Mass is the enemy of performance so we pulled out all the stops to make the Alpinist Seatpost the lightest post we’ve ever seen that passes our standards. At 136 grams (27.2mm x 300mm) it’s about as light as you’ll find. Not only does light weight make for faster climbing it also improves acceleration and ride quality. The Alpinist 2-bolt micro-adjust clamp with extended saddle cradle ensures precision fit and secure retention. Available in two sizes 27.2mm x 300mm and 27.2mm x 360mm each with a 12mm setback. And because they are backed by a no-fault crash replacement policy and lifetime warranty you can rest easy knowing that we’ve got your back. Advanced composite construction delivers light weight and reliability. 2-bolt micro-adjust clamp with 46mm saddle rail cradle enables an effective offset from 0mm to 20mm. No-Fault crash replacement policy. Lifetime warranty Available in two sizes: 27.2mm x 300mm x 12mm offset 27.2mm x 360mm x 12mm offset 136 grams (27.2mm x 300mm) System Weight Limit: 275lbs / 125kg
A tiny bag with big potential. Together with tough materials an internal pocket and a built-in light loop. Big enough to fit an MTB tube a multi tool 2 tire levers and a CO2 inflator w/cartridge. 0.4L
31.8MM diamiter seat clamp for Specialized posts.
We wholeheartedly believe here at goodr that golf is fun. Why does it have to be so serious? Lighten up! For that reason we have dubbed our golf-specific lens 'Flamingo Eye™ Technology.' All the HD contrast and performance without any of the self-importance. Preparing to head out for 18 holes with your crew when HOLY SH&%! you can't find your lucky sweater vest! You know the one you've worn to every round since that one day you flamingoed every. Single. Hole. Don't Fret. You can wrap your face in the lucky comfort of these argyle shades and continue to enjoy Flamingo Domination on the green! FLAMINGO EYE™ TECHNOLOGY: Polarized lenses enhance the colors on the course so you can see your ball as you sink your hole in one NO SLIP: We use enhanced silicone inserts with special grip coating to help eliminate slippage when sinking that flamingo putt.**Flamingo is the new universally accepted official term for bogey. NO BOUNCE: Our frame is snug and lightweight with a comfortable fit to prevent bouncing while you're swinging out of your shoes. NO SQUIRRELS
Designed for use with quattro eggbeater and candy pedals. Enables you to use crankborthers pedals with 3 bolt cleat fitting road shoes. Composite platform and brass cleat Float: 6 degrees Release angle: 15 or 20 degrees Bolt pattern: 3 bolt
Ultra durable brass cleats for eggbeater candy smarty acid and mallet pedals. Premium strength brass Release angle: 15 degrees Bolt pattern: 2 bolt Adjustment: 2.2mm left/right Shims included
Ultra durable brass cleats for crankbrother pedals. Premium strength brass Release angle: 10 degrees Bolt pattern: 2 bolt Adjustment: 2.2mm left/right Shims included
The eggbeater's simple design gives the advantage of amazing mud shedding and 4 points of entry making it perfect for XC trail riding and cyclo cross. The crankbrothers eggbeater is an iconic pedal designed by Carl and Frank the original founders of crankbrothers they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal and later it was adapted into the candy pedal. Cleat: Premium brass cleats included Shims: Included Release Angle: 15° to 20° Warranty: 2 years Weight: 286g per pair Spindle: Forged scm435 chromoly steel Body: stamped steel Wings: Stamped steel Spring: 300 series stainless steel Inner bearing: Bushing Outer bearing: Cartridge Maximum rider weight: No restrictions Colours: Silver/Black or Silver/Red As with the rest of the crankbrothers range the pedals are fully serviceable with a level 1 / 2 service kit (product code CRB-11729). Servicing is simple and does not require any specialist tools just a flat head screwdriver socket wrench and 8mm allen key to hold the pedal by the axle. We recommend that the pedal is cleaned and greased every 30 hours of riding and the bearings are inspected for wear.
