Shelter is a self-adhesive, transparent protection with visco-elastic behaviour that protects carbon-fibre or metal structures it’s applied to. Available in two versions, Road and Off-Road, and three different formats each (Kit, Pack and Roll).Off Road - 1.2mm thick,Road - 0.6mm thick.Shelter Tape Off Road Kit Contains the following cut outs: 1 x Down Tube, 1 x Chain Stay, 1 x Top Tube/ Head Tube, 5 x Cable/ Hose spots.Shelter Tape Road Kit Contains the following cut outs:1 x Down Tube, 1 x Chain Stay, 8 x Cable spots, 4 presta valve hole (to reduce noise).Shelter Tape Road Pack and Off Road Pack contain:Two 54mm x 500mm lengths to be custom cut to your needs.Shelter Tape Road Roll and Off Road Roll contain:One 54mm x 5m length to be custom cut to your needs.Shelter tape is a multi-layer acrylic protection tape which dissipates any impact energy on two axisEach layer spreads loads vertically and horizontally, the impact energy decreases at each layer, protecting the bike framePerfect for carbon frames where the surface epoxy resin can be brittle and sensitive to impactsThe tape is clear, does not hide graphics and can be applied easily
The ideal tool for both professional mechanics and cycling enthusiasts, the Giustaforza 1-8 torque wrench has a very small head, to operate in tight spaces.Specifically designed for bicycle applicationsVery easy to useExtreme constructive quality for maximum reliability and durabilityVery small, non-ratcheting head, to operate in tight spacesNo batteries to replaceNo plastic partsMinimal, fixed head: The simple, non-ratcheting head has been designed to operate where space is limited, for example with some seat clamps. This small head is a unique asset to work in tight areas. Compatible with standard 1/4 bits.Lightweight: The light aluminium body keeps the weight below140 g, less than half the weight of other torque wrenches in this range of torque. This is paramount to get the right feedback at low torque values, without mistaking the effort to hold the tool with the applied torque.A state-of-the art tool, built to last: Functional, linear in design and precise in any detail: Giustaforza 1-8 has a hard-anodized aluminium body with laser-etched inscriptions, and it s built to last. The mechanical, click-type functioning makes the wrench extremely shock tolerant and the absence of batteries or electronics increase its reliability. Each sample is checked and numbered as a single masterpiece.
The Effetto Mariposa Giustaforza Bicycle Torque Wrench is an ideal tool for both professional mechanics and cycling enthusiasts, Giustaforza 1-8 torque wrench has a very small head, to operate in tight spaces.
Effetto Mariposa Giustaforza Torque Wrench (1-8Nm)The Giustaforza 1-8Nm Torque Wrench Effetto has a torque capacity from 1 - 8Nm that's ideal for smaller and sensitive bike components. Plus, its small head size is ideal for working on hard to reach areas on your bike.The Effetto Mariposa Giustaforza Bicycle Torque Wrench is an ideal tool for both professional mechanics and cycling enthusiasts, Giustaforza 1-8 torque wrench has a very small head, to operate in tight spaces. Features: Professional workshop-quality torque wrench Cycling enthusiasts 1-8 Nm torque wrenchBuy Effetto Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
The home-mechanic s dream tool, the Effetto Giustaforza II has a smaller, non-ratcheting head than the Pro, to operate in tight spaces. The Deluxe version is completed with cycling-specific bits and comes into a practical wrap package.Capacity from 2 up to 16Nm: This is the best torque range for precision bicycle applications and sensitive components. In use, always refer to the torque values specified on technical documents or printed on the parts themselves.Easy to Use: Set the desired torque rotating the wrench end knob, reading the torque value on the scale (scale resolution is 0,5 Nm, integers on one side, 0,5 on the other). Insert the appropriate bit (depending on the bolt you need to tighten). When using the tool, a loud CLICK and a 3° free movement tells when the torque has been reached. Always take the wrench to minimum torque value after use.Minimal Fixed Head: Giustaforza s simple, non-ratcheting head has been chosen on purpose on this version, to facilitate the tightening of bolts where space is very limited (like seatpost bolts parallel to the seatpost shaft in zero offset models). The head is now smaller than ever, to maximise this advantage.Lightweight: The light aluminium body keeps the weight down to a record-breaking sub-180g value, less than half the weight of other torque wrenches in this range of torque. This is paramount to get the right feedback at low torque values, without mistaking the effort to hold the tool with the applied torque.A State-of-the-Art Tool, Built to Last: Functional, linear in design and precise in any detail: shouldn t be a surprise to know that Giustaforza II 2-16 has been conceived and produced in Italy. The tool is hard-anodized with laser-etched inscriptions, and it s built to last. The mechanical, click-type functioning make the wrench extremely shock tolerant and the absence of batteries or electronics further increase its reliability. Each sample is checked and numbered as a single masterpiece.
