BikeYoke Devine Dropper SeatpostIf you're looking for a reliable dropper with brilliant ergonomics and function, a superb finish quality, low weight and travel reduction, you can finally stop searching, as the BikeYoke Devine Dropper Seatpost does all this and more.The DIVINE is the stablemate to the class leading Bike Yoke Revive. With a solid, measured action, it gives you the same build quality for a cheaper price-point, and further allows reduction of maximum extension (and drop) so you can get the most of the available travel without the need to opt for the shorter version. If the standard drop is slightly too long for you, you can just reduce it if you need to. The new auto-reset function will bleed your post with every full drop, so you won't have to worry about a squishy post anymore.Auto-Reset-Function: Every full drop automatically bleeds the hydraulic circuit for suspension-free lock-outReducible maximum travel: If you need a slightly shorter post or just prefer a little less travel, the maximum extension can be reduced in 5mm increments, using the included clip-on extension/travel spacerRotatable bottom part: In order to get maximum insertion into the frame, the foot can be rotated by hand to avoid interference with one-sided bearings or dents inside the frame´s seat tubeFully user-serviceable - all spare parts are available for end-consumersFeatures: Material: Aluminium Diameter: 31.8mm Travel: 160mm Remote not includedBuy BikeYoke Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Ascend II XL externally routed dropper seatpost offers 170mm of travel. Ideal for taller riders or for those who like the added height adjustment, the Ascend II XL is available in both 30.9 and 31.6 seatpost diameters.AL6061-T6 AluminiumBar mounted remote lever and cable operated external routingLinkage mechanism eliminates any outer cable pullZero Offset one-piece head/ upper shaft with micro adjust clamping mechanismDiameter: 30.9mm or 31.6mmLength: 489mm (shaft is 264mm), Travel: 170mmCable Length: 1.5mFinish: Sand Blasted and Hard Anodised Black2 Year WarrantyWeight: 670g (31.6mm without cable/lever)Building on the success of the original Ascend, Brand- X now offer a long drop externally routed option with the Ascend II XL. The post carries over the reliability and core qualities of the original. Infinitely smooth adjustment and incredible value for money make the Ascend II the go to dropper post for those riders that require external routing.The post comes with an ergonomic 1X lever. The cable is actuated from the mid cap ensuring zero cable movement. For those wishing to run a 2X set up, a right-hand mount 'paddle' lever is available. The Ascend Dropper seatpost set new standards for reliability and performance at a fantastic price point.
Brand-X's Ascend Dropper Seatpost was so good they decided to super-size it: the Ascend XL Dropper Seatpost offers longer travel for the long-legged rider or for those who prefer a greater scope of adjustment. Operated easily via a paddle style remote, this aluminium dropper seatpost lets the rider customise their saddle height for the trail ahead. Material: T651-7075 AluminiumBar mounted paddle style remote lever and cable operated internal routingLinkage mechanism eliminates any outer cable pullZero offset, one-piece head/upper shaft with micro adjust clamping mechanismOnly compatible with internally routed bikesLength: 498mmTravel: 170mm or 200mmCable Length: 1.5mFinish: Sand blasted and hard anodisedWarranty: 2 yearsWeight: 595g (w/o cable and shifter (30.9mm)The Ascend Dropper Seatpost set the benchmark for reliability and performance at an excellent price point, a proud tradition that the Ascend XL Dropper Seatpost will carry on. This Brand-X Ascend Dropper Seatpost features an ergonomic remote lever that has been designed to run from where your front shifter normally sits. Ideally suited for those running a 1x chainring transmission without a front derailleur. However, a paddle style shifter is available aftermarket for those who want to use the Ascend XL Dropper Seatpost with a front derailleur and shifter. The seatpost is cable actuated at the bottom of the post via a linkage mechanism which eliminates cable pull/movement, to ensure consistent performance time and time again.
