Full-length mudguards offer the maximum in protection from standing water keeping both you and your bike clean and dry even in the worst conditions. The LifeLine Wide Mudguard Set features a PET/Aluminium construction with steel wire stays making them lightweight and flexible. The PET/Aluminium construction is also extremely durable and resistant to corrosion and damage from UV light. Plastic scratch guards on the ends of the mudguard blades provide additional protection. Fully adjustable stays ensure a perfect fit, preventing rattles or fouling on any other components. Low profile stay ends reduce the chances of catching your foot when cornering. The LifeLine Wide Mudguard Set is compatible with caliper or disc brakes and comes complete with full installation instructions and all mounting hardware. Please Note: These mudguards are designed to fit bikes with 700c wheels but the metal stays may require cutting with a hacksaw or heavy-duty wire cutters during fitting. The scratched stock option in the dropdown menu has a small mark on the rear mudguard. This is cosmetic only and does not affect the structural integrity of the mudguard.
LifeLine Wide Fixed Mudguard SetIdeal for gravel and adventure bikes that roll on wider tyres, LifeLine's Wide Mudguards are 50mm wide and are suitable for 38-47mm tyres. They feature a PET/aluminium construction that's extremely durable, resistant to corrosion and UV Light damage, while being held in place securely by robust and lightweight steel-wire stays.Low Profile and Durable ConstructionThese mudguards feature plastic scratch guards at the end for added durability and protection throughout use. Plus, their low-profile construction ensures you will not catch your foremost foot on the front guard when cornering. And, these guards are compatible with caliper and disc brakes and are supplied with full installation instructions and all mounting hardware.Please note: These mudguards are designed to fit bikes with 700c wheels but the metal stays may require cutting with a hacksaw or heavy-duty wire cutters during fitting. The scratched stock option in the dropdown menu has a small mark on the rear mudguard. This is cosmetic only and does not affect the structural integrity of the mudguard.Features: Lightweight Flexible Scratch guards provide additional durability UV and corrosion resistant All mounting hardware included Only compatible with frames and forks that feature mudguard mounts Compatible with calliper and disc brakes 50mm Wide (38-47mm tyres)Buy LifeLine Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
LifeLine Wide Fixed Mudguard SetIdeal for gravel and adventure bikes that roll on wider tyres, LifeLine's Wide Mudguards are 50mm wide and are suitable for 38-47mm tyres. They feature a PET/aluminium construction that's extremely durable, resistant to corrosion and UV Light damage, while being held in place securely by robust and lightweight steel-wire stays.Low Profile and Durable ConstructionThese mudguards feature plastic scratch guards at the end for added durability and protection throughout use. Plus, their low-profile construction ensures you will not catch your foremost foot on the front guard when cornering. And, these guards are compatible with caliper and disc brakes and are supplied with full installation instructions and all mounting hardware.Please note: These mudguards are designed to fit bikes with 700c wheels but the metal stays may require cutting with a hacksaw or heavy-duty wire cutters during fitting. The scratched stock option in the dropdown menu has a small mark on the rear mudguard. This is cosmetic only and does not affect the structural integrity of the mudguard.Features: Lightweight Flexible Scratch guards provide additional durability UV and corrosion resistant All mounting hardware included Only compatible with frames and forks that feature mudguard mounts Compatible with calliper and disc brakes 50mm Wide (38-47mm tyres)Buy LifeLine Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
The K-Edge Garmin Edge/Forerunner fixed mount has all of the great features as the adjustable model but instead comes in a fixed design. The mount is ideal for MTB and road bike users who prefer to mount cycle computers directly on to the stem. This great design simply replaces a standard 5mm spacer on the steerer tube and is then locked securely in place by the top compression cap which allows the unit to sit above the stem. The mount is especially useful in fitting the larger Garmin 510, 800 and 810 size computers above an array of stem configurations. The mount is compatible with 1/1/8'' diameter steerer tubes and weights only 21 grams! K-Edge products are proudly CNC machined in the USA and have a lifetime warranty: you break it, we'll replace it.Compatible With Garmin Edge And Forerunner UnitsFixed DesignMounts To The Steerer Tube - Sits On The StemReplaces A Standard 5mm SpacerCompatible With 1-1/8 Diameter Steerer TubesWeight: 21g
Introducing the Aztec Stainless Steel Fixed Centre Lock Disc Rotor is precision laser cut from the highest quality and most durable stainlesss tseel alloys to give you a superb disc rotor. The finned braking pattern provides smooth braking and reduced pad wear and theres a wear out indicator included to keep it safe.Finned braking pattern design brings smooth braking and less pad wearPrecision laser cut from the best quality, most durable stainless steel alloys availableChamferred edge to meet UCI requirementWear out indicator included for safetyCompatible with virtually all brands of hydraulic and mechanical Disc callipersEasy Centre-Lock mounting system
Updated with thin straps designed to allow unrestricted shoulder movement during every reach and pull, and a pretty teardrop-shaped back opening that provides increased side and lower back coverage, the Speedo Women's Allover Fixed Crossback Swimsuit is ideal for sets and drills. The suit is also fully front-lined for comfort and modesty. Made to withstand daily swim sessions, our quick-drying and 100% chlorine-resistant Endurance+ fabric helps colours stay bright for longer too.
