Mudhugger EVO Ziptie Clip-On Front MudguardThe EVO Ziptie Front Mudguard from Mudhugger is a stiff and durable mudguard that's held in place with zip ties. And, it's ideal for use with downhill (DH) and enduro bikes in all weather and trail conditions.Are you ready? The world's fastest mudguard is evolving, the Mudhugger EVO Ziptie, designed with the help of DH World Cup and EWS racers. With the benefit of designing the new Mudhugger EVO around the latest FOX 36 and 38's and Rockshox ZEB to avoid the problem of the crown hitting the mudguard at full compression that other mudguards suffer from but still compatible with all other forks which are Boost (not reverse fork brace forks though). Optimum length, not too short, no longer than needed. Plus, it features a subtle kicker to keep the length as short as possible without compromising spray protection and is strong enough for DH racing at the highest level. Features: Length: 515mm - Rear extension 330mm, front extension 185mm Supplied with 4 zipties to install on your forks More mud clearance No more crown fouling at full compression 100% recycled PP Designed, made and packed in the UK Weight: 120g, without fittingsBuy Mudhugger Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Mudhugger EVO Bolt-On Fixed Front MudguardThe EVO Bolt-On Front Mudguard from Mudhugger is ideal for use with downhill (DH) and enduro suspension forks. This is due to its stiff, durable and stylish construction that keeps the dirt away from you while complimenting your bikes awesome looks.The Mudhugger EVO Bolt-On was designed with the help of DH World Cup and EWS racers. Durable, Stable and Secure Bolt On MudguardMudhugger had the benefit of designing the new Mudhugger EVO around the latest FOX 36 and 38's and Rockshox ZEB to avoid the problem of the crown hitting the mudguard at full compression that other mudguards suffer from (adapter bracket required for ZEB, see options) but still compatible with older (2017) onwards FOX forks 34 and 36 (including Fox/Marzocchi) which have bolt holes. *not compatible with Marzocchi Bomber Z2. Please Note: For all Downhill forks see the options for FOX and Ohlins DH version.Also, compatible with Ohlins RXF and DH forks (adapter bracket required, sold separately).Bolts directly to the back of the fork brace. Supplied with rubber pads, bolts, washers and hex key to install to your forks. Features: Length: 515mm total - Rear extension 330mm, front extension 185mm More mud clearance No more crown fouling at full compression Optimum length, not too short, no longer than needed Subtle kicker to keep length as short as possible without compromising spray protection Strong enough for DH racing at the highest level 100% recycled PP Designed, made and packed in the UK Weight: 125g, without fittingsBuy Mudhugger Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
MudHugger Front Gravel Hugger MudguardThe Front Gravel Hugger is a gravel bike-specific mudguard that protects you from trail debris flicking up, water splashing over you and anything else your tyres may kick up towards you. Wide Gravel Bike MudguardFollowing the tried and tested tyre hugging design of the MTB Mudhuggers, the GravelHugger is designed to fit most fork, wheel and tyre (up to 50mm wide) combos for your gravel bikes. To reduce single-use plastic waste and make fitting and removing easier, the GravelHugger is supplied with nitrile O-rings (70mm sizes for flat blade type and 50mm for traditional round steel forks). Zip ties (sold separately) can be used if you'd prefer to fit the guard and leave on your bike at all times. Features: Designed, made and packed in the UK from 99% recycled polypropylene, which of course can be recycled again Suitable For: 700c and 650b wheels Max tyre width 50mm (depending on wheel/tyre combination) Length: 560mm Width: 55mm Fork Compatibility: Suits all solid 650b and 700c forks Includes O rings for non-permanent installation Weight: 150g (approx)Buy MudHugger Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Mudhugger Front Mudguard ExtenderThis mudguard extender is engineered to be easy to fit and can be removed when not required. It uses plastic pop rivets to attach and no drilling is needed with the Mudhugger FRX or ShortyX. This front extender makes the back of your Hugger 105mm longer. Features: Post fit extenders for the FRX and Shorty Mudhugger Simple to fit and can be removed when not needed Weight approx 16gBuy Mudhugger Bike Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Length 390mm - Rear extension 255mm, front extension 105mm. Width - 90mm Weight 100g, without fittings. Supplied with 4 zipties to install on your forks. We've had the benefit of designing the new Mudhugger EVO around the latest FOX 36 and 38's and Rockshox ZEB to avoid the problem of the crown hitting the mudguard at full compression that other mudguards suffer from but still compatible with all other forks which are Boost. For Manitou Mezza (and similar reverse fork arch forks) you will need to drill 4 small holes to align with the reverse fork brace. More mud clearance. No more crown fouling at full compression. Stiffer. Optimum length, not too short, no longer than needed. Subtle kicker to keep length as short as possible without compromising spray protection. Strong enough for DH racing at the highest level. 100% recycled PP. Designed, made and packed in the UK.
