The highline remote features a unique spherical adjustment, with near-infinite rotation and tilt customisation options, for perfect cockpit ergonomics.Key Features:Pivot remote lever allows optimal ergonomic placement,Ergonomic spherical adjustment - 360 degree rotation / 22 degree tilt,Single bolt hinge locking system,Universal mounting system: top / bottom / left / right.
FSA Armset compatible with YAMAHA PWX, BOSCH GEN4 engineKey Features: Forged AL6061/T6 crank arms ,Length: 165, 170, 175mm ,ISIS Drive ,Anodized black, laser graphics .Specification:Discipline - E-Bike ,Material: Forged AL6061/T6,Weight: 450g (pair).
The crankbrothers candy is an iconic pedal designed by Carl and Frank, the original founders of crankbrothers, they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question, Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal, and later it was adapted into the candy pedal. The Candy is really diverse and is used by a wide range of riders. We have seen them out on the trail, at cyclocross races and even on commuter bikes. The cage around the 4 point engagement system inspires confidence and offers a great alternative to the eggbeater pedal if you want more of a pedal body surface area.Key Features:Cleat: Premium brass cleats included,Shims: Included,Release Angle: 15° to 20°,Warranty: 2 years,Weight: 272g per pair,Spindle: Forged scm435 chromoly steel,Body: one piece composite,Wings: Stamped steel,Spring: 300 series stainless steel,Inner bearing: Bushing,Outer bearing: Cartridge,Maximum rider weight: No restrictions,Colours: Black, Blue, Red or Neon Green.As with the rest of the crankbrothers range the pedals are fully serviceable with a level 1 / 2 service kit (product code CRB-11729). Servicing is simple and does not require any specialist tools, just a flat head screwdriver, socket wrench and 8mm allen key to hold the pedal by the axle. We recommend that the pedal is cleaned and greased every 30 hours of riding and the bearings are inspected for wear.
Providing optimum leverage from their sturdy, tubular design, each arm features a one-piece spindle/ sprocket boss for accurate and efficient sprocket alignment.
Stolen Talon V2 Cranks The Talon V2 Cranks are Stolen's mid-level cranks and are designed to be extremely strong but with budget in mind. The crank arms are extruded from hardened, seamless 4130 CrMo with a one-piece spindle/sprocket boss for precision sprocket alignment.Features: Material: 4130 CrMo Tubular arms Hollow 48-spline, heat treated spindle Left or right hand drive compatible Weight: 992gBuy Stolen Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Stolen Talon V2 Cranks The Talon V2 Cranks are Stolen's mid-level cranks and are designed to be extremely strong but with budget in mind. The crank arms are extruded from hardened, seamless 4130 CrMo with a one-piece spindle/sprocket boss for precision sprocket alignment.Features: Material: 4130 CrMo Tubular arms Hollow 48-spline, heat treated spindle Left or right hand drive compatible Weight: 992gBuy Stolen Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
crankbrothers Candy 1 Clipless MTB PedalsReady to tear up the toughest trails, the tough and versatile Candy 1 clipless mountain bike pedals make the most of each crank rotation. Their open design sheds mud easily and with four-sided engagement, you can simply stamp your foot down to connect. Plus, the 10-degree release angle gives the ideal amount of float for position changes and easy disengagement. crankbrothers has made them from a light but tough composite that’s combined with stainless steel wings and a Chromoly (CrMo) axle, so they can withstand plenty of abuse and come back for more.Features: Body Material: One-piece CompositeAxle Material: Forged SCM435 high strength Chromoly (CrMo)Axle Size: Standard 9/16" threadSpring Material: 300 series Stainless SteelWing Material: Stamped SteelEnd Cap: SlottedBearings: Inner: Igus LL-glide bearing; Outer: Enduro cartridge bearingCleats: Premium Shimano Pedalling Dynamics (SPD) type Brass cleats with shims includedCleats Included: YesQ-Factor: 52mmRelease Angle: 10°Use: Cross Country (XC), Trail, Cyclocross (CX) and GravelRibbed body for better traction when unclippedFour-sided entry and superior mud sheddingCustomisable float & release anglePremium bearings & double seal systemSnap-on traction pad technology to customise and optimise the shoe/pedal interface (available separately)Alternative cleats available for increased release angle of 15° (sold separately)Warranty: 5 yearsWeight: 294g per pairBuy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
