Light in weight but not light in features. The new SingleTrack Helmet incorporates Koroyd® panels in high impact areas provide increased energy absorption. Incorporates the MIPS® Brain Protection System which is designed to reduce rotational motion transferred to the brain from angled impacts to the head. MIPS®MIPS® Brain Protection System which is designed to reduce rotational motion transferred to the brain from angled impacts to the head.Koroyd®3D formed Koroyd® inserts for enhanced airflow and improved energy absorption in an incredibly lightweight package. This creates the most breathable and lightweight helmets on the market while also providing superior impact protection over standard construction.AirflowAn MTB helmet that’s been designed with airflow in mind the large vents maintain a linear flow of air to maximise breathability and comfort.Helmet Crash Replacement SchemeIf you’re unfortunate enough to be involved in an accident that causes damage to your Endura helmet our Helmet Crash Replacement Scheme will reduce the cost of replacing your helmet with the same model or nearest model. Lightweight in-mould construction Koroyd panels in high impact areas provide increased energy absorption MIPS® Brain Protection System reducing multi-directional impacts Removable adjustable visor offering a wide range of movement Large vents including top ‘air intake’ zone provide increased airflow One-handed micro adjust fit system with multiple anchor points for wide range of adjustment Fast wicking quick dry soft touch removable padding Goggle friendly design with rear strap gripper Covered by Endura’s Crash Replacement Policy and Endura Product Guarantee Certified to CPSC and CE EN1078:2012 + A1:2012 Standards Construction Main Polystyrene 50% Polycarbonate 25% Polypropylene 15% Nylon 5% Polyester 5%
The most comfortable bibshorts we have ever made. That's the feedback that we have received from everyone who has ridden them so far. We started from scratch when re-designing our iconic top end bibshort. Our unique multi fabric construction has been engineered to be supportive and compressive where you need it whilst allowing for unrestricted movement. An impressive pre-shaped panel design delivers a true on bike specific fit that's immediately apparent when you put them on. ANATOMICAL DESIGN One of the keys to this bibshort's comfort is the lumbar support panel. This panel made from high powered Italian fabric wraps around your lower back and sides holding the bibshort firmly in place and taking some pressure off the straps giving them a barely there feel for even the longest of rides. PREMIUM LYCRA® FABRIC High quality Italian Lycra® has been used throughout treated with coldblack® technology that dramatically reduces heat build-up and providing UPF50 protection. 700 SERIES PAD Endura's 700 series pad available in the Pro SL Bibshort and Biblong has been developed through scientific testing in collaboration with bike fit experts gebioMized® and rider feedback from professional riders. Available in 3 widths this ground-breaking pad offers a semi-custom fit to match a rider's pelvic shape saddle and riding position. Endura's high tech Continuously Variable Profile technology provides supportive padding only where required with all superfluous material removed to minimise bunching and friction and maximise moisture transfer and flexibility. The high stretch fast wicking polyamide / Lycra® face fabric and multi-density open cell foam sandwich with flame lamination bonding provide outstanding stretch and moisture transfer while the 3D front mesh zone improves air circulation. High quality Italian power Lycra® fabric with coldblack® technology dramatically reducing heat buildup and providing UPF50 Updated 700 series pad with improved foam construction and a micro-polyester face fabric for unrivalled comfort. Computer cut “Continuously Variable Profile” (CVP) stretch technology with antibacterial finish and available in 3 pad width options Ergonomic pre-shaped multi panel construction New bib construction combining wide elastic straps and supportive high wicking rear panel High power lumbar support panel Raw edge hem bands with inner silicone print Long leg options (+4cm) also available (Product ID: 79561)
Please Note - This is the LONG LEG version of the Pro SL Bibshort 2020. If you require the standard leg length bibshorts please click here The most comfortable bibshorts we have ever made. Thats the feedback that we have received from everyone who has ridden them so far. We started from scratch when re-designing our iconic top end bibshort. Our unique multi fabric construction has been engineered to be supportive and compressive where you need it whilst allowing for unrestricted movement. An impressive pre-shaped panel design delivers a true on bike specific fit thats immediately apparent when you put them on. ANATOMICAL DESIGN One of the keys to this bibshort's comfort is the lumbar support panel. This panel made from high powered Italian fabric wraps around your lower back and sides holding the bibshort firmly in place and taking some pressure off the straps giving them a barely there feel for even the longest of rides. PREMIUM LYCRA® FABRIC High quality Italian Lycra® has been used throughout treated with coldblack® technology that dramatically reduces heat build-up and providing UPF50 protection. 