We've had the benefit of designing the new Mudhugger EVO around the latest FOX 36 and 38's and Rockshox ZEB (not compatible with 38mm offset ZEB) and new Domain to avoid the problem of the crown hitting the mudguard at full compression that other mudguards suffer from (adapter bracket required for ZEB, see options) but still compatible with older (2017) onwards FOX forks 34 (not 2022 version or Step Cast though) and 36 (including Fox/Marzocchi) which have bolt holes. *not compatible with Marzocchi Bomber Z2. Minimum fork offset- 44mm Also compatible with Ohlins RXF and DH forks (adapter bracket required) Compatible with RS RECON GOLD & SLIVER 35. Use the angle adjuster shim included in the default fitting kit along with the 6mm bolt (sold separately) see link above. PLEASE NOTE - For all Downhill forks (not compatible with older 650b FOX 40's) see the option for DH. You will still need to order the separate adapter for Ohlins DH forks. Length - 390mm total - Rear extension 255mm, front extension 105mm Weight - 100g, without fittings.
Designed and made in the UK from 100% recycled black polypropylene. Following the tried and tested tyre hugging design of our MTB Mudhuggers the GravelHugger is designed to fit most fork + wheel + tyre combo's for your Gravel Bikes. To reduce single use plastic waste, and make fitting and removing easier, the GravelHugger is supplied with nitrile O-rings (70mm sizes for flat blade type and 50mm for traditional round steel forks). Suitable for 700c (Max tyre width 42mm) and 650b wheels (Max tyre width 50mm) depending on wheel/tyre/fork combination. Zipties (sold separately) can be utilised if you'd prefer to fit and leave on at all times. Helitape supplied to protect inside of forks where the GravelHugger could scratch the paint. Weight: approx 70g (without fittings) - Length 490mm - width 60mm
Post fit extenders for the FRX and Shorty Mudhugger Simple to fit and can be removed when not needed. Weight approx 16g Wheel Size: 26/29 Colour: Black Material: Plastic
Meet the Mucky Nutz MugGuard... our super, snazzy, award-winning mudguard for mountain bikes, made in the UK from 100% recycled plastic.Living in the land of muck, we have the perfect testing ground for designing and developing a high performing muck-muncher and it's fair to say we're pretty chuffed with the result... an award-winning, eco-savvy mudguard aka MugGuard.CompatibilityDesigned to fit 26-29 inch standard and boost suspension forks with tyres up to 3 inch wide.It can also be used as a rear mudguard on some frames but this is not guaranteed, so please get in touch if unsure.Design FeaturesForward lip to catch and minimise spray.,Sharp trailing edge to cut cloggy soil away from the tyre.,Recessed bridge area to increase tyre clearance.,Wide upper arm profile to protect your seals and stanchions.,Six fastenings, to anchor the guard firmly to the fork, so there is no rattling and minimal movement, even in the rockiest conditions.,Multiple fastening slots for increased functionality.,Supplied with re-useable Velcro for easy installation and quick-release.,Gloss underside finish to shed make and make for easy cleaning.,Finished in a stealthy matt black with contrasting gloss features, the MugGuard is a sleek looking piece of kit..MaterialEco! Eco! Eco! (Just in case you haven't got the brief yet) The MugGuard is made from recycled PP, which we've modified to increase performance and durability against the elements, and at the end of its life can be recycled... Reduce, Reuse, Recycle!SizeLength: Short -400mm / Long - 600mm,Width: 85mm,Weight: Short - 75g / Long - 105g.
Tired of your front wheel hurling muck into your facewhilst bombing it down the trail? We’ve got the answer.Lightweight and stealthy, the Muc-Off Ride Guard keepsmud fling at a minimum. Key Features:Guards against mud,Looks awesome ,Made from 100% recycled plastic waste,100% recyclable ,Easy to fit ,Supplied with 4 zip ties ,Made in England.
Tired of your front wheel hurling muck into your face whilst bombing it down the trail Muc-off have got the answer. Lightweight and stealthy, the Muc-Off Ride Front Guard keeps mud fling at a minimum.Guards against mudFits almost all forksLooks awesomeMade from 100% recycled plastic waste100% recyclableEasy to fitSupplied with 4 zip tiesMade in England
Better Boost Adapter KitsDesigned for:Converting compatible DT-Swiss 15x100mm hubs to 15x110mm Boost standardThe new Better Boost Adapter Kits allow you to keep your existing 15x100mm front wheel as you upgrade to a new Boost 15x110mm fork.What makes them better?There are other conversion kits on the market, but ours is the best. One competing kit consists of two loose 5mm axle spacers that are a pain to install and are easily lost during wheel removal. Another provides you with just one endcap and requires that you re-dish your wheel to re-center it in your fork. The Better Boost Adapter Kit consists of two precisely machined end caps and a rotor spacer (and requistite bolts), and it requires NO DISHING.What hubs are compatible?There are currently two Better Boost Adapter Kits available:Better Boost Adapter Kit for DT-Swiss 350 15x100mm 6-bolt front hubsBetter Boost Adapter Kit for DT-Swiss 240s "Fifteen" 15x100 6-bolt front hubsOther compatibility info:Better Boost adapter kits are not compatible with QR or 20mm hubs, nor are they compatible with those featuring a Shimano Centerlock brake mount. Kits are not suitable for use with Rock Shox RS-1. 185mm max rotor size.