Flexible and Durable Mudguard Made from polypropylene, the Proguard Standard Mudguard is excellent in cold weather and can withstand impact due to its innate flexibility and durability. Indent A mudguard tracking close to the tyre can offer great mud and spray protection but often at the cost of mud clogging and slowing the rider down, a mudguard that sits high off the tyre is conversely going to offer less protection so a compromise is needed. Long Front The front has been made longer to improve the protection of the face and eyes when riding at high speed. The turndown at the front deflects the spray downwards without clogging with mud which causes blockages. Snap-off Hole Covers Hole covers have been added to reduce the amount of mud that can get through unused holes. Once you have chosen which holes you want to use for fitting, you just use a screwdriver to push the cover out leaving it clear for the zip tie. The 24 holes allow you to fit the mudguard to every type of conventional fork including Boost forks (except reverse arch), this allows you to customise your fit. Rear Flick The rear flick was designed to simply offer more protection without adding extra length, it prevents more mud and spray from flying up the side of the frame especially when the wheel is turned. Seal Guard RapidRacerProducts' widely acclaimed Seal Guard has made it to the RapidRacerProducts Proguard Standard Mudguard as a means of offering greater protection for your seals from high-velocity mud and spray, the Seal Guard section also provides additional strength and rigidity to the rear reducing flex.
Full length mudguards offer the maximum in protection from standing water keeping both you and your bike clean and dry even in the worst conditions. The LifeLine Narrow Road Mudguard Set features a PET/Aluminium construction with steel wire stays making them lightweight and flexible. The PET/Aluminium construction is also extremely durable and resistant to corrosion and damage from UV light. Plastic scratch guards on the ends of the mudguard blades provide additional protection. Fully adjustable stays ensure a perfect fit, preventing rattles or fouling on any other components. Low profile stay ends reduce the chances of catching your foot when cornering. The LifeLine Narrow Road Mudguard Set is compatible with calliper or disc brakes and comes complete with full installation instructions and all mounting hardware. Please Note: These mudguards are designed to fit with 700c wheels but the metal stays may require cutting with a hacksaw or heavy duty wire cutters during fitting.
LifeLine Narrow Road Fixed Mudguard SetLifeLine's Narrow Road Mudguard Set is flexible and lightweight with all the mounting hardware included. These mudguards are made of PET/aluminium and are quick and very simple to install. They are UV and corrosion resistant, compatible with all calliper and disc brakes, and only compatible with frames and forks that feature mudguard mounts.Features:Material: PET/AluminiumLightweightFlexibleScratch guards provide additional durabilityUV and corrosion resistantQuick and easy to installAll mounting hardware includedOnly compatible with frames and forks that feature mudguard mountsCompatible with calliper and disc brakesBuy LifeLine Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
LifeLine Narrow Road Fixed Mudguard SetLifeLine's Narrow Road Mudguard Set is flexible and lightweight with all the mounting hardware included. These mudguards are made of PET/aluminium and are quick and very simple to install. They are UV and corrosion resistant, compatible with all calliper and disc brakes, and only compatible with frames and forks that feature mudguard mounts.Features:Material: PET/AluminiumLightweightFlexibleScratch guards provide additional durabilityUV and corrosion resistantQuick and easy to installAll mounting hardware includedOnly compatible with frames and forks that feature mudguard mountsCompatible with calliper and disc brakesBuy LifeLine Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Flexible and Durable Mudguard Made from polypropylene, the Proguard Max Mudguard is excellent in cold weather and can withstand impact due to its innate flexibility and durability. Maximum Protection RapidRacerProducts offers the best protection in the world, this version is 68mm longer at the rear. No other mudguard offers more protection. Indent A mudguard tracking close to the tyre can offer great mud and spray protection but often at the cost of mud clogging and slowing the rider down, a mudguard that sits high off the tyre is conversely going to offer less protection so a compromise is needed. Long Front The front has been made longer - 21mm longer - than some available offerings as this is an area that can significantly improve the protection of the face and eyes when riding at high speed. The turn down at the front deflects the spray downwards without clogging with mud which causes blockages. Snap-off Hole Covers Hole covers have been added to reduce the amount of mud that can get through unused holes. Once you have chosen which holes you want to use for fitting, you just use a screw driver to push the cover out leaving it clear for the zip tie. The 24 holes allow you to fit the mudguard to every type of conventional fork including Boost forks (except reverse arch), this allows you to customise your fit. Rear Flick The rear flick was designed to simply offer more protection without adding extra length, it prevents more mud and spray from flying up the side of the frame especially when the wheel is turned. Seal Guard RapidRacerProducts' widely acclaimed Seal Guard has made it to the Proguard Max Mudguard as a means of offering greater protection for your seals from high velocity mud and spray, the Seal Guard section also provides additional strength and rigidity to the rear reducing flex.
3.0mm twin-parallel, stainless-steel stays are light and strong and provide secure support. Stays slide in adjustable brackets for an optimal and easy fit. Secu Clip 'break-away' fittings on front stays offer a secure yet safe union with the fork. Fenders are constructed from PET plastic and carry an aluminium foil insert, making them durable and light. Mud flaps front and rear provide enhanced protection. Pre-assembled for an easy fit. Supplied with everything you need to fit the mudguards, including a full fitting kit, allen key, braze-on bolts and a snap-fit sliding bridge for the rear.