When fitting cleats to your shoes its crucial that they are set in the right position as they play a big part in your riding performance. As the main point of energy transfer its critical that they are set up correctly because if they are not power and performance will be lost as well as riding comfort being compromised which could result in injury for the rider.Most riders when fitting new cleats will spend time measuring and fine-tuning to get the cleats directly under the balls of the feet, and then go on a test ride, fine-tune, and pedal some more to find the optimum angle for the cleats, which can all add up to a lot of time. Even when you think you have the cleat in the correct position, a lot of the time it is in fact not set up correctly although this is hard to notice and is sometimes only spotted by someone who is watching your pedal motion. Luckily thanks to Ergon, fitting new cleats is now simple, precise and quick. The TP1 pedal cleat tool allows for the accurate adjustment of the three axis which are the most important when installing cleats. Fore/aft adjustment, adjusting the Q-Factor and adjusting the cleat angle. Available for a range of pedals including SPD, SPD-SL, KEO, Crank Bros and Speedplay you can be guaranteed that once you have used the TP1 pedal cleat tool you will be pedaling as efficiently as possible.
When fitting cleats to your shoes its crucial that they are set in the right position as they play a big part in your riding performance. As the main point of energy transfer its critical that they are set up correctly because if they are not power and performance will be lost as well as riding comfort being compromised which could result in injury for the rider.Most riders when fitting new cleats will spend time measuring and fine-tuning to get the cleats directly under the balls of the feet, and then go on a test ride, fine-tune, and pedal some more to find the optimum angle for the cleats, which can all add up to a lot of time. Even when you think you have the cleat in the correct position, a lot of the time it is in fact not set up correctly although this is hard to notice and is sometimes only spotted by someone who is watching your pedal motion. Luckily thanks to Ergon, fitting new cleats is now simple, precise and quick. The TP1 pedal cleat tool allows for the accurate adjustment of the three axis which are the most important when installing cleats. Fore/aft adjustment, adjusting the Q-Factor and adjusting the cleat angle. Available for a range of pedals including SPD, SPD-SL, KEO, Crank Bros and Speedplay you can be guaranteed that once you have used the TP1 pedal cleat tool you will be pedaling as efficiently as possible.
Ergon GD1 Evo Factory GripsThese versatile bar grips feature more damping, control, a super-soft thumb zone as well as an inner stop design, so you can take on all the challenges that come with downhill (DH), enduro and gravity mountain bike riding. After working together with top professionals like Rémy Métailler and Vali Höll, Ergon evolved its renowned GD1 grips even further by offering greater comfort and control in demanding terrain conditions. In addition, this factory version features a unique rubber compound exclusively made in Germany for an even more precise grip feel. The GD1 Evo is twist-proof on carbon handlebars and available in two diameters.Factory Custom RubberCycling grips are repeatedly subject to mechanical wear and abrasion - particularly in an environment as tough as mountain biking. Ergon's exclusive, Factory Custom Rubber compound maintains its high grip properties and precise structure much longer than other compounds.Conical Grip DesignThe GD1 EVO Factory has a conical, tapered shape. The grip diameter gradually increases towards the end of the grip. This increases the damping properties towards the end of the grip while the inboard diameter stays slim and responsive. The result is that you get the combined advantages of great comfort and total control on demanding trails.Features: Grip Material: Factory Custom Rubber Clamp Material: Cold Forged Aluminium, CNC-Machined Use: Mountain Bike (MTB), Downhill (DH), Enduro and Gravity Size: Slim: For S/M glove sizes (6.5 - 8.5); Regular: For L/XL glove sizes (8.5 - 10.5) Single or Pair: Pair End Plugs Included: YesTechnologies: Available in Two Sizes: The GD1 Evo is available in two diameters, standard and slim. Standard is recommended for glove sizes Large / X-Large (8.5 - 10.5) or for riders who want increased cushioning. The Slim version is suitable for glove sizes Small / Medium (6.5 - 8.5) or riders who prefer grips with a smaller grip range. Minimum Effort - Maximum Grip: The anti-slip tread pattern along with the new super soft thumb zone provides maximum grip. Additionally, the slim redesigned inner stop improves the ability to quickly position the hand and ensures full access of the shift levers. The overall design requires maximum control with less gripping force. Grip Rubber Made in Germany: The material used in Ergon grips meets the highest quality purity standards, is TÜV-certified, durable and absolutely