Flexible and Durable Mudguard Made from polypropylene, the Proguard Standard Mudguard is excellent in cold weather and can withstand impact due to its innate flexibility and durability. Indent A mudguard tracking close to the tyre can offer great mud and spray protection but often at the cost of mud clogging and slowing the rider down, a mudguard that sits high off the tyre is conversely going to offer less protection so a compromise is needed. Long Front The front has been made longer to improve the protection of the face and eyes when riding at high speed. The turndown at the front deflects the spray downwards without clogging with mud which causes blockages. Snap-off Hole Covers Hole covers have been added to reduce the amount of mud that can get through unused holes. Once you have chosen which holes you want to use for fitting, you just use a screwdriver to push the cover out leaving it clear for the zip tie. The 24 holes allow you to fit the mudguard to every type of conventional fork including Boost forks (except reverse arch), this allows you to customise your fit. Rear Flick The rear flick was designed to simply offer more protection without adding extra length, it prevents more mud and spray from flying up the side of the frame especially when the wheel is turned. Seal Guard RapidRacerProducts' widely acclaimed Seal Guard has made it to the RapidRacerProducts Proguard Standard Mudguard as a means of offering greater protection for your seals from high-velocity mud and spray, the Seal Guard section also provides additional strength and rigidity to the rear reducing flex.
Full length mudguards offer the maximum in protection from standing water keeping both you and your bike clean and dry even in the worst conditions. The LifeLine Narrow Road Mudguard Set features a PET/Aluminium construction with steel wire stays making them lightweight and flexible. The PET/Aluminium construction is also extremely durable and resistant to corrosion and damage from UV light. Plastic scratch guards on the ends of the mudguard blades provide additional protection. Fully adjustable stays ensure a perfect fit, preventing rattles or fouling on any other components. Low profile stay ends reduce the chances of catching your foot when cornering. The LifeLine Narrow Road Mudguard Set is compatible with calliper or disc brakes and comes complete with full installation instructions and all mounting hardware. Please Note: These mudguards are designed to fit with 700c wheels but the metal stays may require cutting with a hacksaw or heavy duty wire cutters during fitting.
LifeLine Narrow Road Fixed Mudguard SetLifeLine's Narrow Road Mudguard Set is flexible and lightweight with all the mounting hardware included. These mudguards are made of PET/aluminium and are quick and very simple to install. They are UV and corrosion resistant, compatible with all calliper and disc brakes, and only compatible with frames and forks that feature mudguard mounts.Features:Material: PET/AluminiumLightweightFlexibleScratch guards provide additional durabilityUV and corrosion resistantQuick and easy to installAll mounting hardware includedOnly compatible with frames and forks that feature mudguard mountsCompatible with calliper and disc brakesBuy LifeLine Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
LifeLine Narrow Road Fixed Mudguard SetLifeLine's Narrow Road Mudguard Set is flexible and lightweight with all the mounting hardware included. These mudguards are made of PET/aluminium and are quick and very simple to install. They are UV and corrosion resistant, compatible with all calliper and disc brakes, and only compatible with frames and forks that feature mudguard mounts.Features:Material: PET/AluminiumLightweightFlexibleScratch guards provide additional durabilityUV and corrosion resistantQuick and easy to installAll mounting hardware includedOnly compatible with frames and forks that feature mudguard mountsCompatible with calliper and disc brakesBuy LifeLine Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Updated with thin straps designed to allow unrestricted shoulder movement during every reach and pull, and a pretty teardrop-shaped back opening that provides increased side and lower back coverage, the Speedo Women's Allover Fixed Crossback Swimsuit is ideal for sets and drills. The suit is also fully front-lined for comfort and modesty. Made to withstand daily swim sessions, our quick-drying and 100% chlorine-resistant Endurance+ fabric helps colours stay bright for longer too.
Introducing the Aztec Stainless Steel Fixed Centre Lock Disc Rotor is precision laser cut from the highest quality and most durable stainlesss tseel alloys to give you a superb disc rotor. The finned braking pattern provides smooth braking and reduced pad wear and theres a wear out indicator included to keep it safe.Finned braking pattern design brings smooth braking and less pad wearPrecision laser cut from the best quality, most durable stainless steel alloys availableChamferred edge to meet UCI requirementWear out indicator included for safetyCompatible with virtually all brands of hydraulic and mechanical Disc callipersEasy Centre-Lock mounting system
The K-Edge Garmin Edge/Forerunner fixed mount has all of the great features as the adjustable model but instead comes in a fixed design. The mount is ideal for MTB and road bike users who prefer to mount cycle computers directly on to the stem. This great design simply replaces a standard 5mm spacer on the steerer tube and is then locked securely in place by the top compression cap which allows the unit to sit above the stem. The mount is especially useful in fitting the larger Garmin 510, 800 and 810 size computers above an array of stem configurations. The mount is compatible with 1/1/8'' diameter steerer tubes and weights only 21 grams! K-Edge products are proudly CNC machined in the USA and have a lifetime warranty: you break it, we'll replace it.Compatible With Garmin Edge And Forerunner UnitsFixed DesignMounts To The Steerer Tube - Sits On The StemReplaces A Standard 5mm SpacerCompatible With 1-1/8 Diameter Steerer TubesWeight: 21g
Full-length mudguards offer the maximum in protection from standing water keeping both you and your bike clean and dry even in the worst conditions. The LifeLine Wide Mudguard Set features a PET/Aluminium construction with steel wire stays making them lightweight and flexible. The PET/Aluminium construction is also extremely durable and resistant to corrosion and damage from UV light. Plastic scratch guards on the ends of the mudguard blades provide additional protection. Fully adjustable stays ensure a perfect fit, preventing rattles or fouling on any other components. Low profile stay ends reduce the chances of catching your foot when cornering. The LifeLine Wide Mudguard Set is compatible with caliper or disc brakes and comes complete with full installation instructions and all mounting hardware. Please Note: These mudguards are designed to fit bikes with 700c wheels but the metal stays may require cutting with a hacksaw or heavy-duty wire cutters during fitting. The scratched stock option in the dropdown menu has a small mark on the rear mudguard. This is cosmetic only and does not affect the structural integrity of the mudguard.
