In 1994 DT Swiss launched the original Hügi ratchet rear hub, a marvel of Swiss precision engineering that set new standards for reliability and quality in the industryDT's twin-ratchet 240 is now an established gold standard for lightweight and reliable rear hubs but time doesn't stand still and with 25 years of research, development and production experience behind them, it was time for DT Swiss's engineers to look again at the technology DT pioneered so many years agoThe result is the new generation of 240 hubs with Ratchet EXP, an even more refined and evolved ratchet system, by moving the drive-side hub bearing inside the inner 36 tooth ratchet itself, DT have decreased the number of moving parts whilst giving the bearings a wider stance,The result is a hub that is even more reliable and up to 20% lighter than the previous generation 240 and stiffer to boot with improved bearing alignment and long term durability, truly the finest hubs DT have ever made,The extensively machined hub shell, axle and end caps contribute to make these the lightest 240 hubs yet with no reduction in performance or long term durability,As with previous generations, the Ratchet EXP system is designed around a No-Tool system making servicing simple, further aided by new easy to remove, machined end caps,Custom made DT steel bearings offer the same near legendary long term durability and ease of replacement that the 240 has always been known for,Weights start at just 294 grams a pair.
Key Features: Genuine DT Swiss replacement part, Converts into 5 mm Q/R, Please refer to the DT Swiss Tech Book for a full chart of possible conversions for wheelsets and individual hubs.
The most refined, lightweight trail wheels on the market, featuring DT's highly evolved Ratchet EXP system, the XMC's are our most versatile carbon MTB wheel, as happy on a back country epic as they are between the tapes. Added shoulder material gives the XMC's enhanced impact protection and a higher weight limit over the XRC's but weights still stand at a super low 1,435 grams a pair in 27.5 inch and 1,529 grams in 29 inch.Key Features:100% bespoke hookless rim design with continuous strand lay-up, designed by DT, made by DT and tested to destruction by DT at their test lab in Biel, Switzerland, no open moulds here,The 180 hubs feature SiNC ceramic bearings and DT's cutting edge, Ratchet EXP system, an evolution of the original twin HÜgi ratchet, the ratchet EXP integrates the inner ratchet into the hub, allowing wider bearing spacing, fewer moving parts and more precise alignment,The resulting hubs are even more durable and reliable than our classic ratchet 240's but stiffer and significantly lighter with the fast rolling benefits of Ceramic bearings,A blend of DT's premium straight pull Aero Comp and Aerolite spokes offers an optimum blend of stiffness, comfort and low weight,Rear wheels include both Shimano MICRO SPLINE and SRAM XD freewheels for easy conversion,When bought as a pair they will include wheels bags, 6-bolt rotor adaptors, spoke tools, tubeless rim tape and tubeless valves,Maximum recommended system weight: 120 KG.
Push your boundaries with the rim brake ARC 1400, bleeding-edge Aero performance and DT's renowned quality in a privateer-friendly racing packageFor the first time the rim brake ARC's now incorporate DT's Ratchet EXP technology, with fewer moving parts, lower weight, improved reliability and lower bearing drag, the 240 EXP hubs offer the reliability and ease of servicing you've come to expect from DT in a super light racing hub that sets the standardThe bespoke rim profile's 17 mm internal width is optimised for 23-25c tyres and tubeless compatible, available in 80, 62 or 48 m deep options to suit any racing situation,Maximum recommended system weight: 100 KG,When bought as a pair they will include both Shimano and SRAM XDR freehubs, SwissStop brake pads, RWS skewers, rim tape and lightweight tubeless valves,Weight: 1738 grams a pair in 80mm, 1630 grams a pair in 62mm and 1573 grams a pair in 48 mm.
Tarmac, gravel, tow paths, tarmac again, cobbles, the Endurance Road wheel range is our most versatile wheel range, ideal for drop-bar bikes that see a wide variety of surfaces but still need to haul ass on the Sunday morning club run,The E 1800's sport a 20 mm internal width rim, optimised for 25- 35 mm tyres, making them able to cover a huge variety of roles as required,Need something Racier? check out our Performance and Aero Road lines, building a mixed surface or dedicated off road machine? have a look at the Cyclocross friendly Cross Road or super wide Gravel series,Simple and reliable 3-pawl rear freehub system with tool-free servicing,The combination of Aero Comp and super strong New Aero spokes are happy transferring the torque from even the beefiest of calves,For those looking to use the latest tyre tech the E 1800's come tubeless ready but can also be used with standard clinchers,The front wheel comes ready for 12 x 100 mm thru axles, the rear comes ready for 12 x 142 mm thru axles.,Adapters are available for QR front and rear (not included) and Front 15 x 100 (not included),When bought as a pair they will include 6-bolt rotor adaptors, tubeless rim tape and valves,Weight: Front 759 grams Rear: 896 grams,.