The Effetto Mariposa Giustaforza Bicycle Torque Wrench is an ideal tool for both professional mechanics and cycling enthusiasts, the Giustaforza 1-8 torque wrench has a very small head, to operate in tight spaces. This Deluxe version is completed with cycling-specific bits in a practical wrap package.Specifically designed for bicycle applicationsVery easy to useExtreme constructive quality for maximum reliability and durabilityVery small, non-ratcheting head, to operate in tight spacesNo batteries to replaceNo plastic parts10x25mm (HEX2, HEX2.5, HEX3, HEX6, T10, T15, T20, T30, -3/16, +PH1)3x100mm (HEX4, HEX5, T25)1x100mm (extension)Capacity from 1 up to 8 Nm: The Giustaforza 1-8 is especially attractive for very sensitive bolts. On those, where the right torque matters most, tightening values can be easily exceeded without the user knowing. Going as low as 1 Nm puts the Giustaforza 1-8 in a league on its own. In use, always refer to the torque values specified on technical documents or printed on the parts themselves.Minimal, fixed head: The simple, non-ratcheting head has been designed to operate where space is limited, for example with some seat clamps. This small head is a unique asset to work in tight areas. Compatible with standard 1/4 bits.Lightweight: The light aluminium body keeps the weight below140 g, less than half the weight of other torque wrenches in this range of torque. This is paramount to get the right feedback at low torque values, without mistaking the effort to hold the tool with the applied torque.A state-of-the art tool, built to last: Functional, linear in design and precise in any detail: Giustaforza 1-8 has a hard-anodized aluminium body with laser-etched inscriptions, and it s built to last. The mechanical, click-type functioning makes the wrench extremely shock tolerant and the absence of batteries or electronics increase its reliability. Each sample is checked and numbered as a single masterpiece.Bits include a 100 mm-long extension, three 100 mm-long bits (hex 4, hex 5 e T25) plus several other Torx and hex bits in standard length (25 mm). All bits are manufactured from S2 special steel, with very high (62 Hrc) surface hardness, to ensure maximum durability.
A workshop favourite, this smaller and highly reliable headed torque wrench including bits from Effetto Giustaforza is ideal for keeping your bike at peak performance. With a capacity of 2 up to 16 NM, you can work precisely on sensitive components quickly and securely. The Giustaforza II torque wrench is made from high-quality construction for maximum performance and durability when you need it most. The home mechanic's dream tool, the Effetto Giustaforza II has a smaller, non-ratcheting head than the Pro, to operate in tight spaces. The Deluxe version is completed with cycling-specific bits and comes into a practical wrap package. Capacity from 2 up to 16 Nm: This is the best torque range for precision bicycle applications and ‘sensitive’ components. In use, always refer to the torque values specified on technical documents or printed on the parts themselves. How to use: Set the desired torque rotating the wrench end knob, reading the torque value on the scale (scale resolution is 0.5 Nm, integers on one side, 0.5 on the other) Insert the appropriate bit (depending on the bolt you need to tighten) Using the tool, a loud ‘CLICK’ and a 3° free-movement tells when the torque has been reached Always take the wrench to minimum torque value after use. Minimal fixed head: Giustaforza’s simple, ‘non-ratcheting’ head has been chosen on purpose on this version, to facilitate the tightening of bolts where space is very limited (like seatpost bolts parallel to the seatpost shaft in zero offset models). The head is now smaller than ever, to maximise this advantage. Lightweight: the light aluminium body keeps the weight down to a record-breaking sub-180g value, less than half the weight of other torque wrenches in this range of torque. This is paramount to get the right feedback at low torque values, without mistaking the effort to hold the tool with the applied torque. A state-of-the-art tool, built to last: functional, linear in design and precise in any detail: shouldn’t be a surprise to know that Giustaforza II 2-16 has been conceived and produced in Italy. The tool is hard-anodized with laser-etched inscriptions, and it’s built to last. The mechanical, click-type functioning make the wrench extremely shock tolerant and the absence of batteries or electronics furtherly increase its reliability. Each sample is checked and numbered as a single masterpiece. Calibration service: the +-4% tolerance is guaranteed for 5000 cycles (5000 ‘clicks’), then the wrench should be re-calibrated. Calibration is a service offered by Effetto Giustaforza in their laboratories to future proof the tool. After every calibration, the tolerance of +-4% over nominal value will extend for 5000 cycles. After calibration, the wrench will return to the customer with a calibration certificate.
