This dropper post lever is specifically designed for use with Magura brakes. It features a hard-wearing 6061 T6 aluminium construction, which makes it tough and dependable as you charge from trail to trail. Ergonomic and easy to install, this dropper lever makes it easy to change your seatpost positioning without having to stop your ride. Its sealed cartridge bearings and textured lever also make it a perfect choice for smooth and consistent operation in all weather and terrain conditions. Solve common dropper remote complaints with the compact, ergonomic and sturdy ReMote dropper lever. Beginning with a long list of rider and mechanic requests, the Wolf Tooth team set out to address each and every one. From its hassle-free installation, to smooth ball bearing action, to the engineered failure point, the lightweight ReMote leads in every category. Technologies: UpFront cable fixing: The dropper cable is attached at the lever, making setup and adjustment quick and easy. Simply secure cable at seatpost using stock barrel or cable clamp and route to bar for a significant reduction in installation time and frustration. Large-diameter ball-bearing pivot: An industry first, the ReMote uses a massive 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. Cable-kind clamp: A precision-machined cable path and custom clamping screw with captive washer won’t damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing. Low-profile lever: The ReMote lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals. Integrated cable adjustment: The ReMote solidly-mounted barrel adjuster makes on-the-fly adjustments quick and easy while eliminating the rattles caused by common inline cable adjusters. Breakaway axle pivot: Crashes are bad, but expensive crashes are worse. That’s why the ReMote features an engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available from Wolf Tooth. High-traction lever: A machined surface ensures that control is not lost, even in the worst of conditions. Broad compatibility: The ReMote has been tested and is recommended for use with many cable-actuated dropper posts. See the compatibility section below for details. Made in the USA: Wherever the capabilities exist, Wolf Tooth is committed to domestic manufacturing. From lever to packaging, 65% or more of each ReMote is made in the USA. Manufacturer's Part Number: WTREMOTEMAGURA
This remote dropper lever has a longer lever arm than the standard ReMote version, which allows it to reduce the actuation force required by a third and makes it perfect for dropper posts with a harder pull or if you prefer a light actuation feel. These limited edition anodised colourways add extra flair to your ride. Every single detail of the ReMote Light Action is the result of a singular drive to eliminate all complaints found with stock dropper levers. In an industry first, the ReMote uses a 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. A precision-machined cable path and custom clamping screw with captive washer won’t damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing. The ReMote lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals. Wolf Tooth's team have also included an innovative engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available, ensuring that you can spend more time on the trails and less time in the workshop. Compatibility Compatible with all cable-actuated dropper posts. Works with dropper posts that (a) have the barrel end of the cable at the remote position and (b) those that have the barrel end at the seat post. Wolf Tooth recommends measuring the pivot centre to end of your current lever. If it is greater than 52mm the Light Action will work best. If it is less than 52mm, the Standard ReMote will work best. Mounting Types ReMote 22.2mm - includes hinged handlebar clamp for 22.2mm handlebars. All mountain bike handlebars are 22.2mm where your shift and brake levers attach even on 31.8mm handlebars. (31.8mm and 35mm handlebars just refer to the diameter where the stem clamps). Attach with 1-2nm max. Manufacturer's Part Numbers: WTREMOTELACLMPBLU Blue 22.2mm WTREMOTELACLMPGLD Gold 22.2mm WTREMOTELACLMPORG Orange Size 22.2mm WTREMOTELACLMPPRP Purple Size 22.2mm WTREMOTELACLMPRED Red Size 22.2mm WTREMOTELACLMPNI Silver Size 22.2mm
Designed for the rigours of today's mountain bike (MTB) trail riding disciplines, this dropper post lever is fully-equipped for wherever your next adventure takes you. It includes a hinged handlebar clamp for 22.2mm handlebars, allowing you to easily install it and enjoy quick and intuitive operation. All mountain bike handlebars are 22.2mm where your shift and brake levers attach, even on 31.8mm handlebars. (31.8mm and 35mm handlebars just refer to the diameter where the stem clamps). Attach with 1-2nm max. Solve common dropper remote complaints with the compact, ergonomic and sturdy ReMote dropper lever. Beginning with a long list of rider and mechanic requests, the Wolf Tooth team set out to address each and every one. From its hassle-free installation, to smooth ball bearing action, to the engineered failure point, the lightweight ReMote leads in every category. UpFront cable