Nukeproof Horizon Front MudguardThe Nukeproof HZN mudguard is designed to be used on your forks to help prevent water, mud and grime from spraying on to your face. This mudguard is compatible with boost and non-boost models while also being ideal for use with forks up to 200mm travel. There are two different-height mounting hole points on the side of the guard, so you can tailor its fit on your bike. Plus, the front of the guard features a nose, which sits snug against your fork leg to ensure the most secure fit.Click here to view how to fit your Horizon Mudguard.Features: Prevents water, mud and grime spray Compatible with Boost and Non-boost forks Two mounting heights Includes 4x cable ties for installation Provides a secure fit for maximum protectionBuy Nukeproof Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
This front thru-axle features a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike (MTB). This makes it a great choice of upgrade for riders who need to replace their damaged or lost stock axle on their forks. The axle has a washer which helps reduce pressure on the fork legs and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness, while preventing the axle from getting stuck when you want to remove it. All axles are a 6mm hex on the non-drive side and have a backup 6mm hex on the drive-side, allowing the axle to be tightened and loosened from either side of the bike. Always apply a small amount of grease to the axle and threads when installing your axle. Please note: Not compatible with 2021 Fox 36mm / 38mm forks. Diameter Axle Length Thread Pitch Thread Length RockShox 15mm Boost 158mm 1.5 10mm Fox 15mm Boost Not compatible with 2021 36mm / 38mm 155mm 1.5 13.5mm Click here for Nukeproof’s technical information.
Ready for fast-paced and aggressive trail-riding, this front wheel has gone through extensive testing to meet the demands of both Enduro and DH riders. It features a special blend of alloy material, which produces a hardness similar to 7-series alloy, but with the ductility and yield properties of a 6-series. This gives you the best of both worlds in terms of stiffness, strength and weight. Nukeproof has also ensured this front wheel's rim profile is the same as the rear (sold separately), the only difference is the front has a thinner sidewall for greater weight savings. One final highlight is it comes equipped with J-bend spokes, which means that tensioning and spoke replacement is as simple as possible. Enduro ABEC 5 Bearings After extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this front wheel. These bearings have the “LLU/LLB” seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time to penetrate. LLU seals are similar, only the contact pressure or interference fit is greater to seal better. Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side. This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box and after a couple of rides it will become free. Nukeproof Horizon V2 Hub This MTB front wheel features a revised Nukeproof Horizon V2 hub, which is available for both 15mm & 20mm spacings in both boost & non boost. We also sell end caps for QR separately. What's Included? Wheels come taped with tubeless valve installed so all you need to do is fit your tyre and add sealant. The tubeless valve supplied is the new Nukeproof Horizon valve which is compatible with Nukeproof ARD and other tyre inserts as well as the cap having a core remover built in. Spoke length’s on Nukeproof wheels are the same regardless of spacing, the length changes with wheel size: Wheel Wheel Size Non Drive Side Spoke Length Driveside Spoke Length Front 27.5" 269 270 Front 29" 288 289 Conversion kits and replacement end caps available separately. Please click here to view how to change your hub spacing with end caps.
This front wheel features a Nukeproof Neutron front hub that is available for both 15mm or 20mm spacings in both Boost and non-Boost. Nukeproof also sell end caps for QR (available separately). The 6066 alloy rim has been extensively to ensure it is a rim which is light enough for aggressive trail riding but strong enough for DH. Nukeproof have used J-Bend spokes meaning tensioning and spoke replacement is much simpler than using a straight pull spoke. The wheels come taped with tubeless valve installed so all you need to do is add sealant and your tyre to get a finished tubeless setup. The valve supplied is Nukeproofs Horizon valve which also has a core remover built into the cap. This valve is also compatible with tyre inserts like Nukeproof ARD. Spoke lengths on the front wheels are the same regardless of spacing, the length changes with wheel size: Wheel Wheel Size Non Driveside Spoke Length Driveside Spoke Length Front 27.5" 272 273 Front 29" 291 292 Conversion kits and replacement end caps available separately. Please click here to view how to change your hub spacing with end caps. Full range of spare parts available.
This Nukeproof Bearing Kit is a genuine, high-quality replacement bearing kit, featuring high quality EZO Japanese cartridge bearings for Nukeproof Horizon front hubs.
Compatible with boost and non-boost fork models and is also effective for use with forks up to 200mm travel, it features two different height mounting hole points on the side so you can be sure of the perfect fit. Also, for the greatest performance Nukeproof has optimised the design to have a nose at the front so it sits snug against your fork legs. Click here to view how to fit your Horizon Mudguard.
This replacement Dissent Front Horse Shoe Kit is for use with the 2020-2022 Nukeproof Dissent frame.
This thru-axle is designed as a direct replacement for the standard thru-axles found in 15mm RockShox Boost forks as well as most models of 15mm Boost Fox forks. It features a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike (MTB). This makes it a great choice of upgrade for riders who need to replace their damaged or lost stock axle on their forks.Material: AL7075 AluminiumCNC Precision engineeredHollow for weight saving6mm Hex head at both axle ends for easy fitting & removalColour: BlackSize: 158mm x P1.5 x 10mm (Rockshox Boost), 155mm P1.5 x 13.5mm (Fox Boost)Option: RockShox Boost, Fox BoostThe axle has a washer which helps reduce pressure on the fork legs and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness, while preventing the axle from getting stuck when you want to remove it.All axles are a 6mm hex on the non-drive side and have a backup 6mm hex on the drive-side, allowing the axle to be tightened and loosened from either side of the bike.Always apply a small amount of grease to the axle and threads when installing your axle. Please Note: Not compatible with 2021 Fox 36mm / 38mm forks.