The Brand-X Ascend II is an externally routed dropper seatpost that offers excellent performance and reliability without breaking the bank. Tweak your saddle height for what lies ahead and tackle the trail in comfort.Material: T6-6061 AluminiumBar mounted paddle style remote lever and cable operated external routingLinkage mechanism eliminates any outer cable pullZero offset, one-piece head/upper shaft with micro adjust clamping mechanismLength: 400mmTravel: 125mm (27.2mm = 105mm travel)Cable Length: 1.5mFinish: Sand blasted and hard anodisedWarranty: 2 yearsWeight: 610g (30.9mm) w/o cable and paddle shifter (90g)Building on the success of the Ascend Dropper Seatpost, this aluminium dropper post is available for those who have a rig without internal cable routing: Brand-X is bringing affordable and reliable dropper posts to the people! With infinitely smooth adjustments and an ergonomic paddle style lever that can sit on the left or right of your cockpit, the Brand-X Ascend II Dropper Seatpost is the upgrade that your bike needs. To avoid cable movement/pull, this dropper seatpost's cable is actuated from the mid-cap and delivers consistent performance.Please Note: The 31.6 and 30.9 diameter options come with the 1x shifter style remote shown in the first image and are not suitable for use on bikes with 2X or 3X front gearing. The 27.2 diameter post comes with a 22.2 lever that is compatible with 2X or 3X front gearing.
The Ascend Dropper Seatpost offers excellent performance and reliability without breaking the bank. Its compatible with bikes that can use an internally routed dropper. The seatpost is cable actuated at the bottom of the post via a linkage mechanism which eliminates cable pull/movement, to ensure consistent performance time and time again.Material: AL7075-T651Bar mounted shifter style remote leverInfinitely adjustableCable operatedInternal routing onlyLinkage mechanism eliminates any outer cable pullZero Offset Head typeOne Piece head/Upper ShaftMicro Adjust clamping mechanism30.9mm or 31.6mm Diameter410mm/480mm Length120mm or 150mm TravelCable Length: 1.5mSand Blasted and Hard Anodised Black2 Year WarrantyWeight: 550g W/O Cable and Shifter (31.6mm, 120mm)The ergonomic shifter style remote lever is designed to be run where your front shifter would normally sit. This means that the Ascend Dropper is ideally suited for those using a 1x chain ring set up; without a front derailleur. However, a paddle style shifter is available aftermarket for those who want to use the Ascend dropper post with a front derailleur and shifter. The Ascend Dropper seatpost sets new standards for reliability and performance at a fantastic price point. Please note that it cannot be converted to external cable actuated.
The Ascend Dropper Seatpost offers excellent performance and reliability without breaking the bank. Its compatible with bikes that can use an internally routed dropper. The seatpost is cable actuated at the bottom of the post via a linkage mechanism which eliminates cable pull/movement, to ensure consistent performance time and time again.Material: AL7075-T651Bar mounted shifter style remote leverInfinitely adjustableCable operatedInternal routing onlyLinkage mechanism eliminates any outer cable pullZero Offset Head typeOne Piece head/Upper ShaftMicro Adjust clamping mechanism30.9mm or 31.6mm Diameter410mm/480mm Length120mm or 150mm TravelCable Length: 1.5mSand Blasted and Hard Anodised Black2 Year WarrantyWeight: 550g W/O Cable and Shifter (31.6mm, 120mm)The ergonomic shifter style remote lever is designed to be run where your front shifter would normally sit. This means that the Ascend Dropper is ideally suited for those using a 1x chain ring set up; without a front derailleur. However, a paddle style shifter is available aftermarket for those who want to use the Ascend dropper post with a front derailleur and shifter. The Ascend Dropper seatpost sets new standards for reliability and performance at a fantastic price point. Please note that it cannot be converted to external cable actuated.