700 SERIES PAD Endura's 700 series pad available in the Pro SL Bibshort and Biblong has been developed through scientific testing in collaboration with bike fit experts gebioMized® and rider feedback from professional riders. Available in 3 widths this ground-breaking pad offers a semi-custom fit to match a rider's pelvic shape saddle and riding position. Endura's high tech Continuously Variable Profile technology provides supportive padding only where required with all superfluous material removed to minimise bunching and friction and maximise moisture transfer and flexibility. The high stretch fast wicking polyamide / Lycra® face fabric and multi-density open cell foam sandwich with flame lamination bonding provide outstanding stretch and moisture transfer while the 3D front mesh zone improves air circulation. High quality Italian power Lycra® fabric with coldblack® technology dramatically reducing heat buildup and providing UPF50 Updated 700 series pad with improved foam construction and a micro-polyester face fabric for unrivalled comfort. Computer cut “Continuously Variable Profile” (CVP) stretch technology with antibacterial finish and available in 3 pad width options Ergonomic pre-shaped multi panel construction New bib construction combining wide elastic straps and supportive high wicking rear panel High power lumbar support panel Raw edge hem bands with inner silicone print
While we can dream of mountain biking in perfect sunny weather all the time, the reality is often different. The Endura Women's MT500 Spray Baggy MTB Trousers II are a brilliant choice for much of your mountain biking when the weather is a little bit un-predictable. While they’re nice and light, they’re also durable too, and with four-way stretch front panels, they are also nicely flexible to make manoeuvring your bike effortless. Should you come across muddy trails or a rain shower passes through, the combination of a Durable Water Repellent finish and three-layer waterproof and taped rear seat panels keep you comfortable and protected from the worst of the weather. The crotch panel is also seamless for greater on-the-saddle comfort. Speaking of which, the Spray Trousers are Clickfast™ liner compatible, making it easy to add an Endura padded liner (not supplied) to add comfort to your ride. A stretch waistband additionally provides a snug fit and Velcro® adjusters let you get the non-slip fit just right. To the thighs you’ll find zipped vents, letting you regulate temperature. The ankles are treated to abrasion-resistant zones, preventing damage from the chain and crank arms. And with two zipped hand pockets, you’ve space for keeping essentials close at hand. Any season, any weather, it’s always a good time to go mountain biking with your Women's MT500 Spray Trousers on.
The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts. This junction A is required to connect the shifters via E-tube wires to the down tube junction wire, 5 Port design specifically for TT setup and 3 port design specifically for drop handlebars.
With Di2 technology shifting is easy and precise - just a light touch, as soft as a mouse click, is sufficient for the front or rear derailleur to instantaneously select the correct gear. The removal of traditional mechanical cables in favour of electrical wires eliminates poor shifting caused by contaminates, corrosion and stretching, and also provides effortless gear shifts.Simply pressing tactile buttons allows effortless and comfortable shifting even when your hands are cold, sprinter single button shift switches are used to operate the rear derailleur with a tap of the thumb whilst in the drops, one shifter up , one shifter down.Can only be used in conjunction with ST-9070 drop bar STI shiftersShift switches are supplied with 130 mm E-tube electrical cables installedWeight: 10g (pair)
Taking your head protection to the next level, the MT500 MIPS Helmet combines a host of features to make your mountain biking safer and give you the confidence to take on ever more challenging terrain. Starting with the in-mould construction, this combines a tough and durable outer with a shock-absorbing foam inner. This keeps your head protected when you push your limits a bit too far and hit the ground. Koroyd Technology Engineered Protection The MT500 also features Koroyd protection. Thousands of co-polymer extruded tubes are thermally welded to create a consistent and fully engineered energy absorption system. These cores plastically deform for higher speed impacts, absorbing energy linearly. Up to 84% of the material thickness can be utilised in case of an accident. Existing energy absorbers densify around 60%. MIPS (Multi-directional Impact Protection System) The Mips system is designed to provide added safety for helmets in many accidents. For certain impacts, the Mips system can reduce harmful rotational motion that might otherwise be transferred to the user’s head. Rotational motion is a common cause of concussions in oblique hits to the head. In a crash, the Mips system is designed to move slightly inside the helmet to help redirect forces away from the head. Shop All MIPS Helmets Click Here Cool and Comfortable As well as keeping your head safe, the MT500 is comfortable too. The adjustment system is quick and easy to use via a rear dial, ensuring you always get a good fit. After all, a good-fitting helmet is a safer more comfortable helmet. Inside, you'll also find quick-wicking and quick-drying pads. These make sure a tough pedal upwards won't leave your brow soaked in sweat. Airflow is also optimised for cool comfort. Large vents, including an upper 'air intake' zone, keep fresh air circulating and allow damp air to escape. Front vets also act as a sunglasses dock. And if you prefer wearing goggles, then a rear gripper will keep your goggle strap firmly in place over any terrain. An adjustable visor completes the awesome trail-ready package.
