With its new design as well as a plethora of useful and innovative new technologies, this small component improves the EPS experience in a big way. Improved integration, facilitated and nofuss charging, improved led diagnostics and wireless technology that allows for increased interaction with the groupset are just a few of the improvements housed in its tiny structure. Enclosed and protected in the Power Unit and interface, ""Digital Tech Intelligence"" transmits, receives and processes data thousands of times a second. An electronic brain which instantaneously synchronises all the functions requested by the rider. With just a simple click of the controls, D.T.I transmits the corresponding signal instantly, accurately and reliably to the rear or front derailleur, for levels of performance and control feel never experienced before with a conventional drivetrain. But as well as all this, the D.T.I. system also monitors the entire drivetrain and each of its components, continuously checking battery level and functionality, and checking that the rear and front derailleur are working correctly. The procedures to reset the rear derailleur and derailleur to zero are essential for the system to function.These procedures allow the system to learn the reference positions of the chain on the sprockets and chainrings, which will be used to calculate the positions that need to be used in all operating conditions. During the resetting to zero phase the movements of the rear derailleur and derailleur occur continuously, and not through set movements as during adjustment, and they depend on the pressure time of levers 2 and 3. The client can adjust the reference position of the rear derailleur and/or derailleur using the adjustment procedure known as Riding Setting. The adjustment of the rear derailleur is designed especially in case you change the wheel for one with a set of sprockets that are positioned differently with respect to the drop out.It is possible to start the procedure for either the rear derailleur or the derailleur from any chainring. Every time either keys 2 or 3 is pressed, the system performs a set displacement of 0.25 mm if you act on the rear derailleur, and approximately 0.1 mm if you act on the derailleur. When you have completed the adjustment phase, the system will correct the established positions of all chainrings based on the new settings. The EPS system is capable of automatically detecting a whole range of malfunctions.If a malfunction is detected, the EPS system turns on an RGB led located on the power unit. Depending on the area where the malfunction has been detected the led takes on different colours, as per the table below. Being that in some situations the cause of the malfunction making the led light up on the power unit may be temporary, a number of operations are recommended to the end user depending on the colour of the light that appears on the PowerUnit."
Clarks Dimple surface pattern grip with raised central area for improved palm support, single light-weight lock ring.
Jagged mountains inspired the unique midsole design of the Columbia Women's Facet 15 Hiking Shoes. Boasting a tough upper, they are constructed with ballistic textile and stitch-free, welded overlays for a smooth, lightweight fit. Optimising your trail performance, the HGS™ heel stabilises your foot's positioning, while the TECHLITE+™ midsole perfectly balances responsive cushioning with stability. The midsole also ensures a comfortable long-lasting feel. Further optimum traction, the Omni-GRIP™ outsole is rugged with a non-marking rubber design.
Beautifully hand crafted in the UK, the Mountain Facets Cycling Inspired Notebooks are high-quality notebooks that make for great gift ideas. The notebook is lined, with a durable exterior, and a secure stretchy-strap closure.
Head tube reamer 1 1/8" (34 mm) complete with reamerCyclus Tools special tool to face 1 1/8" (34 mm) head tubes.The head tube reamer creates coaxially exact plane cup seats on the head tube.max. head tube length: 190mm max. milling depth: 15mm max. wall tube thickness: 4 mmUseFirst remove the conical guide from the spindle.Insert the tool from above into the head tube of the frame. Put the conical guide on the spindle again and apply pressure with the spring.Rotate the tool clockwise. Use cutting oil while working. Continue to rotate clockwise while taking the tool out of the head tube.Repeat the above steps to ream the bottom side of the head tube.TipBefore reaming remove evetually existing chrome plates on the frame to avoid early abrasion of the reamer.After reaming you might need to remove sharp edges with file.After the use clean the reamer and keep it in a safe place.