Effetto Mariposa Giustaforza II Deluxe Torque WrenchThe Giustaforza II Deluxe Torque Wrench from Effetto is a workshop quality wrench that's ideal for precise and reliable tooling on bike components. Plus, it has a torque capacity from 2 up to 16 Nm and comes supplied with bike-specific bits and a durable carry wrap case.A workshop favourite, this smaller and highly reliable headed torque wrench including bits from Effetto Giustaforza is ideal for keeping your bike at peak performance. With a capacity of 2 up to 16 NM, you can work precisely on sensitive components quickly and securely. The Giustaforza II torque wrench is made from high-quality construction for maximum performance and durability when you need it most. The home mechanic's dream tool, the Effetto Giustaforza II has a smaller, non-ratcheting head than the Pro, to operate in tight spaces. The Deluxe version is completed with cycling-specific bits and comes into a practical wrap package. Capacity from 2 up to 16 NmThis is the best torque range for precision bicycle applications and 'sensitive' components. In use, always refer to the torque values specified on technical documents or printed on the parts themselves. How to use:Set the desired torque rotating the wrench end knob, reading the torque value on the scale (scale resolution is 0.5 Nm, integers on one side, 0.5 on the other) Insert the appropriate bit (depending on the bolt you need to tighten) Using the tool, a loud 'CLICK' and a 3° free-movement tells when the torque has been reached Always take the wrench to minimum torque value after use. Minimal fixed head: Giustaforza's simple, 'non-ratcheting' head has been chosen on purpose on this version, to facilitate the tightening of bolts where space is very limited (like seatpost bolts parallel to the seatpost shaft in zero offset models). The head is now smaller than ever, to maximise this advantage. Lightweight: the light aluminium body keeps the weight down to a record-breaking sub-180g value, less than half the weight of other torque wrenches in this range of torque. This is paramount to get the right feedback at low torque values, without mistaking the effort to hold the tool with the applied torque. A state-of-the-art tool, built to last: functional, linear in design and precise in any detail: shouldn't be a surprise to know that Giustaforza II 2-16 has been conceived and produced in Italy. The tool is hard-anodized with laser-etched inscriptions, and it's built to last. The mechanical, click-type functioning make the wrench extremely shock tolerant and the absence of batteries or electronics furtherly increase its reliability. Each sample is checked and numbered as a single masterpiece. Calibration service: the +-4% tolerance is guaranteed for 5000 cycles (5000 'clicks'), then the wrench should be re-calibrated. Calibration is a service offered by Effetto Giustaforza in their laboratories to future proof the tool. After every calibration, the tolerance of +-4% over nominal value will extend for 5000 cycles. After calibration, the wrench will return to the customer with a calibration certificate. Features:Powerful and precise Torque wrenchCapacity from 2 up to 16 NmIdeal for bicycle fitting, tuning and toolingHigh-quality construction 10x25mm: HEX2, HEX2.5, HEX3, HEX6, T10 3x100mm: HEX4, HEX5, T25 1x100mm (extension) Torx Bits: T15, T20, T30, -3/16, +PH1 Torque Capacity: from 2 up to 16 NmBuy Effetto Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
The home-mechanic s dream tool, the Effetto Giustaforza II has a smaller, non-ratcheting head than the Pro, to operate in tight spaces. The Deluxe version is completed with cycling-specific bits and comes into a practical wrap package.This Deluxe version is equipped with a bicycle-specific bit set:Bits include a 100 mm-long extension, three 100 mm-long bits (hex 4, hex 5 and T25) plus several other Torx and hex bits in standard length (25 mm). That covers all the needs of newest Shimano, SRAM and Campagnolo high-end groupsets, plus those of reversed-bolt stems.10x25mm (HEX2, HEX2.5, HEX3, HEX6, T10, T15, T20, T30, -3/16, +PH1)3x100mm (HEX4, HEX5, T25)1x100mm (extension)All bits are manufactured from S2 special steel, with very high (62 Hrc) surface hardness, to ensure maximum durability.Capacity from 2 up to 16Nm: This is the best torque range for precision bicycle applications and sensitive components. In use, always