The newly redesigned EC70 SL Seatpost takes Easton s superlight unidirectional carbon and applies their patent pending saddle adjustment allowing for independent seat angle and fore-aft movement.Weight: 225gFinish: Matte Black UD Carbon / Matte Black HeadHead Offset: 0mmLength: 350mm with 80mm min insertQuill size: 27.2mmMaterial: EC70 Carbon Fibre
Patented LINK clamp works with all standard saddle rail designs as well as Ritchey Vector Evo™ and Selle Italia MonoLink™ saddles with separate adapter LINK Carbon Posts use FlexLogic carbon layup developed for ProTour team bikes from Stevens, Canyon and Scott – 15% more vertically compliant with no loss of lateral or torsional stiffness 15mm of offset and a reversible clamp which allows for an additional 10mm of fore-aft saddle adjustment
Each seat-post employs 24 individual ‘plies’ of carbon, pre-impregnated with a highly toughened epoxy resin system, designed to ensure a safe and rugged unit. The bulk of the laminate comprises Unidirectional T700 fibre – the highest strength Standard Modulus fibre available. (Unidirectional fibres provide the maximum tensile strength and stiffness with minimum weight.) This is combined with strategically positioned plies of 3K twill woven fabric, adding hoop strength to resist clamping forces and mitigating failure mode in the event of serious crash damage. The 1K 2x2 twill weave fabric outer ply, also contributes in this respect together with a super smooth finish and striking visual aesthetic.
The Leatt Chest Protector 3.5 is both slim and lightweight and yet protection levels are outstanding. It's the hardshell protector for the mountain bike/MX racer who loves to push their limits.The Chest Protector 3.5 combines hard shell armour and 3DF AirFit ventilated soft impact foam to deliver CE certified level 1 protection to the chest and back and also achieves both FIM and FFM certification. With the BraceOn™ neck brace fitting system it's also perfectly compatible with Leatt's neck braces and you can run over or under your MTB/MX jersey, depending on your preference.Thanks to a 3D design, adjustable waist straps and padded base layer, the Chest Protector 3.5 fits brilliantly. Comfort is further enhanced thanks to the targetted venting, keeping air flowing to the body to evaporate sweat. Key Features: Total Leatt® protection score of 7 points, Very lightweight hard shell and 3DF AirFit ventilated soft impact foam,CE tested and certified as impact protection: Chest prEN1621-3 Level 1,Back EN1621-2 Level 1, . , FIM-Federation International Certified, FFM-French Federation Certified, The 3D design ensures a great fit that is very comfortable, Ventilation slots for maximum airflow, Removable front and rear plates and BraceOn™ neck brace fitting system allow over / under the shirt Leatt® neck brace fit, Weight: from 750g (1,65 lbs), Unisex Fit: 70 to 90 kg (154-198lbs).
Flexible holder for bikepacking gear that attaches to saddle and seatpost for maximum stability. The construction has aluminum frames where the lower section can move freely to accommodate larger items. Two sets of compression straps will secure your drybag or tent, and attaching and detaching gear is easy thanks to the quick-release camlock buckles. Comes with an extra compression strap for larger loads and is perfect with the Specialized/Fjällräven Seatbag Drybags, 10 or 16 liters. Its compact size (45 x 11 x 20cm) makes it compatible with most frames and wheel clearances. Part of the Specialized/Fjällräven series for urban rides and bikepacking adventures.Durable design with Vinylon panels and aluminum stabilizer frames.,Lower frame extends downwards to create more packing space.,Adaptable fixtures that fit most saddle rails and seatposts.,Double camlock compression straps ensure gear stays in place.,Reflective details increase visibility in low-light conditions.,Material- Vinylon F (100% vinylal).