fixing: The dropper cable is attached at the lever, making setup and adjustment quick and easy. Simply secure cable at seatpost using stock barrel or cable clamp and route to bar for a significant reduction in installation time and frustration. Large-diameter ball-bearing pivot: An industry first, the ReMote uses a massive 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. Cable-kind clamp: A precision-machined cable path and custom clamping screw with captive washer won’t damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing. Low-profile lever: The ReMote lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals. Integrated cable adjustment: The ReMote solidly-mounted barrel adjuster makes on-the-fly adjustments quick and easy while eliminating the rattles caused by common inline cable adjusters. Breakaway axle pivot: Crashes are bad, but expensive crashes are worse. That’s why the ReMote features an engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available from Wolf Tooth. High-traction lever: A machined surface ensures that control is not lost, even in the worst of conditions. Broad compatibility: The ReMote has been tested and is recommended for use with many cable-actuated dropper posts. See the compatibility section below for details. Made in the USA: Wherever the capabilities exist, Wolf Tooth is committed to domestic manufacturing. From lever to packaging, 65% or more of each ReMote is made in the USA. Manufacturer's Part Number: WTREMOTECLMP Black 22.2mm
Wolf Tooth ReMote Dropper Lever for Matchmaker XCompatible with SRAM Matchmaker X brake levers to give you a clean look on your bars, this universal dropper seatpost remote lever works with all mechanical-type droppers and brings you fast, accurate and smooth control of your saddle height. Made by Wolf Tooth from a tough 6061 T6 aluminium, it’s ready for aggressive use as you drop your saddle out of the way for wild descents and raise it back up for more attacking the climbs more efficiently.Low-Profile Dropper LeverEasy to use, this tough component is kitted out with a low-profile lever which sits close to your handlebar. This minimises the gap between your bar and your thumb for superior control that feels like a natural extension of one of your limbs. Also, to reduce the likelihood of knee contact in technical terrain sections, it offers more space around your bars to overcome challenging riding situations.Integrated Cable AdjustmentEquipped with a barrel adjuster, this top-quality component allows you to make on-the-fly changes quick and easy. This eliminates the rattles caused by common inline cable adjusters for a cleaner and more reliable rider-tuned set-up.Features: Body Material: 6061 T6 Aluminium Axle Material: Delrin Use: Mountain Bike (MTB) Clamp Compatibility: SRAM Matchmaker X Weight: 38.5g (approx.) Please Note: As this model is designed to combine with your SRAM Matchmaker X compatible brakes, it does not come with its own round handlebar clamp.Technologies: UpFront Cable Fixing: The dropper cable is attached at the lever, making setup and adjustment quick and easy. Simply secure cable at seatpost using stock barrel or cable clamp and route to bar for a significant reduction in installation time and frustration Large Diameter Ball-Bearing Pivot: An industry first, the ReMote LA uses a massive 21mm sealed cartridge bearing for smooth operation and unparalleled modulation Cable-Kind Clamp: A precision-machined cable path and custom clamping screw with captive washer won't damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing Low-Profile, Light Action lever: The ReMote LA (light action) lever sits close to the bar, minimising the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals Integrated Cable Adjustment: The ReMote LA's barrel adjuster makes on-the-fly adjustments quick and easy while eliminating the rattles caused by common inline cable adjusters Breakaway Axle Pivot: Crashes are bad, but expensive crashes are worse. That's why the ReMote features an engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available here High-traction Lever: A machined surface ensures that control is not lost- even in the worst of conditions Made in the USA: Wherever the capabilities exist, Wolf Tooth is committed to domestic manufacturing. From lever to packaging, 65% or more of each ReMote is made in the USABuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Hope Light Action Remote Dropper LeverThis mountain bike dropper seat post lever is engineered to make operation as simple as possible on your off-road adventures. Specifically designed for use with Hope cable-actuated dropper posts, this Light Action model has a longer lever arm when compared to Wolf Tooth's standard ReMote model. As a result, the actuation force is reduced by a third and riders can enjoy a lighter and smoother feel.Beginning with a long list of rider and mechanic requests, the Wolf Tooth team set out to address each and every one. Based on rider feedback and tailored to work with some posts' stiffer internal springs, the ReMote LA is also the choice of those with thumb injuries or reduced hand strength. From its hassle-free