The same ergonomic grip as the GE1 Evo factory, but using Ergon’s entry-level GravityControl Rubber compound. Features: 2 grip diameters: Standard for glove size Large/X-Large (8.5-10.5) & Slim for glove sizes Small/Medium (6.5-8.5) Carbon friendly CNC Aluminium clamps Intergrated end plugs 105g per pair (Standard) 90g per pair (Slim)
Ergon GA2 GripsDesigned with excellent ergonomics and an ultra-tactile feel, these Ergin GA2 Grips keep your hands and grip comfortable and painless over the most demanding of runs. Shaping to the contours of your hands on the exterior, the inside of the grip has a tapered inner core which protects further by dampening vibrations and bumps, letting you keep full control of your handlebars without worrying about blisters or unnecessary arm pump. Features: Lightweight composite inboard clamps 100% twist resistant Carbon bar friendly Lightweight composite inboard clamps Weight: 170g per pair Buy Ergon Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Ergon TP1 Pedal Cleat ToolAccurately install your cleats on cycling shoes, with the Pedal Cleat Tool from Ergon. Exceptionally precise, this installation tool ensures your cleats are installed correctly for enhanced pedalling power to take your cycling to the next level.Correctly installed cleats are noticeable from the first ride. The Ergon TP1 allows the accurate adjustment of the three axis which are important when installing cleats. The fore/aft position, the stance (Q-Factor) and the foot angle. It is simple, fast and effective.The tool is completed by a small handbook. This is a guide to basic ergonomics of the foot and leg, the biomechanic consequences and a simple step by step manual for using the TP1. For expert users' information is provided about maximising performance.Features:Material: PolypropyleneContent: TP1 Pedal Cleat Tool, Handbook and Reference StickersBuy Ergon Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The new gravity-focused grip series GFR1 Factory has been developed and tailored according to the expectations and wishes of Tahnée Seagrave (UK) and her colleague team riders of the Canyon FMD Racing. The Ergon development team always works very closely with athletes and teams, which enables them to design products for the highest demands within their target group and to be used at the very limit. The grip has a slim overall shape for maximum feedback, yet still provides an extremely high level of damping through the ribbed section under the palm. The lower grip zone (finger) is strongly pronounced to keep gripping forces at a minimum when lifting the front wheel. The slim inner stop further assists in finding the right-hand position while still providing free shifter access. The high-strength alloy clamps on the inside keeps the grip from twisting even on carbon bars. The Factory version provides incredible grip and rebound properties. The grip feeling is soft but still super defined and precise.
The best of both worlds. The GA3 combines the relief benefits and wrist support of ergonomic wing grips like the GP1 with the freedom of movement found in rounder MTB grips like GA2.Carbon friendly CNC Aluminium clampsReplaceable bar end plugsEnsures the correct hand position to prevent aches and painsHelps to reduce arm pumpSize; Large or SmallThe ergonomic shape fits the contours of the hand and significantly reduced arm pump on long trails whilst the wing provides support to ensure the correct hand position preventing aches and pains. Based on the well-known GA2 Grips, the GA3 was developed with mini wings. As a perfect extension of the GA grip series, the GA3 offers even more comfort on the trail, but also works perfectly on fitness or sporty urban bikes.Sizing Information:In order to help you maintain perfect control over your bike, your hands should not completely envelop the grip, which is why Ergon offers many grips in two size diameters Small and Large.The difference refers to the grip width (hand size), meaning a larger hand will have a more positive fit on a thicker grip, while a smaller hand is better fit to a smaller grip. For hand/glove sizes 6.5 to 8.5" we recommend Small, for 8.5 to 10.5" Large usually is better. To measure your hand/glove size you need to measure around the largest part of the hand over the knuckle while making a fist, excluding the thumb.
