Built purely with winning in mind, these forks come equipped with a super-smooth performing Solo Air spring, which combines with the adjustable Motion Control damper to keep you in control and to maintain your speed over rough, technical terrain. XC Fork with Boost Spacing The SID World Cup's main weight saver is a 1-piece carbon steerer and crown for ultimate stiffness and responsiveness. When combined with Boost technology, this version of the SID World Cup can run wider tyres that increases traction, stability and grip. The Boost standard uses a wider and stiffer axle to wheel interface, which grants even greater performance. It features compression adjustment for fine-tuning and has been designed to achieve the perfect balance between stiffness, speed and weight. Additional Features: Damper Adjustment: Crown, remote (included) Fork Offset: 51mm Maxle Included: Maxle Stealth Manufacturer's Part Number: 00.4019.468.015 Please Note: Shock pump or service kit not included Technologies: Solo Air: Solo Air is like a Buddhist monk. Its enlightened design lets you add air to your forks through a single Schrader valve, filling both the positive and negative air spring chambers simultaneously. So they’re always in perfect equilibrium, like Yin and Yang. Giving you a plush, predictable ride you can set up in seconds, with the lightest weight air spring on the market Rapid Recovery: The Rapid Recovery System allows the shock to recover faster between consecutive bumps, letting the wheel track the ground with greater precision. This more active suspension system doesn’t pack up and enables the bike to ride in a higher and softer part of the spring rate. Rapid Recovery gives the rider access to more available wheel travel, bump after bump, to achieve a smoother and more controlled ride Motion Control XX: Motion Control damping is seamless, effective, and offers a simple low-speed compression adjustment coupled with a blow-off valve. The XX Motion Control DNA Damping features Rockox's XLoc Remote Lockout System, providing a lightweight and highly ergonomic high-speed solution Air Guides: RockShox print Air Guides on all their air-sprung forks. It will help you set up your suspension in seconds instead of minutes and more time on your bike equals more chances to earn King of the Mountain on your favourite trail. Boost: Boost is the standard wheel and drivetrain specification that opens the opportunity for improved frame geometry with shorter chainstays, wider and stiffer suspension pivots, a wider range of chainring options, as well as more clearance for bigger tyres and wider, stiffer wheels. Maxle Stealth: Who knew RockShox could make a thru axle disappear? The updated Maxle Stealth offers a light, low profile alternative to Maxle Lite and Maxle Ultimate
Key Features:Speeds: 11/12,BB Compatibility: DUB:BSA73, PF89.5, PF92, PF30 MTB73, BB30 MTB73, BSA MTB68SP,Chainring Size: 34,Crank arm length: 170mm, 175mm,Chainline: 49.0mm,BB Spindle Interface: DUB,Chainring Material: Aluminum,Guard: No Guard,Bolt Circle Diameter (BCD): Direct Mount (DM),Crank arm material: Carbon,Color (Crank arm): Grey.
True competitors are always looking for a performance advantage — a relentless pursuit of equipment that is lighter, stiffer, stronger and more durable. To create the best drivetrain possible, we re-examined and re-engineered our crankset design. Our all-new XX1 Eagle™ CARBON TUNED™ crankset is our lightest, stiffest and strongest to date. DUB™ technology enhances this by simplifying the relationship of the spindle to the bottom bracket, and redefining the measure of durability. DUB-powered cranksets mean simplicity, compatibility and durability.Eagle™ represents our newest 1x drivetrain technologies Eagle™ is a lighter, tougher, quieter, more durable and more precise drivetrains Eagle™ features all-new 1x components, engineered for even greater durability and performance Eagle™ has a significant weight advantage over other drivetrains Eagle™ technology allows an expanded, optimum, 500-percent gear range — a 20-percent increase over our other 1xKey Features:DUB™ technology delivers the lightest, stiffest, strongest crankset available ,All-new SRAM CARBON TUNED™ crank technology provides extreme stiffness and light weight ,All-new chainring technology is designed specifically for Eagle™ chains and drivetrains ,The X-SYNC 2™ chainring provides significantly quieter performance, with better mud clearing and extraordinary durability,Speeds: 11/12,BB Compatibility: DUB BSA MTB 100, DUB PF MTB 121, DUB BSA73, DUB PF89.5, DUB PF92, DUB PF30 MTB73, DUB BB30 MTB73,Chainring Size: 30, 34,Crank arm length: 170mm, 175mm,Chain line: 49.0mm, 52.0mm, 66.5mm, 76.5mm,BB Spindle Interface: DUB,Chainring material: Aluminium,Guard: No Guard,Bolt Circle Diameter (BCD): Direct Mount (DM),Crank arm material: Carbon,Colour (Crank arm): Black, Gold.