The perfect wheelset for those looking to push their aerobic threshold, not their wallets the X 1900 offers a lightweight XC package centered around DT's legendarily reliable ratchet freehub systemDT are the original ratchet hub innovators and over the past 20 years their Star Ratchet system has become the gold standard for reliability, simplicity and ease of servicing, now this industry-leading tech comes to the 1900 range to offer unparalleled quality in an entry level wheel,The X 432 sleeve-joined rims are stiffer and considerably wider than previous versions, offering a 25mm internal width for improved support for high volume tyres and letting you run lower pressures for better grip and handling,Hand built in Europe to the highest possible standards for long-term reliability and a tight, responsive ride feel,New all black spoke nipples and rim eyelets for a classy, understated and corrosion-resistant finish,The custom-designed straight pull centre lock hubs share many of the features found in DT's top-end wheelsets and offer load optimised spoke beds to ensure perfect alignment and maximum rigidity,As one of the few manufacturers of hubs, rims and spokes, the 1900's hubs and rims are designed from the ground up for DT's straight pull, Champion spokes,Weight: 1844 grams a pair, Maximum recommended system weight: 110 KG.
Specification: The ideal companion for big days out in the back of beyond; the XM 1700's combine DT's renowned XM 481 rims with the endlessly dependable yet lightweight 350 hubs to offer a optimum balance of low weight, impact resistance and long distance dependability, At the heart of the rear hub sits DT's Swiss-made 36-tooth SL ratchet, offering a 10 degree engagement angle; carefully balancing rapid engagement, low pedal kickback and long-term reliability, 30 mm internal width gives an ideal platform for current 2.3 - 2.5 inch trail tyres without adding unnecessary weight, DT's ability to design and manufacture rims in-house allows the use of custom alloys and bespoke rim extrusions, these combine with DT's unique PHR system nipples to give an overall strength and stiffness to weight ratio far in excess of standard alloy wheels, With a weight per pair of 1756 grams in 27.5" and just 1848 grams in 29" the XM 1700's durability still comes in at a respectably low weight, As one of the few manufactures of hubs, rims and spokes, the DT 1700's hubs and rims are designed from the ground up for DT's widely available straight pull, butted Competition spokes and designed as a system to offer superlative ride quality, 350 hubs offer assured excellent durability and wide freehub compatibility along with easy, tool-free servicing, Maximum recommended system weight: 120 KG.
Key Features:In 1994 DT Swiss launched the original Hügi ratchet rear hub, a marvel of Swiss precision engineering that set new standards for reliability and quality in the industry,DT's twin-ratchet 240 is now an established gold standard for lightweight and reliable rear hubs but time doesn't stand still and with 25 years of research, development and production experience behind them, it was time for DT Swiss's engineers to look again at the technology DT pioneered so many years ago,The result is the new generation of 240 hubs with Ratchet EXP, an even more refined and evolved ratchet system, by moving the drive-side hub bearing inside the inner 36 tooth ratchet itself, DT have decreased the number of moving parts whilst giving the bearings a wider stance,The result is a hub that is even more reliable and up to 20% lighter than the previous generation 240 and stiffer to boot with improved bearing alignment and long term durability, truly the finest hubs DT have ever made,The extensively machined hub shell, axle and end caps contribute to make these the lightest 240 hubs yet with no reduction in performance or long term durability,As with previous generations, the Ratchet EXP system is designed around a No-Tool system making servicing simple, further aided by new easy to remove, machined end caps,Custom made DT steel bearings offer the same near legendary long term durability and ease of replacement that the 240 has always been known for,Weights start at just 294 grams a pair.Specification:Brake Mounting6 Bolt,ColourBlack,Drilling32 Hole,Flange TypeClassic,FreehubSRAM XD,Product TypeRear Hubs.
