The design for the original crank brothers pedal began out of frustration. The founders of crank brothers, Carl and Frank, were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question, Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal, and later it was adapted into the candy pedal. A word on maintenance In order to keep your crank brothers pedals running smoothly, they recommend the following: clean pedals every 30 hours of riding remove the pedal body from the spindle and wipe it clean of any dirty grease apply fresh grease to the inside of the pedal before re-installing the spindle Pedal features: Excellent mud-shedding: the design is very open 4-sided entry: clip in on all 4 sides of the pedal, by pushing forward or pulling backwards on the Extremely lightweight: pedal design is very simple with only a few key parts Increased float: 6° of side-to-side rotational play. The float of the pedal allows for the rid Fit adjustment: crank brothers premium cleats can be adjusted for 10° release Customise the fit between your shoe and the pedal by using tread contact sleeves Crank brothers pedals are fully re-buildable for simple maintenance. There is a consistency in part When servicing this pedal, use the rebuild kit designed for level 1 & 2 pedals
Designed with a four-sided entry system, this professional level, titanium-made pairing gives a sturdy and secure performance, with their self-cleaning construction making sure mud and moisture build-up are kept at bay. Coming complete with brass cleats and mounting hardware, this hard-wearing pedal set is ideal for the rowdy mountain marauder.
crankbrothers Eggbeater 11 Ti MTB PedalsTake a sweet ride with the Eggbeater 11 Ti pedal. Weighing in at only 174g per pair, the 11 Ti features all titanium construction with Eggbeater's four-sided entry.The choice of mountain bike pros worldwide, these pedals shed mud like water off a duck. Super easy to service, making them an viable investment for seasons to come.Features: Titanium body, inner wing, sleeve and spindle for ultimate weight savings Low-profile design keeps the sole close to the spindle for a more powerful and efficient pedal stroke 6° of knee-saving float with a choice of a 15° or 20° release angle gives you a customized fit for all terrain 10mm needle bearing inner and cartridge bearing outer Brass cleat and mounting hardware included WEIGHT: 174g/pair Buy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
crankbrothers Eggbeater 2 MTB PedalsThe Eggbeater 2 pedal is slightly lighter than its brother the Eggbeater 3. Features Crank Brother's exclusive, four-sided entry, mud shedding design, and weight saving minimalism.Features: Cast stainless body and spring with steel spindle add strength and stability without a weight penalty Low-profile design delivers a more powerful and efficient pedal stroke 6° of knee-saving float with a choice of a 15 or 20° release angle gives you a customized fit for the trail Delrin bushing inner and cartridge bearing outer Plastic end caps Brass cleat and mounting hardware included Weight: 272g/pair Buy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The design for the original crank brothers pedal began out of frustration. The founders of crank brothers, Carl and Frank, were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question, Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal, and later it was adapted into the candy pedal. A word on maintenance In order to keep your crank brothers pedals running smoothly, they recommend the following: clean pedals every 30 hours of ridingremove the pedal body from the spindle and wipe it clean of any dirty greaseapply fresh grease to the inside of the pedal before re-installing the spindle
Features: Minimal and lightweight Four-sided entry and superior mud shedding Customisable float & release angle Hex alloy end cap Premium bearings & double seal system
crankbrothers Mallet 2 MTB PedalsDual material pedal DH/Race with stamped steel wings. Adjustable pins for custom traction control.Features:Weight: 495g per pairSpindle: forged scm435 chromoly steelPlatform: two piece aluminum nylon bodyWings: stamped steelSpring: 300 series stainless steelSpindle: forged scm435 chromoly steelInner bearing: bushingOuter bearing: cartridgeRelease angle: 15° - 20°Cleats: premium brassManufacturers Warranty: 5 years Warning: Polycarbonate is incompatible with anaerobic liquids. Do NOT use any non-Polycarbonate approved thread locking solvent (such as Loctite 242) on any part of this pedal or cracking could occur. Loctite 380 or 401 is approved for use on all bolts and pins. Buy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Mallet DH are the pedal of choice by most Pro World Cup riders.
crankbrothers Mallet 3 Clipless Mountain Bike PedalsThe crankbrothers Mallet 3 Pedals are now even more durable with a lightweight aluminium inner body and premium bearings.Features:Flat pedal feel with clipped-in controlAluminium platform for enhanced durability6 adjustable pins per side for grip 4-sided entry / superior mud sheddingCustomisable float & release anglePremium bearings & double seal systemSpecifications:Spindle Material: Forged SCM 435 CrMo steelBody Material: AluminiumWing Material: 17-4PH stainlessSpring Material: 300 series stainless steelQ-factor: 52mmInner Bearing type: Igus LL-glide bearingOuter Bearing type: Enduro cartridge bearingCleat: Premium brass cleats with shims includedWeight: 499g per pairBuy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
crankbrothers Mallet 3 Clipless Mountain Bike PedalsThe crankbrothers Mallet 3 Pedals are now even more durable with a lightweight aluminium inner body and premium bearings.Features:Flat pedal feel with clipped-in controlAluminium platform for enhanced durability6 adjustable pins per side for grip 4-sided entry / superior mud sheddingCustomisable float & release anglePremium bearings & double seal systemSpecifications:Spindle Material: Forged SCM 435 CrMo steelBody Material: AluminiumWing Material: 17-4PH stainlessSpring Material: 300 series stainless steelQ-factor: 52mmInner Bearing type: Igus LL-glide bearingOuter Bearing type: Enduro cartridge bearingCleat: Premium brass cleats with shims includedWeight: 499g per pairBuy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The ideal pedal for those wanting the feel of a flat pedal with the security of being clipped in.