The Wolf Tooth Direct Mount Chainring for Race Face Cinch is not only beautifully machined and lightweight but utilises a patented wide-narrow design that is perfectly suited to 1x setups – dropped chains are a thing of the past. Unlock your dream drivetrain configuration and satisfy your inner tweaker.Bred from ice-cold Minneapolis winters and explicitly designed to work perfectly with Race Face Cinch cranks, this direct mount chainring means more time riding and less time fumbling with dropped chains.In line with Wolf Tooth’s guiding ethos of providing unrivalled design innovation, reliability and durability, this chainring employs a patented Drop-Stop® wide-narrow tooth profile which not only keeps the chain securely in place on single chainring setups but dislodges mud, dirt and excess precipitation more efficiently. For additional security in extreme conditions, this chainring is best used with a clutch-type rear derailleur.Synonymous with ultra-high-end custom builds and stalwart steeds alike, Wolf Tooth chainrings are machined entirely in-house at Wolf Tooth’s HQ in Minnesota, USA. The anodised finish and machined lettering that adorn every chainring bear the hallmark of master craftsmanship.If you’re a discerning cyclist looking to invest in a premium-grade chainring that’ll outlast its competitors and function perfectly on a 1x set up, this is the only way to go.Compatibility:Any Race Face Cinch™ system crankset.,Wolf Tooth’s patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability,Both standard (142mm rear hub spacing) and Boost (148mm hub spacing) offsets available. ,For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle),Compatible with all 10, 11, and 12-speed chains except Shimano 12-speed chains.,If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention).,Chainline: Standard Offset 49mm for 26-34t, 51mm for 36t (additional chainstay clearance),Chainline: Boost Offset 52mm .
Truvativ /2628-teeth Chainring made of aluminium. Ideal for mountain bike. 4 Bolt, 80 mm bolt centre diameter 4 Bolt, 26/28-teeth Chainring,Made of aluminium,Ideal for mountain bike,80 mm Bolt centre diameter (BCD).
TruVativ 4 arm bolt kit suitable for Double with RockGuard or chainring guard. Made of steel. Bolt kit comes with 12.5 mm long nuts. Kit includes two sets of bolts: one set is 8 mm long, the other is 9.5 mm. RockGuard bolt position. Available in black colour.Bolt for rock guard or chainring guard,Made of steel,Includes two sets of bolts: 8 bolt of size 8 mm long and 4 bolts of size 9.5 mm length,12.5 mm nut length.
Truvativ Chainring Bolt Kit 5 Arm for Triple Steel
Truvativ 39 tooth 4 bolt MTB bike chainring. Made of aluminium. A super tough and long lasting inner chainring. 2x10 shifting technology. 120 mm bolt circle diameter (BCD). You can grace your bike with the benefits of single-ring. Good quality, long lasting ring.4 Bolt long pin chainring,Made of aluminium,39 tooth for 120 mm bolt circle diameter (BCD),Long pin option for use with GXP only.
Key Features:2x11 Speed,Outer Chainring Mounting - Direct Mount,Inner Chainring Mounting - Bolts,Precision CNC machined AL7075/T6,Shifting ramps and stainless steel pins on outer and inner rings,Anodized black with CNC silver,Laser etched logos.
Precision CNC machined A7075/T6,Shifting ramps and stainless steel pins for outer and middle rings,Black anodised with CNC details,Laser etched logos,Available in Shimano 10 speed (N10).
TA only make their chainrings from the best 7075 T6 heat treated aluminium sheet. The teeth are cut in the traditional manner on a lathe which produces a much better and more accurate tooth form than pressing which is used by most chainring manufacturers.Nerius for Campag 11x only, can convert Some Campag Carbon 10x chainsets to 11x.,Can be fitted to Super Record, Record, Chorus, Athena and Centaur chainsets.,Weights: 34T 29g to 50T 78g.
