The Troy Lee Designs Raid Knee Guards are hardy enough to offer you peace of mind on the gnarliest trails, but also comfortable and ventilated enough to be a pleasure to wear for a full day of shredding. Constructed from vented Neoprene, with D3O® reinforcement, the sleeve will defend your lower thigh, knee joint and shin. Thanks to strategically placed grippers, you can count on it to reinforce your leg in the areas where it’s most needed. In particular, this guard features abrasion resistant pads at the side and over the kneecap and offers side impact protection. The best knee guards are more than barriers, though, they’re wearable so that they’ll always be in place when you need them. The breathable mesh back, thoughtful areas of padding and adjustable fit of the Raid Knee Guard mean it will keep your leg dry, snug and protected.Meanwhile, a flex gusset will allow your leg to straighten without resistance, while a rear compression band stimulates the muscles and encourages function. As a further bonus, the Raid Knee Guard comes with its own protective, mesh lined bag that will keep it fresh between sessions.Key FeaturesD3O® liner CE certified to EN 1621-1 Level 1 standard,Made from vented Neoprene,Breathable, wicking mesh rear panel,Tough, abrasion-resistant kneecap and side pads, side impact protection,Held in place by silicone gripper band at upper leg,Reinforced by adjustable Velcro strap,Sold as a pair, left and right.
The Troy Lee Designs Rockfight CE Chest Protector isn’t your typical chest protector. TLD has taken its standard Rockfight but souped it up to withstand whatever the elements throw at you.The base Rockfight has built-in EPP on the chest and spine that manages low-speed impacts but the Rockfight CE combines it with a removable, flexible D30 back insert for harder impacts. In the process, Troy Lee Designs has created a chest protector that exceeds CE EN1621 Level 1 for impact absorptions.The Rockfight CE has a CE EN14021 Stone Shield certificated front plate providing protection from roost and lofted debris that might come flying your way on the trails.The Rockfight CE achieves its superb protection while ensuring an ergonomic and breathable design. It has form fit side plates, fully adjustable shoulder straps, and removable shoulder pads and allows neck brace compatibility on most models.The construction is also featherweight and with a streamlined fit for easy wearing underneath a jersey and to minimise fatigue, so you can keep riding all day.Key Features: CE EN14021 Stone Shield certification of front plate for proven protection from debris, Flexible D30 back inserts that exceed CE EN1621 Level 1 for impact absorption, Advanced integrated EPP in key impact zones on chest and spine, Form fit side flex plates, fully adjustable fore/aft shoulder straps and removable shoulder pads allows neck brace compatibility, Featherweight construction and streamlined form fit for reduced rider fatigue and sub jersey fitment, Ultra-ventilated protective plates coupled with engineered channelled bi-foam for increased laminar airflow.
The Troy Lee Designs UPL 7855 is a hot weather protective undershirt with a versatile pocket design protection system ideal for warm weather runs.
Customizable Under ArmorVersatile pocket design with removable protection armor pieces for ultimate rider customization (chest, back, rib cage, abdomen, shoulder, arms)UPL 7855 HW Shirt Features:Upper Protection Layer 7855 Hot Weather,Wide neck opening for added comfort,Opem armpit design for maximum ventilation and mobility,Anatomical design integrated protection zones,Integrates seamlessly with neck braces,Patent pending.
Packing a Protective Punch Weighing in at a gravity-defying 690 grams (size M/L), the Stage MIPS Helmet is the lightest full-face mountain bike helmet in its class. However, not for a moment should you think lightweight means lack of protection. Not a bit of it. The Stage packs a heavyweight flurry of protective punches too. To counter both slow and fast speed impacts it uses Dual-density EPS and EPP foam, absorbing impact forces should you take a tumble. It doesn't end there though. It also features brain-protecting MIPS technology, more detail on that further down. A tough outer Polylite shell optimises strength and adds overall durability - perfect for a helmet that will see a lot of use. A Polyacrilite injected chin bar with EXOskeleton also adds strength without sacrificing weight. Designed for Enduro but passing DH certification, you can be confident to push your mountain biking limits in this lid. MIPS (Multi-directional Impact Protection System) The Mips system is designed to provide added safety for helmets in many accidents. For certain impacts, the Mips system can reduce harmful rotational motion that might otherwise be transferred to the user’s head. Rotational motion is a common cause of concussions in oblique hits to the head. In a crash, the Mips system is designed to move slightly inside the helmet to help redirect forces away from the head. Shop All MIPS Helmets Click Here Comfort Built-in So protection is first-rate, what about comfort? Yes, that's fantastic too. 11 high-flow vents let fresh air rush into the Stage, with internal channelling and 14 exhaust ports creating perfect airflow. Uphill pedalling is now more cool and comfortable than ever. Inside, the contoured 3D XT2 cheek pads and washable X-Static liner create the perfect fit. And with 2 liners, 3-sets of cheek pads and 2-neck rolls you can always get the right fit and feel.