Deda Elementi Superzero 25mm Setback Seat PostThis stunning seatpost is engineered for fast-paced road use as it gives you outstanding comfort and support as you clock up the miles on your road bike. It features an awesome unidirectional carbon construction which allows it to produce a competitive strength to weight ratio. This means you'll benefit from its exceptional durability on longer journeys while its low weight profile shaves off valuable weight from your road bike. Features: Material: Unidirectional CarbonUse: RoadSetback: 25mmLength: 350mmRail Compatibility: Ø7x9.5mm Oval-shaped railsDi2 Compatibility: Compatibile with Deda adaptor for Di2 internal batteryPart Number: DPA316W (31.6mm version)Weight: 215g (approx)Buy Deda Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Meeting stringent European standards, the Leatt Junior Body Protector 3DF AirFit Lite is one for the MTB aficionados, a flexible form of body armour ready and waiting to keep young shredders safe on the trail. Offering lightweight coverage to the chest, back, elbows and shoulders, the armour protects your body by hardening upon impact with outside agents. Registering an impressive 18 points on the brand’s protection system, the Junior Body Protector 3DF AirFit Lite provides a perfect fit to your torso and has a sandwich-type lay-up that allows for added movement between the layers. Permitting impressive bending capabilities, comfort is inspired while the protector is also compatible with a neck brace. Other key technology: CE tested and certified as impact protection: Chest: prEN1621-3 Level 1; Back: EN1621-2 Level 1; Shoulder: EN1621-1 FFM-French Federation certified Total Leatt® protection score of 18 points Multi-layer, perforated back and chest protectors Lighter, more comfortable and flexible Extra upper-chest impact protection layer for non-neck brace users
Leatt MTB AllMtn 4.0 HelmetThe Leatt MTB AllMtn 4.0 Helmet is just right for the more adventurous mountain biker who loves to explore big mountain trails. Fully featured for big days out, it keeps you safer when you lose control. Be it pedalling up or lift-assisted escapades, you can be sure that once you're in the zone and picking your lines, the MTB AllMtn 4.0 Helmet won't cause you any distractions. However, should you get caught out by tricky terrain or a sudden loss of grip, it gives reliable impact protection too - all being well you'll be dusting yourself down all safe and sound. Incredible Impact ProtectionThe MTB AllMtn 4.0 Helmet is packed with head-protecting features, keeping you safer when you find yourself caught up in a crash. At the heart of the 4.0 is a dual foam construction, featuring EPS + EP0 impact foams. These foams work in unison to soak up the forces of both slow and high-speed crashes. This protective layer is covered by a tough Polymer outer shell, enhancing structural strength and durability.An adjustable visor not only keeps off sun and dirt but if you wear goggles, the adjustability lets you easily store them below the visor too. And in the event of a crash, the visor is designed to break away, reducing the effects of rotation force impacts.360 ̊ Turbine TechnologyA key feature of this helmet is the 360 ̊ Turbine Technology. This is focused on reducing the damaging effects of a crash on your brain. It works via 360 ̊ moving discs, all made from an energy-absorbing material. These impart a reduction of rotational acceleration to the head and brain by up to 40%. The system also improves the absorption of impact energy - it reduces peak brain acceleration by up to 30% at the impact speeds associated with concussion. Feel the FreshnessWhile the focus is of course on keeping your head protected, the AllMtn 4.0 also delivers on comfort too. With 18 air vents, you'll always enjoy optimal airflow over your head, preventing too much heat from causing discomfort. With inner channels, this airflow works at both low and high speeds too. Even when you're riding hard and enjoying the heat of summer, the internal padding is quick to deal with sweat. It draws away moisture quickly to prevent it from pooling on the skin, leaving you dry and comfy. It's odour resistant too, keeping nasty smells and itch scalp at bay, ride after ride. And if you want that brand-new feel, simply remove the padding and throw it in the wash.A quick-adjust system allows you to dial in a secure fit incredibly easily while a Fidlock magnetic buckle makes it easy to pull your AllMtn 4.0 on and off. There's also a sunglasses dock port for easy, secure storage of your eyewear.Features:Lightweight Polymer shellIn-moulded EPS + EP0 impact foam for superior energy absorption360-degree Turbine Technology - Reduces forces associated with concussionAdjustable visor with breakaway function for rotational impact force reductionMaximized ventilation with 18 vents - Optimized for riding and effective even at low speedsFidlock magnetic closure systemSunglasses dock port for easy, secure storageMoisture-wicking, breathable, anti-odour and washable inner linerCertified and tested: EN1078Weight: From 430gBuy Leatt Protection from Chain Reaction Cycles, the World's Largest Online Bike Store.