RockShox SID XX World Cup Solo Air ForkBoasting 32mm 7000 series straight wall aluminium upper stanchions, this XC suspension fork is built for toughness and durability on every ride. RockShox has also kitted out its upper stanchions with a low friction anodised finish for additional protection against wear and corrosion, making it perfect for riding and racing in all weather conditions. Another highlight is its magnesium lower legs, which deliver a superior strength-to-weight ratio for maximum stiffness, without adding any unnecessary excess weight to your ride.Solo AirThis suspension fork features a Solo Air air spring. Solo Air's enlightened design lets you add air to your forks through a single Schrader valve, filling both the positive and negative air spring chambers simultaneously. So, they're always in perfect equilibrium, like Yin and Yang. Giving you a plush, predictable ride, you can set up in seconds, with the lightest weight air spring on the market.Motion Control XXMotion Control damping is seamless, effective, and offers a simple low-speed compression adjustment coupled with a blow-off valve. The XX Motion Control DNA Damping features RockShox's XLoc Remote Lockout System, providing a lightweight and highly ergonomic high-speed solution.Features: Upper Tubes Material: 32mm 7000 Series Straight Wall Aluminium, Low Friction Anodised Lower Legs Material: Magnesium Use: Cross Country (XC) Steerer Diameter: 1 1/8-1.5" tapered (Carbon Fibre, tapered) Travel: 100mm Axle Size: 15x100mm Air Spring: Solo Air Damping: Motion Control Brake Type: Disc brake compatible Remote Included: YesBuy RockShox Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Already a legend in its time, the SRAM RED Exogram Crankset is now available with refreshed graphics to compliment our new SRAM RED eTap componentry. The SRAM RED Exogram crankset features a completely hollow construction all the way to the spider. Its hidden bolt pattern makes better use of carbon fiber to further improve stiffness and shed weight. As always, for seamless, flawless performance and Yaw compatibility, pair this crank with X-GlideR chainrings.Exogram™ technology uses a large, hollow cross section all the way to the spider, minimizing weight while maximizing stiffness.,Our stiffest crank ever,Hidden bolt pattern leverages the characteristics of carbon fiber while presenting a sleek appearance,Stiffer X-GlideR™ chainrings feature thicker construction and advanced shift timing pins and ramps, which are optimized for shifting with the Yaw™ Front Derailleur,ISO 4210 compliant..
The SRAM Rival 1 crankset delivers consistent performance every time out. Featuring SRAM's X-SYNC tooth profile, the Rival 1 crankset is engineered for complete chain control. Each tooth's thickness is CNC-machined to work seamlessly with the chain's inner and outer links. And with seven available chain rings, you can personalize your gear range to match the way you ride.
A pressing tool for headset cups, bearing and bearing cups featuring quick-release design for fast tool installation and removal.Compatible with 1", 1-1/8", 1-1/4", and 1-1/2" headset cups, one-piece crank bottom bracket cups.Specification:Material: Alloy steel.,Size: 45.5 x 29 x 5 cm.,Includes: Two pcs of BB inserts OD 45mm / ID 30mm..