Our finest UCI-Legal alloy tubeless Cyclocross race wheel,Following extensive feedback on our existing alloy and carbon models, the CR 1400 blends a bespoke 22 mm internal rim with our premium DICUT hub and spoke system to make these the lightest, most responsive alloy clincher Cyclocross or all-road wheels out there,The DICUT hub system gives the widest possible flange spacing for cornering stiffness and provides a rock solid anchor point for the unique high-tension DT Nail Head spokes, meaning these wheels have a class leading lateral stiffness to weight ratio,With a weight of just over 1600 grams the CR 1400's are 400-600 grams lighter than the stock OEM wheels that come on most CX bikes but still tough enough to be relied on with a bikepacking-friendly system weight limit of 130 KG,SBWT welded rim with a 22 mm internal diameter (26 mm external) makes these ideal for UCI-legal 33c race tyres,DT's legendarily reliable 240 hub internals and 36-tooth ratchet rear Freehub system makes these hubs solid under drive, lightweight and easy to service,DT have specced a blend of their renowned Aerolite and Aero Comp spokes for the perfect balance of stiffness, comfort and low weight,Tubeless ready of course! But you can also run standard clinchers,Weight: Rear: 872 grams.
The DT Spline 1 has long set the standard for premium alloy MTB wheels, their renowned mix of ride quality, reliability and exceptional strength to weight ratios have made them starting line favourites and test winners all around the world.. so what next?Following extensive lab-based and real world testing DT's engineering team in Biel decided that there was really only one place to go ... carbon!So the 3rd generation Spline 1 now sports a brand new bespoke 30 mm wide carbon rim design to push DT's signature wheel system to ever greater heights and even lower weights,The bruiser of the range, the EXC was developed in the white heat of the Enduro World Series and designed for high-impact riding where you need something that can take the hits but not weigh you down on the ride back up,At the very centre of this system are the new Ratchet EXP 240 hubs the simplest, most reliable and lightest 240 hubs DT have ever made proving that DT remain the undisputed masters of ratchet technology,Ratchet EXP reduces the number of moving parts inside the hub and allows a wider bearing spacing, improving overall stiffness whilst improving bearing life and reducing drag, the hub still retains DT's easy tool-free servicing and ability to be worked on trailside if required,Further weight is saved by the new Swiss-made Comp Race spokes that are butted down to 1.6 mm, making them not only lighter, but give a more forgiving and damped ride, offsetting the added stiffness the move to a carbon rim often brings, just another benefit of designing and manufacturing the entire wheel system in house,Maximum recommended system weight: 130 KG,Weight: 27.5 inch, Front: 760 grams Rear: 849 grams 29 inch, Front: 828 grams Rear: 917 grams.
The DT Swiss ER 1600 700c Disc Brake Rear Wheel is a heavy hitter, bike packers and wattage monsters assemble! With a 130 KG system weight limit the 32 mm deep ER 1600's are stiff, tough and ideal for anyone looking for a robust all round disc road wheelset at a reasonable price and weightThe ER 1600's premium SBWT welded rims are 20 mm wide internally, this makes them ideal for 25- 35 mm tyres and able to cover a huge variety of roles as required,Need something Racier? check out our Performance and Aero Road lines, building a mixed surface or dedicated off road machine? have a look at the Cyclocross friendly Cross Road or super wide Gravel series,DT's 350 hub internals are combined with a freshly optimised SPLINE hub-shell designed to improve spoke bracing and improve stiffness, the 350 18-tooth ratchet system is the most reliable out there, it can also be serviced without the need for specialist tools, making it ideal for back country epics,The combination of Aero Comp and super strong New Aero spokes are happy transferring the torque from even the beefiest of calves,For those looking to use the latest tyre tech the ER 1600's come tubeless ready but can also be used with standard clinchers,This rear wheel comes ready for 12 x 142 axles but can be converted by changing the end caps (additional end caps not included),Maximum recommended system weight: 130 KG,When bought as a pair they will include tubeless rim tape and valves,Weight: Rear: 952 grams.
Key Features:The RWS Plug In system allows the easy and quick removal of the RWS lever from your DT Swiss axles,This leaves a super clean look which is lightweight, aerodynamic and less likely to get snagged on things,When in place the lever is secured by a locking mechanism and will not fall off, so you can choose to ride with the levers on or off,If the lever is not to hand, the axle can be installed or removed using a standard 6 mm allen key,The lever can be moved or repositioned simply by lifting the lever away from the bike and positioning as required ensuring that it sits neatly against the bike,Safe and easy operation,Up to 50% more clamping force than conventional quick release systems,100% disc brake compatible,No plastic or synthetic parts in the force flow,Clamping force not influenced by heat build up,Available in road and mountain bike specific versions,Lever made from aluminium,Dimensions: Total Length: 163 mm, Threaded Section: 13 mm, Thread 12 x 1.5 mm.