unique in the world of cycling grips. The silicone-based, UV-resistant rubber compound of the GD1 EVO Factory is developed and manufactured exclusively for Ergon in Germany. Ergonomics, product design and engineering - all made in Germany. Internal Clamp: The internal aluminum clamp of the GD series leaves ample space for controls as well as supports a wide gripping position. The strength of this clamping system prevents any twisting of the grip, even on carbon bars. Replaceable End Plugs: The GD1's end plugs are replaceable -a useful detail for adding even more longevity to your grips.Manufacturer's Part Numbers: EG-42440103 Frozen Orange Regular Regular EG-42440017 Frozen Stealth Narrow Slim EG-42440105 Frozen Orange Narrow Slim EG-42440012 Frozen Stealth Regular Regular EG-42440203 Frozen Moss/Oil-Slick Regular Regular EG-42440205 Frozen Moss/Oil-Slick Narrow SlimBuy Ergon Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Ergon GA2 GripsDesigned with excellent ergonomics and an ultra-tactile feel, these Ergin GA2 Grips keep your hands and grip comfortable and painless over the most demanding of runs. Shaping to the contours of your hands on the exterior, the inside of the grip has a tapered inner core which protects further by dampening vibrations and bumps, letting you keep full control of your handlebars without worrying about blisters or unnecessary arm pump. Features: Lightweight composite inboard clamps 100% twist resistant Carbon bar friendly Lightweight composite inboard clamps Weight: 170g per pair Buy Ergon Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
When fitting cleats to your shoes its crucial that they are set in the right position as they play a big part in your riding performance. As the main point of energy transfer its critical that they are set up correctly because if they are not power and performance will be lost as well as riding comfort being compromised which could result in injury for the rider.Most riders when fitting new cleats will spend time measuring and fine-tuning to get the cleats directly under the balls of the feet, and then go on a test ride, fine-tune, and pedal some more to find the optimum angle for the cleats, which can all add up to a lot of time. Even when you think you have the cleat in the correct position, a lot of the time it is in fact not set up correctly although this is hard to notice and is sometimes only spotted by someone who is watching your pedal motion. Luckily thanks to Ergon, fitting new cleats is now simple, precise and quick. The TP1 pedal cleat tool allows for the accurate adjustment of the three axis which are the most important when installing cleats. Fore/aft adjustment, adjusting the Q-Factor and adjusting the cleat angle. Available for a range of pedals including SPD, SPD-SL, KEO, Crank Bros and Speedplay you can be guaranteed that once you have used the TP1 pedal cleat tool you will be pedaling as efficiently as possible.
The Ergon GA2 Fat is a thicker, chunkier version of the GA2. The ergonomic optimised form, allows reduced force while gripping, because the grip zones are matched to the hand. The inner construction varies in thickness allowing greater damping.Carbon friendly CNC Aluminium clampsReplaceable bar end plugsMaterial: Gravity Control RubberSize: one sizeDiameter: 33mmThe GA2 Fat is an All-Mountain grip with a superb tactile feel thanks to the super soft, UV-stable rubber compound, exclusively developed and manufactured in Germany for Ergon. This allows greater control even on demanding trails. The ergonomic shape fits the contours of the hand and significantly reduces arm pump on long trails. The inner construction varies in thickness allowing greater damping. The inboard clamp allows even more gripping area at the end of the bars, it is completely secure and carbon bar friendly, with replaceable end plugs.
After the successful launch of the GD1 Factory in 2017 and multiple podiums, Ergon have launched the updated GD1 Evo using GravityControl Rubber. It features excellent damping properties, CNC clamps for a secure fit and interchangeable bar end plugs.Thumb Zone Ultra soft damping texture for the thumb areaFingertip Zone Maximum grip for the fingertipsLower Palm Zone (Top) Precise damping properties in the lower palm zone2 grip diameters: Standard for glove size Large/X-Large (8.5-10.5) & Slim for glove sizes Small/Medium (6.5-8.5)Carbon friendly CNC Aluminium clampsInterchangeable end plugs140g per pair (Standard)125g per pair (Slim)Sizing Information:In order to help you maintain perfect control over your bike, your hands should not completely envelop the grip, which is why Ergon offers many grips in two size diameters Small and Large.The difference refers to the grip width (hand size), meaning a larger hand will have a more positive fit on a thicker grip, while a smaller hand is better fit to a smaller grip. For hand/glove sizes 6.5 to 8.5" we recommend Small, for 8.5 to 10.5" Large usually is better. To measure your hand/glove size you need to measure around the largest part of the hand over the knuckle while making a fist, excluding the thumb.