The eggbeater's simple design gives the advantage of amazing mud shedding and 4 points of entry making it perfect for XC trail riding and cyclo cross. The crankbrothers eggbeater is an iconic pedal designed by Carl and Frank the original founders of crankbrothers they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal and later it was adapted into the candy pedal. Cleat: Premium brass cleats included Shims: Included Release Angle: 15° to 20° Warranty: 5 years Weight: 278g per pair Spindle: Forged scm435 chromoly steel Body: cast stainless steel Wings: cast stainless steel Spring: 300 series stainless steel Inner bearing: Needle Outer bearing: Cartridge Maximum rider weight: No restrictions Colours options: Silver/Blue or Silver/Red You can customise the fit and feel of your pedal using crankbrothers tread contact sleeves (CRB-13282). They shims come with 3 different thicknesses enabling the rider to ensure good contact between their shoes and the pedal axle (as the tread wears down the contact can move away from the axle and onto the wings of the pedal). You may also like to run the pedals on your road / commuter bike. Buy a set of Quattro cleats (CRB-15289) to use on your road shoes. It makes pulling off from junctions a breeze as you have 4 points of entry to the pedals. As with the rest of the crankbrothers range the pedals are fully serviceable with a level 3 / 11 service kit (product code CRB-11730). Servicing is simple and does not require any specialist tools just a flat head screwdriver socket wrench and 8mm allen key to hold the pedal by the axle. We recommend that the pedal is cleaned and greased every 30 hours of riding and the bearings are inspected for wear.
Sleeves snap on to the next gen candy and eggbeaters to tighten the interface between the shoe and pedal. Includes: 1mm 2mm 3mm sleeves Compatible with candy and eggbeater 11 3 and 2
Zipp’s Service Course seatpost is light weight and strong for security and designed to offer a precise fit at an affordable price. It also provides easy tool access to the downward facing bolt for easy setup and micro adjustments after it’s mounted. Better fit means better performance to make you faster. An out-of-position saddle means wasted energy with every pedal stroke. The secure low-profile clamp allows the saddle to slide farther back along the rails and with 0 and 20mm setback options it’s possible for nearly any rider to achieve the perfect fit. For high strength low weight and efficient use of every gram the shaft and head are not bonded but are 3D-forged from 6061 aluminum. The Service Course seatpost is 350mm in length. FEATURES Two cosmetic options bead-blast black or distinctive silver 2-bolt adjustability 3D-forged from 6061 aluminum Fits all common saddle rail types Lifetime warranty SPECIFICATIONS POST DIAMETER 27.2mm 31.6mm OFFSET/SETBACK 0mm 20mm POST LENGTH 350mm COLOR (SP) Blast Black Bright Silver MATERIAL (SP/ST) Al-6061 HARDWARE Steel CLAMP MATERIAL Al-6061
Zipp’s SL Speed Seatpost has become a favorite of road and cyclocross pros because of its light weight and dependability. Zipp’s engineers used SRAM’s Exogram technology to make the tube as lightweight as possible and optimized our clamping system for adjustability security and ease of use. What’s more the SL Speed is available in a 400mm length to accommodate road bikes with compact frame geometry. SL Speed carbon seatpost is available in 0mm or 20mm setback options. FEATURES Updated distinctive Zipp cosmetics Designed using SRAM Exogram™ technology 27.2 and 31.6mm in 400mm length Also available the Zipp SL Speed DI2 Internal Battery Mount to hold a Shimano® DI2 seatpost battery within the SL Speed Seatpost Mount sold separately as an accessory. Matte Black finish Lifetime warranty SPECIFICATIONS POST DIAMETER 27.2mm 31.6mm OFFSET/SETBACK 0mm 20mm POST LENGTH 400mm COLOR (SP) Matte with stealth decals MATERIAL (SP/ST) Unidirectional Carbon HARDWARE Steel CLAMP MATERIAL Al-6061