installation to smooth ball bearing action to engineered failure point, the lightweight ReMote leads in every category. CompatibilityReMote for Hope is only compatible Tech 3 brakes. There are two generations of Hope Tech 3 brakes. Wolf Tooth's ReMote is designed to work with the early model of the Tech 3 brake levers. The newer model of the Tech 3 brakes has a threaded hole and will require some modifications to the ReMote base. Features: Material: 6061 T6 Aluminium with Delrin axle Use: MTB Compatibility: Hope cable actuated dropper seat postsType: Light Action remoteLever Length: 57.1mm Made in the USAWeight: 36gTechnologies: Up Front Cable Fixing: The dropper cable is attached at the lever, making setup and adjustment quick and easy. Simply secure cable at seatpost using stock barrel or cable clamp and route to bar for a significant reduction in installation time and frustration. Large Diameter Ball-Bearing Pivot: An industry first, the ReMote LA uses a massive 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. Cable-Kind Clamp: A precision-machined cable path and custom clamping screw with captive washer won't damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing.Low-Profile, Light Action lever: The ReMote LA lever sits close to the bar, minimising the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals.Integrated Cable Adjustment: The ReMote LA's solidly-mounted barrel adjuster makes on-the-fly adjustments quick and easy while eliminating the rattles caused by common inline cable adjusters.Breakaway Axle Pivot: Crashes are bad, but expensive crashes are worse. That's why the ReMote features an engineered failure point, allowing the lever to break away from its base in the event of a crash.High-Traction Lever: A machined surface ensures that control is not lost- even in the worst of conditions.Made in the USA: Wherever the capabilities exist, Wolf Tooth is committed to domestic manufacturing. From lever to packaging, 65% or more of each ReMote is made in the USA.Buy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Shimano Light Action Dropper LeverThis remote dropper lever solves many of the common problems associated with dropper remotes thanks to its compact, ergonomic and sturdy design. It features a hard-wearing aluminium construction with a Delrin axle, making it more than capable of handling all the abuse that's associated with long days in the saddle. Its patent-pending ReMote LA has a longer lever arm than the standard ReMote and is ideal for dropper posts with a harder pull or for riders that just prefer a really light actuation feel. It reduces the force to actuate a dropper by nearly a third of the standard ReMote.Beginning with a long list of rider and mechanic requests, the Wolf Tooth team set out to address each and every one. Based on rider feedback and tailored to work with some posts' stiffer internal springs, the ReMote LA is also the choice of those with thumb injuries or reduced hand strength. From its hassle-free installation to smooth ball bearing action to engineered failure point, the lightweight ReMote leads in every category.CompatibilityCompatible with all cable-actuated dropper posts. Works with dropper posts that have the barrel end of the cable at the remote and those that have the barrel end at the post. Measure the pivot centre to end of your current lever. If it is greater than 52mm the Light Action will work best. If it is less than 52mm, the Standard ReMote will work best.Mounting TypesReMote IS-AB for Shimano I-Spec A or B - Includes IS-AB hardware. ReMote IS-EV for Shimano I-Spec EV - Includes IS-EV hardware. ReMote IS-II for Shimano I-Spec II - Includes IS-II hardwareFeatures: Material: 6061 T6 Aluminium with Delrin axle Use: MTB Made in the USA Single or Pair: Single Weight: Shimano IS-AB: 36g; Shimano IS-II: 35g; Shimano IS-EV: 35gTechnologies: UpFront Cable Fixing: The dropper cable is attached at the lever, making setup and adjustment quick and easy. Simply secure cable at seatpost using stock barrel or cable clamp and route to bar for a significant reduction in installation time and frustration. Large Diameter Ball-Bearing Pivot: An industry first, the ReMote LA uses a massive 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. Cable-Kind Clamp: A precision-machined cable path and custom clamping screw with captive washer won't damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing. Low-Profile, Light Action Lever: The ReMote LA lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals. Integrated Cable Adjustment: The ReMote LA's solidly-mounted barrel adjuster makes on-the-fly adjustments quick and easy while eliminating the rattles caused by common inline cable adjusters. Breakaway Axle Pivot: Crashes are bad, but expensive crashes are worse. That's why the ReMote features an engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available. High-Traction Lever: A machined surface ensures that control is not lost- even in the worst of conditions. Broad Compatibility: The ReMote LA has been tested and is recommended for use with Thomson, Fox Transfer, Race Face, Easton, and 9point8 cable-actuated dropper posts. Made