Bikes have changed the way people travel countless times over the past 200 years and with the current emphasis on fossil fuel free travel they are doing so yet again. Endura's Speed Pedelec Helmet is designed to meet the demands of the modern speed pedelec commuter and recreational cyclist. NTA8776 S-EPAC Speed Pedelec CertificationIn addition to CE standard EN1078 certification the Speed Pedelec Helmet also meets the NTA8776 S-EPAC certification offering greater levels of impact protection and head coverage for these higher speed classification e-bikes with a maximum speed of 28mph (45kph). The full Koroyd core ensures additional protection but doesn’t mean extra weight. The helmet also includes a host of neat features including an adjustable visor open/close venting and rear light mount to create the ultimate city lid. Lightweight in-mould construction with extended skull coverage Full integrated Koroyd® core for superior energy absorption Removable visor provides integrated eye protection Controlled airflow cooling with easy open front vent system and top “air intake” vent One-hand micro-adjustment fit system Antibacterial fast wicking fabric padding Covered by Endura’s Crash Replacement Policy Certified to CE standard EN1078 and new NTA8776 Speed-Pedelec #ChooseLifeChooseBike
Junior Full Face Protection For Serious Mini Rippers. Lightweight in-mould construction Large vents for increased airflow One-handed micro adjust fit system with multiple anchor points for wide range of adjustment Fast wicking quick dry soft touch removable padding Goggle friendly design with rear strap gripper Covered by Endura’s Crash Replacement Policy and Endura Product Guarantee Certified to CE Standard EN1078:2012 + 1 A1:2012 CPSC & ASTM F1952 Construction Main Polystyrene 50% Polycarbonate 25% Polypropylene 15% Nylon 5% Polyester 5%
Endura MT500 MIPS HelmetCombining two leading head protection systems, MIPS and Koroyd, the Endura MT500 MIPS Helmet gives you unrivalled head protection for when you're slaying mountain bike trails. Taking your head protection to the next level, the MT500 MIPS Helmet combines a host of features to make your mountain biking safer and give you the confidence to take on ever more challenging terrain. Starting with the in-mould construction, this combines a tough and durable outer with a shock-absorbing foam inner. This keeps your head protected when you push your limits a bit too far and hit the ground. Koroyd Technology Engineered ProtectionThe MT500 also features Koroyd protection. Thousands of co-polymer extruded tubes are thermally welded to create a consistent and fully engineered energy absorption system. These cores plastically deform for higher speed impacts, absorbing energy linearly. Up to 84% of the material thickness can be utilised in case of an accident. Existing energy absorbers densify around 60%. MIPS (Multi-directional Impact Protection System) The Mips system is designed to provide added safety for helmets in many accidents. For certain impacts, the Mips system can reduce harmful rotational motion that might otherwise be transferred to the user’s head.Rotational motion is a common cause of concussions in oblique hits to the head. In a crash, the Mips system is designed to move slightly inside the helmet to help redirect forces away from the head.Cool and ComfortableAs well as keeping your head safe, the MT500 is comfortable too. The adjustment system is quick and easy to use via a rear dial, ensuring you always get a good fit. After all, a good-fitting helmet is a safer more comfortable helmet. Inside, you'll also find quick-wicking and quick-drying pads. These make sure a tough pedal upwards won't leave your brow soaked in sweat.Airflow is also optimised for cool comfort. Large vents, including an upper 'air intake' zone, keep fresh air circulating and allow damp air to escape. Front vets also act as a sunglasses dock. And if you prefer wearing goggles, then a rear gripper will keep your goggle strap firmly in place over any terrain. An adjustable visor completes the awesome trail-ready package.Features:Lightweight in-mould construction; Full Koroyd core provides increased energy absorptionMIPS® Brain Protection System reducing multi-directional impactsRemovable, adjustable visor offering a wide range of movementLarge vents including top ‘air intake’ zone provide increased airflowFast wicking, quick-dry, soft-touch, removable paddingA one-handed micro-adjust fit system, integrated into MIPS layerGoggle-friendly design with rear strap gripper and front vents act as sunglasses “dock”Clip-on accessory mount, accessory clip and light mount includedCertified to CPSC and CE EN1078:2012 + A1:2012 StandardsShop all MIPS helmets - Click hereBuy Endura Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.