The Ascend Dropper Seatpost offers excellent performance and reliability without breaking the bank. Its compatible with bikes that can use an internally routed dropper. The seatpost is cable actuated at the bottom of the post via a linkage mechanism which eliminates cable pull/movement, to ensure consistent performance time and time again.Material: AL7075-T651Bar mounted shifter style remote leverInfinitely adjustableCable operatedInternal routing onlyLinkage mechanism eliminates any outer cable pullZero Offset Head typeOne Piece head/Upper ShaftMicro Adjust clamping mechanism30.9mm or 31.6mm Diameter410mm/480mm Length120mm or 150mm TravelCable Length: 1.5mSand Blasted and Hard Anodised Black2 Year WarrantyWeight: 550g W/O Cable and Shifter (31.6mm, 120mm)The ergonomic shifter style remote lever is designed to be run where your front shifter would normally sit. This means that the Ascend Dropper is ideally suited for those using a 1x chain ring set up; without a front derailleur. However, a paddle style shifter is available aftermarket for those who want to use the Ascend dropper post with a front derailleur and shifter. The Ascend Dropper seatpost sets new standards for reliability and performance at a fantastic price point. Please note that it cannot be converted to external cable actuated.
Brand-X's Ascend Dropper Seatpost was so good they decided to super-size it: the Ascend XL Dropper Seatpost offers longer travel for the long-legged rider or for those who prefer a greater scope of adjustment. Operated easily via a paddle style remote, this aluminium dropper seatpost lets the rider customise their saddle height for the trail ahead. Material: T651-7075 AluminiumBar mounted paddle style remote lever and cable operated internal routingLinkage mechanism eliminates any outer cable pullZero offset, one-piece head/upper shaft with micro adjust clamping mechanismOnly compatible with internally routed bikesLength: 498mmTravel: 170mm or 200mmCable Length: 1.5mFinish: Sand blasted and hard anodisedWarranty: 2 yearsWeight: 595g (w/o cable and shifter (30.9mm)The Ascend Dropper Seatpost set the benchmark for reliability and performance at an excellent price point, a proud tradition that the Ascend XL Dropper Seatpost will carry on. This Brand-X Ascend Dropper Seatpost features an ergonomic remote lever that has been designed to run from where your front shifter normally sits. Ideally suited for those running a 1x chainring transmission without a front derailleur. However, a paddle style shifter is available aftermarket for those who want to use the Ascend XL Dropper Seatpost with a front derailleur and shifter. The seatpost is cable actuated at the bottom of the post via a linkage mechanism which eliminates cable pull/movement, to ensure consistent performance time and time again.
The Brand-X Ascend II is an externally routed dropper seatpost that offers excellent performance and reliability without breaking the bank. Tweak your saddle height for what lies ahead and tackle the trail in comfort.Material: T6-6061 AluminiumBar mounted paddle style remote lever and cable operated external routingLinkage mechanism eliminates any outer cable pullZero offset, one-piece head/upper shaft with micro adjust clamping mechanismLength: 400mmTravel: 125mm (27.2mm = 105mm travel)Cable Length: 1.5mFinish: Sand blasted and hard anodisedWarranty: 2 yearsWeight: 610g (30.9mm) w/o cable and paddle shifter (90g)Building on the success of the Ascend Dropper Seatpost, this aluminium dropper post is available for those who have a rig without internal cable routing: Brand-X is bringing affordable and reliable dropper posts to the people! With infinitely smooth adjustments and an ergonomic paddle style lever that can sit on the left or right of your cockpit, the Brand-X Ascend II Dropper Seatpost is the upgrade that your bike needs. To avoid cable movement/pull, this dropper seatpost's cable is actuated from the mid-cap and delivers consistent performance.Please Note: The 31.6 and 30.9 diameter options come with the 1x shifter style remote shown in the first image and are not suitable for use on bikes with 2X or 3X front gearing. The 27.2 diameter post comes with a 22.2 lever that is compatible with 2X or 3X front gearing.