in the USA: Wherever the capabilities exist, Wolf Tooth is committed to domestic manufacturing. From lever to packaging, 65% or more of each ReMote is made in the USA.Manufacturer's Part Numbers: WTREMOTELAISAB Black Option 1 IS-AB WTREMOTELAISEV Black Option 2 IS-EV WTREMOTELAISII Black Option 3 IS-II Buy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Light Action Ltd Edition Dropper LeverFeaturing a longer lever arm than the standard ReMote version, this remote dropper lever reduces the actuation force required by a third and makes it ideal for dropper posts with a harder pull or if you prefer a light actuation feel. These limited edition anodised colourways add extra flair to your ride.Every single detail of the ReMote Light Action is the result of a singular drive to eliminate all complaints found with stock dropper levers.In an industry first, the ReMote uses a 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. A precision-machined cable path and custom clamping screw with captive washer won't damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing.The ReMote lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals.Wolf Tooth's team have also included an innovative engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available, ensuring that you can spend more time on the trails and less time in the workshop.Features: Finish: Limited edition anodised Dropper Post Compatibility: All-cable actuated dropper posts (see compatibility for more info) Clamp Diameter: 22.2mmTechnologies: Compatibility: Compatible with all cable-actuated dropper posts. Works with dropper posts that (a) have the barrel end of the cable at the remote position and (b) those that have the barrel end at the seat post. Wolf Tooth recommends measuring the pivot centre to end of your current lever. If it is greater than 52mm the Light Action will work best. If it is less than 52mm, the Standard ReMote will work best. Mounting Types: ReMote 22.2mm - includes hinged handlebar clamp for 22.2mm handlebars. All mountain bike handlebars are 22.2mm where your shift and brake levers attach even on 31.8mm handlebars. (31.8mm and 35mm handlebars just refer to the diameter where the stem clamps). Attach with 1-2nm max.Manufacturer's Part Numbers: WTREMOTELACLMPBLU Blue 22.2mm WTREMOTELACLMPGLD Gold 22.2mm WTREMOTELACLMPORG Orange Size 22.2mm WTREMOTELACLMPPRP Purple Size 22.2mm WTREMOTELACLMPRED Red Size 22.2mm WTREMOTELACLMPNI Silver Size 22.2mmBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Light Action Ltd Edition Dropper LeverFeaturing a longer lever arm than the standard ReMote version, this remote dropper lever reduces the actuation force required by a third and makes it ideal for dropper posts with a harder pull or if you prefer a light actuation feel. These limited edition anodised colourways add extra flair to your ride.Every single detail of the ReMote Light Action is the result of a singular drive to eliminate all complaints found with stock dropper levers.In an industry first, the ReMote uses a 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. A precision-machined cable path and custom clamping screw with captive washer won't damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing.The ReMote lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals.Wolf Tooth's team have also included an innovative engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available, ensuring that you can spend more time on the trails and less time in the workshop.Features: Finish: Limited edition anodised Dropper Post Compatibility: All-cable actuated dropper posts (see compatibility for more info) Clamp Diameter: 22.2mmTechnologies: Compatibility: Compatible with all cable-actuated dropper posts. Works with dropper posts that (a) have the barrel end of the cable at the remote position and (b) those that have the barrel end at the seat post. Wolf Tooth recommends measuring the pivot centre to end of your current lever. If it is greater than 52mm the Light Action will work best. If it is less than 52mm, the Standard ReMote will work best. Mounting Types: ReMote 22.2mm - includes hinged handlebar clamp for 22.2mm handlebars. All mountain bike handlebars are 22.2mm where your shift and brake levers attach even on 31.8mm handlebars. (31.8mm and 35mm handlebars just refer to the diameter where the stem clamps). Attach with 1-2nm max.Manufacturer's Part Numbers: WTREMOTELACLMPBLU Blue 22.2mm WTREMOTELACLMPGLD Gold 22.2mm WTREMOTELACLMPORG Orange Size 22.2mm WTREMOTELACLMPPRP Purple Size 22.2mm WTREMOTELACLMPRED Red Size 22.2mm WTREMOTELACLMPNI Silver Size 22.2mmBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Limited Edition Remote Dropper LeverUtilising sealed cartridge bearings for a silky-smooth action and a low profile, this textured lever is machined to the highest quality. Compatible with all cable-actuated dropper posts, the ReMote Dropper Lever is simple to install, maintain and has been built to last. Every single detail of the ReMote is the result of a singular drive to eliminate all complaints found with stock dropper levers.In an industry first, the ReMote uses a 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. A