The highest standards of protection in the lightest full-face helmet of all time. The Linea 01 MIPS full-face MTB helmet from Dainese sets a new benchmark. Offering maximum lightness for limitless pedalling, it is imperceptible to wear and meets the category's highest safety standards. Weighing just 570 grams (size M), the helmet exceeds all international standards, namely CPSC 1203, CE EN1078, ASTM F1952-DH, ASTM 2032-BMX, and AS/NZ 2063.Fidlock fastening, certified in accordance with all international standardsDual-density EPS foam offers enhanced protection while reducing the weight amountAuxetic chin guard cagePolycarbonate outer shellExtreme field of viewAdjustable peakRemoveable and washable inner liningAnti-bacterial and anti-odour inner liningBreakaway auxetic peak30 Air intakes for limitless airflow (22 core + 8 chin guard)Helmet includes 2 liners, 2 sets of cheek pads and 2 neck rolls for a custom fitFidlock magnetic buckle systemFeaturing MIPS Brain Protection System - a helmet integrated, low friction layer designed to reduce rotational motion transferred to the brain from impactsTwiceMe NFC Medical ID systemMaterials: Inner shell: 94% polystyrene. Outer shell: 1% PA66, 2% foam, 1% polyesterGreater protection is provided by the polycarbonate outer shell, combined with a dual density EPS inner shell, mapped according to those areas of the skull that are most subjected and exposed to impacts. Robustness and rigidity are enhanced with an exclusive nylon exoskeleton inspired by the geometry of auxetic materials, which is embedded in the inner shell, starting from the EPS chin guard and extending across the cheek area. Its unmistakable structure allows for a continuous flow of air and helps contain the overall weight.Safety is in every detail. The integrated MIPS system reduces the possibility of dangerous rotational impact forces being transmitted to the head. The helmet is equipped with the NFC TwiceMe system that allows for the faster transmission of personal and health information, allowing for dramatically reduced rescue times.The desired ventilation is provided by 30 air vents: 22 on the central core and 8 rear extractors that guarantee a continuous flow and optimal heat exchange during every phase of activity, from the most extreme descents to the most intense pedalling and climbing. For a level of comfort that allows the rider to focus only on the path, riding without constraints due to the soft, anti-bacterial and anti-odour thermoformed lining.Visibility is perfect on any route and in all conditions due to the wide field of vision, a chin guard design that improves the line of vision even in more technical sections, and the solid yet flexible, tilt-adjustable peak, which can be operated with one hand and with gloves on. The form of the shell is designed to accommodate goggles when not being worn and is perfectly compatible with models in the Dainese MTB Goggles Line. Fast and secure fastening is ensured by the Fidlock magnetic system, which can also be operated while wearing gloves.Homologation: CPSC 1203, CE EN1078, ASTM F1952-DH, ASTM 2032-BMX, AS/NZ 2063
The highest standards of protection in the lightest full-face helmet of all time. The Linea 01 MIPS full-face MTB helmet from Dainese sets a new benchmark. Offering maximum lightness for limitless pedalling, it is imperceptible to wear and meets the category's highest safety standards. Weighing just 570 grams (size M), the helmet exceeds all international standards, namely CPSC 1203, CE EN1078, ASTM F1952-DH, ASTM 2032-BMX, and AS/NZ 2063.Fidlock fastening, certified in accordance with all international standardsDual-density EPS foam offers enhanced protection while reducing the weight amountAuxetic chin guard cagePolycarbonate outer shellExtreme field of viewAdjustable peakRemoveable and washable inner liningAnti-bacterial and anti-odour inner liningBreakaway auxetic peak30 Air intakes for limitless airflow (22 core + 8 chin guard)Helmet includes 2 liners, 2 sets of cheek pads and 2 neck rolls for a custom fitFidlock magnetic buckle systemFeaturing MIPS Brain Protection System - a helmet integrated, low friction layer designed to reduce rotational motion transferred to the brain from impactsTwiceMe NFC Medical ID systemMaterials: Inner shell: 94% polystyrene. Outer shell: 1% PA66, 2% foam, 1% polyesterGreater protection is provided by the polycarbonate outer shell, combined with a dual density EPS inner shell, mapped according to those areas of the skull that are most subjected and exposed to impacts. Robustness and rigidity are enhanced with an exclusive nylon exoskeleton inspired by the geometry of auxetic materials, which is embedded in the inner shell, starting from the EPS chin guard and extending across the cheek area. Its unmistakable structure allows for a continuous flow of air and helps contain the overall weight.Safety is in every detail. The integrated MIPS system reduces the possibility of dangerous rotational impact forces being transmitted to the head. The helmet is equipped with the NFC TwiceMe system that allows for the faster transmission of personal and health information, allowing for dramatically reduced rescue times.The desired ventilation is provided by 30 air vents: 22 on the central core and 8 rear extractors that guarantee a continuous flow and optimal heat exchange during every phase of activity, from the most extreme descents to the most intense pedalling and climbing. For a level of comfort that allows the rider to focus only on the path, riding without constraints due to the soft, anti-bacterial and anti-odour thermoformed lining.Visibility is perfect on any route and in all conditions due to the wide field of vision, a chin guard design that improves the line of vision even in more technical sections, and the solid yet flexible, tilt-adjustable peak, which can be operated with one hand and with gloves on. The form of the shell is designed to accommodate goggles when not being worn and is perfectly compatible with models in the Dainese MTB Goggles Line. Fast and secure fastening is ensured by the Fidlock magnetic system, which can also be operated while wearing gloves.Homologation: CPSC 1203, CE EN1078, ASTM F1952-DH, ASTM 2032-BMX, AS/NZ 2063