crankbrothers Candy 1 Clipless MTB PedalsReady to tear up the toughest trails, the tough and versatile Candy 1 clipless mountain bike pedals make the most of each crank rotation. Their open design sheds mud easily and with four-sided engagement, you can simply stamp your foot down to connect. Plus, the 10-degree release angle gives the ideal amount of float for position changes and easy disengagement. crankbrothers has made them from a light but tough composite that’s combined with stainless steel wings and a Chromoly (CrMo) axle, so they can withstand plenty of abuse and come back for more.Features: Body Material: One-piece CompositeAxle Material: Forged SCM435 high strength Chromoly (CrMo)Axle Size: Standard 9/16" threadSpring Material: 300 series Stainless SteelWing Material: Stamped SteelEnd Cap: SlottedBearings: Inner: Igus LL-glide bearing; Outer: Enduro cartridge bearingCleats: Premium Shimano Pedalling Dynamics (SPD) type Brass cleats with shims includedCleats Included: YesQ-Factor: 52mmRelease Angle: 10°Use: Cross Country (XC), Trail, Cyclocross (CX) and GravelRibbed body for better traction when unclippedFour-sided entry and superior mud sheddingCustomisable float & release anglePremium bearings & double seal systemSnap-on traction pad technology to customise and optimise the shoe/pedal interface (available separately)Alternative cleats available for increased release angle of 15° (sold separately)Warranty: 5 yearsWeight: 294g per pairBuy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The crankbrothers candy is an iconic pedal designed by Carl and Frank the original founders of crankbrothers they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal and later it was adapted into the candy pedal. The Candy is really diverse and is used by a wide range of riders. We have seen them out on the trail at cyclocross races and even on commuter bikes. The cage around the 4 point engagement system inspires confidence and offers a great alternative to the eggbeater pedal if you want more of a pedal body surface area. Cleat: Premium brass cleats included Shims: Included Release Angle: 15° to 20° Warranty: 2 years Weight: 272g per pair Spindle: Forged scm435 chromoly steel Body: one piece composite Wings: Stamped steel Spring: 300 series stainless steel Inner bearing: Bushing Outer bearing: Cartridge Maximum rider weight: No restrictions Colours: Black Blue Red or Neon Green As with the rest of the crankbrothers range the pedals are fully serviceable with a level 1 / 2 service kit (product code CRB-11729). Servicing is simple and does not require any specialist tools just a flat head screwdriver socket wrench and 8mm allen key to hold the pedal by the axle. We recommend that the pedal is cleaned and greased every 30 hours of riding and the bearings are inspected for wear.
The eggbeater's simple design gives the advantage of amazing mud shedding and 4 points of entry making it perfect for XC trail riding and cyclo cross. The crankbrothers eggbeater is an iconic pedal designed by Carl and Frank the original founders of crankbrothers they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal and later it was adapted into the candy pedal. Cleat: Premium brass cleats included Shims: Included Release Angle: 15° to 20° Warranty: 2 years Weight: 286g per pair Spindle: Forged scm435 chromoly steel Body: stamped steel Wings: Stamped steel Spring: 300 series stainless steel Inner bearing: Bushing Outer bearing: Cartridge Maximum rider weight: No restrictions Colours: Silver/Black or Silver/Red As with the rest of the crankbrothers range the pedals are fully serviceable with a level 1 / 2 service kit (product code CRB-11729). Servicing is simple and does not require any specialist tools just a flat head screwdriver socket wrench and 8mm allen key to hold the pedal by the axle. We recommend that the pedal is cleaned and greased every 30 hours of riding and the bearings are inspected for wear.
Featuring a universal presta/schrader head and large analog gauge. Details Large stable steel base and tube Universal presta/schrader head Ergonomic handle with hidden needle & inflator Large analog gauge in base Extended hose length Specs pressure 160 psi / 11 bar warranty 5 Years
Compatible with most cable-actuated dropper posts. Universal mounting system — top or bottom left or right Single bolt hinge locking system Infinite spherical adjustment 360° rotation / 22° tilt