The GA2 Grips also have an ergonomic shape to fit the contours of the hand, which enables you to enjoy increased hand comfort and reduced arm pump when riding long and demanding trails. In addition to this, they have a tapered inner core that dampens sudden shocks and unwanted feedback.
Ergon GA2 GripsDesigned with excellent ergonomics and an ultra-tactile feel, these Ergin GA2 Grips keep your hands and grip comfortable and painless over the most demanding of runs. Shaping to the contours of your hands on the exterior, the inside of the grip has a tapered inner core which protects further by dampening vibrations and bumps, letting you keep full control of your handlebars without worrying about blisters or unnecessary arm pump. Features: Lightweight composite inboard clamps 100% twist resistant Carbon bar friendly Lightweight composite inboard clamps Weight: 170g per pair Buy Ergon Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Ergon GA2 Fat Mountain Bike GripsBased on Ergon’s top-selling GA2 model but with a larger 33mm diameter, the GA2 Fat Mountain Bike (MTB) Grips bring you a higher level of protection from trail feedback and sudden shocks. Made with Ergon’s soft and durable rubber compound, they are the ideal choice for riders with larger hand sizes, enabling you to relax your grip on the bars, reducing hand and arm fatigue on long descents. Ergonomically shaped, they fit snugly in the hand for day-long comfort.Features:Material: German-made soft and durable UV-Resistant RubberClamps: Carbon Fibre-friendly CNC Machined Aluminium, black anodisedUse: Cross-Country (XC), Freeride (FR), All Mountain (AM)Diameter: 33mmSingle or Pair: PairIdeal for riders with larger hand sizesInternal clamps provide increased space for handsGrips provide nerve relief as hands are in a more relaxed positionTapered inner wall thickness increases the vibration dampening effectReplaceable bar end plugsWeight: 135g (pair)Buy Ergon Components from Chain Reaction Cycles from Chain Reaction Cycles, the World's Largest Online Bike Store.
The GA2 Fat is a thicker, chunkier version ofthe GA2. Ideal for riders with larger hands or high demands for damping. The GA2 Fat is an All-Mountain grip with a superb tactile feel thanks to the super soft, UV-stable rubber compound, exclusively developed and manufactured in Germany for Ergon. This allows for greater control on demanding trails.The ergonomic shape fits the contours of the hand and significantly reduced arm pump on long trails. The inner construction varies in thickness allowing greater damping.Key Features:Carbon friendly CNC Aluminium clamps,Replaceable bar end plugs,135g per pair.
After the successful launch of the GD1 Factory in 2017 and multiple podiums, Ergon have launched the updated GD1 Evo using GravityControl Rubber.Thumb Zone Ultra soft damping texture for the thumb areaFingertip Zone Maximum grip for the fingertipsLower Palm Zone (Top) Precise damping properties in the lower palm zone2 grip diameters: Standard for glove size Large/X-Large (8.5-10.5) & Slim for glove sizes Small/Medium (6.5-8.5)Carbon friendly CNC Aluminium clampsInterchangeable end plugs140g per pair (Standard)125g per pair (Slim)Sizing Information:In order to help you maintain perfect control over your bike, your hands should not completely envelop the grip, which is why Ergon offers many grips in two size diameters Small and Large.The difference refers to the grip width (hand size), meaning a larger hand will have a more positive fit on a thicker grip, while a smaller hand is better fit to a smaller grip. For hand/glove sizes 6.5 to 8.5" we recommend Small, for 8.5 to 10.5" Large usually is better. To measure your hand/glove size you need to measure around the largest part of the hand over the knuckle while making a fist, excluding the thumb.