precision-machined cable path and custom clamping screw with captive washer won't damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing.The ReMote lever sits close to the bar, minimising the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals.Wolf Tooth's team have also included an innovative engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available, ensuring that you can spend more time on the trails and less time in the workshop.Features: Use: MTB Dropper Post Compatibility: All cable-actuated dropper posts (see compatibility for more info) Clamp Diameter: 22.2mmTechnologies: Mounting Types: ReMote 22.2mm - includes hinged handlebar clamp for 22.2mm handlebars. All mountain bike handlebars are 22.2mm where your shift and brake levers attach even on 31.8mm handlebars. (31.8mm and 35mm handlebars just refer to the diameter where the stem clamps). Attach with 1-2nm max. Compatibility: Compatible with all cable actuated dropper posts. Works with dropper posts that (a) have the barrel end of the cable at the remote position and (b) those that have the barrel end at the seat post. If your post is not listed in the charts found in the image gallery, Wolf Tooth recommends measuring the pivot centre to end of your current lever. If it is greater than 52mm the Light Action will work best. If it is less than 52mm, the Standard ReMote will work best. Manufacturer's Part Numbers: WTREMOTECLMPBLU Blue Blue One Size 22.2mm WTREMOTECLMPPRP Purple Purple One Size 22.2mm WTREMOTECLMPRED Red Red One Size 22.2mm WTREMOTECLMPNI Silver Nickel One Size 22.2mmBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Limited Edition Remote Dropper LeverUtilising sealed cartridge bearings for a silky-smooth action and a low profile, this textured lever is machined to the highest quality. Compatible with all cable-actuated dropper posts, the ReMote Dropper Lever is simple to install, maintain and has been built to last. Every single detail of the ReMote is the result of a singular drive to eliminate all complaints found with stock dropper levers.In an industry first, the ReMote uses a 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. A precision-machined cable path and custom clamping screw with captive washer won't damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing.The ReMote lever sits close to the bar, minimising the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals.Wolf Tooth's team have also included an innovative engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available, ensuring that you can spend more time on the trails and less time in the workshop.Features: Use: MTB Dropper Post Compatibility: All cable-actuated dropper posts (see compatibility for more info) Clamp Diameter: 22.2mmTechnologies: Mounting Types: ReMote 22.2mm - includes hinged handlebar clamp for 22.2mm handlebars. All mountain bike handlebars are 22.2mm where your shift and brake levers attach even on 31.8mm handlebars. (31.8mm and 35mm handlebars just refer to the diameter where the stem clamps). Attach with 1-2nm max. Compatibility: Compatible with all cable actuated dropper posts. Works with dropper posts that (a) have the barrel end of the cable at the remote position and (b) those that have the barrel end at the seat post. If your post is not listed in the charts found in the image gallery, Wolf Tooth recommends measuring the pivot centre to end of your current lever. If it is greater than 52mm the Light Action will work best. If it is less than 52mm, the Standard ReMote will work best. Manufacturer's Part Numbers: WTREMOTECLMPBLU Blue Blue One Size 22.2mm WTREMOTECLMPPRP Purple Purple One Size 22.2mm WTREMOTECLMPRED Red Red One Size 22.2mm WTREMOTECLMPNI Silver Nickel One Size 22.2mmBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Dropper Remote Clamp Conversion KitThe Wolf Tooth Remote Clamp Conversion Kit attaches to bars with a 22.2mm diameter. Featuring delrin and aluminium parts, this kit offers durable and reliable performance alongside your Wolf Tooth ReMote dropper lever (available separately).Features: Material: Delrin and Aluminium Use: MTB Diameter: 22.2mm Type: 22.2mm Flat bar clamp conversion kit Compatibility: Wolf Tooth ReMote seat postTechnologies: Cable clamping bolt is a M4 x 6mm socket head cap screw with an M4 flat washer. Delrin and aluminium parts. For 22.2mm handlebar clamps, attach with 1 NM max (it does not take much!).Manufacturer's Part Number: WTCLMP22KIT Black 22.2mmBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Hope Dropper Remote Clamp Conversion KitThis kit is specifically designed for use with Hope brakes. By attaching the dropper level to a brake caliper, this gives the advantage of minimising components on the handlebars, creating a more compact set up. This also means that the dropper lever will be in closer proximity to the handlebar grip, making it easier to use whilst on the fly.Wolf Tooth always sets out to provide solutions for as many set ups and different equipment options as possible.Features: Compatibility: Hope brakes Manufacturer's Part Number: WTHOPECONVKITBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.