The best of both worlds. The GA3 combines the relief benefits and wrist support of ergonomic wing grips like the GP1 with the freedom of movement found in rounder MTB grips like GA2.Carbon friendly CNC Aluminium clampsReplaceable bar end plugsEnsures the correct hand position to prevent aches and painsHelps to reduce arm pumpSize; Large or SmallThe ergonomic shape fits the contours of the hand and significantly reduced arm pump on long trails whilst the wing provides support to ensure the correct hand position preventing aches and pains. Based on the well-known GA2 Grips, the GA3 was developed with mini wings. As a perfect extension of the GA grip series, the GA3 offers even more comfort on the trail, but also works perfectly on fitness or sporty urban bikes.Sizing Information:In order to help you maintain perfect control over your bike, your hands should not completely envelop the grip, which is why Ergon offers many grips in two size diameters Small and Large.The difference refers to the grip width (hand size), meaning a larger hand will have a more positive fit on a thicker grip, while a smaller hand is better fit to a smaller grip. For hand/glove sizes 6.5 to 8.5" we recommend Small, for 8.5 to 10.5" Large usually is better. To measure your hand/glove size you need to measure around the largest part of the hand over the knuckle while making a fist, excluding the thumb.
The best of both worlds. The GA3 combines the relief benefits and wrist support of ergonomic wing grips like the GP1 with the freedom of movement found in rounder MTB grips like GA2.Carbon friendly CNC Aluminium clampsReplaceable bar end plugsEnsures the correct hand position to prevent aches and painsHelps to reduce arm pumpSize; Large or SmallThe ergonomic shape fits the contours of the hand and significantly reduced arm pump on long trails whilst the wing provides support to ensure the correct hand position preventing aches and pains. Based on the well-known GA2 Grips, the GA3 was developed with mini wings. As a perfect extension of the GA grip series, the GA3 offers even more comfort on the trail, but also works perfectly on fitness or sporty urban bikes.Sizing Information:In order to help you maintain perfect control over your bike, your hands should not completely envelop the grip, which is why Ergon offers many grips in two size diameters Small and Large.The difference refers to the grip width (hand size), meaning a larger hand will have a more positive fit on a thicker grip, while a smaller hand is better fit to a smaller grip. For hand/glove sizes 6.5 to 8.5" we recommend Small, for 8.5 to 10.5" Large usually is better. To measure your hand/glove size you need to measure around the largest part of the hand over the knuckle while making a fist, excluding the thumb.
The best of both worlds. The GA3 combines the relief benefits and wrist support of ergonomic wing grips like the GP1 with the freedom of movement found in rounder MTB grips like GA2.Carbon friendly CNC Aluminium clampsReplaceable bar end plugsEnsures the correct hand position to prevent aches and painsHelps to reduce arm pumpSize; Large or SmallThe ergonomic shape fits the contours of the hand and significantly reduced arm pump on long trails whilst the wing provides support to ensure the correct hand position preventing aches and pains. Based on the well-known GA2 Grips, the GA3 was developed with mini wings. As a perfect extension of the GA grip series, the GA3 offers even more comfort on the trail, but also works perfectly on fitness or sporty urban bikes.Sizing Information:In order to help you maintain perfect control over your bike, your hands should not completely envelop the grip, which is why Ergon offers many grips in two size diameters Small and Large.The difference refers to the grip width (hand size), meaning a larger hand will have a more positive fit on a thicker grip, while a smaller hand is better fit to a smaller grip. For hand/glove sizes 6.5 to 8.5" we recommend Small, for 8.5 to 10.5" Large usually is better. To measure your hand/glove size you need to measure around the largest part of the hand over the knuckle while making a fist, excluding the thumb.
Building on the success of its standard GE1 model, the brand rotated the grip area of the GE1 Evo by 8% towards the steering axle. This design ensures the rider’s elbows get raised outwardly for increased steering control. Advanced Inner Construction Ergon really has obsessed over every detail with these grips. In addition to the advanced compound and shape, there’s a patent-pending inner construction. This features a forged inner clamp and the inner core is connected to an integrated grip end. The reason they adopted this design of the Ergon GE1 Evo factory grips was to increase the surface area for the hand right to the grip’s end, thus preventing pressure on the hand's outer nerves. This design also helps to dampen vibrations of sudden shocks and trail feedback.
