to be exposed to the elements, is waterproof and will not be damaged by exposure. Replaceable strap for tool-less attachment. 2x removable FRONT light straps for bars 22-27mm / 27-32mm and 3x removable REAR light straps for posts 22-32mm+ and AERO POST COMPATIBLE Charge time: 2.5 hours Charge Type: Via integrated USB plug. Waterproof, tough and can be plugged in directly - no need for cable. Button: Longer button push on (0.75sec) prevents accidental activation of your light. Short presses switch modes continuously. Similarly, the light is switched off with a long button push off (0.5sec). Battery storage mode provides the best longevity for your Blinder light. Repeat this procedure every 3 months thereafter if the light isn't being used. Refer to the instructions online. Testing: The Blinder MINI has been tested against the following; Drop tests, corrosion tests, UV tests, Electrical shock and static, vibration and impact, temperature and humidity, cycle testing and CE certification.
Nukeproof Thru Axle Front 15mmThis thru-axle is designed as a direct replacement for the standard thru-axles found in 15mm Rockshox Boost forks as well as most models of 15mm Boost Fox forks. It features a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike (MTB). This makes it a great choice of upgrade for riders who need to replace their damaged or lost stock axle on their forks.The axle has a washer which helps reduce pressure on the fork legs and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness, while preventing the axle from getting stuck when you want to remove it.All axles are a 6mm hex on the non-drive side and have a backup 6mm hex on the drive-side, allowing the axle to be tightened and loosened from either side of the bike.Always apply a small amount of grease to the axle and threads when installing your axle. Please Note: Not compatible with 2021 Fox 36mm / 38mm forks Diameter Axle Length Thread Pitch Thread Length RockShox 15mm Boost 158mm 1.5 10mm Fox 15mm Boost Not compatible with 2021 36mm / 38mm 155mm 1.5 13.5mm Click here for Nukeproof's technical information.Features: Material: AL7075 Aluminium CNC Precision engineered Hollow for weight saving 6mm Hex head at both axle ends for easy fitting & removalBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Thru Axle Front 15mmThis thru-axle is designed as a direct replacement for the standard thru-axles found in 15mm Rockshox Boost forks as well as most models of 15mm Boost Fox forks. It features a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike (MTB). This makes it a great choice of upgrade for riders who need to replace their damaged or lost stock axle on their forks.The axle has a washer which helps reduce pressure on the fork legs and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness, while preventing the axle from getting stuck when you want to remove it.All axles are a 6mm hex on the non-drive side and have a backup 6mm hex on the drive-side, allowing the axle to be tightened and loosened from either side of the bike.Always apply a small amount of grease to the axle and threads when installing your axle. Please Note: Not compatible with 2021 Fox 36mm / 38mm forks Diameter Axle Length Thread Pitch Thread Length RockShox 15mm Boost 158mm 1.5 10mm Fox 15mm Boost Not compatible with 2021 36mm / 38mm 155mm 1.5 13.5mm Click here for Nukeproof's technical information.Features: Material: AL7075 Aluminium CNC Precision engineered Hollow for weight saving 6mm Hex head at both axle ends for easy fitting & removalBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
An outfront mounting system that allows you to get the best view of your cycling computer while not taking up too much of the precious space along your handlebars
The ideal solution if there is no room for a drinking bottle holder on the frame of the bike: This bike bag holds not only tools, a first aid kit and other useful utensils, but also a drink. The bottle is further secured with an elastic band. Features: mesh side pocket for multitool, etc. loop for safety light reflecting prints flexible elasticated holder for drinks bottle Material: 150D PA RIPSTOP PVC free Dimensions (L/W/H) 220/110/180mm