refer to the torque values specified on technical documents or printed on the parts themselves.Easy to Use: Set the desired torque rotating the wrench end knob, reading the torque value on the scale (scale resolution is 0,5 Nm, integers on one side, 0,5 on the other). Insert the appropriate bit (depending on the bolt you need to tighten). When using the tool, a loud CLICK and a 3° free movement tells when the torque has been reached. Always take the wrench to minimum torque value after use.Minimal Fixed Head: Giustaforza s simple, non-ratcheting head has been chosen on purpose on this version, to facilitate the tightening of bolts where space is very limited (like seatpost bolts parallel to the seatpost shaft in zero offset models). The head is now smaller than ever, to maximise this advantage.Lightweight: The light aluminium body keeps the weight down to a record-breaking sub-180g value, less than half the weight of other torque wrenches in this range of torque. This is paramount to get the right feedback at low torque values, without mistaking the effort to hold the tool with the applied torque.A State-of-the-Art Tool, Built to Last: Functional, linear in design and precise in any detail: shouldn t be a surprise to know that Giustaforza II 2-16 has been conceived and produced in Italy. The tool is hard-anodized with laser-etched inscriptions, and it s built to last. The mechanical, click-type functioning make the wrench extremely shock tolerant and the absence of batteries or electronics further increase its reliability. Each sample is checked and numbered as a single masterpiece.
The home-mechanic’s dream tool, the Giustaforza II has a smaller, non-ratcheting head than the Pro, to operate in tight spaces. The DELUXE version is completed with cycling-specific bits and comes into a practical wrap package.Capacity from 2 up to 16 Nm: This is the best torque range for precision bicycle applications and ‘sensitive’ components. In use, always refer to the torque values specified on technical documents or printed on the parts themselves.Easy to use:Set the desired torque rotating the wrench end knob, reading the torque value on the scale (scale resolution is 0,5 Nm, integers on one side, 0,5 on the other). Insert the appropriate bit (depending on the bolt you need to tighten). When using the tool, a loud ‘CLICK’ and a 3° free-movement tells when the torque has been reached. Always take the wrench to minimum torque value after use.Minimal fixed head:Giustaforza’s simple, ‘non-ratcheting’ head has been chosen on purpose on this version, to facilitate the tightening of bolts where space is very limited (like seatpost bolts parallel to the seatpost shaft in zero offset models). The head is now smaller than ever, to maximise this advantage.Lightweight:The light aluminium body keeps the weight down to a record-breaking sub-180g value, less than half the weight of other torque wrenches in this range of torque. This is paramount to get the right feedback at low torque values, without mistaking the effort to hold the tool with the applied torque.A state-of-the art tool, built to last:Functional, linear in design and precise in any detail: shouldn’t be a surprise to know that Giustaforza II 2-16 has been conceived and produced in Italy. The tool is hard-anodized with laser-etched inscriptions, and it’s built to last. The mechanical, click-type functioning make the wrench extremely shock tolerant and the absence of batteries or electronics further increase its reliability. Each sample is checked and numbered as a single masterpiece.Controlled torque:The DELUXE version is equipped with a bicycle-specific bit set:bits include a 100 mm-long extension, three 100 mm-long bits (hex 4, hex 5 e T25) plus several other Torx and hex bits in standard length (25 mm). That covers all the needs of newest Shimano, Sram and Campagnolo high-end groupsets, plus those of reversed-bolt stems.All bits are manufactured from S2 special steel, with very high (62 Hrc) surface hardness, to ensure maximum durability.Detail of bits:10x25mm (HEX2, HEX2.5, HEX3, HEX6, T10, T15, T20, T30, -3/16, +PH1)3x100mm (HEX4, HEX5, T25)1x100mm (extension)