Leatt MTB AllMtn 4.0 HelmetThe Leatt MTB AllMtn 4.0 Helmet is just right for the more adventurous mountain biker who loves to explore big mountain trails. Fully featured for big days out, it keeps you safer when you lose control. Be it pedalling up or lift-assisted escapades, you can be sure that once you're in the zone and picking your lines, the MTB AllMtn 4.0 Helmet won't cause you any distractions. However, should you get caught out by tricky terrain or a sudden loss of grip, it gives reliable impact protection too - all being well you'll be dusting yourself down all safe and sound. Incredible Impact ProtectionThe MTB AllMtn 4.0 Helmet is packed with head-protecting features, keeping you safer when you find yourself caught up in a crash. At the heart of the 4.0 is a dual foam construction, featuring EPS + EP0 impact foams. These foams work in unison to soak up the forces of both slow and high-speed crashes. This protective layer is covered by a tough Polymer outer shell, enhancing structural strength and durability.An adjustable visor not only keeps off sun and dirt but if you wear goggles, the adjustability lets you easily store them below the visor too. And in the event of a crash, the visor is designed to break away, reducing the effects of rotation force impacts.360 ̊ Turbine TechnologyA key feature of this helmet is the 360 ̊ Turbine Technology. This is focused on reducing the damaging effects of a crash on your brain. It works via 360 ̊ moving discs, all made from an energy-absorbing material. These impart a reduction of rotational acceleration to the head and brain by up to 40%. The system also improves the absorption of impact energy - it reduces peak brain acceleration by up to 30% at the impact speeds associated with concussion. Feel the FreshnessWhile the focus is of course on keeping your head protected, the AllMtn 4.0 also delivers on comfort too. With 18 air vents, you'll always enjoy optimal airflow over your head, preventing too much heat from causing discomfort. With inner channels, this airflow works at both low and high speeds too. Even when you're riding hard and enjoying the heat of summer, the internal padding is quick to deal with sweat. It draws away moisture quickly to prevent it from pooling on the skin, leaving you dry and comfy. It's odour resistant too, keeping nasty smells and itch scalp at bay, ride after ride. And if you want that brand-new feel, simply remove the padding and throw it in the wash.A quick-adjust system allows you to dial in a secure fit incredibly easily while a Fidlock magnetic buckle makes it easy to pull your AllMtn 4.0 on and off. There's also a sunglasses dock port for easy, secure storage of your eyewear.Features:Lightweight Polymer shellIn-moulded EPS + EP0 impact foam for superior energy absorption360-degree Turbine Technology - Reduces forces associated with concussionAdjustable visor with breakaway function for rotational impact force reductionMaximized ventilation with 18 vents - Optimized for riding and effective even at low speedsFidlock magnetic closure systemSunglasses dock port for easy, secure storageMoisture-wicking, breathable, anti-odour and washable inner linerCertified and tested: EN1078Weight: From 430gBuy Leatt Protection from Chain Reaction Cycles, the World's Largest Online Bike Store.