The Linea 01 MIPS Full Face MTB Helmet makes use of a dual-density EPS inner, with a mapped design to provide targetted protection to those areas most susceptible to crash impacts. Meanwhile, the tough polycarbonate outer shell offers long-term durability and protection against lighter impacts - think branches and bushes along the trail. Structural strength and rigidity are enhanced by a nylon exoskeleton embedded within the inner shell. This starts across the chainguard and across the cheeks. This keeps weight low without sacrificing protection. MIPS (Multi-directional Impact Protection System) The Mips system is designed to provide added safety for helmets in many accidents. For certain impacts, the Mips system can reduce harmful rotational motion that might otherwise be transferred to the user’s head. Rotational motion is a common cause of concussions in oblique hits to the head. In a crash, the Mips system is designed to move slightly inside the helmet to help redirect forces away from the head. Shop All MIPS Helmets Click Here NFC (Near Field Communication) Medical ID Device Included with the helmet is another layer of safety via an NFC TwiceMe system. Should you become incapacitated after a crash, this device gives first responders access to faster personal and health information transmission, allowing for dramatically reduced rescue times. Go with the Flow While you're mountain biking, you'll be generating some heat. But thanks to 29 carefully positioned vents, the Linea optimises airflow, ensuring you don't overheat. An anti-bacterial and anti-odour liner also makes for a fresh ride, every time. And when you need that new helmet feel, it's removable and washable too. Ride Ready Dianese have designed the Linea so that your vision of the trails remains clear and unrestricted. The chin guard is engineered not to get in your line of sight and the adjustable peak is easily adjusted with one hand so as to allow the perfect field of view. Fast and secure fastening is ensured by the Fidlock® magnetic system, which can also be operated while wearing gloves.
Dainese Linea 01 MIPS Full Face MTB HelmetWith a low weight but excellent protection from MIPS and safety features packed inside, including a Medical ID device, the Dainese Linea 01 MIPS Full Face MTB Helmet is ready for the demands of downhill mountain biking.The Linea 01 MIPS Full Face MTB Helmet makes use of a dual-density EPS inner, with a mapped design to provide targetted protection to those areas most susceptible to crash impacts. Meanwhile, the tough polycarbonate outer shell offers long-term durability and protection against lighter impacts - think branches and bushes along the trail. Structural strength and rigidity are enhanced by a nylon exoskeleton embedded within the inner shell. This starts across the chainguard and across the cheeks. This keeps weight low without sacrificing protection.MIPS (Multi-directional Impact Protection System) The Mips system is designed to provide added safety for helmets in many accidents. For certain impacts, the Mips system can reduce harmful rotational motion that might otherwise be transferred to the user’s head.Rotational motion is a common cause of concussions in oblique hits to the head. In a crash, the Mips system is designed to move slightly inside the helmet to help redirect forces away from the head.NFC (Near Field Communication) Medical ID DeviceIncluded with the helmet is another layer of safety via an NFC TwiceMe system. Should you become incapacitated after a crash, this device gives first responders access to faster personal and health information transmission, allowing for dramatically reduced rescue times.Go with the FlowWhile you're mountain biking, you'll be generating some heat. But thanks to 29 carefully positioned vents, the Linea optimises airflow, ensuring you don't overheat. An anti-bacterial and anti-odour liner also makes for a fresh ride, every time. And when you need that new helmet feel, it's removable and washable too.Ride ReadyDianese have designed the Linea so that your vision of the trails remains clear and unrestricted. The chinguard is engineered not to get in your line of sight and the adjustable peak is easily adjusted with one hand so as to allow the perfect field of view. Fast and secure fastening is ensured by the Fidlock® magnetic system, which can also be operated while wearing gloves.Features:Dual-density EPS foam offers enhanced protection while reducing the weight amount - Polycarbonate Outer Shell29 Air Intakes for limitless airflowAdjustable Peak and Auxetic chinguard cageRemovable and washable anti-bacterial and anti-odour inner liningFidlock® magnetic buckle systemHelmet includes 1 extra liner, 2 extra sets of cheek pads and 1 extra neck roll for a custom fitMIPS Brain Protection SystemNFC (Near Field Communication) Medical ID device includedCE EN1078 - Weight: 570 grams (size M)Shop all MIPS helmets - Click hereBuy Dainese Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.