Targeted at professional users, the Effetto Giustaforza II 2Nm-16Nm Pro is red anodized and has a reversible ratcheting head. The Deluxe Pro version is completed with cycling-specific bits and comes into a practical wrap package.This Deluxe Pro version is equipped with a bicycle-specific bit set:Bits include a 100 mm-long extension, three 100 mm-long bits (hex 4, hex 5 e T25) plus several other Torx and hex bits in standard length (25 mm). That covers all the needs of newest Shimano, Sram and Campagnolo high-end groupsets, plus those of reversed-bolt stems.All bits are manufactured from S2 special steel, with very high (62 Hrc) surface hardness, to ensure maximum durability.10x25mm (HEX2, HEX2.5, HEX3, HEX6, T10, T15, T20, T30, -3/16, +PH1)3x100mm (HEX4, HEX5, T25)1x100mm (extension)Capacity from 2 up to 16 Nm: This is the best torque range for precision bicycle applications and sensitive components. In use, always refer to the torque values specified on technical documents or printed on the parts themselves.Easy to use: Set the desired torque rotating the wrench end knob, reading the torque value on the scale (scale resolution is 0,5 Nm, integers on one side, 0,5 on the other) insert the appropriate bit (depending on the bolt you need to tighten). When using the tool, a loud CLICK and a 3° free movement tells when the torque has been reached. Always take the wrench to minimum torque value after use.Ratcheting head: For a higher productivity in professional applications, Giustaforza II Pro gets a very small yet highly reliable ratcheting head. 1/4 square (1/4 square/hex adapter provided, to be able to use standard bits).Lightweight: The light aluminium body keeps the weight down to a record-breaking sub-200g value, less than half the weight of other torque wrenches in this range of torque. This is paramount to get the right feedback at low torque values, without mistaking the effort to hold the tool with the applied torque.A state-of-the art tool, built to last: Functional, linear in design and precise in any detail: shouldn t be a surprise to know that Giustaforza II 2-16 Pro has been designed and produced in Italy. The tool is hard-anodized with laser-etched inscriptions and is built to last. The mechanical, click-type functioning make the wrench extremely shock tolerant and the absence of batteries or electronics further increase its reliability. Each sample is checked and numbered as a single masterpiece.
With a torque range from 10 up to 60 Nm, this Effetto Giustaforza II 10Nm-60Nm Pro tool is standard equipment of the best cycling workshops. Design is inspired by smaller Giustaforza, constructive quality and reliability are state-of-the art. This bike wrench is supplied with a 3/8-1/2 adapter included (as suggested by Greg Kopecky/Slowtwitch.com in his review).10 up to 60 Nm RangeQuality and reliabilityState-of-the art Torque wrench3/8-1/2 adapter includedCapacity from 10 up to 60 Nm: This torque range is ideal for the elements of the bicycle with the highest torque specifications (bottom bracket, cassettes). In use, always refer to the torque values specified on technical documents or printed on the parts themselves.Easy to use: Unlock the wrench-end knob by gently pulling it and set the desired torque value rotating the knob and reading the torque on the scale. After setting the torque value, push the knob back in place, to prevent unwanted changes to the set value while using the wrench. Depending on the rotation direction of the part you want to tighten, push the square section bar through the wrench head to one side or the other. When using the tool, a loud CLICK and a 3° free movement tells when the torque has been reached. Always take the wrench to minimum torque value after use.A state-of-the art tool, built to last: Functional, linear in design and precise in any detail: shouldn t be a surprise to know that Giustaforza II 10-60 has been conceived and produced in Italy. The tool has laser-etched inscriptions and is built to last. The mechanical, click-type functioning make the wrench extremely shock tolerant and the absence of batteries or electronics, increase its reliability. Each sample is checked and numbered as a single masterpiece.Calibration service: The +-4% tolerance is guaranteed for 5000 cycles (5000 clicks ), then the wrench should be re-calibrated. Calibration is a service Effetto offer in their laboratories at the cost of 35 plus shipping expenses. After every calibration, the tolerance of +-4% over nominal value will extend for 5000 cycles. After calibration, the wrench will be returned to the customer with a calibration certificate.