Key Features:9, 10, 11, & 12spd eagle - these chainrings are designed to work with all 9 speed, 10 speed, and 11 speed chains. They also work with 12 speed eagle and 12 speed kmc chain. They do not work with shimano 12 speed hyperglide+ chain or sram 12 speed flattop chain.,If using a 9-speed drivetrain use a 10-speed chain. It fits tighter for better chain retention.
Truvativ 42t 5 Bolt 130mm BCD Triple Steel Matte Black (52-42-30) Chainring Road
Stages Power Right for Shimano Dura-Ace 9100 or Ultegra R8000 is a right side only power meter that will transform new and existing Gen 2 Stages Power meters into a dual-sided power option.Specifications:Accuracy: ± 1.5%,Weight: Only less than 15gr to base crank arm,Battery Life: 200+ hours (coin cell: CR2032),Power range (Watts): 0 - 2500,Cadence range (rpm): 20 - 220,Water resistance rating: IPX7,Frame Compatibility: Most frames, see fit guide in our Support section,Chainring Compatibility: 53 x39, 52x36, 50x34,Device Compatibility: ANT+, Bluetooth Smart Ready,Software Compatibiity: Stages Link, Today's Plan, Training Peaks, Strava, Garmin Training Center and others,Tool free battery replacement,Active temperature compensation,Accelerometer based cadence measurement,Wireless firmware upgrades.
The Wolf Tooth Elliptical 110 BCD 4 Bolt Chainring for Shimano GRX is not only beautifully machined and lightweight but utilises a patented wide-narrow design that is perfectly suited to 1x setups – dropped chains are a thing of the past. Unlock your dream drivetrain configuration and satisfy your inner tweaker.Bred from ice-cold Minneapolis winters and explicitly designed to work perfectly with Shimano GRX drivetrains, this Wolf Tooth 110 BCD Chainring means more time riding and less time fumbling with dropped chains.In line with Wolf Tooth’s guiding ethos of providing unrivalled design innovation, reliability and durability, this chainring employs a patented Drop-Stop® wide-narrow tooth profile which not only keeps the chain securely in place on single chainring setups but dislodges mud, dirt and excess precipitation more efficiently. For additional security in extreme conditions, this chainring is best used with a clutch-type rear derailleur.Synonymous with ultra-high-end custom builds and stalwart steeds alike, Wolf Tooth chainrings are machined entirely in-house at Wolf Tooth’s HQ in Minnesota, USA. The anodised finish and machined lettering that adorn every chainring bear the hallmark of master craftsmanship.PowerTracWolf Tooth’s PowerTrac Elliptical (PTE) design, as the name indicates, is driven by a concern for power and traction – and crucially for you, premised on a wealth of knowledge from precision engineers who also love to ride bikes.A growing number of riders are converting to elliptical chainrings on 1x setups for the simple reason that they have been demonstrated to improve ride quality.The idea behind elliptical chainrings can be summarised as follows: biomechanical power output varies throughout a pedal stroke, at positions where power is higher, having a larger diameter section of chainring, and thus greater engagement area, translates into greater forward propulsion. At positions where biomechanical power is lower, a smaller chainring diameter means greater efficiency in rotation. Overall what this means for you is maximised power output throughout each pedal stroke.Wolf Tooth note that elliptical rings also mean steadier torque on the rear wheel as there is less spinning on the downstroke and easier rotation in between these. Steadier torque on the rear wheel gives better traction and sustained momentum – great on tough climbs and through headwinds.If you’re a discerning cyclist looking to invest in a premium-grade chainring that’ll outlast its competitors and function perfectly on a 1x set up, this is the only way to go. Key Features: Patented Drop-Stop® wide-narrow tooth profile for minimised dropped chains,Elliptical design,Perfect for 1x setups,Machined in-house at Wolf Tooth’s HQ in Minnesota, USA,Beautiful anodised finish,. Compatibility: Shimano GRX cranksets including RX600 and RX810, Drop-Stop® FT tooth profile is compatible with 9, 10, 11 and 12-speed chains (including SRAM Flattop),Not compatible with Shimano HG+ 12-speed chains .