Troy Lee Designs Stage MIPS Helmet (Stealth)Featuring the latest in cutting-edge head protection technology, the Troy Lee Designs Stage MIPS Helmet lets you charge down your favourite mountain trails brimming with confidence. If it all goes wrong, you hit the dirt, it's got you covered. Lightweight Design. Heavyweight Protection.Coming in at a feathery light 690 grams (size M/L), the Stage MIPS Helmet certainly won't weigh you down as you speed down your favourite MTB trails. However, there's nothing lightweight about the protection it offers. The dual-density EPS and EPP foam core do a brilliant job of absorbing impact forces, be that a high-speed flow-trail crash or a low-speed technical trail tumble. These impact-absorbing foams are covered by a tough and durable Polylite shell with fibre reinforcement, ensuring this is a lid you can wear time after time, day after day and it will remain up to the task. The chance of brain injury is also reduced via the use of innovative MIPS technology. MIPS (Multi-directional Impact Protection System) The Mips system is designed to provide added safety for helmets in many accidents. For certain impacts, the Mips system can reduce harmful rotational motion that might otherwise be transferred to the user’s head.Rotational motion is a common cause of concussions in oblique hits to the head. In a crash, the Mips system is designed to move slightly inside the helmet to help redirect forces away from the head.Comfort Built-inSo protection is first-rate, what about comfort? Yes, that's fantastic too. 11 high-flow vents let fresh air rush into the Stage, with internal channelling and 14 exhaust ports creating perfect airflow. Uphill pedalling is now more cool and comfortable than ever. Inside, the contoured 3D XT2 cheek pads and washable X-Static liner create the perfect fit. And with 2-liners, 3-sets of cheek pads and 2-neck rolls you can always get the right fit and feel. Features:Polylite Shell construction with fibre reinforcementDual-density EPS and EPP foam offers protection against high and low-speed impactsFeaturing MIPS Brain Protection System - a helmet integrated, low friction layer designed to reduce rotational motion transferred to the brain from angled impacts to the headLarge ventilation chin bar opening and 11 high-flow intake ports and 14 exhaust ventsContoured 3D XT2 cheek pads and washable X-Static liner create an optimized fitThe helmet includes 2-liners, 3-sets of cheek pads and 2-neck rolls for a custom fitInnovative break-away visor screwsFidlock® magnetic buckle systemDrawstring bag with breathable mesh panellingCPSC 1203*, CE EN1078*, ASTM F1952-DH, ASTM 2032-BMX, *Varies by regional standardsShop all MIPS helmets - Click hereBuy Troy Lee Designs from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Troy Lee Designs Stage full face helmet with MIPS is a lighter, cooler and more protective enduro racing package than anything previously created.The Stage combines MIPS (Multi-directional Impact Protection System), EPP (for slow speed impacts) and EPS (for high-speed impacts) in one sleek package, that sets the standard for mountain bike enduro helmets.A Polylite shell with fibre reinforcement and Polyacrilite injected chin bar with EXOskeleton adds strength without sacrificing weight.11 high-flow air intakes and 14 exhaust ports and large ventilation chin bar openings aid in cooling and comfort in all conditions.The TLD Stage Helmet also includes an X-Static® helmet liner that is moisture-wicking, quick-drying and odor-fighting. A Fidlock® buckle and lightweight hardware round out the overall package.Key FeaturesPolylite Shell construction with fibre reinforcement,Dual-density EPS and EPP foam offers protection against high and low-speed impacts,Featuring MIPS Brain Protection System: a helmet integrated, low friction layer designed to reduce rotational motion transferred to the brain from angled impacts to the head,Large ventilation chin bar opening and 11 high-flow intake ports and 14 exhaust vents,Contoured 3D XT2 cheek pads and washable X-Static liner create an optimized fit,Innovative break-away visor screws,Fidlock® magnetic buckle system,Includes TLD helmet bag.
The Ruckus shorts feature a redesigned waistband with a new double button enclosure. The shorts distinctive two-way rear stretch panel is repositioned, with slim, easy-to-pull adjuster tabs available to fine-tune fit The redesigned Ruckus line now uses fabric that is certified as Bluesign® approved, utilizing materials produced by eco-friendly methods that conserve resources and minimize impact on the environment. So, ride with confidence not only in your gear's performance but its environmental footprint. Key Features: All mountain, enduro gear designed to be universal for any type of rider,High durability for the racer type rider,TLD Race Fit - Mid-rise waist, roomier cut with a balance of performance and durability,Rear two-way stretch panel fabricated from new breathable mesh material and repositioned for improved articulation ,New contoured waistband designed for all-day comfort and durability, with laser perforated rear offering enhanced ventilation ,Modern cut short with performance construction,6 hour pad liner for long rides .