Endura SingleTrack MTB Jacket IIMuddy trails. Stormy wet-weather. The ideal time for some mountain bike fun. And the waterproof Endura SingleTrack MTB Jacket II makes sure you'll be riding in comfort, despite the wild weather. It's thanks to the 3-layer ExoShell20™ waterproof fabric that the SingleTrack MTB Jacket II does such a great job of keeping you dry when conditions turn wet and muddy. Its 10,000mm waterproof rating means you stay drier for longer. Which means more fun time on the trails. But excellent breathability also maintains comfort even when working up a sweat on steep and technical climbs. Despite the weather, there may come a point when some fresh air is welcome. And here the underarm vents let you easily regulate airflow to the inside and thus control body temperature. However, if the weather turns particularly nasty, pull up the hood for extra protection. Lastly, reflective trims make you easy to spot at night, lit up when caught in the light of your night-riding buddies headlamps. ExoShell20™ ECO 3 fabricA soft, noise-free outer fabric is faced with a super-fine denier tricot inner layer to give outstanding comfort against the skin. Sandwiched between the outer and inner is a thin PU membrane, giving a 10,000mm waterproof rating to keep the rain out, while 20,000g/m2/24hr breathability ensures you remain sweat-free as you build body heat. Features:Materials: 80% Recycled Polyester, 20% PolyesterWaterproof and breathable ExoShell20TM ECO 3 layer fabricContains 80% recycled fabric with PFC-Free, non-toxic durable water repellent finishWater repellent front zip with storm flapGrown on hood with front adjustmentWater repellent zips on centre front and chest pocketPits vents for temperature regulationReflective trims on hood, cuff and rear tailWaterproof- 10000 mm / Breathable - 20000g/m2/24hrBuy Endura Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Endura SingleTrack MTB Jacket IIMuddy trails. Stormy wet-weather. The ideal time for some mountain bike fun. And the waterproof Endura SingleTrack MTB Jacket II makes sure you'll be riding in comfort, despite the wild weather. It's thanks to the 3-layer ExoShell20™ waterproof fabric that the SingleTrack MTB Jacket II does such a great job of keeping you dry when conditions turn wet and muddy. Its 10,000mm waterproof rating means you stay drier for longer. Which means more fun time on the trails. But excellent breathability also maintains comfort even when working up a sweat on steep and technical climbs. Despite the weather, there may come a point when some fresh air is welcome. And here the underarm vents let you easily regulate airflow to the inside and thus control body temperature. However, if the weather turns particularly nasty, pull up the hood for extra protection. Lastly, reflective trims make you easy to spot at night, lit up when caught in the light of your night-riding buddies headlamps. ExoShell20™ ECO 3 fabricA soft, noise-free outer fabric is faced with a super-fine denier tricot inner layer to give outstanding comfort against the skin. Sandwiched between the outer and inner is a thin PU membrane, giving a 10,000mm waterproof rating to keep the rain out, while 20,000g/m2/24hr breathability ensures you remain sweat-free as you build body heat. Features:Materials: 80% Recycled Polyester, 20% PolyesterWaterproof and breathable ExoShell20TM ECO 3 layer fabricContains 80% recycled fabric with PFC-Free, non-toxic durable water repellent finishWater repellent front zip with storm flapGrown on hood with front adjustmentWater repellent zips on centre front and chest pocketPits vents for temperature regulationReflective trims on hood, cuff and rear tailWaterproof- 10000 mm / Breathable - 20000g/m2/24hrBuy Endura Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.