This thru-axle is designed as a direct replacement for the standard thru-axles found in 15mm RockShox Boost forks as well as most models of 15mm Boost Fox forks. It features a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike (MTB). This makes it a great choice of upgrade for riders who need to replace their damaged or lost stock axle on their forks.Material: AL7075 AluminiumCNC Precision engineeredHollow for weight saving6mm Hex head at both axle ends for easy fitting & removalColour: BlackSize: 158mm x P1.5 x 10mm (Rockshox Boost), 155mm P1.5 x 13.5mm (Fox Boost)Option: RockShox Boost, Fox BoostThe axle has a washer which helps reduce pressure on the fork legs and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness, while preventing the axle from getting stuck when you want to remove it.All axles are a 6mm hex on the non-drive side and have a backup 6mm hex on the drive-side, allowing the axle to be tightened and loosened from either side of the bike.Always apply a small amount of grease to the axle and threads when installing your axle. Please Note: Not compatible with 2021 Fox 36mm / 38mm forks.
The Nukeproof Horizon V2 Front Wheel has been completely redesigned from the ground up and delivers fast and smooth-rolling performance across every inch of the mountain.Rim Material: Alloy Nukeproof BlendUse: MTB, All Mountain, Enduro and DHSpacing Options: 15x100mm; 15x110mm; 20x110mm Non Boost and 20x110mm BoostWheel Size: 27.5" or 29" optionsInner Rim Width: 30mmOuter Rim Width: 35mmRim Height: 21.6mmTubeless Ready: Yes, pre-taped and valve suppliedSpoke Count: 32Spoke Type: J-BendDisc Mount: 6-BoltLacing Pattern: 3xBuild: Hand builtSingle or Pair: SingleWeight: 27.5 15mm Boost: 884g; 27.5 20mm Boost: 946g; 29 15mm Boost: 897g (All weights include tape & valve)This MTB front wheel features a revised design, which gives you fast and smooth-rolling performance as you shred the trails. Coming equipped with Nukeproof's extensively trailed and tested alloy blend, its rim construction is specifically made to meet the demands of both enduro and DH riders. Producing a hardness similar to 7-series alloy but with the ductility and yield properties of a 6-series, this front wheel gives you the best of both worlds in terms of strength, stiffness and weight.Nukeproof has ensured this front wheel's rim profile is the same as the rear (sold separately), with the only difference being that the front has a thinner sidewall for greater weight savings. Another benefit is it comes equipped with J-bend spokes, which means that tensioning and spoke replacement is quick and easy.Enduro ABEC 5 Bearings - After extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this front wheel. These bearings have the LLU/LLB seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time to penetrate. LLU seals are similar, only the contact pressure or interference fit is greater to seal better. Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side. This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box and after a couple of rides it will become free.Nukeproof Horizon V2 Hub - This MTB front wheel features a revised Nukeproof Horizon V2 hub, which is available for both 15mm & 20mm spacings in both boost & non boost. We also sell end caps for QR separately.What's Included - Wheels come taped with tubeless valve installed so all you need to do is fit your tyre and add sealant. The tubeless valve supplied is the revised Nukeproof Horizon valve, which is compatible with Nukeproof ARD and other tyre inserts, as well as the cap having a core remover built in. Conversion kits and replacement end caps available separately.
The Nukeproof Neutron V2 Front Wheel has been completely redesigned from the ground up and gives riders incredibly fast and smooth rolling performance on every ride. It features a Nukeproof Neutron front hub that is available for both 15mm or 20mm spacings in both Boost and non-Boost. Nukeproof also sell end caps for QR (available separately).Rim Material: 6066 AlloyUse: MTB, Trail, All Mountain, Enduro and DHWheel Size: 27.5" or 29" options availableSpacing Options: 15x100mm, 15x110mm, 20x110mm Non Boost, 20x110mm BoostSpoke Type: J-BendSpoke Count: 32Lacing Pattern: 3xDisc Mount: 6-boltInner Rim Width: 28mmExternal Rim Width: 32mmRim Height: 18mmTubeless Ready: Yes Pre-taped and valve suppliedBuild: Hand builtThe 6066 alloy rim has been extensively to ensure it is a rim which is light enough for aggressive trail riding but strong enough for DH. Nukeproof have used J-Bend spokes meaning tensioning and spoke replacement is much simpler than using a straight pull spoke. The wheels come taped with tubeless valve installed so all you need to do is add sealant and your tyre to get a finished tubeless setup. The valve supplied is Nukeproof s Horizon valve which also has a core remover built into the cap. This valve is also compatible with tyre inserts like Nukeproof ARD.
NS Bikes Rotary Front 32H Disc MTB HubNS Bikes Rotary Front Cassette 32H MTB Hub Built to keep your front wheel running as efficiently and smoothly as possible, this fabulous Rotary hub from NS Bikes brings high-quality and reliable rolling to the fore. Made from AL6061-T6 aluminium it keeps a low weight and reliable performance on every ride. Coming in a variety of sizes including a Boost version for use with larger wheels and tyres, this efficient and effective hub runs on fully-sealed bearings, meaning low-maintenance and high-performance. Disc brake compatible for use with modern wheel designs, this dependable and durable NS Bikes creation is a brilliant hub to help lead you to the finish lineFeatures:Material: AL6061-T6 body Bearings: Sealed Disc Brake: IS (International Standard / 6-bolts)Buy NS Bikes Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store