Let’s face it, climbing mountains and catapulting yourself back downhill is the eighth wonder of the world. In order to dominate the beaten path you need the perfect form of safety, and that’s where the D3 Fiberlite comes in. The ultimate offroad warrior, Troy Lee Designs have incorporated the best features of their D3 Carbon and Composite designs to create a hybrid worthy of any mountain bike aficionado. Extremely lightweight, it offers high-end protection to your head without breaking the bank. For the comfort enthusiast amongst you this helmet really does set the tone. It is well ventilated thanks to its 20 high-flow intake ports and six exhausts that maximise the flow of air around the head. Wind-tunnel tested, it has already proved its aerodynamic ability and the efficient ventilation system works hand-in-hand with the ports to help you avoid sweat. Keeping you focused as you line up the mother of all kickers, the D3 Fiberlite has been crafted from a lightweight fibreglass shell, the lid weighs in at just 1225g and provides a luxurious fitting thanks to the specially-sized 3D cheek pads. Allowing for the padded interior liner to be removed should you wish to wash it and freshen up, the D3 is one of the comfiest forms of protection on the market. Raise The Standards Working night and day to make the D3 race-ready, Troy Lee Designs have certainly raised the bar when it comes to their latest creation. If the unthinkable should happen and you suffer a fall, the pads can be removed with a lever to provide an easy exit from the helmet. If the comfort and protection levels weren’t enough, there is race-style graphics to ensure you standout from the crowd while there is also a drawstring helmet sock to keep your new pride and joy safe should you for some reason not be out shredding. Bragging a reputation as ‘The most decorated helmet in professional racing’, the D3 Fiberlite is no doubt one of the finest forms of protection you can partner with during your offroad session.
Troy Lee Designs D3 Fiberlite Helmet - Mono BlackThe ultimate bodyguard for your head when shredding the trail, Troy Lee Designs’ D3 Fiberlite Helmet offers outstanding protection without breaking the bank. Incorporating a host of race-derived features from the D3 Carbon and Composite, the Fiberlite is extremely lightweight and certainly packs a punch as you look to attack those tricky technical sections.A Signature HelmetIncredibly comfortable, well ventilated and designed for unrivalled aerodynamics, the D3 Fiberglass has taken on technology from its siblings to inspire your next ride with confidence. Crafted with a lightweight fibreglass shell, Troy Lee Designs have certainly ensured that performance isn’t compromised when focusing on protection. Having gone to great lengths to ensure the D3 is race ready, there are wind-tunnel proven aerodynamics and the efficient ventilation system works to maximise the flow of air around your head. Keeping you cool as your power transfers explode you into the berm, avoiding sweat and odours helps to maintain focus and comfort levels.Comfort in AbundanceIf the 20 high-flow intake ports and six exhausts weren’t enough, the padded interior liner is removable and washable for unrivalled freshness. High-end protection at an entry-level price, the D3 weighs in at just 1225 grams and offers an impressive fit thanks in no part to the specially-sized contoured 3D cheek pads. Should the unthinkable happen, the pads can be removed with a lever for an easy exit from the lid.Raising the standards of full-face helmets, the D3 really is a lid for the offroad warrior within. The race-style graphics ensure you stand out from the crowd while the signature design guarantees that the Fiberlite is finished to the highest of standards. ‘The most decorated helmet in professional racing’, the D3 Fiberlite is perfect for riders that crave the ultimate form of protection when shredding morning, noon and night. Features:Digital wind tunnel-tested, aerodynamic shell designRevolutionary injection-moulded air intake systemLightweight Fiberglass shell construction20 high-flow intake and exhaust ports for maximum ventilationAdded eps and new head form shape for improved impact performanceFull incremental sizing for greater range of fitmentDeep eps channelling for optimal airflowRemovable, washable padded liner with coolmax™ and dri-lex™ moisture wicking materialsContoured 3d cheek pads fit anatomicallyQuick-release cheek pads for emergency helmet removalPurpose-built internal cavities for audio integrationStainless steel chinstrap D-rings are light and strongIncludes TLD drawstring helmet sockExceeds bicycle certifications: ASTM F1952-15, ASTM F2032-15Not intended for use with motorised vehiclesBuy Troy Lee Designs from Chain Reaction Cycles, the World's Largest Online Bike Store.