Dainese Linea 01 MIPS Full Face MTB HelmetWith a low weight but excellent protection from MIPS and safety features packed inside, including a Medical ID device, the Dainese Linea 01 MIPS Full Face MTB Helmet is ready for the demands of downhill mountain biking.The Linea 01 MIPS Full Face MTB Helmet makes use of a dual-density EPS inner, with a mapped design to provide targetted protection to those areas most susceptible to crash impacts. Meanwhile, the tough polycarbonate outer shell offers long-term durability and protection against lighter impacts - think branches and bushes along the trail. Structural strength and rigidity are enhanced by a nylon exoskeleton embedded within the inner shell. This starts across the chainguard and across the cheeks. This keeps weight low without sacrificing protection.MIPS (Multi-directional Impact Protection System) The Mips system is designed to provide added safety for helmets in many accidents. For certain impacts, the Mips system can reduce harmful rotational motion that might otherwise be transferred to the user’s head.Rotational motion is a common cause of concussions in oblique hits to the head. In a crash, the Mips system is designed to move slightly inside the helmet to help redirect forces away from the head.NFC (Near Field Communication) Medical ID DeviceIncluded with the helmet is another layer of safety via an NFC TwiceMe system. Should you become incapacitated after a crash, this device gives first responders access to faster personal and health information transmission, allowing for dramatically reduced rescue times.Go with the FlowWhile you're mountain biking, you'll be generating some heat. But thanks to 29 carefully positioned vents, the Linea optimises airflow, ensuring you don't overheat. An anti-bacterial and anti-odour liner also makes for a fresh ride, every time. And when you need that new helmet feel, it's removable and washable too.Ride ReadyDianese have designed the Linea so that your vision of the trails remains clear and unrestricted. The chinguard is engineered not to get in your line of sight and the adjustable peak is easily adjusted with one hand so as to allow the perfect field of view. Fast and secure fastening is ensured by the Fidlock® magnetic system, which can also be operated while wearing gloves.Features:Dual-density EPS foam offers enhanced protection while reducing the weight amount - Polycarbonate Outer Shell29 Air Intakes for limitless airflowAdjustable Peak and Auxetic chinguard cageRemovable and washable anti-bacterial and anti-odour inner liningFidlock® magnetic buckle systemHelmet includes 1 extra liner, 2 extra sets of cheek pads and 1 extra neck roll for a custom fitMIPS Brain Protection SystemNFC (Near Field Communication) Medical ID device includedCE EN1078 - Weight: 570 grams (size M)Shop all MIPS helmets - Click hereBuy Dainese Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.
Dainese Linea 01 MIPS Full Face MTB HelmetWith a low weight but excellent protection from MIPS and safety features packed inside, including a Medical ID device, the Dainese Linea 01 MIPS Full Face MTB Helmet is ready for the demands of downhill mountain biking.The Linea 01 MIPS Full Face MTB Helmet makes use of a dual-density EPS inner, with a mapped design to provide targetted protection to those areas most susceptible to crash impacts. Meanwhile, the tough polycarbonate outer shell offers long-term durability and protection against lighter impacts - think branches and bushes along the trail. Structural strength and rigidity are enhanced by a nylon exoskeleton embedded within the inner shell. This starts across the chainguard and across the cheeks. This keeps weight low without sacrificing protection.MIPS (Multi-directional Impact Protection System) The Mips system is designed to provide added safety for helmets in many accidents. For certain impacts, the Mips system can reduce harmful rotational motion that might otherwise be transferred to the user’s head.Rotational motion is a common cause of concussions in oblique hits to the head. In a crash, the Mips system is designed to move slightly inside the helmet to help redirect forces away from the head.NFC (Near Field Communication) Medical ID DeviceIncluded with the helmet is another layer of safety via an NFC TwiceMe system. Should you become incapacitated after a crash, this device gives first responders access to faster personal and health information transmission, allowing for dramatically reduced rescue times.Go with the FlowWhile you're mountain biking, you'll be generating some heat. But thanks to 29 carefully positioned vents, the Linea optimises airflow, ensuring you don't overheat. An anti-bacterial and anti-odour liner also makes for a fresh ride, every time. And when you need that new helmet feel, it's removable and washable too.Ride ReadyDianese have designed the Linea so that your vision of the trails remains clear and unrestricted. The chinguard is engineered not to get in your line of sight and the adjustable peak is easily adjusted with one hand so as to allow the perfect field of view. Fast and secure fastening is ensured by the Fidlock® magnetic system, which can also be operated while wearing gloves.Features:Dual-density EPS foam offers enhanced protection while reducing the weight amount - Polycarbonate Outer Shell29 Air Intakes for limitless airflowAdjustable Peak and Auxetic chinguard cageRemovable and washable anti-bacterial and anti-odour inner liningFidlock® magnetic buckle systemHelmet includes 1 extra liner, 2 extra sets of cheek pads and 1 extra neck roll for a custom fitMIPS Brain Protection SystemNFC (Near Field Communication) Medical ID device includedCE EN1078 - Weight: 570 grams (size M)Shop all MIPS helmets - Click hereBuy Dainese Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.