The Brand-X Ascend II is an externally routed dropper seatpost that offers excellent performance and reliability without breaking the bank. Tweak your saddle height for what lies ahead and tackle the trail in comfort.Material: T6-6061 AluminiumBar mounted paddle style remote lever and cable operated external routingLinkage mechanism eliminates any outer cable pullZero offset, one-piece head/upper shaft with micro adjust clamping mechanismLength: 400mmTravel: 125mm (27.2mm = 105mm travel)Cable Length: 1.5mFinish: Sand blasted and hard anodisedWarranty: 2 yearsWeight: 610g (30.9mm) w/o cable and paddle shifter (90g)Building on the success of the Ascend Dropper Seatpost, this aluminium dropper post is available for those who have a rig without internal cable routing: Brand-X is bringing affordable and reliable dropper posts to the people! With infinitely smooth adjustments and an ergonomic paddle style lever that can sit on the left or right of your cockpit, the Brand-X Ascend II Dropper Seatpost is the upgrade that your bike needs. To avoid cable movement/pull, this dropper seatpost's cable is actuated from the mid-cap and delivers consistent performance.Please Note: The 31.6 and 30.9 diameter options come with the 1x shifter style remote shown in the first image and are not suitable for use on bikes with 2X or 3X front gearing. The 27.2 diameter post comes with a 22.2 lever that is compatible with 2X or 3X front gearing.
The Brand-X Ascend II is an externally routed dropper seatpost that offers excellent performance and reliability without breaking the bank. Tweak your saddle height for what lies ahead and tackle the trail in comfort.Material: T6-6061 AluminiumBar mounted paddle style remote lever and cable operated external routingLinkage mechanism eliminates any outer cable pullZero offset, one-piece head/upper shaft with micro adjust clamping mechanismLength: 400mmTravel: 125mm (27.2mm = 105mm travel)Cable Length: 1.5mFinish: Sand blasted and hard anodisedWarranty: 2 yearsWeight: 610g (30.9mm) w/o cable and paddle shifter (90g)Building on the success of the Ascend Dropper Seatpost, this aluminium dropper post is available for those who have a rig without internal cable routing: Brand-X is bringing affordable and reliable dropper posts to the people! With infinitely smooth adjustments and an ergonomic paddle style lever that can sit on the left or right of your cockpit, the Brand-X Ascend II Dropper Seatpost is the upgrade that your bike needs. To avoid cable movement/pull, this dropper seatpost's cable is actuated from the mid-cap and delivers consistent performance.Please Note: The 31.6 and 30.9 diameter options come with the 1x shifter style remote shown in the first image and are not suitable for use on bikes with 2X or 3X front gearing. The 27.2 diameter post comes with a 22.2 lever that is compatible with 2X or 3X front gearing.
The Ascend Dropper Seatpost offers excellent performance and reliability without breaking the bank. Its compatible with bikes that can use an internally routed dropper. The seatpost is cable actuated at the bottom of the post via a linkage mechanism which eliminates cable pull/movement, to ensure consistent performance time and time again.Material: AL7075-T651Bar mounted shifter style remote leverInfinitely adjustableCable operatedInternal routing onlyLinkage mechanism eliminates any outer cable pullZero Offset Head typeOne Piece head/Upper ShaftMicro Adjust clamping mechanism30.9mm or 31.6mm Diameter410mm/480mm Length120mm or 150mm TravelCable Length: 1.5mSand Blasted and Hard Anodised Black2 Year WarrantyWeight: 550g W/O Cable and Shifter (31.6mm, 120mm)The ergonomic shifter style remote lever is designed to be run where your front shifter would normally sit. This means that the Ascend Dropper is ideally suited for those using a 1x chain ring set up; without a front derailleur. However, a paddle style shifter is available aftermarket for those who want to use the Ascend dropper post with a front derailleur and shifter. The Ascend Dropper seatpost sets new standards for reliability and performance at a fantastic price point. Please note that it cannot be converted to external cable actuated.