Troy Lee Designs D3 Fiberlite Helmet - Mono BlackThe ultimate bodyguard for your head when shredding the trail, Troy Lee Designs’ D3 Fiberlite Helmet offers outstanding protection without breaking the bank. Incorporating a host of race-derived features from the D3 Carbon and Composite, the Fiberlite is extremely lightweight and certainly packs a punch as you look to attack those tricky technical sections.A Signature HelmetIncredibly comfortable, well ventilated and designed for unrivalled aerodynamics, the D3 Fiberglass has taken on technology from its siblings to inspire your next ride with confidence. Crafted with a lightweight fibreglass shell, Troy Lee Designs have certainly ensured that performance isn’t compromised when focusing on protection. Having gone to great lengths to ensure the D3 is race ready, there are wind-tunnel proven aerodynamics and the efficient ventilation system works to maximise the flow of air around your head. Keeping you cool as your power transfers explode you into the berm, avoiding sweat and odours helps to maintain focus and comfort levels.Comfort in AbundanceIf the 20 high-flow intake ports and six exhausts weren’t enough, the padded interior liner is removable and washable for unrivalled freshness. High-end protection at an entry-level price, the D3 weighs in at just 1225 grams and offers an impressive fit thanks in no part to the specially-sized contoured 3D cheek pads. Should the unthinkable happen, the pads can be removed with a lever for an easy exit from the lid.Raising the standards of full-face helmets, the D3 really is a lid for the offroad warrior within. The race-style graphics ensure you stand out from the crowd while the signature design guarantees that the Fiberlite is finished to the highest of standards. ‘The most decorated helmet in professional racing’, the D3 Fiberlite is perfect for riders that crave the ultimate form of protection when shredding morning, noon and night. Features:Digital wind tunnel-tested, aerodynamic shell designRevolutionary injection-moulded air intake systemLightweight Fiberglass shell construction20 high-flow intake and exhaust ports for maximum ventilationAdded eps and new head form shape for improved impact performanceFull incremental sizing for greater range of fitmentDeep eps channelling for optimal airflowRemovable, washable padded liner with coolmax™ and dri-lex™ moisture wicking materialsContoured 3d cheek pads fit anatomicallyQuick-release cheek pads for emergency helmet removalPurpose-built internal cavities for audio integrationStainless steel chinstrap D-rings are light and strongIncludes TLD drawstring helmet sockExceeds bicycle certifications: ASTM F1952-15, ASTM F2032-15Not intended for use with motorised vehiclesBuy Troy Lee Designs from Chain Reaction Cycles, the World's Largest Online Bike Store.
Troy Lee Designs D3 Fiberlite Helmet - Mono BlackThe ultimate bodyguard for your head when shredding the trail, Troy Lee Designs’ D3 Fiberlite Helmet offers outstanding protection without breaking the bank. Incorporating a host of race-derived features from the D3 Carbon and Composite, the Fiberlite is extremely lightweight and certainly packs a punch as you look to attack those tricky technical sections.A Signature HelmetIncredibly comfortable, well ventilated and designed for unrivalled aerodynamics, the D3 Fiberglass has taken on technology from its siblings to inspire your next ride with confidence. Crafted with a lightweight fibreglass shell, Troy Lee Designs have certainly ensured that performance isn’t compromised when focusing on protection. Having gone to great lengths to ensure the D3 is race ready, there are wind-tunnel proven aerodynamics and the efficient ventilation system works to maximise the flow of air around your head. Keeping you cool as your power transfers explode you into the berm, avoiding sweat and odours helps to maintain focus and comfort levels.Comfort in AbundanceIf the 20 high-flow intake ports and six exhausts weren’t enough, the padded interior liner is removable and washable for unrivalled freshness. High-end protection at an entry-level price, the D3 weighs in at just 1225 grams and offers an impressive fit thanks in no part to the specially-sized contoured 3D cheek pads. Should the unthinkable happen, the pads can be removed with a lever for an easy exit from the lid.Raising the standards of full-face helmets, the D3 really is a lid for the offroad warrior within. The race-style graphics ensure you stand out from the crowd while the signature design guarantees that the Fiberlite is finished to the highest of standards. ‘The most decorated helmet in professional racing’, the D3 Fiberlite is perfect for riders that crave the ultimate form of protection when shredding morning, noon and night. Features:Digital wind tunnel-tested, aerodynamic shell designRevolutionary injection-moulded air intake systemLightweight Fiberglass shell construction20 high-flow intake and exhaust ports for maximum ventilationAdded eps and new head form shape for improved impact performanceFull incremental sizing for greater range of fitmentDeep eps channelling for optimal airflowRemovable, washable padded liner with coolmax™ and dri-lex™ moisture wicking materialsContoured 3d cheek pads fit anatomicallyQuick-release cheek pads for emergency helmet removalPurpose-built internal cavities for audio integrationStainless steel chinstrap D-rings are light and strongIncludes TLD drawstring helmet sockExceeds bicycle certifications: ASTM F1952-15, ASTM F2032-15Not intended for use with motorised vehiclesBuy Troy Lee Designs from Chain Reaction Cycles, the World's Largest Online Bike Store.