Key Features:Tough genuine Shimano toolsHardened steel for longevity and durability.
Use this conversion kit to fit standard Hollowtech II (or compatible) cranks to fit into a BB30 Bottom Bracket. The shims press directly into the BB30 (6086) bearings and you can then slide your crank axle through as though it were a normal HT2 Bottom Bracket. Removal is easy too, you may need to lightly tap out the shims from the bearing.
The Crank Brothers Candy 1 Pedals are an iconic pedal designed by Carl and Frank, the original founders of Crank Brothers, they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated .It started with a simple question: what is the best way to attach a shoe to a crank To answer this question, Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal, and later it was adapted into the candy pedal. Cleat: Premium brass cleats includedShims: IncludedRelease Angle: 15° to 20°Warranty: 2 yearsWeight: 272g per pairSpindle: Forged scm435 chromoly steelBody: one piece compositeWings: Stamped steelSpring: 300 series stainless steelInner bearing: BushingOuter bearing: CartridgeMaximum rider weight: No restrictionsColours: Black, Blue, Red or Neon GreenThe Candy 1 is really diverse and is used by a wide range of riders. We have seen them out on the trail, at cyclocross races and even on commuter bikes. The cage around the 4-point engagement system inspires confidence and offers a great alternative to the eggbeater pedal if you want more of a pedal body surface area. As with the rest of the Crank Brothers range the pedals are fully serviceable with a level 1 / 2 service kit (product code CRB-11729). Servicing is simple and does not require any specialist tools, just a flat head screwdriver, socket wrench and 8mm allen key to hold the pedal by the axle. We recommend that the pedal is cleaned and greased every 30 hours of riding and the bearings are inspected for wear.
Choose to ride flat or clipped in. The new double shot 1 is Crank Brothers hybrid pedal designed half flat / half clip-in. Excellent mud shedding for when you re shredding. Moulded traction pins and diamond plate area provide grip and supportExcellent mud-shedding: machined pedal body helps further prevent mud cloggingFit adjustment: Crank Brothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately (link to these)Internals run on igus LL-glide bearing which has been exclusively formulated for Crank Brothers and Enduro bearings. It performs in even the most adverse conditions out on the trails.Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal.Weight (per pair): 331g Spindle: Forged scm 435 chromoly steel Body: Composite Wings: Stamped steel Spring: 300 series stainless steel Inner bearing: Igus LL-glide bearing Outer bearing: Enduro cartridge bearing Cleats: premium brass cleats included Pins: Moulded traction pins Release angle: 15° or 20° Warranty: 5 years
Excellent mud-shedding: machined pedal body helps further prevent mud clogging. Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately . Internals run on igus LL-glide bearing which has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal.
crankbrothers DoubleShot Mountain Bike PedalsDesigned for tackling tough mountain bike trails, the DoubleShot Pedals from crankbrothers are the best of both worlds, allowing you to ride clipped in or flat. Offering enhanced grip thanks to the moulded pins, the diamond plate pads give you exceptional traction and include a mud-shedding feature. Premium bearings and a double seal system make the Double Shot a durable pedal. With the excellent build quality, comes a 5-year crankbrothers warranty.Features:Hybrid pedal, suitable for riding flat or clipped in Moulded pins and ribs give grip whilst diamond plate pads give traction 2-sided entry Superior mud-shedding capabilities Premium bearings and double seal system make this a durable option Premium brass cleats with shims included Material: A380 aluminiumCleats: Premium brass cleats with shims includedInner Bearing Type: Igus LL-glide bearingOuter Bearing Type: Enduro cartridge bearingRelease Angle: 15°/20° Q-Factor: 52mm Spindle Material: Forged SCM 435 Chromoly steelSpring Material: 300 series stainless steelWing Material: Stamped steelWarranty: 5 yearsWeight: 395g per pairBuy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Race Face E-Bike MTB CrankRace Face has answered the call to the increasing popularity of E-bikes by modifying its rock-solid Aeffect crank arm specifically for E-bike riders. This model benefits from increased clearance while still optimising its Q-factor, and a completely redesigned spline interface to maximise strength. This is an ideal choice of upgrade for a solid and reliable riding experience.Features: Material: 6066 T6 Aluminium Intended Use: XC/Trail/AM Compatibility: Compatible with all Bosch E-bike motors Arm Length: 170mm Optimised Q-Factor Extended spline interface for clearance of additional E-bike motor enclosuresBuy Race Face Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
crankbrothers Doubleshot 1 Clipless MTB PedalsA versatile pedal for the multi-terrain rider, these Crank Brothers pedals provide a superb clip-in experience when taken off-road while staying just as supportive when taking it easy through town. Comprising of a composite body and CrMo axle, each pedal features smooth and efficient bearings, diamond plate pads and moulded pins and ribs for enhanced grip. Coming complete with an easy release cleat kit, this pair is perfect for propelling you along your preferred route. Features: Body Material: Composite Axle Material: Forged 435 CrMo Wing Material: Stamped Steel Spring Material: 300 series Stainless Steel Release Angle: 10° Q-Factor: 57mm Bearings: Inner: Igus LL-glide bearing; Outer: Enduro cartridge bearing Pins: 6 per side, adjustable Cleat: Easy release cleat kit included Weight: 331g per pair Buy Crank Brothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
crankbrothers Doubleshot 1 Clipless MTB PedalsA versatile pedal for the multi-terrain rider, these Crank Brothers pedals provide a superb clip-in experience when taken off-road while staying just as supportive when taking it easy through town. Comprising of a composite body and CrMo axle, each pedal features smooth and efficient bearings, diamond plate pads and moulded pins and ribs for enhanced grip. Coming complete with an easy release cleat kit, this pair is perfect for propelling you along your preferred route. Features: Body Material: Composite Axle Material: Forged 435 CrMo Wing Material: Stamped Steel Spring Material: 300 series Stainless Steel Release Angle: 10° Q-Factor: 57mm Bearings: Inner: Igus LL-glide bearing; Outer: Enduro cartridge bearing Pins: 6 per side, adjustable Cleat: Easy release cleat kit included Weight: 331g per pair Buy Crank Brothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Description will appear here shortly...
Affordable 3-piece cranks from Jet. The key cranks are aimed at the younger, beginner rider who doesnt have the money to spend out on the top of the range cranks. The key cranks feature tubular 4130 chromoly heat treated arms with single pinch bolt, crmo 8 spline spindle and come in right side drive only. ###section### Product Specs Crank Type:3pc Spindle Diameter:19mm Includes BB:No Weight:978g / 34.5oz ###shogun-image-section###
The Saker Cranks are designed to be an affordable 3-pc crank with tubular chromoly arms that have a single pinch bolt design. It uses a 19mm chromoly spindle with 8 splines. The cranks include a 19mm Mid BB with spacers. RHD/LHD compatible. ###section### Product Specs Type: 3pc Spindle Diameter: 19mm Drive Side: Left & Right Compatible Includes BB Bearings: Yes Weight: TBC ###shogun-image-section###