Leatt MTB AllMtn 4.0 HelmetThe Leatt MTB AllMtn 4.0 Helmet is just right for the more adventurous mountain biker who loves to explore big mountain trails. Fully featured for big days out, it keeps you safer when you lose control. Be it pedalling up or lift-assisted escapades, you can be sure that once you're in the zone and picking your lines, the MTB AllMtn 4.0 Helmet won't cause you any distractions. However, should you get caught out by tricky terrain or a sudden loss of grip, it gives reliable impact protection too - all being well you'll be dusting yourself down all safe and sound. Incredible Impact ProtectionThe MTB AllMtn 4.0 Helmet is packed with head-protecting features, keeping you safer when you find yourself caught up in a crash. At the heart of the 4.0 is a dual foam construction, featuring EPS + EP0 impact foams. These foams work in unison to soak up the forces of both slow and high-speed crashes. This protective layer is covered by a tough Polymer outer shell, enhancing structural strength and durability.An adjustable visor not only keeps off sun and dirt but if you wear goggles, the adjustability lets you easily store them below the visor too. And in the event of a crash, the visor is designed to break away, reducing the effects of rotation force impacts.360 ̊ Turbine TechnologyA key feature of this helmet is the 360 ̊ Turbine Technology. This is focused on reducing the damaging effects of a crash on your brain. It works via 360 ̊ moving discs, all made from an energy-absorbing material. These impart a reduction of rotational acceleration to the head and brain by up to 40%. The system also improves the absorption of impact energy - it reduces peak brain acceleration by up to 30% at the impact speeds associated with concussion. Feel the FreshnessWhile the focus is of course on keeping your head protected, the AllMtn 4.0 also delivers on comfort too. With 18 air vents, you'll always enjoy optimal airflow over your head, preventing too much heat from causing discomfort. With inner channels, this airflow works at both low and high speeds too. Even when you're riding hard and enjoying the heat of summer, the internal padding is quick to deal with sweat. It draws away moisture quickly to prevent it from pooling on the skin, leaving you dry and comfy. It's odour resistant too, keeping nasty smells and itch scalp at bay, ride after ride. And if you want that brand-new feel, simply remove the padding and throw it in the wash.A quick-adjust system allows you to dial in a secure fit incredibly easily while a Fidlock magnetic buckle makes it easy to pull your AllMtn 4.0 on and off. There's also a sunglasses dock port for easy, secure storage of your eyewear.Features:Lightweight Polymer shellIn-moulded EPS + EP0 impact foam for superior energy absorption360-degree Turbine Technology - Reduces forces associated with concussionAdjustable visor with breakaway function for rotational impact force reductionMaximized ventilation with 18 vents - Optimized for riding and effective even at low speedsFidlock magnetic closure systemSunglasses dock port for easy, secure storageMoisture-wicking, breathable, anti-odour and washable inner linerCertified and tested: EN1078Weight: From 430gBuy Leatt Protection from Chain Reaction Cycles, the World's Largest Online Bike Store.
Leatt Junior Body Protector 3DF AirFit LiteThe Junior Body Protector 3DF AirFit Lite offers a slim, light fit that protects the chest, back, elbows and shoulders. Made of the same 3DF AirFit impact foam as the 3DF AirFit Body Protector, the Lite version also has a soft, flexible construction but protects your body by hardening immediately upon impact.Scoring a total of 18 points in the Leatt protection system, it is CE tested and certified as impact protection. It will fit your body perfectly as the multi-layer impact foam is made of a sandwich-type lay-up that allows for movement between the layers, permitting easier bending and therefore better comfort. For added convenience, it is compatible with your neck brace and even offers additional upper-chest protection for non-neck brace users.Features:3DF AirFit ventilated soft impact foamCE tested and certified as impact protection: Chest: prEN1621-3 Level 1; Back: EN1621-2 Level 1; Shoulder: EN1621-1FFM-French Federation certifiedTotal Leatt® protection score of 18 pointsMulti-layer, perforated back and chest protectorsLighter, more comfortable and flexibleExtra upper-chest impact protection layer for non-neck brace usersAnti-odour MoistureCool and AirMesh wicking fabrics (uses zinc pyrithion)Elastic chest strap to give more secure protector positioningOur 3D design ensures a great fit that is very comfortableEasy-to-wear, zip-up compression sock design for maximum evaporationBraceOn™ neck brace fitting systemEasy to clean: hand washUnisex fitBuy Leatt from Chain Reaction Cycles, the World's Largest Online Bike Store.
Vitus Escarpe 275 SeatstayA high-quality and robust replacement seatstay to get your Vitus Escarpe back shredding the trails again.This is the perfect replacement seatstay for 2015, 2016 and 2017 Vitus Escarpe bikes with 142mm spacing. This genuine Vitus replacement part makes it ideal for replacing your existing seatstay. Features: Compatibility: Suitable as a replacement for 2015, 2016, 2017 Vitus Escarpes with 142mm spacing Genuine Vitus replacement partBuy Vitus Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.