Ergon GE1 Evo Factory GripsThe GE1 Evo Factory Grips build on the success of Ergon's GE1 model by offering an even softer compound for enhanced comfort and an anti-slip finish for extra grip. Designed using feedback from top Enduro World Series riders, these grips actively support a correct torso/forearm position when riding downhill. By rotating the grip area towards the steering axle by 8%, these grips ensure the elbows are raised outwardly for better control.Comfort That LastsIn addition to the comfort provided by the soft compound, the GE1 Evo's feature Ergon's patent-pending inner construction. This consists of a forged inner clamp with a fully integrated grip end that's connected to the inner core. This design provides a soft, vibration damping grip edge enabling your hand to grip right to the grip's edge, which removes pressure from the hand's sensitive outer ulnar nerve.Features: Material: GravityControl Rubber Clamps: Cold Forged Aluminium, CNC Machined, black anodised, carbon-friendly Replaceable bar end plugs Use: MTB, Enduro, Gravity, All-Mountain Size: Standard Option: For glove size Large/X-Large (8.5-10.5); Slim Option: For glove sizes Small/Medium (6.5-8.5) Weight: Standard: 105g (pair); Slim: 90g (pair)Buy Ergon Components from Chain Reaction Cycles. Ride. Eat. Sleep. Repeat.
More grip, more comfort and an even more grip. Never rest upon the successes of the previous day. With the GE1 Evo Ergon appeal to all Enduro riders and racers who are looking for more comfort, grip and a precise grip. With a super-soft compound and anti-slip finish, they provide lasting comfort and outstanding grip no matter how hard you're pushing.2 grip diameters: Standard for glove size Large/X-Large (8.5-10.5) & Slim for glove sizes Small/Medium (6.5-8.5)Carbon friendly CNC Aluminium clampsIntegrated end plugsMaterial: Gravity Control RubberThe aim of the GE1 update was to further increase the grip on the handlebars while further reducing required strength input. The results are more comfort, better control of your bike and an optimised arm position.The texture alignment is slightly adjusted against the hand rotation, intersecting channels in the gripping zone and differently shaped elements increase the grip of the GE1 Evo. The texture update is completed all the way to the edge of the grip itself, affording more room for comfort. The ulnar nerve on the outside of the hand is effectively relieved and numbness is prevented.Ergon really has obsessed over every detail with these grips. In addition to the advanced compound and shape, there s a patent-pending inner construction. This features a forged inner clamp and the inner core is connected to an integrated grip end. The reason Ergon adopted this design, was to increase the surface area for the hand right to the grip s end, thus preventing pressure on the hand's outer nerves. This design also helps to dampen vibrations of sudden shocks and trail feedback.
More grip, more comfort and an even more grip. Never rest upon the successes of the previous day. With the GE1 Evo Ergon appeal to all Enduro riders and racers who are looking for more comfort, grip and a precise grip. With a super-soft compound and anti-slip finish, they provide lasting comfort and outstanding grip no matter how hard you're pushing.2 grip diameters: Standard for glove size Large/X-Large (8.5-10.5) & Slim for glove sizes Small/Medium (6.5-8.5)Carbon friendly CNC Aluminium clampsIntegrated end plugsMaterial: Gravity Control RubberThe aim of the GE1 update was to further increase the grip on the handlebars while further reducing required strength input. The results are more comfort, better control of your bike and an optimised arm position.The texture alignment is slightly adjusted against the hand rotation, intersecting channels in the gripping zone and differently shaped elements increase the grip of the GE1 Evo. The texture update is completed all the way to the edge of the grip itself, affording more room for comfort. The ulnar nerve on the outside of the hand is effectively relieved and numbness is prevented.Ergon really has obsessed over every detail with these grips. In addition to the advanced compound and shape, there s a patent-pending inner construction. This features a forged inner clamp and the inner core is connected to an integrated grip end. The reason Ergon adopted this design, was to increase the surface area for the hand right to the grip s end, thus preventing pressure on the hand's outer nerves. This design also helps to dampen vibrations of sudden shocks and trail feedback.