LifeLine Wide Fixed Mudguard SetIdeal for gravel and adventure bikes that roll on wider tyres, LifeLine's Wide Mudguards are 50mm wide and are suitable for 38-47mm tyres. They feature a PET/aluminium construction that's extremely durable, resistant to corrosion and UV Light damage, while being held in place securely by robust and lightweight steel-wire stays.Low Profile and Durable ConstructionThese mudguards feature plastic scratch guards at the end for added durability and protection throughout use. Plus, their low-profile construction ensures you will not catch your foremost foot on the front guard when cornering. And, these guards are compatible with caliper and disc brakes and are supplied with full installation instructions and all mounting hardware.Please note: These mudguards are designed to fit bikes with 700c wheels but the metal stays may require cutting with a hacksaw or heavy-duty wire cutters during fitting. The scratched stock option in the dropdown menu has a small mark on the rear mudguard. This is cosmetic only and does not affect the structural integrity of the mudguard.Features: Lightweight Flexible Scratch guards provide additional durability UV and corrosion resistant All mounting hardware included Only compatible with frames and forks that feature mudguard mounts Compatible with calliper and disc brakes 50mm Wide (38-47mm tyres)Buy LifeLine Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
LifeLine Wide Fixed Mudguard SetIdeal for gravel and adventure bikes that roll on wider tyres, LifeLine's Wide Mudguards are 50mm wide and are suitable for 38-47mm tyres. They feature a PET/aluminium construction that's extremely durable, resistant to corrosion and UV Light damage, while being held in place securely by robust and lightweight steel-wire stays.Low Profile and Durable ConstructionThese mudguards feature plastic scratch guards at the end for added durability and protection throughout use. Plus, their low-profile construction ensures you will not catch your foremost foot on the front guard when cornering. And, these guards are compatible with caliper and disc brakes and are supplied with full installation instructions and all mounting hardware.Please note: These mudguards are designed to fit bikes with 700c wheels but the metal stays may require cutting with a hacksaw or heavy-duty wire cutters during fitting. The scratched stock option in the dropdown menu has a small mark on the rear mudguard. This is cosmetic only and does not affect the structural integrity of the mudguard.Features: Lightweight Flexible Scratch guards provide additional durability UV and corrosion resistant All mounting hardware included Only compatible with frames and forks that feature mudguard mounts Compatible with calliper and disc brakes 50mm Wide (38-47mm tyres)Buy LifeLine Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
This bolt on front mudguard provides wide coverage, is longer at the front and features a unique flick at the rear to protect you from mud, spray and virtually anything your front wheel throws at you. Its design is specially engineered for efficient performance whether your riding Enduro, Downhill, XC or Trail. This mudguard ensures unmatched protection and its unique polypropylene construction gives a flexible and ultra-durable performance at a low weight. Mudguard Protection from Spray, Dirt and Grit Available in two sizes that are suited to all riding styles and weather and terrain situations, the RRP ProGuard Bolt On Front Mudguard provides protection and style like no other. The Standard offers optimum levels of protection from mud and spray, whereas the Mini provides good protection in a low-profile and more discreet package. Plus, this design features a Seal Shield that keeps dirt away from your fork's seals for increased intervals between servicing and more time on the trails. Compatibility: This direct-mount mudguard is designed for the forks listed below that have the THREADED HOLES in the rear of the fork brace: FOX 32, 34, 36, 49 - Std & Boost (not FOX 40 in 26” or 27.5” without adapter bracket) New Marzocchi forks (using the FOX chassis) Ohlins forks SR Suntour (models with unthreaded straight through the hole in the fork brace require a Sleeve Pack to mount ProGuard BOLT-ON (sold separately)
SKS Commuter Road Fixed Mudguard Set A top-end set of full-length mudguards from German fender producer SKS, their Commuter Road Mudguard set comes fully equipped with everything you need to ensure you and your bike stay clean on your urban or city ride. Strong and Secure Support and Protection Ready-built for easy installation, the 3.0mm stainless steel stays slide in to place on their adjustable brackets for optimal and customisable positioning. The front stays attach with ease to your fork via their innovative Secu-Clip 'break-away' fitting, while the fenders are built from a lightweight PET plastic and include an aluminium foil insert for additional durability in the most inclement of conditions. Coming complete with a full fitting kit containing an Allen wrench, braze-on bolts and a snap-fit sliding bridge for the rear guard, the SKS Commuter Road Mudguard is a high-quality splash prevention bit of kit. Features: Material: Stays - Stainless Steel, Fender - PET Plastic with Aluminium Foil Insert Attachment: Secu-Clip BreakAway Fitting, Adjustable Brackets Weight: 195 g per pair (approx) Buy SKS Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.