Easy and accurately align and press headset bearing cups into framesTotally eliminates damaged or misaligned bearing cupsStepped bushings give a precise fit from 1 inch cups all the way to 1.5 inch cupsA quick release design allows for instant removal after cups are seatedHeat treated and nickel-plated to give trouble-free serviceExtra long handles for ease of operation and superior leverageCan also be used to press cartridge bearings into Bottom bracket shells
Park Tool Bearing Cup Press HHP-2A multi-purpose, quick-release device for fast and easy installation and removal, The Park Tool Bearing Cup Press HHP-2 offers fantastic leverage and accuracy when aligning and pressing headsets and cartridge cups in to place. Accurate and Efficient Pressing ToolThe ideal implement for aligning and pressing 1", 1 ⅛", 1 ¼", and 1.5" headset cups, this Park Tool press will also securely fit cartridge bearings and cups firmly in to one-piece bottom bracket shells. Featuring extra long handles for exceptional leverage when loosening and tightening and stepped bushings to ensure the perfect cup alignment is achieved, the HHP-2 can also be used for keeping fixed cup wrenches secure while your remove or install adjustable-type BBs. The Bearing Cup Press HHP-2 is a brilliant bit of kit for all of your pressing needs. Features: Compatibility: 1", 1⅛", 1¼", and 1.5" Headset Cups Maximum Working Length: 315 mm Inlcuded with Press: 530-2 Adaptors for Aligning 1" and 1-1/8" Pressed Headsets (Stepped At 25.7, 29.7, and 32.8 mm)Buy Park Tool Workshop Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Park Tool HHP2 Head and Hanger Cup Press accurately aligns and presses 1 , 1-1/8 , 1-1/4 , and 1.5 headset cups. In addition, it presses cartridge bearings and cups into one-piece bottom bracket shells and holds fixed cup wrenches firmly in place when removing or installing adjustable-type bottom brackets. Features a quick-release design for fast tool installation and removal, extra long (30cm) handles for superior leverage, and stepped bushings for precise cup alignment.
Easy and accurately align and press headset bearing cups into frames Totally eliminates damaged or misaligned bearing cups Stepped bushings give a precise fit from 1 inch cups all the way to 1.5 inch cups A quick release design allows for instant removal after cups are seated Heat treated and nickel-plated to give trouble-free service Extra long handles for ease of operation and superior leverage Can also be used to press cartridge bearings into bottom bracket shells Made in the USA and covered by Park Tool's legendary limited lifetime warranty
SRAM Rival 22: Rival Your LimitsYour needs aren't less demanding. They're different.The new SRAM Rival 22 groupset delivers immense performance across a broad variety of bikes and disciplines. Paved or not. Cyclocross or triathlon. Road racing or unchartered journeys. Rival 22 gives the ergonomics, efficiency and technology for finely tuned cyclists to meet each challenge and expand their limits.Dedicated cyclists' demands are different not less than the pro's. Their demands change and evolve with their riding and performance, whether they're race ready or adventure ready. So why settle for a group that's simply ratcheted-down to 75 percent of what the pros ride? Rival 22 delivers 100 percent of what cyclists demand.Arm Material: Forged Aluminium Arms/ Machined Alloy Spider,Chainring Material: Machined Alloy Rings,Weight: 873g (BB30 172.5mm 52x36 BB not included)/ 857g (GXP 172.5mm 52x36 BB not included),Available Arm Lengths: 165mm, 167.5mm, 170mm, 172.5mm, 175mm, 177.5mm,Available Ratios: 52/36, 50/34, 46/36,Compatibility: SRAM RED 22, Force 22 & Rival 22 Yaw Front Derailleurs/ SRAM PC 1170 & PC 1130 chains,Recommended Chain: SRAM PC 1130 chain,Technology Highlight(S): X-Glide R chainrings/ Hidden Bolt configuration.